aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ltq-atm: add Linux 5.0+ compatibilityMathias Kresin2020-03-161-0/+8
| | | | | | | | | Upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok() function") removes the first argument to access_ok. Adjust the code so it builds with Linux 5.4. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: kmod-serial-8250: fix linux 5.3 dependenciesMathias Kresin2020-03-161-1/+2
| | | | | | | Beginning with linux 5.3, kmod-serial-8250 uses functions provided by serial_mctrl_gpio.ko if GPIO support is enabled. Signed-off-by: Mathias Kresin <dev@kresin.me>
* rpcd: fix respawn settingsPetr Štetiar2020-03-161-1/+1
| | | | | | | | | | | | | | | | | | | Commit 432ec292ccc8 ("rpcd: add respawn param") has introduced infinite restarting of the service which could be reached over network. This is not recommended security practice as it might give potential adversary infinite number of tries in case there might be some issue in the rpcd or its surrounding stack. So lets remove the currently bogus `respawn_retry` variable (it wasn't possible to override it anyway), reverting to the previous default max. of 5 service restarts which could be now overriden via system's UCI settings if desired. Cc: Jo-Philip Wich <jow@mein.io> Cc: Florian Eckert <fe@dev.tdt.de> Cc: Hauke Mehrtens <hauke@hauke-m.de> Fixes: 432ec292ccc8 ("rpcd: add respawn param") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* curl: bump to 7.69.1Hans Dedecker2020-03-161-2/+2
| | | | | | For changes in 7.69.1; see https://curl.haxx.se/changes.html#7_69_1 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wwan: fix hotplug event handlingRozhuk Ivan2020-03-162-2/+3
| | | | | | | | | Hotplug manager send: "remove" -> "add" -> "bind" events, script interpret bind as "not add" = "remove" and mark device as unavailable. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* comgt: fix hotplug event handlingRozhuk Ivan2020-03-162-5/+5
| | | | | | | | | Hotplug manager send: "remove" -> "add" -> "bind" events, script interpret bind as "not add" = "remove" and mark device as unavailable. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* netifd: update to latest git HEADHans Dedecker2020-03-161-3/+3
| | | | | | dbdef93 interface-ip: transfer prefix route ownership for deprecated ipv6addr to kernel Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libnftnl: bump to 1.1.5Kevin Darbyshire-Bryant2020-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Solve missing references to nftnl_set_list_lookup_byname when building iptables with Nftables support enabled (CONFIG_IPTABLES_NFTABLES) Bump the ABI version to force everything to match. /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-bridge.o: in function `nft_bridge_parse_lookup': nft-bridge.c:(.text.nft_bridge_parse_lookup+0xcd): undefined reference to `nftnl_set_list_lookup_byname' /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-cache.o: in function `nftnl_set_list_cb': nft-cache.c:(.text.nftnl_set_list_cb+0x80): undefined reference to `nftnl_set_list_lookup_byname' /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-cache.o: in function `fetch_set_cache': nft-cache.c:(.text.fetch_set_cache+0x10a): undefined reference to `nftnl_set_list_lookup_byname' collect2: error: ld returned 1 exit status make[6]: *** [xtables-nft-multi] Error 1 make[5]: *** [all] Error 2 make[4]: *** [all-recursive] Error 1 make[3]: *** [all] Error 2 make[2]: *** [/Users/kevin/wrt/build_dir/target-x86_64_musl/linux-x86_64/iptables-1.8.4/.built] Error 2 make[2]: Leaving directory `/Users/kevin/wrt/package/network/utils/iptables' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: make kmod-i2c-mux selected by dependent modulesSungbo Eo2020-03-161-3/+3
| | | | | | | | | | | | Currently kmod-i2c-mux-* will not get into images unless kmod-i2c-mux is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-i2c-mux-pca954x Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* iproute2: revert add libcap support, enabled in ip-fullMathias Kresin2020-03-151-9/+9
| | | | | | | | | | | | | This reverts commit a6da3f9ef746101b84a6f530f5a40de28341b69a. The libcap isn't as optional as the commit messages suggests. A hard dependency to the libcap package is added, which is only available in the external packages feed. Therefore it is impossible to package ip-full without having the external packages feed up and running, which is a regression to the former behaviour. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to latest git HEADHans Dedecker2020-03-151-3/+3
| | | | | | | | 6594c6b ubus: use dhcpv6 ia assignment flag a90cc2e dhcpv6-ia: avoid setting lifetime to infinite for static assignments bb07fa4 dhcpv4: avoid setting lifetime to infinite for static assignments Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iptables: update to 1.8.4Kevin Darbyshire-Bryant2020-03-153-29/+14
| | | | | | | | | | | | | | | | Bump to iptable 1.8.4 and address packaging issue as mentioned in the original bump/revert cycle. "This reverts commit 10cbc896c0a26aecff37261450c21f29fb5b99db. The updated iptables package does not build due to the following error encountered on the buildbots: cp: cannot stat '.../iptables-1.8.4/ipkg-install/usr/lib/libiptc.so.*': No such file or directory The changelog mentions "build: remove -Wl,--no-as-needed and libiptc.so" so it appears as if further packaging changes are needed beyond a simple version bump." Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* procd: update to latest git HEADDaniel Golle2020-03-131-4/+4
| | | | | | 77a6782 jail: mount-bind /etc/resolv.conf for non-netns jails Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: convert leading spaces to tabs in functions.shAdrian Schmutzler2020-03-131-2/+2
| | | | | | Use tabs for indent consistently. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: make kmod-i2c-core selected by dependent modulesSungbo Eo2020-03-131-9/+9
| | | | | | | | | | | | | | | | | | Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-lm75 - kmod-i2c-gpio - kmod-i2c-gpio-custom - kmod-i2c-mux - kmod-i2c-ralink Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: make kmod-hwmon-core selected by dependent modulesSungbo Eo2020-03-132-2/+2
| | | | | | | | | | | | | | | | | | Currently kmod-hwmon-* will not get into images unless kmod-hwmon-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-gpiofan - kmod-hwmon-lm63 - kmod-hwmon-lm75 - kmod-hwmon-lm85 - kmod-hwmon-lm90 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx, adjust line wrapping] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: ifb: set default numifbs to 0Kevin Darbyshire-Bryant2020-03-131-0/+1
| | | | | | | | | | | | By default on module load, 2 ifb interfaces are created and typically remain unused, cluttering 'ip link' outputs and generally confusing things. sqm-scripts for example, creates its own ifb interface/s instead of using these 2 defaults ifbs. Tell the ifb module to not create any default ifbs on load via the numifbs parameter. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* procd: actually wire-up netns supportDaniel Golle2020-03-122-1/+2
| | | | | | | | When support for network namespaces was added to procd, adding the corresponding jail flag in procd.sh was ommitted. Add it now. Fixes: 97a03a4760 ("procd: update to latest git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: ls1012afrdm: introduce dynamic partitioningTomasz Maciej Nowak2020-03-121-2/+2
| | | | | | | | | | | | Combine fixed sizes of "kernel" and "rootfs" partitions into one partition managed by OpenWrt splitter, it will allow better management of chip capacity and less maintenance burden when compiled kernel image will outgrow allocated size for kernel partition. This also changes kernel image format, since splitter only manages kernel and rootfs partitions, the dtb needs to be updated with the kernel, so for convenience, kernel is packed to FIT image. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls1012afrdm: convert image to squashfsTomasz Maciej Nowak2020-03-121-1/+1
| | | | | | | This commit replaces UBIFS root partition with squashfs+overlay. It's preparation for introducing dynamic partitioning. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: resurrect support for FRDM-LS1012ATomasz Maciej Nowak2020-03-124-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: make kmod-ata-core selected by dependent modulesupstreamless-old-masterSungbo Eo2020-03-111-3/+2
| | | | | | | | | | | | | | | | Currently kmod-ata-* will not get into images unless kmod-ata-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-ata-ahci - kmod-ata-ahci-mtk - kmod-ata-sunxi While at it, use AddDepends/ata for kmod-ata-pdc202xx-old. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mt76: update to the latest versionFelix Fietkau2020-03-111-3/+3
| | | | | | a94e43f277e2 mt76: mt76x02: reset MCU timeout counter earlier in watchdog reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
* curl: bump to 7.69.0Hans Dedecker2020-03-101-2/+2
| | | | | | For changes in 7.69.0; see https://curl.haxx.se/changes.html#7_69_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: bump to v2.81rc3Kevin Darbyshire-Bryant2020-03-103-79/+2
| | | | | | | Bump to latest release candidate and drop 2 local patches that have been upstreamed. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: kmod-fs-exfat: fix typo LINUX_4_{,1}4Yousong Zhou2020-03-091-1/+1
| | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Reported-by: Petr Štetiar <ynezz@true.cz>
* kernel: add exFAT fs driverDENG Qingfang2020-03-091-0/+24
| | | | | | | | | This was available since kernel 5.4. The one provided in packages feed will be considered deprecated and renamed to kmod-fs-exfat0. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (use name kmod-fs-exfat. use "@!(LINUX_4_4||LINUX_4_19)" for dependency)
* ipq40xx: add support for 8devices Habanero DVKRobert Marko2020-03-092-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: fix lib-xor for ARM64Tim Harvey2020-03-081-2/+2
| | | | | | use LINUX_KARCH in directory path to avoid failures in non-arm targets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* uboot-mxs: bump to v2020.01Michael Heimpold2020-03-082-15/+13
| | | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-envtools: mxs: add support for olimex, imx23-olinuxinoMichael Heimpold2020-03-082-1/+4
| | | | | | Add ubootenv uci config for Olimex OLinuXino boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-imx6: bump to 2020.01 and refresh patchesPetr Štetiar2020-03-086-154/+65
| | | | | | | | | | | | | | | | | Update U-Boot to latest release, remove `100-wandboard-enable-fit.patch` as FIT support was added in commit 5b8585825128 ("wandboard: Add FIT image support"). Rework `110-mx6cuboxi-mmc-fallback.patch` into two patches as there was new config option `CONFIG_SPL_FORCE_MMC_BOOT` added upstream which should provide the same functionality as the previous patch hunk. Moving Apalis towards generic distro_bootcmd. Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* gpio-button-hotplug: remove duplicate logging textPetr Štetiar2020-03-081-3/+3
| | | | | | | | Removes one of the duplicate `gpio-keys` words found in the logs: gpio-keys gpio-keys: gpio-keysdoes not support key code:143 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add kernel module for Sensirion SPS30 PMSPetr Štetiar2020-03-081-0/+16
| | | | | | | Adds into 4.19 backported kernel module from 5.1 for Sensirion SPS30 particulate matter sensor, for kernel 5.4 backported dependency fix. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iio: split buffer modules into separate packagesPetr Štetiar2020-03-081-14/+42
| | | | | | | | | Otherwise we would need to enable IIO_TRIGGERED_BUFFER symbol in all kernels in order to be able to use any of the IIO modules which are utilizing triggered buffer based data acquisition method. Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mac80211: fix symbol dependency of rt2x00lib kernel moduleSven Over2020-03-071-2/+8
| | | | | | | | | | | | On platforms that do not have CONFIG_MTD enabled, loading the rt2x00lib kernel module fails because it depends on symbols from the mtd module ("Unknown symbol get_mtd_device_nm"). This commit disables the code that can read the eeprom from mtd if mtd is not enabled. Signed-off-by: Sven Over <sp@cedenti.st> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for Devolo Magic 2 WIFIManuel Giganto2020-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch support Devolo Magic 2 WIFI, board devolo_dlan2-2400-ac. This device is a plc wifi AC2400 router/extender with 2 Ethernet ports, has a G.hn PLC and uses LCMP protocol from Home Grid Forum. Hardware: SoC: AR9344 CPU: 560 MHz Flash: 16 MiB (W25Q128JVSIQ) RAM: 128 MiB DDR2 Ethernet: 2xLAN 10/100/1000 PLC: 88LX5152 (MaxLinear G.hn) PLC Flash: W25Q32JVSSIQ PLC Uplink: 1Gbps MIMO PLC Link: RGMII 1Gbps (WAN) WiFi: Atheros AR9340 2.4GHz 802.11bgn Atheros AR9882-BR4A 5GHz 802.11ac Switch: QCA8337, Port0:CPU, Port2:PLC, Port3:LAN1, Port4:LAN2 Button: 3x Buttons (Reset, wifi and plc) LED: 3x Leds (wifi, plc white, plc red) GPIO Switch: 11-PLC Pairing (Active Low) 13-PLC Enable 21-WLAN power MACs Details verified with the stock firmware: Radio1: 2.4 GHz &wmac *:4c Art location: 0x1002 Radio0: 5.0 GHz &pcie *:4d Art location: 0x5006 Ethernet &ethernet *:4e = 2.4 GHz + 2 PLC uplink --- *:4f = 2.4 GHz + 3 Label MAC address is from PLC uplink OEM SSID: echo devolo-$(grep SerialNumber /dev/mtd1 | grep -o ...$) OEM WiFi password: grep DlanSecurityID /dev/mtd1|tr -d -|cut -d'=' -f 2 Recommendations: Configure and link your PLC with OEM firmware BEFORE you flash the device. PLC configuration/link should remain in different memory and should work straight forward after flashing. Restrictions: PLC link detection to trigger plc red led is not available. PLC G.hn chip is not compatible with open-plc-tools, it uses LCMP protocol with AES-128 and requires different software. Notes: Pairing should be possible with gpio switch. Default configuration will trigger wifi led with 2.4Ghz wifi traffic and plc white led with wan traffic. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.100 2. Download the sysupgrade image and rename it to uploadfile 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Allow 1-2 minutes for the first boot. Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
* ath79: add support for DomyWifi DW33DWeiDong Jia2020-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit ports the device from ar71xx to the ath79 target and modifies the partition layout. 1. Firmware is installed to nand flash. 2. Modify the uboot-env parameter to boot from the nand flash. 3. The kernel size is extended to 5M. 4.nor flash retains the oem firmware. oem partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00e30000 00010000 "rootfs" mtd3: 00170000 00010000 "kernel" mtd4: 00010000 00010000 "art" mtd5: 00f90000 00010000 "firmware" mtd6: 06000000 00020000 "rootfs_data" mtd7: 02000000 00020000 "backup" new partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00fa0000 00010000 "oem-firmware" mtd3: 00010000 00010000 "art" mtd4: 00500000 00020000 "kernel" mtd5: 05b00000 00020000 "ubi" mtd6: 02000000 00020000 "oem-backup" MAC address overview: All mac addresses are stored in the art partition. eth0: 0x0 eth1: 0x6 ath9k: 0xc ath10k: 0x12 No valid addresses in 0x1002 and 0x5006. All addresses match the OEM firmware. Install from oem firmware. Enable ssh service: Connect to the router web, click professional, click system-startup, and add dropbear in the local startup input box. Click system-administration, delete ssh-key, and replace your ssh pub key. Restart the router. 1.Upload openwrt firmware to the device scp openwrt-snapshot-r11365-df60a0852c-ath79-nand-domywifi_dw33d-\ squashfs-factory.bin root@192.168.10.1:/tmp 2.modify uboot-env. ssh login to the device: fw_setenv bootcmd 'nboot 0x8050000 0;bootm || bootm 0x9fe80000' Run the fw_printenv command to check if the settings are correct. 3.Write openwrt firmware. ssh login to the device: mtd -r write /tmp/openwrt-snapshot-r11365-df60a0852c-ath79-nand-\ domywifi_dw33d-squashfs-factory.bin /dev/mtd6 The device will restart automatically and the openwrt firmware installation is complete. Restore oem firmware.just erase the kernel partition and the ubi partition. ssh login to the device: mtd erase /dev/mtd4 mtd -r erase /dev/mtd5 Reboot the device Signed-off-by: WeiDong Jia <jwdsccd@gmail.com> [alter flash instruction in commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* dnsmasq: bump to 2.81rc2 + 2 localKevin Darbyshire-Bryant2020-03-063-2/+79
| | | | | | | | | Bump to dnsmasq 2.81rc2. In the process discovered several compiler warnings one with a logical error. 2 relevant patches sent upstream, added as 2 local patches for OpenWrt Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ncurses: update to 6.2DENG Qingfang2020-03-057-19/+19
| | | | | | Update ncurses to 6.2 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* dnsmasq: bump to v2.81rc1Kevin Darbyshire-Bryant2020-03-0435-8841/+5
| | | | | | | | | | 1st release candidate for v2.81 after 18 months. Refresh patches & remove all upstreamed leaving: 110-ipset-remove-old-kernel-support.patch Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* modules: fix dwc3-qcom wrong conditionAnsuel Smith2020-03-031-1/+1
| | | | | | | Since now we support both kernel 4.19 and 5.2, change the condition to remove driver when on kernel 4.14 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* netifd: rename 20-smp-tune to 20-smp-packet-steeringAlan Swanson2020-03-031-0/+0
| | | | | | | Rename the script to be more obvious that this is for packet steering only. Signed-off-by: Alan Swanson <reiver@improbability.net>
* netifd: change RPS/XPS handling to all CPUs and disable by defaultAlan Swanson2020-03-031-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation is significantly lowering lantiq performace [1][2] by using RPS with non-irq CPUs and XPS with alternating CPUs. The previous netifd implementation (by default but could be configured) simply used all CPUs and this patch essentially reverts to this behaviour. The only document suggesting using non-interrupt CPUs is Red Hat [3] where if the network interrupt rate is extremely high excluding the CPU that handles network interrupts *may* also improve performance. The original packet steering patches [4] advise that optimal settings for the CPU mask seems to depend on architectures and cache hierarcy so one size does not fit all. It also advises that the overhead in processing for a lightly loaded server can cause performance degradation. Ideally, proper IRQ balancing is a better option with the irqbalance daemon or manually. The kernel does not enable packet steering by default, so also disable in OpenWRT by default. (Though mvebu with its hardware scheduling issues [5] might want to enable packet steering by default.) Change undocumented "default_ps" parameter to clearer "packet_steering" parameter. The old parameter was only ever set in target/linux/mediatek/base-files/etc/uci-defaults/99-net-ps and matched the default. [1] https://forum.openwrt.org/t/18-06-4-speed-fix-for-bt-homehub-5a [2] https://openwrt.ebilan.co.uk/viewtopic.php?f=7&t=1105 [3] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/performance_tuning_guide/network-rps [4] https://marc.info/?l=linux-netdev&m=125792239522685&w=2 [5] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=2e1f6f1682d3974d8ea52310e460f1bbe470390f Fixes: #1852 Fixes: #2573 Signed-off-by: Alan Swanson <reiver@improbability.net>
* kernel: iio: fix st-accel dependencies properlyPetr Štetiar2020-03-021-2/+2
| | | | | | Add missing register map access SPI/I2C modules. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iio: fix st-accel missing dependencyPetr Štetiar2020-03-021-1/+1
| | | | | | | | | | Fixes following build error on mpc85xx/p2020: Package kmod-iio-st_accel is missing dependencies for the following libraries: regmap-core.ko Fixes: 2d8f4c4fbd46 ("kernel: iio: add st-accel driver modules") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: add bootloader upgrade on sysupgradeTomasz Maciej Nowak2020-03-011-0/+5
| | | | | | | | | | | | | | Currently bootloader always stays on the same version as when first written to boot medium (not true if partition layout changed, which will trigger sysupgrade process to write full disk image). That creates inconveniences as it always stays with same features or/and bugs. Users wishing to add support to additional modules or new version, would need to write the whole image, potentially destroying previous system configuration. To fix these, this commit adds additional routine to sysupgrade which upgrades unconditionally the bootloader to the latest state provided by OpenWrt. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: iio: add fxos8700 driver supportTim Harvey2020-03-011-0/+50
| | | | | | | | Adds various kernel modules for Freescale FXOS8700 3-axis accelerometer. Signed-off-by: Tim Harvey <tharvey@gateworks.com> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iio: add st-accel driver modulesTim Harvey2020-03-011-0/+54
| | | | | | | | Adds kernel modules for various STMicroelectronics accelerometers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: can: add MCP251x CAN controller module supportTim Harvey2020-03-011-0/+17
| | | | | | | | Adds kernel module for Microchip MCP251x SPI CAN controller. Signed-off-by: Tim Harvey <tharvey@gateworks.com> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>