aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: netfilter: reuse kconfig and files info from include dirYousong Zhou2019-10-241-23/+9
| | | | | | Less chance of missing out kconfig symbols at least Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* toolchain: gcc: enable sanitizers for glibc toolchainYousong Zhou2019-10-241-0/+172
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-10-231-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-10-232-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-10-231-3/+3
| | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net>
* procd: update to latest git HEADHans Dedecker2019-10-221-3/+3
| | | | | | 258aa04 procd: Add cached and available to memory table Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: fix build of rtw88David Bauer2019-10-221-1/+2
| | | | | | | | | | This commit fixes failing builds because of an incorrect configuration for the kmod-rtw88 package. RTW88_8822BE as well as RTW88_8822CE have to bes selected as "y" even when building the driver as a module. Signed-off-by: David Bauer <mail@david-bauer.net>
* base-files: uci-defaults: do config flush in one shotRoman Yeryomin2019-10-221-2/+1
| | | | | | | | | | | Moving a file between tmpfs and other fs is neither faster nor safer, thus no point in doing it in two steps. Use new jshn option to write output directly to file. Originally discussed here: http://lists.openwrt.org/pipermail/openwrt-devel/2017-December/010127.html Signed-off-by: Roman Yeryomin <roman@advem.lv>
* libubox: update to latest git HEADRoman Yeryomin2019-10-221-3/+3
| | | | | | eb30a03 libubox, jshn: add option to write output to a file Signed-off-by: Roman Yeryomin <roman@advem.lv>
* firmware: add Realtek RTL8822BE/RTL8822CE firmwareDavid Bauer2019-10-221-0/+15
| | | | | | | This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware to be used with the rtw88 driver. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: add rtw88 driverDavid Bauer2019-10-221-1/+12
| | | | | | | | | This commits adds packaging for the new RTW88 driver from Realtek. It supports the Realtek 8822BE/8822CE PCIe wireless chips. For operation, the complementary firmware has to be loaded. Signed-off-by: David Bauer <mail@david-bauer.net>
* urngd: update to latest Git headPetr Štetiar2019-10-211-4/+4
| | | | | | | | | * 40f939d57c67 Tag version 1.0.1 * 9e758e6e6aec jitterentropy-rngd: update to version v1.1.0 + clang compile fix * 193586a25adc Fix wrong types in format strings used in debug build * d474977bb611 Add initial GitLab CI support Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "build: separate signing logic"John Crispin2019-10-211-9/+8
| | | | | | | | This reverts commit 4a45e69d190f72ed94878487b271ed7651dd9efa. This broke the buildbots Signed-off-by: John Crispin <john@phrozen.org>
* build: separate signing logicPaul Spooren2019-10-211-8/+9
| | | | | | | | | | | | | | | | This separates the options for signature creation and verification * SIGNED_PACKAGES create Packages.sig * SIGNED_IMAGES add ucert signature to created images * CHECK_SIGNATURE add verification capabilities to images * INSTALL_LOCAL_KEY add local key-build to /etc/opkg/keys Right now the buildbot.git contains some hacks to create images that have signature verification capabilities while not storing private keys on buildbot slaves. This commit allows to disable these steps for the buildbots and only perform signing on the master. Signed-off-by: Paul Spooren <mail@aparcar.org>
* uboot-envtools: remove erasesize from MMC configTim Harvey2019-10-211-2/+2
| | | | | | | Erasesize doesn't belong in the u-boot env config for block devices as it is known to be 512 byte aligned. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* libpcap: build with cmakeYousong Zhou2019-10-214-298/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | The main motivation is to drop and stop maintaining "100-debian_shared_lib.patch". It lacks the logic to include custom implementation of several functions like pcap_strlcpy() which can cause build failures when glibc is used [2] CAN and CAN-USB support related symbols are now handled by general linux support, see [1] "-ffunction-sections -fdata-sections" were removed as they should help much for shared libraries Size comparison before and after the change -rw-r--r-- 1 yunion yunion 238042 Oct 18 11:42 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1 lrwxrwxrwx 1 yunion yunion 16 Oct 18 13:03 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1 -> libpcap.so.1.9.1 -rwxr-xr-x 1 yunion yunion 229867 Oct 18 13:03 ipkg-x86_64/libpcap/usr/lib/libpcap.so.1.9.1 [1] On Linux, handle all CAN captures with pcap-linux.c, in cooked mode, https://github.com/the-tcpdump-group/libpcap/commit/93ca5ff7030aaf1219e1de05ec89a68384bfc50b [2] https://github.com/openwrt/packages/issues/10270 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* openssl: Add engine configuration to openssl.cnfEneas U de Queiroz2019-10-202-1/+57
| | | | | | | | | | | This adds engine configuration sections to openssl.cnf, with a commented list of engines. To enable an engine, all you have to do is uncomment the engine line. It also adds some useful comments to the devcrypto engine configuration section. Other engines currently don't have configuration commands. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* strace: update to version 5.3Josef Schlehofer2019-10-201-9/+8
| | | | | | | | | | | | Makefile changes: - moves PKG_MAINTAINER above PKG_LICENSE - Change PKG_LICENSE to LGPL-2.1-or-later and correct PKG_LICENSE_FILES - changes URL to a more appropriate one, which uses HTTPS - adds 2 spaces as an indentation in description Compile and run tested on Turris Omnia, mvebu Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bzip2: add linker option LDFLAGSleo chung2019-10-191-0/+11
| | | | | | | | | | if gcc not linker whith this LDFLAGS, "file libbz2.so.1.0.8" will recognize as pie executable ELF file ( which should be shared object). this because the file command version before 5.36 not recognize correctly. Signed-off-by: leo chung <gewalalb@gmail.com>
* kernel: add package for Epson RX-8025 and compatible I2C RTCMathew McBride2019-10-191-0/+17
| | | | | | | RX-8025 is an I2C RTC from Epson, some newer products such as the RX-8035 are also compatible. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* mac80211: Update to version 5.4-rc2Hauke Mehrtens2019-10-1958-2580/+190
| | | | | | | | | This updates mac80211 to backports based on kernel 5.4-rc2 ath10k-ct was updated to match the API changes and iw now uses the new nl80211.h header file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.3.6Hauke Mehrtens2019-10-1911-280/+23
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wwan: Double quote to prevent globbing and word splittingFlorian Eckert2019-10-182-9/+9
| | | | | | | | Fix some shellcheck warnings. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: add ec25 to databaseFlorian Eckert2019-10-182-1/+5
| | | | | | | | Add ec25 to database. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: add mc7304 to databaseFlorian Eckert2019-10-182-1/+5
| | | | | | | | Add mc7304 to database. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wwan: check new uci bus option on proto setup eventFlorian Eckert2019-10-182-13/+40
| | | | | | | | | | | | | | | If system has more then one and different wwan interface (modem). Then the wwan protohandler will always take the modem which is discovered first. The protohandler will always setup the same interface. To fix this add a new usb "bus" option which is associated with wwan device and so will set the specified interface up. With this change more then one interface could be mananged by the wwan protohandler. If the "bus" option is not set in the uci network config then the protohandler behaves as before the change. The protohanldler will take the first interface which he founds. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* procd: allow usage of * as procd_running() instance parameterAlin Nastac2019-10-182-4/+4
| | | | | | | | | | | service_running() implementation in /etc/rc.common use it. It is preferable to use wildcard than assuming the instance name is the default one. jsonfilter returns all matches when wildcards are used, hence the -l 1 argument used to limit output to only one value. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* util-linux: add more commandLucian Cristian2019-10-181-1/+16
| | | | | | at least vtysh needs it for proper listing, busybox is not modular so add it here Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* 6in4: add rfc1918 check functionSean Kenny2019-10-181-0/+19
| | | | | | | | | | | | | | | | | | | | | | | This is a precursor to adding proper support for multiple 6in4 tunnels with the already programmed tunlink parameter. This is an essential sanity check so as to not break existing and working behind NAT setups. Signed-off-by: Sean Kenny <skenny@wfap.ca> 6in4: add myip he.net api parameter logic This is to add proper support for multiple 6in4 tunnels with the already programmed tunlink parameter. As it stands before this commit, if there is a multi wan setup that consists of dynamic ips, there is no way to use the dynamic update feature as the he.net api is implicitly using the ip address of the caller. This will explicitly use the ipaddr specified in the interface config OR the ip of the tunlink interface specified in the dynamic update api call instead ONLY if the final resolved ipaddr variable is not an rfc1918 address. Signed-off-by: Sean Kenny <skenny@wfap.ca>
* lua: install luac symlink on hostAlin Nastac2019-10-181-0/+1
| | | | Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* lantiq: Fix fw_cutter LzmaWrapperChristian Franke2019-10-181-1/+1
| | | | | | | The destination buffer size `d_len` is passed to `lzma_inflate` as a pointer. Therefore, it needs to be dereferenced to compare its content. Signed-off-by: Christian Franke <nobody@nowhere.ws>
* kernel: fix MBIM descriptionBjørn Mork2019-10-171-1/+1
| | | | Signed-off-by: Bjørn Mork <bjorn@mork.no>
* fwtool: do not omit final 16 byte when image does not contain signatureJo-Philipp Wich2019-10-172-2/+4
| | | | | | | | | | | | | | | | | | The fwutil command will interpret the final 16 byte of a given firmware image files as "struct fwimage_trailer". In case these bytes do look like a valid trailer, we must ensure that we print them out along with the remainder of the image to not accidentally truncate non-trailer-images by 16 bytes when they're piped through fwtool, e.g. as part of an image verification command sequence. Some command sequences pipe images through fwtool in order to strip any possible metadata, certificate or signature trailers and do not expect bare images without any of that metadata to get truncated as other non- fwtool specific metadata is expected at the end of the file, e.g. an information block with an md5sum in case of the combined image format. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wireguard: bump to latest snapshot 20191012Kevin Darbyshire-Bryant2019-10-161-2/+2
| | | | | | | | | | | 8eb8443 version: bump snapshot be09cf5 wg-quick: android: use Binder for setting DNS on Android 10 4716f85 noise: recompare stamps after taking write lock 54db197 netlink: allow preventing creation of new peers when updating f1b87d1 netns: add test for failing 5.3 FIB changes a3539c4 qemu: bump default version Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iwinfo: update to latest Git HEADJo-Philipp Wich2019-10-161-3/+3
| | | | | | | 07315b6 nl80211: handle hidden SSIDs in wpa_supplicant scan results 3ac846e lua: fix string description of mixed WPA3 modes Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: add new acs_exclude_dfs optionFlorian Eckert2019-10-151-1/+5
| | | | | | | | | | | | The channel can be selected automatically at run time by setting channel=acs_survey or channel=0, both of which will enable the ACS survey based algorithm in hostapd. If the option acs_exclude_dfs is set in the hostpad config DFS channels from ACS are excluded on channel selection. This commit will add the possibilty to exclude the dfs channel on ACS survey. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* lantiq: fix dsl_control status handling.Martin Schiller2019-10-154-8/+8
| | | | | | | | | | Commit 7519a36774ca ("base-files,procd: add generic service status") introduced the generic 'status' command which broke the previous dsl_control status output. To fix this, let's rename the "old" command to "dslstat". Fixes: 7519a36774ca ("base-files,procd: add generic service status") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* libevent2: Update to 2.1.11Daniel Engberg2019-10-155-81/+94
| | | | | | | | | | | | Update libevent to 2.1.11 Use CMake instead GNU Autotools Backport following commits: https://github.com/libevent/libevent/commit/f05ba671931e2b4e38459899f6f63f79f99869fe ..and partially https://github.com/libevent/libevent/commit/7201062f3ef505a77baa6ccaf1cf73812462308a to fix compilation Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* lua: fix linking under glibcRosen Penev2019-10-151-2/+2
| | | | | | | | | | | | Compilation of liblua itself works, but when other packages link against it, the linker starts throwing undefined references to a bunch of math functions in libm. First discovered in a failed attempt to transition a package to uClibc++. Signed-off-by: Rosen Penev <rosenp@gmail.com> [fix commit title capitalization] Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: use a single ath10k MAC patching function with checksumAdrian Schmutzler2019-10-151-7/+1
| | | | | | | | | | | | | | | | While all ath10k eeproms have a checksum field, so far two functions for patching ath10k MAC address have been present (and been used). This merges code to provide a single function ath10k_patch_mac in caldata.sh, having its name in accordance with ath9k functions. By doing so, correct MAC patching for current and future ath10k devices should be ensured. This patch adds checksum adjustments for several targets on ath79 and lantiq. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* gdb: bump to 8.3.1Koen Vandeputte2019-10-156-31/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GDB 8.3.1 brings the following fixes and enhancements over GDB 8.3: PR c++/20020 (GDB segfault on printing objects) PR gdb/24454 (nat/x86-linux-dregs.c failed assertion) PR breakpoints/24541 (Incorrect evaluation of systemtap probes due to register being signed and probe expression assuming unsigned) PR symtab/24545 (Symbol loading performance regression with cc1) PR gdb/24592 (amd64->i386 linux syscall restart problem) PR gdb/25009 (terminate called after throwing an instance of 'srchilite::ParserException') PR gdb/25010 (Calls to error () can cause SIGTTOU to send gdb to the background) PR breakpoints/25011 (Breakpoints on file reloads broken for PIE binaries) This corrective release also brings the following testsuite fixes and enhancements: PR testsuite/25005 (gdb-caching-proc.exp takes a lot of time on skip_opencl_tests) PR testsuite/25016 (Test-case failures for -pie) GDB 8.3 includes the following changes and enhancements: * Support for new native configurations (also available as a target configuration): - RISC-V GNU/Linux (riscv*-*-linux*) - RISC-V FreeBSD (riscv*-*-freebsd*) * Support for new target configurations: - CSKY ELF (csky*-*-elf) - CSKY GNU/Linux (csky*-*-linux) - NXP S12Z ELF (s12z-*-elf) - OpenRISC GNU/Linux (or1k*-*-linux*) * Native Windows debugging is only supported on Windows XP or later. * The Python API in GDB now requires Python 2.6 or later. * GDB now supports terminal styling for the CLI and TUI. Source highlighting is also supported by building GDB with GNU Highlight. * Experimental support for compilation and injection of C++ source code into the inferior (requires GCC 7.1 or higher, built with libcp1.so). * GDB and GDBserver now support IPv6 connections. * Target description support on RISC-V targets. * Various enhancements to several commands: - "frame", "select-frame" and "info frame" commands - "info functions", "info types", "info variables" - "info thread" - "info proc" - System call alias catchpoint support on FreeBSD - "target remote" support for Unix Domain sockets. * Support for displaying all files opened by a process * DWARF index cache: GDB can now automatically save indices of DWARF symbols on disk to speed up further loading of the same binaries. * Various GDB/MI enhancements. * GDBserver on PowerPC GNU/Linux now supports access to the PPR, DSCR, TAR, EBB/PMU, and HTM registers. * Ada task switching support when debugging programs built with the Ravenscar profile added to aarch64-elf. * GDB in batch mode now exits with status 1 if the last executed command failed. * Support for building GDB with GCC's Undefined Behavior Sanitizer. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* iwinfo: update to latest Git HEADJo-Philipp Wich2019-10-151-3/+3
| | | | | | a29b7d4 nl80211: align path to phy mapping logic with mac80211.sh Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* odhcpd: update to latest git HEADHans Dedecker2019-10-141-3/+3
| | | | | | 9a4531a ndp: fix endian issue Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* treewide: move MAC address patch functions to common libraryAdrian Schmutzler2019-10-141-0/+59
| | | | | | | | | This unifies MAC address patch functions and moves them to a common script. While those were implemented differently for different targets, they all seem to do the same. The number of different variants is significantly reduced by this patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: move calibration data extraction function to libraryAdrian Schmutzler2019-10-131-0/+75
| | | | | | | | | | | | | | | | | This moves the almost identical calibration data extraction functions present multiple times in several targets to a single library file /lib/functions/caldata.sh. Functions are renamed with more generic names to merge different variants that only differ in their names. Most of the targets used find_mtd_chardev, while some used find_mtd_part inside the extraction code. To merge them, the more abundant version with find_mtd_chardev is used in the common code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [rebase on latest master; add mpc85xx] Signed-off-by: David Bauer <mail@david-bauer.net>
* base-files: move xor() from caldata extraction to functions.shAdrian Schmutzler2019-10-131-0/+16
| | | | | | | | The xor() function is defined in each of the caldata extraction scripts for several targets. Move it to functions.sh to reduce duplicate code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add kmod-iio-bme680Stijn Tintel2019-10-131-0/+45
| | | | | | | | | This driver supports the Bosch Sensortec BME680 gas, humidity, pressure and temperature sensor. Tested I2C and SPI modes on a Raspberry Pi Zero W. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* trelay: log "started" and "stopped"Ali MJ Al-Nasrawy2019-10-121-0/+8
| | | | | | It is informative especially when using multiple device pairs. Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
* trelay: fix deadlock on removeAli MJ Al-Nasrawy2019-10-121-7/+21
| | | | | | | | | | | Upon writing to "remove" file, debugfs_remove_recursive() blocks while holding rtnl_lock. This is because debugfs' file_ops callbacks are executed in debugfs_use_file_*() context which prevents file removal. Fix this by only flagging the device for removal and then do the cleanup in file_ops.release callback which is executed out of that context. Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
* trelay: handle netdevice events correctlyAli MJ Al-Nasrawy2019-10-121-1/+1
| | | | | | | | | | | | | Since v3.11, netdevice notification data are of type "struct netdev_notifier_info". Handle it as such! This should fix a critical bug in which devices are unable get released because trelay does not release resources in response to UNREGISTER event spamming the log with something like: unregister_netdevice: waiting for eth0.1 to become free. Usage count = 1 Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 06:15:57 +0000