aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/services
Commit message (Collapse)AuthorAgeFilesLines
...
* uhttpd: update to git HEADDaniel Golle2020-11-231-4/+4
| | | | | | f53a639 ubus: fix uhttpd crash Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: set validity interval for BSS TMRADavid Bauer2020-11-171-1/+1
| | | | | | | | | | | | This sets the validity interval for the BSS transition candidate list to the same value as the disassociation timer. Currently the value is always 0, which is the specification states is a reserved value. Also, wpa_supplicant and from the looks of it some Android implementations will outright ignore the candidate list in this case. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add support for static airtime policy configurationDobroslaw Kijowski2020-11-172-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add support for passing airtime_sta_weight into hostapd configuration. * Since that commit it is possible to configure station weights. Set higher value for larger airtime share, lower for smaller share. I have tested this functionality by modyfing /etc/config/wireless to: config wifi-device 'radio0' ... option airtime_mode '1' config wifi-iface 'default_radio0' ... list airtime_sta_weight '01:02:03:04:05:06 1024' Now, when the station associates with the access point it has been assigned a higher weight value. root@OpenWrt:~# cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/stations/01\:02\:03\:04\:05\:06/airtime RX: 12656 us TX: 10617 us Weight: 1024 Deficit: VO: -2075 us VI: 256 us BE: -206 us BK: 256 us [MAC address has been changed into a dummy one.] Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* hostapd: fix per-BSS airtime configurationDobroslaw Kijowski2020-11-172-1/+3
| | | | | | | | airtime_mode is always parsed as an empty string since it hasn't been added into hostapd_common_add_device_config function. Fixes: e289f183 ("hostapd: add support for per-BSS airtime configuration") Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* hostapd: ubus: add get_status methodDavid Bauer2020-11-171-0/+40
| | | | | | | This adds a new get_status method to a hostapd interface, which provides information about the current interface status. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add VHT capabilities to client listDavid Bauer2020-11-171-0/+71
| | | | | | | This adds parsed VHT capability information to the hostapd get_clients method. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add driver information to client listDavid Bauer2020-11-171-0/+24
| | | | | | | | This adds information from mac80211 to hostapd get_client ubus function. This way, TX as well as RX status information as well as the signal can be determined. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix variable shadowingDavid Bauer2020-11-171-0/+2
| | | | | | Fixes commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* umdns: convert seccomp filter rules to OCI formatDaniel Golle2020-11-172-31/+42
| | | | | | | procd-seccomp switched to OCI-compliant seccomp parser instead of our (legacy, OpenWrt-specific) format. Convert ruleset to new format. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* odhcpd: update to latest git HEADHans Dedecker2020-11-151-4/+4
| | | | | | fb55e80 dhcpv6-ia : write statefile atomically Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: update to 2.81Hans Dedecker2020-11-154-9/+7
| | | | | | | | Update dropbear to latest stable 2.81; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 1.0.20201112Jason A. Donenfeld2020-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | * noise: take lock when removing handshake entry from table This is a defense in depth patch backported from upstream to account for any future issues with list node lifecycles. * netns: check that route_me_harder packets use the right sk A test for an issue that goes back to before Linux's git history began. I've fixed this upstream, but it doesn't look possible to put it into the compat layer, as it's a core networking problem. But we still test for it in the netns test and warn on broken kernels. * qemu: drop build support for rhel 8.2 We now test 8.3+. * compat: SYM_FUNC_{START,END} were backported to 5.4 * qemu: bump default testing version The real motivation for this version bump: 5.4.76 made a change that broke our compat layer. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* dnsmasq: 'ipset' config sectionsAleksandr Mezin2020-11-112-1/+28
| | | | | | | | | | | | | | | | | | | | | | | Allow configuring ipsets with dedicated config sections: config ipset list name 'ss_rules_dst_forward' list name 'ss_rules6_dst_forward' list domain 't.me' list domain 'telegram.org' instead of current, rather inconvenient syntax: config dnsmasq ... list ipset '/t.me/telegram.org/ss_rules_dst_forward,ss_rules6_dst_forward' Current syntax will still continue to work though. With this change, a LuCI GUI for DNS ipsets should be easy to implement. Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dnsmasq: explictly set ednspacket_max valueJan Pavlinec2020-11-092-1/+2
| | | | | | | This is related to DNS Flag Day 2020. It sets default ends buffer size value to 1232. Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
* uhttpd: use P-256 for certsPaul Spooren2020-11-091-2/+2
| | | | | | | | | | | | The uhttpd package takes care of creating self-signed certificates if px5g is installed. This improves the security of router management as it encrypts the LuCI connection. The EC P-256 curve is faster than RSA which which improves the user experience on embedded devices. EC P-256 is support for as old devices as Android 4.4. Signed-off-by: Paul Spooren <mail@aparcar.org>
* hostapd: add a hostapd-basic-wolfssl variantRui Salvaterra2020-11-081-0/+13
| | | | | | | | | | | | If only AP mode is needed, this is currently the most space-efficient way to provide support for WPA{2,3}-PSK, 802.11w and 802.11r. openwrt-ath79-generic-ubnt_nanostation-loco-m-squashfs-sysupgrade.bin sizes: 4719426 bytes (with wpad-basic-wolfssl) 4457282 bytes (with hostapd-basic-wolfssl) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* dropbear: use new extra_command wrapperFlorian Eckert2020-11-022-3/+3
| | | | | | Use new `extra_command` wrapper to fix the alignement. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* odhcpd: fix compile problem on 64-bit systemsHans Dedecker2020-11-011-3/+3
| | | | | | | | 735c783 dhcpv6: fix size_t fields in syslog format Fixes 5cdc65f6d1 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to latest git HEADHans Dedecker2020-10-311-3/+3
| | | | | | | | | 5700919 dhcpv6: add explicit dhcpv4o6 server address e4f4e62 dhcpv6: add DHCPv4-over-DHCPv6 support aff290b dhcpv6: check message type 2677fa1 router: fix advertisement interval option Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* hostapd: enable OWE for the basic-{openssl, wolfssl} variantsRui Salvaterra2020-10-311-0/+6
| | | | | | | Opportunistic Wireless Encryption is needed to create/access encrypted networks which don't require authentication. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* hostapd: remove hostapd-hs20 variantDaniel Golle2020-10-301-18/+0
| | | | | | | | Hotspot 2.0 AP features have been made available in the -full variants of hostapd and wpad. Hence we no longer need a seperate package for that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add {hostapd,wpad}-basic-openssl variantsRui Salvaterra2020-10-302-0/+28
| | | | | | | | | Add OpenSSL-linked basic variants (which provides WPA-PSK only, 802.11r and 802.11w) of both hostapd and wpad. For people who don't need the full hostapd but are stuck with libopenssl for other reasons, this saves space by avoiding the need of an additional library (or a larger hostapd with built-in crypto). Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* hostapd: wpas: add missing config symbolsDavid Bauer2020-10-282-3/+3
| | | | | | | | | | | | | | | This adds missing config symbols for interworking as well as Hotspot 2.0 to the wpa_supplicant-full configuration. These symbols were added to the hostapd-full configuration prior to this commit. Without adding them to the wpa_supplicant configuration, building of wpad-full fails. Thanks to Rene for reaching out on IRC. Fixes: commit be9694aaa297 ("hostapd: add UCI support for Hotspot 2.0") Fixes: commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: install /etc/hotplug.d/ntp/25-dnsmasqsec world-readableDaniel Golle2020-10-281-2/+2
| | | | | | | | /etc/hotplug.d/ntp/25-dnsmasqsec is being sourced by /sbin/hotplug-call running as ntpd user. For that to work the file needs to be readable by that user. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: bump PKG_RELEASEDavid Bauer2020-10-281-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add interworking supportDavid Bauer2020-10-282-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | This adds configuration options to enable interworking for hostapd. All options require iw_enabled to be set to 1 for a given VAP. All IEEE802.11u related settings are supported with exception of the venue information which will be added as separate UCI sections at a later point. The options use the same name as the ones from the hostapd.conf file with a "iw_" prefix added. All UCI configuration options are passed without further modifications to hostapd with exceptions of the following options, whose elements can be provided using UCI lis elements: - iw_roaming_consortium - iw_anqp_elem - iw_nai_realm - iw_domain_name - iw_anqp_3gpp_cell_net Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add FTM responder supportDavid Bauer2020-10-281-0/+13
| | | | | | | | | | | | | | | This adds support for enabling the FTM responder flag for the APs extended capabilities. On supported hardware, enabling the ftm_responder config key for a given AP will enable the FTM responder bit. FTM support itself is unconditionally implemented in the devices firmware (ath10k 2nd generation with 3.2.1.1 firmware). There's currently no softmac implementation. Also allow to configure LCI and civic location information which can be transmitted to a FTM initiator. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: remove ieee80211v optionDavid Bauer2020-10-281-14/+6
| | | | | | | | | | | | | Remove the ieee80211v option. It previously was required to be enabled in order to use time_advertisement, time_zone, wnm_sleep_mode and bss_transition, however it didn't enable any of these options by default. Remove it, as configuring these options independently is enough. This change does not influence the behavior of any already configured setting. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: make rrm report independent of ieee80211k settingDavid Bauer2020-10-281-5/+4
| | | | | | | | Allow to configure both RRM beacon as well as neighbor reports independently and only enable them by default in case the ieee80211k config option is set. Signed-off-by: David Bauer <mail@david-bauer.net>
* umdns: update to version 2020-10-26Petr Štetiar2020-10-271-3/+3
| | | | | | | | | | | | | | | 59e4fc98162d cache: cache_answer: fix off by one 4cece9cc7db4 cache: cache_record_find: fix buffer overflow be687257ee0b cmake: tests: provide umdns-san binary bf01f2dd0089 tests: add dns_handle_packet_file tool 134afc728846 tests: add libFuzzer based fuzzing de08a2c71ca8 cmake: create static library cdc18fbb3ea8 interface: fix possible null pointer dereference 1fa034c65cb6 interface: fix value stored to 'fd' is never read 3a67ebe3fc66 Add initial GitLab CI support 50caea125517 cmake: fix include dirs and libs lookup Signed-off-by: Petr Štetiar <ynezz@true.cz>
* dnsmasq: include IPv6 local nameserver entryJoel Johnson2020-10-261-0/+1
| | | | | | | | | For IPv6 native connections when using IPv6 DNS lookups, there is no valid default resolver if ignoring WAN DHCP provided nameservers. This uses a runtime check to determine if IPv6 is supported on the host. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
* busybox: make username consistentDaniel Golle2020-10-251-1/+1
| | | | | | | | | ntpd in packages feed had already a user 'ntp' with UID 123 declared. Rename the username of busybox-ntpd to be 'ntp' instead of 'ntpd' so it doesn't clash. Reported-by: Etienne Champetier <champetier.etienne@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: adapt to non-root ntpdDaniel Golle2020-10-252-1/+10
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uhttpd: adapt defaults for changes ubus.sock pathDaniel Golle2020-10-223-2/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: ubus: add handler for wps_status and guard WPS callsDaniel Golle2020-10-163-1/+57
| | | | | | | | | Expose WPS ubus API only if compiled with WPS support and add new handler for wps_status call. Also add '-v wps' option to check whether WPS support is present in hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ppp: update to version 2.4.8.git-2020-10-03Hans Dedecker2020-10-051-3/+3
| | | | | | | 2937722 Enable IPv6 by default (#171) 6d39c65 pppd: Fix blank password usage Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: update to latest Git HEADJo-Philipp Wich2020-10-041-3/+3
| | | | | | | | | | | | | 14a3cb4 ubus: fix legacy empty reply format 0f38b03 client: fix spurious keepalive connection timeouts 88ba2fa client: really close connection on timeout c186212 ubus: support GET method with CORS requests Fixes: FS#3369 Fixes: https://github.com/openwrt/luci/issues/4467 Fixes: https://github.com/openwrt/luci/issues/4470 Fixes: https://github.com/openwrt/luci/issues/4479 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: add support for specifying a per-device scan listFelix Fietkau2020-09-291-0/+1
| | | | | | | This is useful to bring up multiple client mode interfaces on a single channel much faster without having to scan through a lot of channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: fix handling ignore condition for dnssecYousong Zhou2020-09-252-1/+2
| | | | | | | | | | It should return false to indicate that the option should not be ignored Fixes 064dc1e8 ("dnsmasq: abort when dnssec requested but not available") Reported-by: Sami Olmari <sami@olmari.fi> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dnsmasq: support tftp_unique_root in /etc/config/dhcpW. Michael Petullo2020-09-242-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The TFTP server provided by dnsmasq supports serving a select boot image based on the client's MAC or IP address. This allows an administrator to activate this feature in /etc/config/dhcp. Here is an example /etc/config/dhcp that configures dnsmasq with --tftp-unique-root=mac: ... config dnsmasq option enable_tftp 1 option tftp_root /usr/libexec/tftpboot option tftp_unique_root mac config boot router option serveraddress 192.168.1.1 option servername tftp.example.com option filename openwrt-initramfs-kernel.bin ... With this configuration, dnsmasq will serve /usr/libexec/tftpboot/00-11-22-33-44-55/openwrt-initramfs-kernel.bin to the client with MAC address 00:11:22:33:44:55. Signed-off-by: W. Michael Petullo <mike@flyn.org>
* hostapd: ubus: make (B)SSID optional for neighbor reportDavid Bauer2020-09-222-10/+25
| | | | | | | | | | | Make the BSSID and SSID fields optional when configuring a neighbor report into hostapd. Both options can now be an empty string. For the BSSID, the first 6 byte are copied from the neighbor report. For the SSID, the SSID for the affected hostapd BSS is used. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: send notification instead of eventDavid Bauer2020-09-222-12/+13
| | | | | | | | | | | Rafal Milecki pointed out that ubus events are meant for low-level ubus events only (e.g. addition or removal of an object). Higher level events should happen as notifications on the ubus object itself. Dispatch BSS events on the main hostapd ubus object instead of publishing them as ubus events. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: fix infinite loop when configuring RRM NRDavid Bauer2020-09-212-3/+2
| | | | | | | The return-code was set, however it was never returned, nor was the loop interrupted. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: send procd event on BSS updateDavid Bauer2020-09-212-4/+36
| | | | | | | Dispatch ubus events also to procd in order to trigger service reloads on hostapd updates. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: send ubus event on BSS updateDavid Bauer2020-09-212-2/+24
| | | | | | | | | | | hostapd will emit a ubus event with the eventname hostapd.<ifname>.<event> when adding, removing or reloading a BSS. This way, services which install state (for example the RMM neighbor list) can on-demand reinstall this information for the BSS without polling this state. Signed-off-by: David Bauer <mail@david-bauer.net>
* odhcpd: number UCI defaults scriptStijn Segers2020-09-211-1/+1
| | | | | | | | | UCI defaults scripts are supposed to be numbered, but odhcpd's lacked numbering, which turned out to mess up my custom scripts numbered 9[0-9]_*. The idea is to have high number (custom) scripts executed last. Jow confirmed numbering is the default case, not the exception (thanks). Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* uhttpd: update to the latest masterRafał Miłecki2020-09-181-3/+3
| | | | | | 47c34bd ubus: add ACL support for "subscribe" request Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uhttpd: update to the latest masterRafał Miłecki2020-09-151-3/+3
| | | | | | | | 1172357 ubus: add new RESTful API fe1888f ubus: fix blob_buf initialization Fixes: 3d167ed805a9 ("uhttpd: update to the latest master") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: add support for per-BSS airtime configurationDavid Bauer2020-09-113-4/+14
| | | | | | | | | | | | Add support for per-BSS airtime weight configuration. This allows to set a airtime weight per BSS as well as a ratio limit based on the weight. Support for this feature is only enabled in the full flavors of hostapd. Consult the hostapd.conf documentation (Airtime policy configuration) for more information on the inner workings of the exposed settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* openvpn: fix shell compare operator in openvpn.initMartin Schiller2020-09-092-2/+2
| | | | | | | | Don't use bash syntax, because /bin/sh is used here. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 02:45:04 +0000