aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* ath10k-ct firmware: Tx-hang and EAPOL handling fixes for wave-2 firmware.Ben Greear2017-10-121-10/+10
| | | | | | | | | | | | | | | | | | Changes since last LEDE release include: * Fix key-setting bug that broke sending the EAPOL 2/4 in some cases. This was a bug I introduced some time back while trying to fix .11r and simplify the key handling logic. (Patch to wpa_supplicant fixed the race with sending the 4/4 and setting the key...un-patched supplicant will still have this race and the 4-way auth will not work as reliably.) * Increase amount of active-tids that can be scheduled. This fixes a tx-stall seen with many station vdevs. * Fix bug in upstream code that would cause the maximum peer to never be scheduled for tx. Signed-off-by: Ben Greear <greearb@candelatech.com>
* net: uqmi: fix blocking in endless loops when unplugging deviceAlexandru Ardelean2017-10-091-0/+2
| | | | | | | | | | | If you unplug a QMI device, the /dev/cdc-wdmX device disappears but uqmi will continue to poll it endlessly. Then, when you plug it back, you have 2 uqmi processes, and that's bad, because 2 processes talking QMI to the same device [and the same time] doesn't seem to work well. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* conntrack-tools: switch to gitStijn Tintel2017-10-091-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been a number of interesting fixes in conntrack-tools since the current latest release. Most notable is that this fixes IPv6 conntrack table syncing when cross-compiling conntrack-tools. 7e7748d src/main: refresh help message fe32043 conntrackd.8: refresh file 47a4dda conntrackd.8: add reference to systemd 0cfe7ff doc/manual: include some bits about init systems 74a418b conntrackd: cthelper: ftp: Set match offset/len for PORT mangling d833bed conntrackd: cthelper: ftp: Fix debug print dd4b5a1 conntrackd: cthelper: Add new mdns helper 498d698 Link nfct and helper modules with `-z lazy` 9e94e85 sync-mode: print errno message on failure ab81c35 log: print messages to stdout/sderr if running in console mode 631d92b log: introduce a mechanism to know if log was initialized ccb1c8b conntrackd: replace error reporting in the config parser with dlog() bee121e conntrackd: replace fprintf calls with dlog() 5a51b04 conntrack-tools: update Arturo Borrero Gonzalez email address abb9984 helper: remove copy and paste from uapi kernel header a91a004 src: add log message when resync is requested by other node c2d8be1 systemd: fix missing log.h include f6ca216 config: drop old/obsolete/deprecated conntrackd.conf config options 8b83771 conntrack: send mark filter to kernel iff set 1ba5e76 conntrackd: cthelper: Don't leak nat_tuple 832166d conntrackd: cthelper: Free pktb after use ff843bc conntrackd: config: Do not strdup() tokens b61c454 conntrackd: cthelper: ssdp: Track UPnP eventing 8ea394e conntrackd: Remove obsolete rule to catch ambiguous Checksum option 39398cd conntrackd: CommitTimeout breaks DisableExternalCache set On 29b390a conntrack: Support IPv6 NAT 381827a conntrackd: factorice tx_queue functions 131df89 conntrackd: factorize resync operations d31bacc conntrackd: consolidate more code to use resync_send() 3d98496 conntrackd: request resync at startup ef410bf conntrackd: remove use of HAVE_INET_PTON_IPV6 9d38445 conntrackd: evaluate configuration earlier 6feded7 conntrackd: cleanup if failed forking dbfdea7 conntrackd: deprecate unix backlog configuration 210f542 conntrackd: make the daemon run in RT mode by default 37cc7f0 conntrackd: remove warning for -S d2849d1 conntrack: Show multiple CPUs stats from proc bc0b49a conntrackd: cthelper: ssdp: fix build with musl 0c77a25 tests: don't fail on modprobe since the driver might be built-in eefe649 conntrack.8: refresh manpage Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libnetfilter_conntrack: switch to gitStijn Tintel2017-10-091-6/+6
| | | | | | | | | | | | | | In order to build conntrack-tools from git, a newer version of libnetfilter_conntrack is required. As 1.0.6 is currently the latest release, switch to git. b0a7cf7 include: expose a copy of nf_conntrack_common.h f68f7b3 conntrack: fix missing break in setobjopt_undo_dnat() 79dac5a conntrack: revert getobjopt_is_nat() condition b266523 libnetfilter_conntrack: bump version to 1.0.7 e870432 labels: don't crash on NULL labelmap Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libnetfilter_queue: bump to git HEADStijn Tintel2017-10-092-13/+11
| | | | | | | | | | | | | b39cac7 src: Correct typo in the location of internal.h in #include 58cb066 src: Declare the define visibility attribute together e84b559 Revert "src: Declare the define visibility attribute together" 003c2b1 examples: set dummy connmark value to show use of NFQA_CT nested attribute 63973da doc: extend the doxygen section about NFQA_CFG_F_GSO d7f74c7 build: bump version to 1.0.3 3f9eb57 build: bump library release version too 601abd1 doc: Add information about retrieving UID/GID/SECCTX fields Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* treewide: switch git.netfilter.org to HTTPSStijn Tintel2017-10-085-5/+5
| | | | | | | As git.netfilter.org seems to support HTTPS, use that instead of HTTP which is insecure, or GIT which is blocked on many corporate networks. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipset-dns: bump to git HEADStijn Tintel2017-10-082-60/+3
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-sunxi: build for NanoPi NEODaniel Golle2017-10-081-0/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: update packages with LSDK git treesYangbo Lu2017-10-078-36/+215
| | | | | | | | | | | | | | | | | NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: rename subtargets and update makefile filesYangbo Lu2017-10-072-10/+10
| | | | | | | | Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* curl: add nghttp2 supportHans Dedecker2017-10-072-2/+9
| | | | | | Add config option support for nghttp2 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* nghttp2: add libnghttp2 packageHans Dedecker2017-10-071-0/+47
| | | | | | | | The nghttp2 library is an implementation of the Hypertext Transfer Protocol version 2 in C; it supports RFC7540 and RFC7541. The package enables only the reusable C library; binary size is 130K (X86) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* rbcfg: Implement CPU frequency controlThibaut VARENE2017-10-073-4/+139
| | | | | | | | | | | | | | | | | | | | | | This patch implements CPU frequency control as found on several routerboard devices. Supported SoCs: - QCA953X - AR9344 Tested on hAP lite and mAP lite (QCA953x): steps of 50MHz Tested on LHG 5 (AR9344): steps of 50MHz On unsupported hardware, this patch is a NOP: it will not alter the new field. "rbcfg help" will display an empty "cpu_freq" help listing. "rbcfg show" will not show the cpu_freq field. "rbcfg set/get cpu_freq" will return an error code. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [adjusted subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: escape double quoutes in wpad CFLAGSStijn Tintel2017-10-071-0/+1
| | | | | | | | | | | | | | | | | | A recent commit in hostapd added a build option to specify the default TLS ciphers. This build option is passed via CFLAGS. Due to the way CFLAGS are handled when building wpad, the compiler tries to recursively expand TLS_DEFAULT_CIPHERS, resulting in the following error: ../src/crypto/tls_openssl.c: In function 'tls_init': <command-line>:0:21: error: 'DEFAULT' undeclared (first use in this function) ../src/crypto/tls_openssl.c:1028:13: note: in expansion of macro 'TLS_DEFAULT_CIPHERS' ciphers = TLS_DEFAULT_CIPHERS; ^ Escape double quotes in the .cflags file to avoid this. Fixes: 2f78034c3ef ("hostapd: update to version 2017-08-24") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update to version 2017-08-24Koen Vandeputte2017-10-0725-478/+145
| | | | | | | | | | | | - Deleted upstreamed patches & parts - Refreshed all Compile tested: full-option package + tools (hostapd + wpa_supplicant) Run-tested: hostapd wpa2 hotspot & wpa_supplicant IBSS link Targets: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: update to latest git HEAD version (FS#1030)Hans Dedecker2017-10-061-3/+3
| | | | | | | 5df3f01 config: suppress error if no wireless config present (FS#1030) 3429bd8 system-linux: add support for hotplug event 'move' Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: fix PKG_CONFIG_DEPENDSHans Dedecker2017-10-061-1/+4
| | | | | | Add CONFIG_DROPBEAR_UTMP, CONFIG_DROPBEAR_PUTUTLINE to PKG_CONFIG_DEPENDS Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uci: bump to git HEAD versionHans Dedecker2017-10-041-3/+3
| | | | | | 5ad59ad Add bitfield_set function from libubox Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libubox: bump to git HEAD versionHans Dedecker2017-10-041-3/+3
| | | | | | | 632688e utils: nuke bitfield functions and macros f714be1 uloop: make SIGCHLD signal handling optional Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ltq-vmmc: disable for falconMathias Kresin2017-10-041-1/+1
| | | | | | | The module fails to compile with falcon. Remove the falcon depends from the module to not (try to) compile it for falcon any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-ptm: mark AmazonSE support as brokenMathias Kresin2017-10-041-0/+3
| | | | | | | | Albeit ltq-ptm is supported on AmazonSE, the package fails to compile. Mark the AmazonSE variant as broken to not mark it unnecessary harder to fix (and test) the compile error. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: use LN macroHans Dedecker2017-10-031-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: bump to v2.78Kevin Darbyshire-Bryant2017-10-028-248/+18
| | | | | | Fixes CVE-2017-14491, CVE-2017-14492, CVE-2017-14493, CVE-2017-14494, 2017-CVE-14495, 2017-CVE-14496 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* sunxi: add Orange Pi R1 supportHauke Mehrtens2017-10-013-0/+237
| | | | | | | | | | | | | | | The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix compile error on PowerPC (PPC_85xx)Hauke Mehrtens2017-10-011-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Including linux/interrupt.h in linux/hrtimer.h causes this error message on PowerPC builds on x86, ARM and MIPS it works: CC [M] /backports-4.14-rc2-1/compat/main.o In file included from /backports-4.14-rc2-1/backport-include/linux/printk.h:5:0, from ./include/linux/kernel.h:13, from /backports-4.14-rc2-1/backport-include/linux/kernel.h:3, from ./include/linux/list.h:8, from /backports-4.14-rc2-1/backport-include/linux/list.h:3, from ./include/linux/module.h:9, from /backports-4.14-rc2-1/backport-include/linux/module.h:3, from /backports-4.14-rc2-1/compat/main.c:1: ./include/linux/ratelimit.h: In function 'ratelimit_state_exit': ./include/linux/ratelimit.h:62:11: error: dereferencing pointer to incomplete type 'struct task_struct' current->comm, rs->missed); ^ ./include/linux/printk.h:279:37: note: in definition of macro 'pr_warning' printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) ^ ./include/linux/ratelimit.h:61:3: note: in expansion of macro 'pr_warn' pr_warn("%s: %d output lines suppressed due to ratelimiting\n", ^ The backport of the hrtimer_start() functions needs the linux/interrupt.h because some parts are defined there. Fix this by moving the hrtimer_start() backport to the linux/interrupt.h backport header file. Fixes: a8f63a0717f5: ("mac80211: update to backports-4.14-rc2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to backports-4.14-rc2Hauke Mehrtens2017-10-01148-7139/+911
| | | | | | | | | | | | | | | | | | | | This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: improve A20 Lime2 upload speedLucian Cristian2017-09-302-1/+14
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* package/utils/f2fs-tools: Update to 1.9.0Daniel Engberg2017-09-302-70/+5
| | | | | | | Update f2fs-tools to 1.9.0 Remove patch as its been committed upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* util-linux: update to 2.30.2Ryan Mounce2017-09-301-3/+3
| | | | Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* base-files: create /etc/config/ directoryHauke Mehrtens2017-09-301-0/+1
| | | | | | | | | | | | | | | The /bin/config_generate script and some other scripts are assuming the /etc/config directory exists in the image. This is true in case for example the package firewall, dropbear or dnsmasq are included, which are adding the files under /etc/config/. Without any of these package the system will not boot up fully because the /etc/config/ directory is missing and some init scripts just fail. Make sure all images with the base-files contain a /etc/config/ directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* iw: fix build on musl hostStijn Tintel2017-09-291-2/+1
| | | | | | | | | | | The empty version.sh script causes a problem when run by make: make[3]: /usr/bin/env bash: Shell program not found Adding a shebang line in version.sh seems to solve it. Fixes FS#977. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* util-linux: avoid using the getrandom syscallFelix Fietkau2017-09-291-0/+14
| | | | | | | | | | | getrandom blocks until the random pool is being initialized. Unfortunately, this code is being called early during init to create the overlay filesystem, on some devices leaving little chance for a successful random pool init. True randomness is not that important here, so fix this issue by sticking to using /dev/urandom, like in older versions of this code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gdb: bump to 8.0.1Stijn Tintel2017-09-293-14/+13
| | | | | | | | | | Add -static-libstdc++ to TARGET_LDFLAGS to avoid a hard dependency on libstdc++, and -Wl,--gc-sections to further reduce the size on platforms that support it. Fixes CVE-2017-9778. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mt76: update to the latest version, improves mt7603 stabilityFelix Fietkau2017-09-281-3/+3
| | | | | | | | cb83f33 mt7603: mac: fix logic in mt7603_tx_hang() 21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy() d5e945e mt7603: mcu: fix indentation of mcu command definition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: fix intel wireless-n 100 firmware package nameFelix Fietkau2017-09-281-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for accessing 802.11k neighbor report elements via ubusFelix Fietkau2017-09-281-0/+169
| | | | | | | This API can be used to distribute neighbor report entries across multiple APs on the same LAN. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for specifying device config options directly in uciFelix Fietkau2017-09-281-0/+6
| | | | | | | This is useful for tuning some more exotic parameters where it doesn't make sense to attempt to cover everything in uci directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: make ssh compression support configurableMarcin Jurkowski2017-09-282-3/+13
| | | | | | | | | Adds config option to enable compression support which is usefull when using a terminal sessions over a slow link. Impact on binary size is negligible but additional 60 kB (uncompressed) is needed for a shared zlib library. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* umdns: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | b84fdac Add debug output for service_timeout 8f7e3bc Remove incorrect comma in http service json config 9f40133 Remove ttl==255 restriction for queries Signed-off-by: John Crispin <john@phrozen.org>
* procd: Install seccomp-trace symlinkMichal Sojka2017-09-281-0/+1
| | | | Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* procd: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | ee582d1 instance: properly compare and reload respawn config 260a4cd utrace: Start the tracee only after uloop initialization 520ad3c utrace: Switch all logging to ulog 1c48104 utrace: Support non-contiguous syscall numbers 582cf97 utrace: Forward SIGTERM to the traced process 32534f7 utrace: Report ptrace errors ccde3fb seccomp: Improve error message 7f9b174 preload-seccomp: Use proper log level for error messages e3c4302 Start seccomp-enabled services via seccomp-trace 5e4ad02 seccomp: Log seccomp violations with utrace 2661b2f utrace: Use PTHREAD_SEIZE instead of PTHREAD_TRACEME b5d53c6 utrace: Deliver signals to traced processes b416ed9 utrace: Support tracing multi-threaded processes and vfork 8b7d47a utrace: Trace processes across forks c6b6ec6 utrace: Sort syscalls by number of invocations 592c532 Update trace attribute c8faedc Do not disable seccomp when configuration is not found 017f3a1 utrace: Fix off-by-one errors 5acaf15 utrace: Fix environment initialization Signed-off-by: John Crispin <john@phrozen.org>
* ramips: improve Xiaomi Mi Router 3G supportKevin Darbyshire-Bryant2017-09-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit improves support for the Xiaomi Mi Router 3G originally added in commit 6e283cdc0da25928f8148805ebef7f8f2b769ee8 Improvements: - Remove software watchdog as hardware watchdog now working as per commit 3fbf3ab44f5cebb22e30a4c8681b13341feed6a6 for all mt7621 devices. - Reset button polarity corrected - length of press determines reboot (short press) vs. reset to defaults (long press) behaviour. - Enable GPIO amber switch port LEDs on board rear - lit indicates 1Gbit link and blink on activity. Green LEDs driven directly by switch indicating any link speed and tx activity. - USB port power on/off GPIO exposed as 'usbpower' - Add access to uboot environment settings for checking/setting uboot boot order preference from user space. Changes: - Front LED indicator is physically made of independent Yellow/Amber, Red & Blue LEDs combined via a plastic 'lightpipe' to a front panel indicator, hence the colour behaviour is similar to an RGB LED. RGB LEDs are not supported at this time because they produce colour results that do not then match colour labels, e.g. enabling 'mir3g:red' and 'mir3g:blue' would result in a purple indicator and we have no such label for purple. The yellow, red & blue LEDs have been split out as individual yellow, red & blue status LEDs, with yellow being the default status LED as before and with red's WAN and blue's USB default associations removed. - Swapped order of vlan interfaces (eth0.1 & eth0.2) to match stock vlan layout. eth0.1 is LAN, eth0.2 is WAN - Add 'lwlll' vlan layout to mt7530 switch driver to prevent packet leakage between kernel switch init and uci swconfig uboot behaviour & system 'recovery' uboot expects to find bootable kernels at nand addresses 0x200000 & 0x600000 known by uboot as "system 1" and "system 2" respectively. uboot chooses which system to hand control to based on 3 environment variables: flag_last_success, flag_try_sys1_failed & flag_try_sys2_failed last_success represents a preference for a particular system and is set to 0 for system 1, set to 1 for system 2. last_success is considered *if* and only if both try_sys'n'_failed flags are 0 (ie. unset) If *either* failed flags are set then uboot will attempt to hand control to the non failed system. If both failed flags are set then uboot will check the uImage CRC of system 1 and hand control to it if ok. If the uImage CRC of system is not ok, uboot will hand control to system 2 irrespective of system 2's uImage CRC. NOTE: uboot only ever sets failed flags, it *never* clears them. uboot sets a system's failed flag if that system's was selected for boot but the uImage CRC is incorrect. Fortunately with serial console access, uboot provides the ability to boot an initramfs image transferred via tftp, similarly an image may be flashed to nand however it will flash to *both* kernels so a backup of stock kernel image is suggested. Note that the suggested install procedure below set's system 1's failed flag (stock) thus uboot ignores the last_success preference and boots LEDE located in system 2. Considerable thought has gone into whether LEDE should replace both kernels, only one (and which one) etc. LEDE kernels do not include a minimal rootfs and thus unlike the stock kernel cannot include a method of controlling uboot environment variables in the event of rootfs mount failure. Similarly uboot fails to provide an external mechanism for indicating boot system failure. Installation - from stock. Installation through telnet/ssh: - copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it from LEDE download site to /tmp - switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if wgetted from LEDE download site - run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1 - run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0 - run: nvram set flag_try_sys1_failed=1 - run: nvram commit - run: reboot Recovery - to stock. Assuming you used the above installation instructions you will have a stock kernel image in system 1. If it can be booted then it may be used to perform a stock firmware recovery, thus erasing LEDE completely. From a 'working' LEDE state (even failsafe) Failsafe only: - run: mount_root - run: sh /etc/uci-defaults/30_uboot-envtools Then do the steps for 'All' All: - run: fw_setenv flag_try_sys2_failed 1 - run: reboot The board will reboot into system 1 (stock basic kernel) and wait with system red light slowly blinking for a FAT formatted usb stick with a recovery image to be inserted. Press and hold the reset button for around 1 second. Status LED will turn yellow during recovery and blue when recovery complete. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* openvpn: update to 2.4.4Magnus Kroken2017-09-282-34/+58
| | | | | | | | | Fixes CVE-2017-12166: out of bounds write in key-method 1. Remove the mirror that was temporarily added during the 2.4.3 release. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* hostapd: update wpa_supplicant p2p configLorenzo Santina2017-09-281-91/+278
| | | | | | | | | | | | | | | | Update the config file to the latest version. Added CONFIG_EAP_FAST=y because it was the only missing flag about EAP compared to full config. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Other flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant mini configLorenzo Santina2017-09-281-100/+292
| | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant full configLorenzo Santina2017-09-281-93/+280
| | | | | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Commented CONFIG_IEEE80211W=y flag because it is set in the Makefile, only if the driver supports it. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update hostapd mini configLorenzo Santina2017-09-281-19/+237
| | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 20:48:12 +0000