aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add support for Dongwon T&I DW02-412HJihoon Han2021-10-311-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dongwon T&I DW02-412H is a 2.4/5GHz band 11ac (WiFi-5) router, based on Qualcomm Atheros QCA9557. Specifications -------------- - SoC: Qualcomm Atheros QCA9557-AT4A - RAM: DDR2 128MB - Flash: SPI NOR 2MB (Winbond W25Q16DVSSIG / ESMT F25L16PA(2S)) + NAND 64/128MB - WiFi: - 2.4GHz: QCA9557 WMAC - 5GHz: QCA9882-BR4A - Ethernet: 5x 10/100/1000Mbps - Switch: QCA8337N-AL3C - USB: 1x USB 2.0 - UART: - JP2: 3.3V, TX, RX, GND (3.3V is the square pad) / 115200 8N1 Installation -------------- 1. Connect a serial interface to UART header and interrupt the autostart of kernel. 2. Transfer the factory image via TFTP and write it to the NAND flash. 3. Update U-Boot environment variable. > tftpboot 0x81000000 <your image>-factory.img > nand erase 0x1000000 > nand write 0x81000000 0x1000000 ${filesize} > setenv bootpart 2 > saveenv Revert to stock firmware -------------- 1. Revert to stock U-Boot environment variable. > setenv bootpart 1 > saveenv MAC addresses as verified by OEM firmware -------------- WAN: *:XX (label) LAN: *:XX + 1 2.4G: *:XX + 3 5G: *:XX + 4 The label MAC address was found in art 0x0. Credits -------------- Credit goes to the @manatails who first developed how to port OpenWRT to this device and had a significant impact on this patch. And thanks to @adschm and @mans0n for guiding me to revise the code in many ways. Signed-off-by: Jihoon Han <rapid_renard@renard.ga> Reviewed-by: Sungbo Eo <mans0n@gorani.run> Tested-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for Xiaomi MiWifi 3CEduardo Santos2021-10-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Xiaomi MiWiFi 3C device. Xiaomi MiWifi 3C has almost the same system architecture as the Xiaomi Mi WiFi Nano, which is already officially supported by OpenWrt. The differences are: - Numbers of antennas (4 instead of 2). The antenna management is done via the µC. There is no configuration needed in the software code. - LAN port assignments are different. LAN1 and WAN are interchanged. OpenWrt Wiki: https://openwrt.org/toh/xiaomi/mir3c OpenWrt developers forum page: https://forum.openwrt.org/t/support-for-xiaomi-mi-3c Specifications: - CPU: MediaTek MT7628AN (575MHz) - Flash: 16MB - RAM: 64MB DDR2 - 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA - Antennas: 4x external single band antennas - WAN: 1x 10/100M - LAN: 2x 10/100M - LED: 1x amber/blue/red. Programmable - Button: Reset MAC addresses as verified by OEM firmware: use address source LAN *:92 factory 0x28 WAN *:92 factory 0x28 2g *:93 factory 0x4 OEM firmware uses VLAN's to create the network interface for WAN and LAN. Bootloader info: The stock bootloader uses a "Dual ROM Partition System". OS1 is a deep copy of OS2. The bootloader start OS2 by default. To force start OS1 it is needed to set "flag_try_sys2_failed=1". How to install: 1- Use OpenWRTInvasion to gain telnet, ssh and ftp access. https://github.com/acecilia/OpenWRTInvasion (IP: 192.168.31.1 - Username: root - Password: root) 2- Connect to router using telnet or ssh. 3- Backup all partitions. Use command "dd if=/dev/mtd0 of=/tmp/mtd0". Copy /tmp/mtd0 to computer using ftp. 4- Copy openwrt-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.bin to /tmp in router using ftp. 5- Enable UART access and change start image for OS1. ``` nvram set uart_en=1 nvram set flag_last_success=1 nvram set boot_wait=on nvram set flag_try_sys2_failed=1 nvram commit ``` 6- Installing Openwrt on OS1 and free OS2. ``` mtd erase OS1 mtd erase OS2 mtd -r write /tmp/openwrt-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.bin OS1 ``` Limitations: For the first install the image size needs to be less than 7733248 bits. Thanks for all community and especially for this device: minax007, earth08, S.Farid Signed-off-by: Eduardo Santos <edu.2000.kill@gmail.com> [wrap lines, remove whitespace errors, add mediatek,mtd-eeprom to &wmac, convert to nvmem] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dnsmasq: improve init scriptDaniel Golle2021-10-311-1/+4
| | | | | | | | * fix restart in LuCI (inherited umask was to restrictive) * make directory of hosts-file (!= /tmp) accessible in ujail Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* secilc: update to version 3.3Dominick Grift2021-10-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. Correct some typos Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/secilc/docs: Update the CIL documentation secilc: fix memory leaks in secilc2conf secilc: fix memory leaks in secilc libsepol/cil: Add support for using qualified names to secil2conf libsepol/cil: Add support for using qualified names to secil2tree secilc: Add support for using qualified names to secilc secilc/test: Add test for anonymous args secilc/docs: Relocate and reword macro call name resolution order secilc/docs: Document the order that inherited rules are resolved in secilc: Create the new program called secil2tree to write out CIL AST secilc/docs: Update the CIL documentation for various blocks secilc.c: Don't fail if input file is empty cil_conditional_statements.md: fix expr definition secilc/docs: Lists are now allowed in constraint expressions Signed-off-by: Daniel Golle <daniel@makrotopia.org> [re-apply now that libsepol is up-to-date as well] Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsepol: update to version 3.3Dominick Grift2021-10-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. libsepol/cil: Fix potential undefined shifts libsepol: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. libsepol/cil: Do not skip macros when resolving until later passes libsepol/cil: Limit the amount of reporting for bounds failures libsepol/cil: silence clang void-pointer-to-enum-cast warning libsepol: resolve GCC warning about null-dereference libsepol: use correct cast libsepol: ebitmap: mark nodes of const ebitmaps const Update VERSIONs to 3.3-rc2 for release. libsepol/cil: Handle operations in a class mapping when verifying libsepol/cil: Do not use original type and typeattribute datums libsepol: free memory after policy validation libsepol: avoid implicit conversions libsepol: fix typo libsepol/cil: Free duplicate datums in original calling function libsepol/cil: Fix detected RESOURCE_LEAK (CWE-772) Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/cil: Limit the number of active line marks libsepol/cil: Add function to get number of items in a stack libsepol: Fix detected RESOURCE_LEAKs libsepol/cil: Fix syntax checking in __cil_verify_syntax() libsepol/cil: Use size_t for len in __cil_verify_syntax() libsepol/cil: Remove redundant syntax checking libsepol/cil: Improve in-statement to allow use after inheritance libsepol/cil: Simplify cil_tree_children_destroy() libsepol/cil: Refactor the function __cil_build_ast_node_helper() libsepol/cil: Don't destroy optionals whose parent will be destroyed libsepol/cil: Properly check for parameter when inserting name libsepol/cil: Reset expandtypeattribute rules when resetting AST libsepol/cil: Properly check parse tree when printing error messages libsepol/cil: Allow some duplicate macro and block declarations libsepol/cil: When writing AST use line marks for src_info nodes libsepol/cil: Report correct high-level language line numbers libsepol/cil: Add line mark kind and line number to src info libsepol/cil: Create common string-to-unsigned-integer functions libsepol/cil: Push line mark state first when processing a line mark libsepol/cil: Check for valid line mark type immediately libsepol/cil: Check the token type after getting the next token libsepol/cil: Check syntax of src_info statement libsepol/cil: move the fuzz target and build script to the selinux repository libsepol: replace strerror by %m libsepol/cil: remove obsolete comment libsepol/cil: do not allow \0 in quoted strings libsepol/cil: Fix handling category sets in an expression libsepol: assure string NUL-termination of ibdev_name libsepol: avoid implicit conversions libsepol: ignore UBSAN false-positives libsepol: avoid unsigned integer overflow libsepol/cil: Improve checking for bad inheritance patterns libsepol: silence -Wextra-semi-stmt warning libsepol/cil: do not override previous results of __cil_verify_classperms libsepol/cil: Provide option to allow qualified names in declarations libsepol/cil: make array cil_sym_sizes const libsepol/cil: Only reset AST if optional has a declaration libsepol/cil: Add function to determine if a subtree has a declaration libsepol/cil: Improve degenerate inheritance check libsepol/cil: Reduce the initial symtab sizes for blocks libsepol/cil: Check for empty list when marking neverallow attributes libsepol/cil: Fix syntax checking of defaultrange rule libsepol/cil: Properly check for loops in sets libsepol/cil: Allow duplicate optional blocks in most cases libsepol: declare read-only arrays const libsepol: declare file local variable static libsepol: drop unnecessary casts libsepol: drop repeated semicolons libsepol/cil: avoid using maybe uninitialized variables libsepol/cil: drop unnecessary casts libsepol/cil: drop dead store libsepol/cil: drop extra semicolon libsepol/cil: silence cast warning libsepol: remove dead stores libsepol: do not allocate memory of size 0 libsepol: mark read-only parameters of type_set_ interfaces const libsepol: mark read-only parameters of ebitmap interfaces const libsepol: remove dead stores libsepol/cil: follow declaration-after-statement libsepol: follow declaration-after-statement libsepol: avoid unsigned integer overflow libsepol: remove unused functions libsepol: resolve missing prototypes libsepol: fix typos libsepol: Quote paths when generating policy.conf from binary policy libsepol/cil: Account for anonymous category sets in an expression libsepol/cil: Fix anonymous IP address call arguments libsepol: quote paths in CIL conversion libsepol/cil: Resolve anonymous levels only once libsepol/cil: Pointers to datums should be set to NULL when resetting libsepol/cil: Resolve anonymous class permission sets only once libsepol/cil: Limit the number of open parenthesis allowed libsepol/cil: Destroy the permission nodes when exiting with an error libsepol/cil: Handle disabled optional blocks in earlier passes libsepol/cil: Do not resolve arguments to declarations in the call libsepo/cil: Refactor macro call resolution libsepol/cil: Do not add NULL node when inserting key into symtab libsepol/cil: Make name resolution in macros work as documented libsepol/cil: Fix name resolution involving inherited blocks libsepol/cil: Check for self-referential loops in sets libsepol/cil: Return an error if a call argument fails to resolve libsepol/cil: Check datum in ordered list for expected flavor libsepol/cil: Detect degenerate inheritance and exit with an error libsepol/cil: Fix instances where an error returns SEPOL_OK libsepol/cil: Properly reset an anonymous classperm set libsepol: use checked arithmetic builtin to perform safe addition libsepol/cil: Add functions to make use of cil_write_ast() libsepol/cil: Create functions to write the CIL AST libsepol/cil: Use CIL_ERR for error messages in cil_compile() libsepol/cil: Make invalid statement error messages consistent libsepol/cil: Do not allow tunable declarations in in-statements libsepol/cil: Sync checks for invalid rules in macros libsepol/cil: Check for statements not allowed in optional blocks libsepol/cil: Sync checks for invalid rules in booleanifs libsepol/cil: Reorder checks for invalid rules when resolving AST libsepol/cil: Use AST to track blocks and optionals when resolving libsepol/cil: Create new first child helper function for building AST libsepol/cil: Cleanup build AST helper functions libsepol/cil: Reorder checks for invalid rules when building AST libsepol/cil: Move check for the shadowing of macro parameters libsepol/cil: Create function cil_add_decl_to_symtab() and refactor libsepol/cil: Refactor helper function for cil_gen_node() libsepol/cil: Allow permission expressions when using map classes libsepol/cil: Exit with an error if declaration name is a reserved word libsepol/cil: More strict verification of constraint leaf expressions libsepol/cil: Set class field to NULL when resetting struct cil_classperms libsepol/cil: cil_reset_classperms_set() should not reset classpermission libsepol/cil: Destroy classperm list when resetting map perms libsepol/cil: Destroy classperms list when resetting classpermission libsepol/cil: Fix out-of-bound read of file context pattern ending with "\" libsepol/cil: Check for duplicate blocks, optionals, and macros libsepol: Write "NO_IDENTIFIER" for empty CIL constraint expression libsepol: Enclose identifier lists in CIL constraint expressions libsepol/cil: Allow lists in constraint expressions libsepol: Enclose identifier lists in constraint expressions libsepol: Write "NO_IDENTIFIER" for empty constraint expression libsepol: make num_* unsigned int in module_to_cil libsepol/cil: do not leak avrulex_ioctl_table memory when an error occurs libsepol/cil: fix NULL pointer dereference in __cil_insert_name libsepol/cil: replace printf with proper cil_tree_log libsepol/cil: remove stray printf libsepol/cil: make cil_post_fc_fill_data static libsepol: Check kernel to CIL and Conf functions for supported versions libsepol: Remove unnecessary copying of declarations from link.c libsepol: Properly handle types associated to role attributes libsepol: Expand role attributes in constraint expressions Signed-off-by: Daniel Golle <daniel@makrotopia.org> [re-apply now that buildbot phase1 has caught up] Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* uboot-sunxi: add support for FriendlyARM NanoPi R1S H5Chukun Pan2021-10-302-0/+281
| | | | | | | Merged in https://github.com/u-boot/u-boot/commit/e7510d2, adjust back to the current 2020.04 version. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ath10k: backport fix for module load regression with iram-recoveryZhijun You2021-10-304-5/+126
| | | | | | | | Backport upstream fix for module load regression caused by IRAM recovery. Without this patch devices using mainline ath10k driver could lost wireless function because ath10k module failed to load. Signed-off-by: Zhijun You <hujy652@gmail.com>
* 6in4: remove 6in4 tunnel delete workaround (FS#3690)Hans Dedecker2021-10-302-3/+1
| | | | | | | | Remove 6in4 tunnel delete workaround as the real issue is now solved in netifd (https://git.openwrt.org/?p=project/netifd.git;a=commit;h=8f82742ca4f47f459284f3a07323d04da72ea5f6) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* 6rd : remove 6rd tunnel delete workaroundHans Dedecker2021-10-302-3/+1
| | | | | | | | Remove 6rd tunnel delete workaround in as the real issue is now solved in netifd (https://git.openwrt.org/?p=project/netifd.git;a=commit;h=8f82742ca4f47f459284f3a07323d04da72ea5f6) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: fix deletion of ip tunnels (FS#4058)Hans Dedecker2021-10-301-3/+3
| | | | | | 8f82742 system-linux: fix deletion of ip tunnels (FS#4058) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq40xx: detangle ath10k-board-qca4019 from ath10k-firmware-qca4019*Christian Lamparter2021-10-302-4/+1
| | | | | | | | | | | | | | | | | | | | | | Back in the day, the board-2.bin came with ath10k-firmware-qca4019. This changed with commit c3b2efaf24b5 ("linux-firmware: ath10k: add board firmware packages") which placed the board-2.bin into a separate package: ath10k-board-qca4019. This was great, because it addressed one of the caveat of the original ipq-wifi package: commit fa03d441e96e ("firmware: add custom IPQ wifi board definitions") | 2. updating ath10k-firmware-qca4019 will also replace | the board-2.bin. For this cases the user needs to | manually reinstall the wifi-board package once the | ath10k-firmware-qca4019 is updated. This could be extended further so that ipq-wifi packages no longer use "install-override" and the various QCA4019 variants list the ath10k-board-qca4019 as a CONFLICT package. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limitChristian Lamparter2021-10-303-22/+30
| | | | | | | | | | | | | | | | | | OpenWrt maintains two special out-of-tree DT properties: "qca,disable-5ghz" and "qca,disable-2ghz". These are implemented in a mac80211 ath9k patch "550-ath9k-disable-bands-via-dt.patch". With the things being what they are, now might be a good point to switch the devices to the generic and upstream "ieee80211-freq-limit" property. This property is much broader and works differently. Instead of disabling the drivers logic which would add the affected band and channels. It now disables all channels which are not within the specified frequency range. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # HH5A Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* dropbear: add config options for agent-forwarding supportSven Roederer2021-10-302-1/+13
| | | | | | | | | | * SSH agent forwarding might cause security issues, locally and on the jump machine (https://defn.io/2019/04/12/ssh-forwarding/). So allow to completely disabling it. * separate options for client and server * keep it enabled by default Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
* Revert "secilc: update to version 3.3"Daniel Golle2021-10-291-3/+3
| | | | | | | | This reverts commit 2da891e7357c83c54a30075fcddbb63eeca0af99. secilc 3.3 requires libsepol to be version 3.3 as well and doesn't build otherwise. Revert for now. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "libsepol: update to version 3.3"Daniel Golle2021-10-291-3/+3
| | | | | | | | | This reverts commit de8a800ca9bda1171bfe17ee7653532465a8b596. Host build uses host includes instead of staging/hostpkg. This breaks the build in case of selinux host libs being older than version 3.3. Revert for now until better fix is found. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to version 1.0Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | wifi: writes to terminal hotplugcall and sqm read class sysfile symlinks unbound and sqm related loose ends support/example: policycoreutils host-compile is required TODO: this was wrong and it is actually needed linguist detectable does not work this way linguist-detectable updates README adds workflows adds a note about persistent /var option project moved to https://github.com/DefenSec/selinux-policy Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. Correct some typos Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/secilc/docs: Update the CIL documentation secilc: fix memory leaks in secilc2conf secilc: fix memory leaks in secilc libsepol/cil: Add support for using qualified names to secil2conf libsepol/cil: Add support for using qualified names to secil2tree secilc: Add support for using qualified names to secilc secilc/test: Add test for anonymous args secilc/docs: Relocate and reword macro call name resolution order secilc/docs: Document the order that inherited rules are resolved in secilc: Create the new program called secil2tree to write out CIL AST secilc/docs: Update the CIL documentation for various blocks secilc.c: Don't fail if input file is empty cil_conditional_statements.md: fix expr definition secilc/docs: Lists are now allowed in constraint expressions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* policycoreutils: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. libselinux/semodule: Improve extracting message Correct some typos Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release policycoreutils: free memory of allocated context in newrole policycoreutils: free memory of allocated context in run_init policycoreutils: free memory on lstat failure in sestatus policycoreutils: silence -Wextra-semi-stmt warning fixfiles: do not exclude /dev and /run in -C mode policycoreutils/setfiles: do not create useless setfiles.8.man file Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* checkpolicy: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. checkpolicy: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. checkpolicy: delay down-cast to avoid align warning checkpolicy: drop incorrect cast checkpolicy: update documentation checkpolicy: print reason of fopen failure checkpolicy: policy_define: cleanup declarations Update VERSIONs to 3.3-rc2 for release. checkpolicy: free extended permission memory checkpolicy: print warning on source line overflow checkpolicy: error out on parsing too big integers checkpolicy: avoid implicit conversion checkpolicy: resolve dismod memory leaks checkpolicy: add missing function declarations checkpolicy: mark file local functions in policy_define static checkpolicy: mark read-only parameters in module compiler const checkpolicy: misc checkpolicy tweaks checkpolicy: misc checkmodule tweaks checkpolicy: enclose macro argument in parentheses Update VERSIONs and Python bindings version to 3.3-rc1 for release checkpolicy: mark read-only parameters in policy define const checkpolicy/test: mark file local functions static checkpolicy: parse_util drop unused declaration checkpolicy: drop redundant cast to the same type checkpolicy: avoid potential use of uninitialized variable checkpolicy: check before potential NULL dereference checkpolicy: remove dead assignments checkpolicy: follow declaration-after-statement checkpolicy: use correct format specifier for unsigned checkpolicy: drop dead condition checkpolicy: simplify assignment checkpolicy: drop -pipe compile option checkpolicy: pass CFLAGS at link stage checkpolicy: silence -Wextra-semi-stmt warning checkpolicy: Do not automatically upgrade when using "-b" flag libsepol/checkpolicy: Set user roles using role value instead of dominance Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsemanage: update to version 3.3Dominick Grift2021-10-281-4/+4
| | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release libsemanage: Fix USE_AFTER_FREE (CWE-672) in semanage_direct_write_langext() libsemanage: silence -Wextra-semi-stmt warning libsemanage: fix use-after-free in parse_module_store() Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libselinux: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. libselinux: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. Update VERSIONs to 3.3-rc2 for release. libselinux/utils: drop requirement to combine compiling and linking Update VERSIONs and Python bindings version to 3.3-rc1 for release Improve error message for label file validation libselinux: replace strerror by %m libselinux: silence -Wextra-semi-stmt warning libselinux/utils/getseuser.c: fix build with gcc 4.8 selinux.8: document how mount flag nosuid affects SELinux libselinux: fix typo libselinux: improve getcon(3) man page libselinux: selinux_status_open: return 1 in fallback mode libselinux: do not use status page fallback mode internally libselinux: make selinux_status_open(3) reentrant libselinux: avc_destroy(3) closes status page libselinux: label_file.c: fix indent libselinux: regex: unify parameter names libselinux: sidtab_sid_stats(): unify parameter name libselinux: drop redundant casts to the same type libselinux: label_db::db_init(): open file with CLOEXEC mode libselinux: matchpathcon: free memory on realloc failure libselinux: label_file::init(): do not pass NULL to strdup libselinux: init_selinux_config(): free resources on error libselinux: matchmediacon(): close file on error libselinux: store_stem(): do not free possible non-heap object libselinux: getdefaultcon: free memory on multiple same arguments libselinux: setexecfilecon(): drop dead assignment libselinux: label_media::init(): drop dead assignment libselinux: label_x::init(): drop dead assignment libselinux: context_new(): drop dead assignment libselinux: exclude_non_seclabel_mounts(): drop unused variable libselinux: getconlist: free memory on multiple level arguments libselinux: selabel_get_digests_all_partial_matches: free memory after FTS_D block libselinux: selinux_restorecon: mark local variable static libselinux: avcstat: use standard length modifier for unsigned long long libselinux: sefcontext_compile: mark local variable static libselinux: Sha1Finalise(): do not discard const qualifier libselinux: label_common(): do not discard const qualifier libselinux: selinux_file_context_cmp(): do not discard const qualifier libselinux: sidtab_hash(): do not discard const qualifier libselinux: silence -Wstringop-overflow warning from gcc 10.3.1 libselinux: selinux_check_passwd_access_internal(): respect deny_unknown libselinux: do not duplicate make target when going into subdirectory Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsepol: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. libsepol/cil: Fix potential undefined shifts libsepol: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. libsepol/cil: Do not skip macros when resolving until later passes libsepol/cil: Limit the amount of reporting for bounds failures libsepol/cil: silence clang void-pointer-to-enum-cast warning libsepol: resolve GCC warning about null-dereference libsepol: use correct cast libsepol: ebitmap: mark nodes of const ebitmaps const Update VERSIONs to 3.3-rc2 for release. libsepol/cil: Handle operations in a class mapping when verifying libsepol/cil: Do not use original type and typeattribute datums libsepol: free memory after policy validation libsepol: avoid implicit conversions libsepol: fix typo libsepol/cil: Free duplicate datums in original calling function libsepol/cil: Fix detected RESOURCE_LEAK (CWE-772) Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/cil: Limit the number of active line marks libsepol/cil: Add function to get number of items in a stack libsepol: Fix detected RESOURCE_LEAKs libsepol/cil: Fix syntax checking in __cil_verify_syntax() libsepol/cil: Use size_t for len in __cil_verify_syntax() libsepol/cil: Remove redundant syntax checking libsepol/cil: Improve in-statement to allow use after inheritance libsepol/cil: Simplify cil_tree_children_destroy() libsepol/cil: Refactor the function __cil_build_ast_node_helper() libsepol/cil: Don't destroy optionals whose parent will be destroyed libsepol/cil: Properly check for parameter when inserting name libsepol/cil: Reset expandtypeattribute rules when resetting AST libsepol/cil: Properly check parse tree when printing error messages libsepol/cil: Allow some duplicate macro and block declarations libsepol/cil: When writing AST use line marks for src_info nodes libsepol/cil: Report correct high-level language line numbers libsepol/cil: Add line mark kind and line number to src info libsepol/cil: Create common string-to-unsigned-integer functions libsepol/cil: Push line mark state first when processing a line mark libsepol/cil: Check for valid line mark type immediately libsepol/cil: Check the token type after getting the next token libsepol/cil: Check syntax of src_info statement libsepol/cil: move the fuzz target and build script to the selinux repository libsepol: replace strerror by %m libsepol/cil: remove obsolete comment libsepol/cil: do not allow \0 in quoted strings libsepol/cil: Fix handling category sets in an expression libsepol: assure string NUL-termination of ibdev_name libsepol: avoid implicit conversions libsepol: ignore UBSAN false-positives libsepol: avoid unsigned integer overflow libsepol/cil: Improve checking for bad inheritance patterns libsepol: silence -Wextra-semi-stmt warning libsepol/cil: do not override previous results of __cil_verify_classperms libsepol/cil: Provide option to allow qualified names in declarations libsepol/cil: make array cil_sym_sizes const libsepol/cil: Only reset AST if optional has a declaration libsepol/cil: Add function to determine if a subtree has a declaration libsepol/cil: Improve degenerate inheritance check libsepol/cil: Reduce the initial symtab sizes for blocks libsepol/cil: Check for empty list when marking neverallow attributes libsepol/cil: Fix syntax checking of defaultrange rule libsepol/cil: Properly check for loops in sets libsepol/cil: Allow duplicate optional blocks in most cases libsepol: declare read-only arrays const libsepol: declare file local variable static libsepol: drop unnecessary casts libsepol: drop repeated semicolons libsepol/cil: avoid using maybe uninitialized variables libsepol/cil: drop unnecessary casts libsepol/cil: drop dead store libsepol/cil: drop extra semicolon libsepol/cil: silence cast warning libsepol: remove dead stores libsepol: do not allocate memory of size 0 libsepol: mark read-only parameters of type_set_ interfaces const libsepol: mark read-only parameters of ebitmap interfaces const libsepol: remove dead stores libsepol/cil: follow declaration-after-statement libsepol: follow declaration-after-statement libsepol: avoid unsigned integer overflow libsepol: remove unused functions libsepol: resolve missing prototypes libsepol: fix typos libsepol: Quote paths when generating policy.conf from binary policy libsepol/cil: Account for anonymous category sets in an expression libsepol/cil: Fix anonymous IP address call arguments libsepol: quote paths in CIL conversion libsepol/cil: Resolve anonymous levels only once libsepol/cil: Pointers to datums should be set to NULL when resetting libsepol/cil: Resolve anonymous class permission sets only once libsepol/cil: Limit the number of open parenthesis allowed libsepol/cil: Destroy the permission nodes when exiting with an error libsepol/cil: Handle disabled optional blocks in earlier passes libsepol/cil: Do not resolve arguments to declarations in the call libsepo/cil: Refactor macro call resolution libsepol/cil: Do not add NULL node when inserting key into symtab libsepol/cil: Make name resolution in macros work as documented libsepol/cil: Fix name resolution involving inherited blocks libsepol/cil: Check for self-referential loops in sets libsepol/cil: Return an error if a call argument fails to resolve libsepol/cil: Check datum in ordered list for expected flavor libsepol/cil: Detect degenerate inheritance and exit with an error libsepol/cil: Fix instances where an error returns SEPOL_OK libsepol/cil: Properly reset an anonymous classperm set libsepol: use checked arithmetic builtin to perform safe addition libsepol/cil: Add functions to make use of cil_write_ast() libsepol/cil: Create functions to write the CIL AST libsepol/cil: Use CIL_ERR for error messages in cil_compile() libsepol/cil: Make invalid statement error messages consistent libsepol/cil: Do not allow tunable declarations in in-statements libsepol/cil: Sync checks for invalid rules in macros libsepol/cil: Check for statements not allowed in optional blocks libsepol/cil: Sync checks for invalid rules in booleanifs libsepol/cil: Reorder checks for invalid rules when resolving AST libsepol/cil: Use AST to track blocks and optionals when resolving libsepol/cil: Create new first child helper function for building AST libsepol/cil: Cleanup build AST helper functions libsepol/cil: Reorder checks for invalid rules when building AST libsepol/cil: Move check for the shadowing of macro parameters libsepol/cil: Create function cil_add_decl_to_symtab() and refactor libsepol/cil: Refactor helper function for cil_gen_node() libsepol/cil: Allow permission expressions when using map classes libsepol/cil: Exit with an error if declaration name is a reserved word libsepol/cil: More strict verification of constraint leaf expressions libsepol/cil: Set class field to NULL when resetting struct cil_classperms libsepol/cil: cil_reset_classperms_set() should not reset classpermission libsepol/cil: Destroy classperm list when resetting map perms libsepol/cil: Destroy classperms list when resetting classpermission libsepol/cil: Fix out-of-bound read of file context pattern ending with "\" libsepol/cil: Check for duplicate blocks, optionals, and macros libsepol: Write "NO_IDENTIFIER" for empty CIL constraint expression libsepol: Enclose identifier lists in CIL constraint expressions libsepol/cil: Allow lists in constraint expressions libsepol: Enclose identifier lists in constraint expressions libsepol: Write "NO_IDENTIFIER" for empty constraint expression libsepol: make num_* unsigned int in module_to_cil libsepol/cil: do not leak avrulex_ioctl_table memory when an error occurs libsepol/cil: fix NULL pointer dereference in __cil_insert_name libsepol/cil: replace printf with proper cil_tree_log libsepol/cil: remove stray printf libsepol/cil: make cil_post_fc_fill_data static libsepol: Check kernel to CIL and Conf functions for supported versions libsepol: Remove unnecessary copying of declarations from link.c libsepol: Properly handle types associated to role attributes libsepol: Expand role attributes in constraint expressions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* base-files, metadata: support additional group membershipDaniel Golle2021-10-281-3/+20
| | | | | | | | | | | | Some packages may require additional group membership for the system user added by that package. Allow defining additional groups as third member of the ':'-separated tuple, allowing to specify multiple ','-separated groups with optional GID. Example: USERID:=foouser=1000:foogroup=1000:addg1=1001,addg2=1002,addg3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* umdns: add missing syscall to seccomp filterMichael Peleshenko2021-10-271-0/+1
| | | | | | | The 'madvise', syscall is missing. Found with 'utrace /usr/sbin/umdns' on an R7800 and RT3200. Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
* ucode: update to latest Git HEADJo-Philipp Wich2021-10-251-3/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 0f022aa lib: increase refcount when returning cached module instance c9e68bb lib: introduce resolver library 9041e24 lib: fix uninitialized memory access on handling %J string formats 4ee06d8 syntax: introduce optional chaining operators ce4a7d9 vm: reset callframes before invoking unhandled exception handler 218e822 vm: clear exception information before calling managed code functions 5b908bd ubus: properly handle signed 64bit values too e43b751 ubus: fix handling signed 16bit and 32bit integers 137428f nl80211: fix issues spotted by static code analyzer b9d4f61 nl80211: treat signal attr values as signed integers 9a7c355 nl80211: expose sta_info attributes bb358d9 lib: introduce Linux 802.11 netlink binding 914f54c types: fix invalid memory access on setting non-contiguous array indexes 631f00d main: fix leaking module name when processing -m flag e55188b compiler: properly handle jumps to offset 0 98c4147 tests: support specifying cmdline args in testcase files 64e4f68 types: fix formatting escape sequences for 8 bit chars dd86e1d rtnl: automatically derive message family from certain address attrs 74fdb97 rtnl: expose IPv4 and IPv6 devconfig information 7fa1008 rtnl: allow reply nla payloads to be smaller than headsize cbae3cb lib: introduce Linux route netlink binding e6dd389 ci: adjust build prereqs for GitHub as well 07ae165 ci: add libnl-tiny to prereqs Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-242-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAM9X60-EK board. Hardware: - SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices Flashing: - follow the procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-242-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-242-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* wolfssl: enable ECC Curve 25519 by defaultStan Grishin2021-10-241-1/+1
| | | | | | | * fixes https://github.com/openwrt/packages/issues/16652 see https://github.com/openwrt/packages/issues/16674#issuecomment-934983898 Signed-off-by: Stan Grishin <stangri@melmac.net>
* uclibc++: removeRosen Penev2021-10-247-398/+0
| | | | | | | | | | | | | | | No package here depends on it. Furthermore, uClibc++ is a fairly buggy C++ library and seems to be relatively inactive upstream. It also lacks proper support for modern C++11 features. The main benefit of it is size: 66.6 KB vs 287.3 KB on mips24kc. Static linking and LTO can help bring the size down of packages that need it. Added warning message to uclibc++.mk Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* u-boot.mk: always link host libraries staticAndre Heider2021-10-243-42/+0
| | | | | | | | Host libraries are only build static, so let's pass --static to pkg-config globally and remove the then unnecessary patches doing exactly that individually. Signed-off-by: Andre Heider <a.heider@gmail.com>
* u-boot.mk: fix pkg-config usageAndre Heider2021-10-244-8/+0
| | | | | | | | Using Host/Exports doesn't work as intended, explicitly add the required vars so that u-boot finds the required libraries when building its tools. Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: Add devm_platform_get_and_ioremap_resource()Hauke Mehrtens2021-10-241-0/+79
| | | | | | | | This function is missing in kernel 5.4, but it is sued by ath10k. This fixes the build of ath10k on some targets. Fixes: cfe0eb7485d8 ("mac80211: Update to version 5.14.13-1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15-rc6-1Hauke Mehrtens2021-10-2416-1773/+26
| | | | | | | | The removed patches were applied upstream. The Cisco Aironet 802.11b driver was removed from backports, remove it also from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.14.13-1Hauke Mehrtens2021-10-2422-1916/+154
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.13.19-1Hauke Mehrtens2021-10-2430-1100/+133
| | | | | | | | | The removed patches were applied upstream. of_get_mac_address() was backported in our OpenWrt kernel, remove the change from backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.12.19-1Hauke Mehrtens2021-10-2386-6099/+249
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.11.22-1Hauke Mehrtens2021-10-2388-1995/+366
| | | | | | | | The removed patches were applied upstream. This backports version 5.11.22 and later does not support kernel versions < 4.4, this allows us to remove some patches too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: update to v5.14Hans Dedecker2021-10-231-3/+3
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ethtool: update to v5.14"Hans Dedecker2021-10-231-3/+3
| | | | | | This reverts commit 7630001427fa266fa61da0b2533e2c1054eababe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: update to v5.14Hans Dedecker2021-10-231-3/+3
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* umdns: add missing syscall to seccomp filterMichael Peleshenko2021-10-231-0/+1
| | | | | | | The 'clock_gettime64', syscall is missing. Found with 'utrace /usr/sbin/umdns' on an R7800. Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
* wireless-regdb: update to version 2021.08.28Christian Lamparter2021-10-231-2/+2
| | | | | | | | | | | | e983a25 Update regulatory rules for Ecuador (EC) a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz 86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US 6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US 9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately 42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: chmod 1777 /var/lockDeomid Ryabkov2021-10-231-2/+3
| | | | | | | | | | | | | Per FHS 3.0, /var/lock is the location for lock files [1]. However its current permissions (755) are too restrictive for use by unprivileged processes. Debian and Ubuntu set them to 1777, and now so do we. [1] <https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.html#varlockLockFiles> Signed-off-by: Deomid Ryabkov <rojer@rojer.me> [fixed typo in commit message, had to remove "rojer" due to git hooks] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | f6bde7ba82ee mt76: connac: fix unresolved symbols when CONFIG_PM is unset Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | | | | | | | | | | | | 9d288d7c0c73 mt76: mt7615: apply cached RF data for DBDC 4d2e81d9ecab mt76: mt7915: remove mt7915_mcu_add_he() 2c8c3bcd766c mt76: mt7915: rework .set_bitrate_mask() to support more options 577d45f6e4a0 mt76: mt7915: rework debugfs fixed-rate knob b68af355f707 mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_caps b52adf981561 mt76: mt7915: add WA firmware log support ed3d8569c400 mt76: mt7915: add debugfs knobs for MCU utilization 0f49a22314a5 mt76: mt7921: disable 4addr capability 754d4a37ab71 mt76: mt7921: fix mt7921s Kconfig f81f42fe875f mt76: Print error message when reading EEPROM from mtd failed fd25a550965d mt76: Make use of the helper macro kthread_run() 1d01257662a6 wireless: mediatek: mt7921: fix Wformat build warning Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uci: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | cmake: Allow override of install directories Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | jail: Fix build with glibc Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: ubus: fix uninitialized pointerDavid Bauer2021-10-211-1/+1
| | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix up patches after the last commitFelix Fietkau2021-10-214-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 15:23:18 +0000