aboutsummaryrefslogtreecommitdiffstats
path: root/package/utils
Commit message (Collapse)AuthorAgeFilesLines
* ravpower-mcu: add missing PKG_RELEASEDavid Bauer2020-07-061-0/+1
| | | | | | This fixes the imagebuilder for this device. Signed-off-by: David Bauer <mail@david-bauer.net>
* package: add ravpower-mcu packageDavid Bauer2020-06-291-0/+34
| | | | | | | This package allows to read battery status information and control the power state of the RAVPower RP-WD009 power management IC. Signed-off-by: David Bauer <mail@david-bauer.net>
* logger: enable alternatives supportHuangbin Zhan2020-06-261-2/+3
| | | | | | Avoid conflict with busybox Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* exfat-utils: move into packages feedRosen Penev2020-06-031-69/+0
| | | | | | | | | | This will be moved to packages: https://github.com/openwrt/packages/pull/12378 Signed-off-by: Rosen Penev <rosenp@gmail.com> [commit subject facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* xfsprogs: move into packages feedRosen Penev2020-06-036-210/+0
| | | | | | | | | Does not seem to be needed here. This will be imported into packages. Ref: https://github.com/openwrt/packages/pull/12256 Signed-off-by: Rosen Penev <rosenp@gmail.com> [subject facelift, PR ref] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ugps: nmea: make sure date is validDaniel Golle2020-05-291-3/+3
| | | | | | | | | | | GPS time without date was previously used to set system date: Tue Oct 10 11:48:21 2000 user.info kernel: [ 108.786639] ugps: system time differs from GPS time by more than 5 seconds. Using 2000-10-10T10:48:21 UTC as the new time Tue Oct 10 11:49:27 2000 user.info kernel: [ 174.794699] ugps: system time differs from GPS time by more than 5 seconds. Using 2020-05-26T10:49:27 UTC as the new time Fix this by ignoring incomplete dates and wait for complete time information before adjusting system date/time. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2020-05-282-2/+79
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-userland: update to latest version with 64 bit supportÁlvaro Fernández Rojas2020-05-281-2/+2
| | | | | | | | Support for 64 bits has been remove on latest master of raspberry/firmware. Update to latest commit with 64 bit support since we don't support installing 32 bit packages on 64 bit targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* packages/utils: fbtest fix MakefileThibaut VARÈNE2020-05-281-1/+1
| | | | | | | | | The clean target tries to remove what looks like a bogus 'rbcfg', probably carried over copy-pasta. Remove the name of the generated executable ('fbtest') instead. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Fixes: 8099f4e0d3af ("fbtest utility ")
* fuse: move package to packages feedRosen Penev2020-05-204-154/+0
| | | | | | | | | | This package was last updated in 2016. All of the dependent packages are in the packages feeds, where this will be moved. Ref: https://github.com/openwrt/packages/pull/12190 Signed-off-by: Rosen Penev <rosenp@gmail.com> [commit subject/description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* package/utils: remove rbextractThibaut VARÈNE2020-05-086-895/+0
| | | | | | | | | | | | Rationale: 1/ This tool is no longer necessary following the implementation of a sysfs driver 2/ The upstream author, Robert Marko, stated[1] that this tool had been taken from his tree in an unfinished state not suitable for merging [1] https://github.com/openwrt/openwrt/pull/2850#issuecomment-610277863 Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ugps: nmea: fix time comparisionDaniel Golle2020-04-291-4/+4
| | | | | | | Fix bug causing system time to be set over and over again, and causing massive log pollution. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* upgs: Remove extra _DEFAULT_SOURCE definitionHauke Mehrtens2020-04-181-4/+0
| | | | | | | | | | | | | | | This extra _DEFAULT_SOURCE definition results in a double definition which is a compile error. This fixes the following compile error with glibc: ---------------------------------------------------------------------- ugps-2019-06-25-cd7eabcd/nmea.c:19: error: "_DEFAULT_SOURCE" redefined [-Werror] #define _DEFAULT_SOURCE <command-line>: note: this is the location of the previous definition cc1: all warnings being treated as errors Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: backport Remove stime() function callsHauke Mehrtens2020-04-181-0/+84
| | | | | | | glibc 2.31 does not provide stime() any more, backport a fix from current busybox master to avoid using this function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Update to 1.45.6Daniel Engberg2020-04-091-2/+2
| | | | | | Update e2fsprogs to 1.45.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* exfat-utils: add exFAT File System utilities packageDaniel Golle2020-04-091-0/+69
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: quote 'source' filenames in Config.inEneas U de Queiroz2020-04-093-24/+24
| | | | | | | Newer versions of the kconfig program requires quoting the arguments of the 'source' directive. These are the last ones not using them. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2020-03-231-2/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* busybox: enable truncate on bcm53xx targetRafał Miłecki2020-03-211-0/+1
| | | | | | | It's needed for optimized sysupgrade. On host machine this change increased busybox size by 4096 B. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2020-02-282-14/+8
| | | | | | Remove upstream cmake fix. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* rbextract: support devices with plain RLE caldataRoger Pueyo Centelles2020-02-262-2/+14
| | | | | | | | | | | | Old MikroTik devices have the RLE-encoded radio calibration data directly stored in the art (hard_config) partition, without LZO compression nor any preceding ERD magic bytes. This commit adds a fallback for these devices. Tested on the ath79 target with a MikroTik SXT 5nD r2 (SXT Lite5), only locally --not yet merged upstream--. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* package/utils/f2fs-tools: Update to 1.13.0Daniel Engberg2020-02-223-63/+4
| | | | | | | | Update f2fs-tools to 1.13.0 Remove upstreamed patches Disable build of static library Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* usbmode: Update modeswitch data to 20191128Davide Fioravanti2020-02-221-2/+2
| | | | | | Add support for new hardware Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* util-linux: Update to 2.35.1Daniel Engberg2020-02-203-6/+6
| | | | | | | | Update util-linux to 2.35.1 and refresh patches. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [commit subject and description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* brcm2708: rename target to bcm27xxAdrian Schmutzler2020-02-142-9/+9
| | | | | | | | | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm47xx: rename target to bcm47xxAdrian Schmutzler2020-02-142-3/+3
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rbextract: support devices directly showing ERD magicRoger Pueyo Centelles2020-01-232-1/+30
| | | | | | | | | Older ath79-based MikroTik devices have the ERD calibration data compressed and stored different to newer IPQ40xx ones. This commit adds support for these former ones. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* rbextract: add packageRoger Pueyo Centelles2020-01-236-0/+854
| | | | | | | | | This utility extracts the radio calibration data, as well as other board-related information (model, serial number, etc.), from MikroTik Routerboard devices' flash. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* busybox: fix build issuesJohn Crispin2020-01-151-1/+3
| | | | | Fixes: f704f97e4c57 ("busybox: Include hdparm by default on nas type device") Signed-off-by: John Crispin <john@phrozen.org>
* busybox: Include hdparm by default on nas type deviceLinus Walleij2020-01-151-0/+3
| | | | | | | | | NAS devices certainly need to have hdparm to configure things like spin-down time or their disks will be constantly spinning. Just catenate CONFIG_HDPARM=y on these configs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* e2fsprogs: update to version 1.45.4Josef Schlehofer2020-01-052-206/+3
| | | | | | | | Removed backported patch Release notes: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.45.4 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* brcm2708-userland: add new package with RPi utilsÁlvaro Fernández Rojas2019-12-282-0/+75
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: Remove self from MAINTAINER entriesFlorian Fainelli2019-12-231-1/+0
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* adb: fix for SuperSpeed devicesBjørn Mork2019-12-233-2/+41
| | | | | | | | | | | | | | The USB descriptor parsing in adb fails to detect SuperSpeed devices because of the SuperSpeed Endpoint Companion Descriptor. This cherry-picks the upstream fix for the problem. Unfortunately there never were a release with this fix before the conversion to C++, so upgrading to a newer version isn't an option. This makes adb work with SuperSpeed devices like the Sierra Wireless EM7565. Tested and verified. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* busybox: add glibc dependency for vi regex optionSatadru Pramanik2019-11-301-1/+2
| | | | | | | | | | | | | | | | | | Build with musl libc fails with BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH enabled. Enabling BusyBox's vi regex search option depends upon GNU regex. Musl libc does not support GNU regex[1]. So this patch adds explicit dependency on GNU libc and while at it remove the FIXME comment. 1. https://wiki.musl-libc.org/functional-differences-from-glibc.html Ref: https://dev.archive.openwrt.org/ticket/21741.html Ref: https://forum.openwrt.org/t/busybox-not-compiling/ Ref: https://github.com/openwrt/packages/issues/4453 Signed-off-by: Satadru Pramanik <satadru@umich.edu> [commit subject/description tweaks, From: fix, USE_GLIBC fix, removed comments] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* e2fsprogs: Fix CVE-2019-5094 in libsupportHauke Mehrtens2019-11-222-1/+204
| | | | | | | | This adds the following patch from debian: https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/commit/?h=debian/stable&id=09fe1fd2a1f9efc3091b4fc61f1876d0785956a8 libsupport: add checks to prevent buffer overrun bugs in quota code Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xfsprogs: Fix compilation with newer muslRosen Penev2019-11-093-6/+49
| | | | | | Backported upstream patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* busybox: update to 1.31.1Hannu Nyman2019-11-091-2/+2
| | | | | | | | | | | Update busybox to 1.31.1 Small bug fix release. Fixes for dc, ash (PS1 expansion fix), hush, dpkg-deb, telnet and wget. No need to refresh patches or config. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* busybox: disable default config option FEATURE_SUID=yHenrique de Moraes Holschuh2019-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | Commit ad7c6102f209 ("busybox: fix missing install with suid bit set if FEATURE_SUID=y") actually fixes BUSYBOX_CONFIG_FEATURE_SUID option and thus would install busybox setuid root by default which would result in possibly unwanted change of current behaviour, so let's disable this option by default in order to preserve the current status-quo. For the record: disabling FEATURE_SUID to preserve the status-quo does *not* imply the current status-quo is "safer", or for that matter, in any way desireable. That is a discussion to be had on the mailing lists. Switching the FEATURE_SUID default to "n" is simply a compromise to facilitate the merge of the changes that unbreak FEATURE_SUID. Ref: PR#2502 Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br> [commit title/description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* busybox: fix missing install with suid bit set if FEATURE_SUID=yHenrique de Moraes Holschuh2019-11-071-0/+3
| | | | | | | | | | | | | | | | | | | | With FEATURE_SUID=y one can install busybox binary belonging to root with the suid bit set, enabling some applets to perform root-level operations even when run by ordinary users. Busybox then drops privileges for applets that don't need root access, before entering their main() function. Currently we don't install busybox binary with suid bit set, rendering this feature unusable. Note that we can't just "chmod u+s /bin/busybox" at runtime as a "cheaper" solution: it would waste approximately 200KiB of FLASH (the whole /bin/busybox binary gets copied into the overlay). Ref: PR#2502 Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br> [commit title/description facelift, use INSTALL_SUID variable] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* util-linux: Disable utils requiring libpamRosen Penev2019-10-271-1/+7
| | | | | | | When the build system finds libpam, it enables building of these tools, causing linker failures. Explicitly disable them as they are unused. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bzip2: add linker option LDFLAGSleo chung2019-10-191-0/+11
| | | | | | | | | | if gcc not linker whith this LDFLAGS, "file libbz2.so.1.0.8" will recognize as pie executable ELF file ( which should be shared object). this because the file command version before 5.36 not recognize correctly. Signed-off-by: leo chung <gewalalb@gmail.com>
* util-linux: add more commandLucian Cristian2019-10-181-1/+16
| | | | | | at least vtysh needs it for proper listing, busybox is not modular so add it here Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* lua: install luac symlink on hostAlin Nastac2019-10-181-0/+1
| | | | Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* lua: fix linking under glibcRosen Penev2019-10-151-2/+2
| | | | | | | | | | | | Compilation of liblua itself works, but when other packages link against it, the linker starts throwing undefined references to a bunch of math functions in libm. First discovered in a failed attempt to transition a package to uClibc++. Signed-off-by: Rosen Penev <rosenp@gmail.com> [fix commit title capitalization] Signed-off-by: David Bauer <mail@david-bauer.net>
* px5g: support EC keysEneas U de Queiroz2019-09-012-19/+71
| | | | | | | | | | | | | | | | | | This adds an 'eckey' command to generate an EC key, with an optional curve name argument, with P-256 as default. For the 'selfsigned' command, it adds an 'ec' algorithm argument to the '-newkey' option, and a '-pkeyopt ec_paramgen_curve:<curvename>' option, mirroring the way openssl specifies the curve name. Notice that curve names are not necessarily the same in mbedtls and openssl. In particular, secp256r1 works for mbedtls, but openssl uses prime256v1 instead. px5g uses mbedtls, but short NIST curve names P-256 and P-384 are specifically supported. Package size increased by about 900 bytes (arm). Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* lua: create lua symlink for host installationDavid Bauer2019-08-311-1/+3
| | | | | | | | | Since the binaries for both lua as well as lua5.3 contain the version number, invocations of the "lua" binary are failing, as it's not created anymore for the host package. Fixes: fe59b46 ("lua: include version number in installed files") Signed-off-by: David Bauer <mail@david-bauer.net>
* mtd-utils: update to 2.1.1DENG Qingfang2019-08-272-32/+4
| | | | | | | Removed upstream patch Compile and run tested on mvebu Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ct-bugcheck: report to https://openwrt.org by defaultYousong Zhou2019-08-181-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* lua: add lua.hpp to InstallDevJames Taylor2019-08-181-1/+2
| | | | | | | This is necessary to build PowerDNS authoritative and recursor against OpenWRT, and may avoid packages depending on lua/host unnecessarily. Signed-off-by: James Taylor <james@jtaylor.id.au>