aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: fix dynack in IBSS modeKoen Vandeputte2018-11-065-0/+309
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, dynack was only tested upstream using AP/STA mode. Testing it on IBSS, showed that late-ack detection was broken. This is caused due to dynack using Association Request/Response frames for late-ack detection, which IBSS does not use. Also allowing Authentication frames here solves this. A second issue also got fixed, which was also seen AP/STA mode: When a station was added, the estimated value would be exponentially averaged using 0 as a starting point. This means that on larger distances, the ack timeout was still not high enough before synchronizing would run out of late-ack's for estimation. Fix this by using the initial estimated value as a baseline and only start averaging in the following estimation rounds. Test setup: - 2x identical devices: RB912UAG-5HPnD + 19dB sector - IBSS - 2x2 802.11an (ar9340), HT20, long GI - RSSI's -70 / -71 - Real distance: 23910 meter Results (60s iperf runs): Fixed coverage class 54 (up to 24300m): * 21.5 Mbits/sec Dynack: * 28.9 Mbits/sec Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* iperf: allow non-ipv6 buildsAlexander Couzens2018-11-032-1/+27
| | | | | | | | Add configure argument --disable-ipv6 when ipv6 is deselected. Add fix-non-ipv6-builds.patch as long there is no new upstream release. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* curl: noop commit to refer CVEs fixed in 7.62.0Hans Dedecker2018-11-021-1/+0
| | | | | | | | | | | | | When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed CVEs in the commit message; this commit fixes this. The following CVEs were fixed in 7.62.0 : CVE-2018-16839 CVE-2018-16840 CVE-2018-16842 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq-wifi: drop custom board-2.binsChristian Lamparter2018-11-013-3/+1
| | | | | | | | | | | | | The BDFs for all boards were upstreamed to the ath10k-firmware repository and linux-firmware.git. We switched to the upstream board-2.bin, hence the files can be removed here. Keep the ipq-wifi package in case new boards are added. It might take some time till board-2.bins send upstream are merged. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: update board-2.bin for community firmwaresChristian Lamparter2018-11-011-3/+3
| | | | | | | | This patch updates the board-2.bin for the default IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct and -ct-htt firmwares. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Remove dependencies on old kernelsRosen Penev2018-11-016-8/+8
| | | | | | Kernels 4.1 and 4.4 are not part of the tree anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libconfig: Fix tarball filename (and URL)Daniel Engberg2018-11-011-3/+3
| | | | | | v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* uboot-mxs: bump to v2018.09Michael Heimpold2018-11-014-130/+72
| | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices and remove upstreamed patch for LibreSSL support. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mwlwifi: update to version 10.3.8.0-20181029Kabuli Chana2018-11-011-3/+3
| | | | | | compile / test target mvebu / mamba Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel: add kmod-usb-serial-mos7840Thomas Fuzeau2018-11-011-0/+15
| | | | | | Enable build of kernel module for mos7840 usb-serial devices. Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
* curl: bump to 7.62.0Hans Dedecker2018-10-312-3/+3
| | | | | | Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build depMatthias Schiffer2018-10-302-2/+6
| | | | | | | | | | | | | | | | | | | | Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some situations it may happen that libunbound and openssl are only pulled in as build dependencies, but are not enabled in .config. In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are ignored (as the whole symbol depends on PACKAGE_libopenssl), and config symbol dependencies of libunbound aren't effective either (as libunbound is not actually enabled). This commit works around the issue by introducing a hidden negated symbol OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is disabled, and ensures that OpenSSL is built with deprecated APIs in this case. A user can still manage to break the build by explicitly enabling libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between build dependencies and config symbols will require further discussion. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: tighten config file permissionsKevin Darbyshire-Bryant2018-10-301-6/+6
| | | | | | | | | | | | | | | | | | Install following as config files (600) perms instead of as data (644) /usr/share/dnsmasq/dhcpbogushostname.conf /usr/share/dnsmasq/trust-anchors.conf /usr/share/dnsmasq/rfc6761.conf /etc/hotplug.d/ntp/25-dnsmasqsec /etc/config/dhcp /etc/dnsmasq.conf dnsmasq reads relevant config files before dropping root privilege and running as dnsmasq:dnsmasq ntpd runs as root so the hotplug script is still accessible Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2018-10-271-3/+3
| | | | | | fdc63f1 mt76: fix regression in tx status handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: Fix dependencies for PCI supportDaniel Engberg2018-10-261-5/+5
| | | | | | | | | | USB support doesn't necessarily mean that there's PCI support available so move that to the drivers which requires PCI support. This applies to the sunxi platform for instance. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
* mt76: update to the latest versionFelix Fietkau2018-10-251-3/+3
| | | | | | | | | | | 0b8b15f mt7603: use common mmio mcu struct d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx 9d59d2a mt76: add support for reporting tx status with skb ed17ba2 mt7603: use common tx status handling code 14b6c59 mt76x0: use band parameter for LC calibration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* grub2: fix regression caused by binutils-2.31.1Philip Prindeville2018-10-252-1/+76
| | | | | | | | | | | | | grub-efi no longer works: grub-mkimage: error: relocation 0x4 is not implemented yet. See: http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=842c390469e2c2e10b5aa36700324cd3bde25875 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
* mwlwifi: driver version to 10.3.8.0-20181022Jonathan Lancett2018-10-241-3/+3
| | | | | | | | | | | | Upgrade 88W8997 firmware to 8.4.0.52. Removed unnecessary firmware settings. Added vendor events. Fixed crash problem when module is removed. Modified the code to protect tx queues. Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2018-10-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | d033272 mt76: mt76x0: handle chip specific initval differences 1a2b2dc mt76: usb: fix static tracepoints 11151f4 mt76x0: antenna select corrections dade109 mt76x0: init: simplify mt76x0_init_mac_registers 3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro 97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor 5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module a4a08c3 mt76: move mac beacon routines in mt76x02-lib module 6b69650 mt76: move tx beacon routines in mt76x02-lib module 8486047 mt76x0: pci: add pre_tbtt_tasklet support acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module 2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module e684281 mt76: introduce mt76x02_init_beacon_config routine c181d97 mt76x0: pci: enable AP support 3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module 41d7ef7 mt76x0: update init vals for MT_TX_PROT registers fe5a149 mt76: move tx protection routines in mt76x02-lib module 5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module d21a835 mt76: move dfs support in mt76x02-lib module ba9d424 mt76x0: pci: add DFS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fstools: update to git HEADHans Dedecker2018-10-211-3/+3
| | | | | | 29e53af fstools: add ntfs support Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-coreHauke Mehrtens2018-10-211-1/+1
| | | | | | This fixes a build problem on x86. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: Add iwl 9000 and 9260 firmwareHauke Mehrtens2018-10-201-0/+14
| | | | | | | Add the most recent supported firmware file for the Intel 9000 and 9260 wireless chips. The API version 41 is not yet supported by the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: update firmware files for 7265D, 8000C and 8265Hauke Mehrtens2018-10-201-3/+3
| | | | | | Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: driver version to 10.3.8.0-20181008Yufei Miao2018-10-201-3/+3
| | | | Signed-off-by: Yufei Miao <myf@myf.cloud>
* kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.Roman Bazalevskiy2018-10-201-0/+13
| | | | Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
* kernel/modules: add kmod-fou6 packageDeng Qingfang2018-10-201-0/+21
| | | | | | IPv6 support for Foo-over-UDP tunnel Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* linux-firmware: Update linux-firmware to 2018-10-18Robert Marko2018-10-201-4/+4
| | | | | | | | | | | | | | | Kalles ath10k PR was finally merged so update linux-firmware to include those changes. This is needed since disabling ath10k-firmware a lot of custom BDF-s in board-2.bin-s are not available in previously outdated linux-firmware board-2.bin-s. This also includes support for boards currently using ipq-wifi and other WIP ones. Runtime tested on 8devices Jalapeno. Signed-off-by: Robert Marko <robimarko@gmail.com>
* gemini: Break out USB to packagesLinus Walleij2018-10-201-0/+11
| | | | | | | | | | | | This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* dnsmasq: bump to v2.80Kevin Darbyshire-Bryant2018-10-191-4/+4
| | | | | | | | | | dnsmasq v2.80 release Change from rc1: 91421cb Fix compiler warning. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: install ip-tiny and ip-full in /usr/libexecHans Dedecker2018-10-181-7/+7
| | | | | | | Install the ip-tiny and ip-full variants in /usr/libexec as the suffixed ip variants are not meant to be called directly Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-10-181-3/+3
| | | | | | | | | | | b51337a mt76: clean up unused leftover EXPORT_SYMBOLs 383b228 mt76x0: reduce duplication in setting rf bandwidth parameters a1a4528 mt76: mt76x0: handle chip specific initval differences f473340 mt76: usb: fix static tracepoints 3a975b4 mt76x0: antenna select corrections 37c1150 mt76x0: init: simplify mt76x0_init_mac_registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20181018Jason A. Donenfeld2018-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | ba2ab5d version: bump snapshot 5f59c76 tools: wg-quick: wait for interface to disappear on freebsd ac7e7a3 tools: don't fail if a netlink interface dump is inconsistent 8432585 main: get rid of unloaded debug message 139e57c tools: compile on gnu99 d65817c tools: use libc's endianness macro if no compiler macro f985de2 global: give if statements brackets and other cleanups b3a5d8a main: change module description 296d505 device: use textual error labels always 8bde328 allowedips: swap endianness early on a650d49 timers: avoid using control statements in macro db4dd93 allowedips: remove control statement from macro by rewriting 780a597 global: more nits 06b1236 global: rename struct wireguard_ to struct wg_ 205dd46 netlink: do not stuff index into nla type 2c6b57b qemu: kill after 20 minutes 6f2953d compat: look in Kbuild and Makefile since they differ based on arch a93d7e4 create-patch: blacklist instead of whitelist 8d53657 global: prefix functions used in callbacks with wg_ 123f85c compat: don't output for grep errors Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* netifd: update to latest git HEADHans Dedecker2018-10-171-3/+3
| | | | | | | 841b5d1 system-linux: enable by default ignore encaplimit for grev6 tunnels 125cbee system-linux: fix a typo in gre tunnel data parsing logic Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gre: make encaplimit support configurableHans Dedecker2018-10-172-2/+4
| | | | | | | | | | | Make inclusion of the destination option header containing the tunnel encapsulation limit configurable for IPv6 GRE packets. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the IPv6 GRE packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* hostapd: add basic variantKevin Darbyshire-Bryant2018-10-164-0/+1016
| | | | | | | | Add a basic variant which provides WPA-PSK only, 802.11r and 802.11w and is intended to support 11r & 11w (subject to driver support) out of the box. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ppp: don't start ppp with IPv6 support if ipv6 is not supportedRosy Song2018-10-162-5/+8
| | | | | Signed-off-by: Rosy Song <rosysong@rosinson.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest version, add mt76x0 firmware, enable mt76x0eFelix Fietkau2018-10-161-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 96fa353 mt76: do not store aggregation sequence number for null-data frames c50dca8 mt76x0: print BBP version only for debug ddc9e05 mt76x0: correct RF access via RF_CSR register. 02d2385 mt76: allow to identify bus c438e67 mt76x0: correct RF reg pairs write for PCIe c83abb8 mt76x0: use bus helper to identify rf access method 9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr} 1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c 214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c 29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c 08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c 48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c 06276cc mt76x0: pci: report firmware version using ethtool 72546ed mt76x0: pci: add missing mac80211 callbacks 4de98cd mt76: disable ldpc coding for mt76x0 devices f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device 4f3685e mt76: reserve enough room for USB tx skbs 5e6907f mt76x0: remove dma.h acfc5a9 mt76x0: pci: fix set external PA I/O current 2b79bb7 mt76: mt76x0e: another fix for the external PA current setting 8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params 1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module 3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate 7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine a514b75 mt76x0: phy: update set_channel for mt76x0e devices 62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine a48481d mt76x0: phy: add phy/vco temperature compensation cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c 2715e7c mt76: introduce mt76x02_init_agc_gain routine 87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one 98f8ef7 mt76x0: phy: do not run calibration during channel switch cf859ad mt76x2: align mt76x2 and mt76x2u firmware 1f3f767 mt76x2u: align channel gain logic to mt76x2 one d1c1454 treewide: Replace more open-coded allocation size multiplications bcbecd2 mt76x0: phy: use proper name convention b6694e6 mt76x0: phy: simplify rf configuration routines da129c9 mt76x0: phy: improve code readability in initvals_phy.h eab7ab1 mt76x0: pci: add get_survey support 9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module 4f3b608 mt76x0: use shared debugfs implementation 6aae25b mt76x0: use mt76x02_mac_work as stats handler b228a45 mt76x2u: introduce mac workqueue support 4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e 5ed28f3 mt76x0: do not perform MCU calibration for MT7630 9b844da add mt7610e firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix MAC filter related log spamJo-Philipp Wich2018-10-164-11/+78
| | | | | | | | Backport two upstream fixes to address overly verbose logging of MAC ACL rejection messages. Fixes: FS#1468 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: fix dnsmasq failure to start when ujail'dChristian Lamparter2018-10-162-2/+2
| | | | | | | | | | | | | | This patch fixes jailed dnsmasq running into the following issue: |dnsmasq[1]: cannot read /usr/share/dnsmasq/dhcpbogushostname.conf: No such file or directory |dnsmasq[1]: FAILED to start up |procd: Instance dnsmasq::cfg01411c s in a crash loop 6 crashes, 0 seconds since last crash Fixes: a45f4f50e16 ("dnsmasq: add dhcp-ignore-names support - CERT VU#598349") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [bump package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to v2.80rc1Kevin Darbyshire-Bryant2018-10-162-32/+4
| | | | | | | | | | | | 53792c9 fix typo df07182 Update German translation. Remove local patch 001-fix-typo which is a backport of the above 53792c9 There is no practical difference between our test8 release and this rc release, but this does at least say 'release candidate' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: fix compile issueHans Dedecker2018-10-151-0/+28
| | | | | | Fix compile issue in case HAVE_BROKEN_RTC is enabled Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wolfssl: update to version 3.15.3-stableDaniel Golle2018-10-151-3/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2uFelix Fietkau2018-10-141-1/+7
| | | | | | USB and PCIe devices can run the same firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)Hauke Mehrtens2018-10-143-5/+18
| | | | | | | | | | | | This adds support for the WPA3-Enterprise mode authentication. The settings for the WPA3-Enterpriese mode are defined in WPA3_Specification_v1.0.pdf. This mode also requires ieee80211w and guarantees at least 192 bit of security. This does not increase the ipkg size by a significant size. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Activate Opportunistic Wireless Encryption (OWE)Hauke Mehrtens2018-10-143-4/+21
| | | | | | | | | | | | | | | | | | OWE is defined in RFC 8110 and provides encryption and forward security for open networks. This is based on the requirements in the Wifi alliance document Opportunistic_Wireless_Encryption_Specification_v1.0_0.pdf The wifi alliance requires ieee80211w for the OWE mode. This also makes it possible to configure the OWE transission mode which allows it operate an open and an OWE BSSID in parallel and the client should only show one network. This increases the ipkg size by 5.800 Bytes. Old: 402.541 Bytes New: 408.341 Bytes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Activate Simultaneous Authentication of Equals (SAE)Hauke Mehrtens2018-10-143-9/+42
| | | | | | | | | | | | | | | | | | | | This build the full openssl and wolfssl versions with SAE support which is the main part of WPA3 PSK. This needs elliptic curve cryptography which is only provided by these two external cryptographic libraries and not by the internal implementation. The WPA3_Specification_v1.0.pdf file says that in SAE only mode Protected Management Frames (PMF) is required, in mixed mode with WPA2-PSK PMF should be required for clients using SAE, and optional for clients using WPA2-PSK. The defaults are set now accordingly. This increases the ipkg size by 8.515 Bytes. Old: 394.026 Bytes New: 402.541 Bytes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: SAE: Do not ignore option sae_require_mfpHauke Mehrtens2018-10-141-0/+26
| | | | | | This patch was send for integration into the hostapd project. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: backport build fix when OWE is activatedHauke Mehrtens2018-10-145-18/+35
| | | | | | This backports a compile fix form the hostapd project. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: sync config with default configurationHauke Mehrtens2018-10-145-35/+41
| | | | | | | | | This replaces the configuration files with the versions from the hostapd project and the adaptions done by OpenWrt. The resulting binaries should be the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netifd: update to latest git HEADHauke Mehrtens2018-10-141-2/+2
| | | | | | | | 22476ff wireless: Add Simultaneous Authentication of Equals (SAE) c6c3a0d wireless: Add Opportunistic Wireless Encryption (OWE) a117e41 wireless: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:17:26 +0000