aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* iproute2: avoid unneeded compiles to speed buildingTony Ambardar2021-04-224-3/+31
| | | | | | | | | | | | | | | | | | | | | | | Skip building Makefile targets that aren't packaged: tipc, dcb, ifstat, rtacct, lnstat, and man. Also, only compile targets needed for the current build variant i.e. don't compile 'tc' when building an 'ip' variant and vice versa. These changes reduce typical build times by over 30%: $ make package/iproute2/clean && time make -j8 package/iproute2/compile (old) ... real 2m24.985s user 3m12.537s sys 0m26.677s (new) ... real 1m36.945s user 2m8.734s sys 0m20.046s Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* uboot-rockchip: update to v2021.04David Bauer2021-04-205-671/+31
| | | | | | | | | Update the uboot-rockchip to the latest upstream release. Remove upstreamed patches. Tested-on: FriendlyElec NanoPi R2S Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: select kmod-backlight as dependency for kmod-drmDavid Bauer2021-04-181-1/+1
| | | | | | | | | | | | | Select kmod-backlight as dependency for kmod-drm in case kmod-backlight is compiled. This fixes kernel 5.10 build issues on x86-geode with all kmods enabled: Package kmod-drm is missing dependencies for the following libraries: backlight.ko Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: make kmod-of-mdio conflict with x86David Bauer2021-04-181-1/+1
| | | | | | | | CONFIG_MDIO_OF depends on CONFIG_OF which is not enabled for x86. Fixes builds of x86 with Kernel 5.10 due to unresolved dependencies. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-envtools: mvebu: add Buffalo LS421DEDaniel González Cabanelas2021-04-171-0/+3
| | | | | | | | The Buffalo Linkstation LS421DE NAS lacks an uboot env config file. Create it via scripts. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel/modules: move act_gact into kmod-sched-coreDENG Qingfang2021-04-171-2/+2
| | | | | | | As the name suggests, act_gact has the generic actions such as dropping and accepting packets, so move it into kmod-sched-core. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* linux-firmware: ath10k: add support for Qualcomm Atheros QCA9377Josef Schlehofer2021-04-171-0/+17
| | | | | | | | | Add firmware and board file for Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) recognized as [168c:0042]. This card supports standard 1x1 802.11ac Wave2, BT5, and MU-MIMO. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ltq-vdsl-app: extent dsl metrics with state_num and power_state_numFlorian Eckert2021-04-171-14/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the old ubus dsl API, the numbers for the individual line_states and power_states were also returned. These were not ported to the new DSL C-API. This commit adds the missing information. For this the internal values are mapped to numbers. * additional JSON output for state_num: "state_num": <map_state_number> Since not all values are meaningful only the following values are implemented, this can be extended if the future. * LSTATE_MAP_NOT_INITIALIZED * LSTATE_MAP_EXCEPTION * LSTATE_MAP_IDLE * LSTATE_MAP_SILENT * LSTATE_MAP_HANDSHAKE * LSTATE_MAP_FULL_INIT * LSTATE_MAP_SHOWTIME_NO_SYNC * LSTATE_MAP_SHOWTIME_TC_SYNC * LSTATE_MAP_RESYNC * additinal JSON output for power_level: "power_state_num": <map_power_satte_number>, Since there are not so many here, all are mapped. * PSTATE_MAP_NA, * PSTATE_MAP_L0, * PSTATE_MAP_L1, * PSTATE_MAP_L2, * PSTATE_MAP_L3, Signed-off-by: Florian Eckert <fe@dev.tdt.de> v6: Add state LSTATE_MAP_NOT_INITILIZED at the beginning of the list Start the list LSTATE_MAP with -1 Reviewed-by: Andre Heider <a.heider@gmail.com>
* odhcp6c: read user scripts from directoryLeon M. George2021-04-172-2/+6
| | | | | | | | | | | | | | Placeholder DHCP user scripts were added recently. These files make package-based installations of such scripts more difficult. Pull user callbacks from directories instead to allow packages and users to install co-existing scripts more easily. References: b4f3d93b5 odhcp6c: add a odhcp6c.user placeholder script Signed-off-by: Leon M. George <leon@georgemail.eu> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* netifd: read udhcpc user scripts from directoryLeon M. George2021-04-172-1/+6
| | | | | | | | | | | | | | Placeholder DHCP user scripts were added recently. These files make package-based installations of such scripts more difficult. Pull user callbacks from directories instead to allow packages and users to install co-existing scripts more easily. References: 130118f7a netifd: add a udhcpc.user placeholder script Signed-off-by: Leon M. George <leon@georgemail.eu> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* libsemanage: fix pkgconfig pathsRosen Penev2021-04-151-1/+3
| | | | | | The pkgconfig file currently points to host paths. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-sunxi: update ATF dependencies for 3 boardsZoltan HERPAI2021-04-151-3/+3
| | | | | | | Fix 3 board definitions that were missed in the process of moving to the a64/h6 ATF blobs. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uci: update to the latest masterRafał Miłecki2021-04-141-3/+3
| | | | | | 4b3db11 cli: add option for changing save path Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: limit crypto-hw-ccp to the x86Rafał Miłecki2021-04-131-0/+1
| | | | | | | | | | | | | | CRYPTO_DEV_CCP depends on X86 or ARM64 CRYPTO_DEV_CCP_DD depends on CPU_SUP_AMD or ARM64 Compiling this driver makes sense for x86 mainly. If one day support for ARM64 board with AMD Secure Processor gets added this package may be updated. Trying to build this package on bcm4908 was causing: ERROR: module 'build_dir/target-aarch64_cortex-a53_musl/linux-bcm4908_generic/linux-5.4.110/drivers/crypto/ccp/ccp-crypto.ko' is missing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: crypto: format "crypto-hw-ccp" dependenciesRafał Miłecki2021-04-131-1/+8
| | | | | | | Use multiples lines for better readability and sort lines. Suggested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: kernel 5.10: disable ltq-deuMathias Kresin2021-04-121-1/+1
| | | | | | | | | | For linux 5.10, kmod-ltq-deu need to be migrated to the new crypto API/framework. Leave it in tree for now and enable it only for Kernel 5.4. Maybe someone picks up the work to migrate the package. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-adsl: add kernel 5.10 compatiblityMathias Kresin2021-04-121-0/+14
| | | | | | | The pgprot argument to __vmalloc is always PAGE_KERNEL now and was removed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-vdsl: add kernel 5.10 compatiblityMathias Kresin2021-04-121-4/+16
| | | | | | | The pgprot argument to __vmalloc is always PAGE_KERNEL now and was removed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-atm/ltq-ptm: add kernel 5.10 compatiblityMathias Kresin2021-04-123-0/+25
| | | | | | | | | | The callback handling of the tasklet API was redesigned and the macros using the old syntax renamed to _OLD. The stuck queue is now passed to ndo_tx_timeout callback but not used so far. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-tapi: add kernel 5.10 compatiblityMathias Kresin2021-04-121-0/+50
| | | | | | | | | | | | | Due to SCHED_FIFO being a broken scheduler model, all users of sched_setscheduler() are converted to sched_set_fifo_low() upstream and sched_setscheduler() is no longer exported. The callback handling of the tasklet API was redesigned and the macros using the old syntax renamed to _OLD. Signed-off-by: Mathias Kresin <dev@kresin.me> ltq tapi
* lantiq: ltq-vdsl-mei: add kernel 5.10 compatiblityMathias Kresin2021-04-122-7/+71
| | | | | | proc_create_data() expects a struct of type proc_ops. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-ifxos: add kernel 5.10 compatiblityMathias Kresin2021-04-121-1/+10
| | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days and was removed with kernel version 5.6. Signed-off-by: Mathias Kresin <dev@kresin.me>
* sunxi: add support for Banana Pi M2 BerryZoltan HERPAI2021-04-121-0/+7
| | | | | | | | | | | | | | | | | | CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz Memory: 1GB DDR3 Storage: SDcard, native SATA Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT USB: 4x USB 2.0 Installation: Use the standard sunxi installation to an SD-card. While the board is very similar to the M2 Ultra board (the V40 is the automotive version of the R40), as both the u-boot and kernel supports them separately, and some pins are different, let's add a separate device spec. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-mediatek: minor fixes for bpi-r64 spi-nand default envDaniel Golle2021-04-111-5/+4
| | | | | | | * check image checksums before writing to flash * only bootmenu_0...9 are working, remove bootmenu_a entry Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add support for H6 boards and OrangePiOnePlusZoltan HERPAI2021-04-113-0/+23
| | | | | | | | | | | | | | | | | | | | Specifications: SoC Allwinner H6 @ 1.8 Ghz DRAM 1Gb LPDDR3 Power DC 5V @ 3A Video HDMI (Type 2.0A - full) Audio HDMI, on-board microphone Network 10/100/1000Mbps Ethernet (Realtek RTL8211) Storage microSD USB 1 USB2.0 Host, 1 USB2.0 OTG Debug Serial UART Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* arm-trusted-firmware-sunxi: move to use the common tf-a build code and bump ↵Zoltan HERPAI2021-04-112-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | to latest version Create a -a64 package for now. Moving to the latest ATF was tested on a SoPine A64 board. U-Boot SPL 2020.04 (Feb 19 2021 - 11:28:19 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.4(release):reboot-15854-g42b39a13d2 NOTICE: BL31: Built : 22:45:53, Feb 22 2021 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4090a28, model: SoPine with baseboard NOTICE: PSCI: System suspend is unavailable U-Boot 2020.04 (Feb 19 2021 - 11:28:19 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: SoPine with baseboard DRAM: 2 GiB Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add ATF variable for specifying which flavour to useZoltan HERPAI2021-04-112-2/+11
| | | | | | | In preparation for H6 support (which requires a separate ATF blob), add an envvar to the A64 boards specifying which ATF blob to use. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* valgrind: Fix compile problem with MIPS soft floatHauke Mehrtens2021-04-111-0/+68
| | | | | | | | valgrind does not compile any more when using a GCC 10 for MIPS with soft float. Just remove the parts which are generating assembler which would not work. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: support environment in spi-nand on bpi-r64Daniel Golle2021-04-111-3/+11
| | | | | | | Default to U-Boot env in UBI if root device is not mmc block device. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* uboot-mediatek: add spi-nand build for bananapi bpi-r64Daniel Golle2021-04-113-21/+302
| | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mt76: add missing fileFelix Fietkau2021-04-111-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-04-111-3/+3
| | | | | | | | | | 028b7152b1a9 mt76: mt7921: remove 80+80 MHz support capabilities 7714dc914df6 mt76: report Rx timestamp ffd4cf15fa0e mt76: mt7915: add mmio.c fe8717dd573a mt76: mt7615: add missing SPDX tag in mmio.c 6b293c411d22 mt76: mt7615: always add rx header translation tlv when adding stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add client mode connection monitor fixFelix Fietkau2021-04-111-0/+31
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: support rx timestamps for HE ratesFelix Fietkau2021-04-111-0/+134
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fix writing bananapi bpi-r64 envOskari Lemmela2021-04-111-3/+4
| | | | | | | Use generic functions to get env partition. Fixes: 7043e4334f0 ("mediatek: mt7622: improve sysupgrade on MMC") Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: bpi-r64: use separate partition for emmc bootloaderOskari Lemmela2021-04-111-4/+4
| | | | | | | eMMC booloader is stored to separate partition. FIP size is increased to 2MB. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* kernel: Adapt renamed can-dev.koHauke Mehrtens2021-04-111-1/+1
| | | | | | | | The can-dev.ko kernel module was moved in kernel 5.4.110 and 5.10.28. Fixes: a1311df95587 ("kernel: bump 5.10 to 5.10.28") Fixes: b0a34e886da1 ("kernel: bump 5.4 to 5.4.110") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* umdns: add missing syscalls to seccomp filterDaniel Golle2021-04-101-27/+30
| | | | | | | | | | | | | | | Looks like 'openat', 'pipe2' and 'ppoll' are now needed, possibly due to changes on libraries used by umdns now using slightly different calls. Found using /etc/init.d/umdns trace now use umdns, ie. cover all ubus call etc., then /etc/init.d/umdns stop find list of syscalls traced in /tmp/umdns.*.json Fixes: FS#3355 ("UMDNS: does not start on master with seccomp") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: oxnas: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: layerscape: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq806x: drop redundant space after case keywordsPiotr Dymacz2021-04-101-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq40xx: drop redundant space after case keywordsPiotr Dymacz2021-04-101-10/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: imx6: drop redundant space after case keywordsPiotr Dymacz2021-04-101-28/+28
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: drop shebang from uci-defaults and lib filesPiotr Dymacz2021-04-1016-18/+0
| | | | | | These files are sourced and non-executable, a shebang is redundant. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: define 'BUILD_DEVICES' for Toradex ApalisPiotr Dymacz2021-04-101-0/+1
| | | | | | | Without 'BUILD_DEVICES' defined, the U-Boot related package won't be automatically selected when building for Toradex Apalis device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: align indent size in MakefilePiotr Dymacz2021-04-101-5/+5
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: drop support for Nitrogen6x/SABRE devicesPiotr Dymacz2021-04-101-35/+0
| | | | | | | | | | | These devices never got officially supported in the tree thus it doesn't make much sense to waste our infrastructure resources and keep building dedicated U-Boot images for them. CC: Petr Štetiar <ynezz@true.cz> CC: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: add env settings for ubnt,unifi-6-lr-ubootmodDaniel Golle2021-04-091-2/+5
| | | | | | | | | Add settings for fw_printenv/fw_setenv for the Ubiquiti UniFi 6 LR when running OpenWrt's version of U-Boot. The settings should work equally with the unmodified version, but that has not yet been tested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LRDaniel Golle2021-04-094-7/+485
| | | | | | | | | | | | | | | | Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: increase NOR bl3 sizeDaniel Golle2021-04-091-0/+11
| | | | | | | | Use bl3 size of 0xa0000 instead of 0x80000 in NOR flash. This results in bl3 ending at 0xc0000 which is where the legacy bootchain typically puts U-Boot environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>