aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-sunxi: build for NanoPi NEODaniel Golle2017-10-081-0/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: update packages with LSDK git treesYangbo Lu2017-10-078-36/+215
| | | | | | | | | | | | | | | | | NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: rename subtargets and update makefile filesYangbo Lu2017-10-072-10/+10
| | | | | | | | Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* curl: add nghttp2 supportHans Dedecker2017-10-072-2/+9
| | | | | | Add config option support for nghttp2 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* nghttp2: add libnghttp2 packageHans Dedecker2017-10-071-0/+47
| | | | | | | | The nghttp2 library is an implementation of the Hypertext Transfer Protocol version 2 in C; it supports RFC7540 and RFC7541. The package enables only the reusable C library; binary size is 130K (X86) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* rbcfg: Implement CPU frequency controlThibaut VARENE2017-10-073-4/+139
| | | | | | | | | | | | | | | | | | | | | | This patch implements CPU frequency control as found on several routerboard devices. Supported SoCs: - QCA953X - AR9344 Tested on hAP lite and mAP lite (QCA953x): steps of 50MHz Tested on LHG 5 (AR9344): steps of 50MHz On unsupported hardware, this patch is a NOP: it will not alter the new field. "rbcfg help" will display an empty "cpu_freq" help listing. "rbcfg show" will not show the cpu_freq field. "rbcfg set/get cpu_freq" will return an error code. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [adjusted subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: escape double quoutes in wpad CFLAGSStijn Tintel2017-10-071-0/+1
| | | | | | | | | | | | | | | | | | A recent commit in hostapd added a build option to specify the default TLS ciphers. This build option is passed via CFLAGS. Due to the way CFLAGS are handled when building wpad, the compiler tries to recursively expand TLS_DEFAULT_CIPHERS, resulting in the following error: ../src/crypto/tls_openssl.c: In function 'tls_init': <command-line>:0:21: error: 'DEFAULT' undeclared (first use in this function) ../src/crypto/tls_openssl.c:1028:13: note: in expansion of macro 'TLS_DEFAULT_CIPHERS' ciphers = TLS_DEFAULT_CIPHERS; ^ Escape double quotes in the .cflags file to avoid this. Fixes: 2f78034c3ef ("hostapd: update to version 2017-08-24") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update to version 2017-08-24Koen Vandeputte2017-10-0725-478/+145
| | | | | | | | | | | | - Deleted upstreamed patches & parts - Refreshed all Compile tested: full-option package + tools (hostapd + wpa_supplicant) Run-tested: hostapd wpa2 hotspot & wpa_supplicant IBSS link Targets: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: update to latest git HEAD version (FS#1030)Hans Dedecker2017-10-061-3/+3
| | | | | | | 5df3f01 config: suppress error if no wireless config present (FS#1030) 3429bd8 system-linux: add support for hotplug event 'move' Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: fix PKG_CONFIG_DEPENDSHans Dedecker2017-10-061-1/+4
| | | | | | Add CONFIG_DROPBEAR_UTMP, CONFIG_DROPBEAR_PUTUTLINE to PKG_CONFIG_DEPENDS Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uci: bump to git HEAD versionHans Dedecker2017-10-041-3/+3
| | | | | | 5ad59ad Add bitfield_set function from libubox Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libubox: bump to git HEAD versionHans Dedecker2017-10-041-3/+3
| | | | | | | 632688e utils: nuke bitfield functions and macros f714be1 uloop: make SIGCHLD signal handling optional Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ltq-vmmc: disable for falconMathias Kresin2017-10-041-1/+1
| | | | | | | The module fails to compile with falcon. Remove the falcon depends from the module to not (try to) compile it for falcon any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-ptm: mark AmazonSE support as brokenMathias Kresin2017-10-041-0/+3
| | | | | | | | Albeit ltq-ptm is supported on AmazonSE, the package fails to compile. Mark the AmazonSE variant as broken to not mark it unnecessary harder to fix (and test) the compile error. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: use LN macroHans Dedecker2017-10-031-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: bump to v2.78Kevin Darbyshire-Bryant2017-10-028-248/+18
| | | | | | Fixes CVE-2017-14491, CVE-2017-14492, CVE-2017-14493, CVE-2017-14494, 2017-CVE-14495, 2017-CVE-14496 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* sunxi: add Orange Pi R1 supportHauke Mehrtens2017-10-013-0/+237
| | | | | | | | | | | | | | | The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix compile error on PowerPC (PPC_85xx)Hauke Mehrtens2017-10-011-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Including linux/interrupt.h in linux/hrtimer.h causes this error message on PowerPC builds on x86, ARM and MIPS it works: CC [M] /backports-4.14-rc2-1/compat/main.o In file included from /backports-4.14-rc2-1/backport-include/linux/printk.h:5:0, from ./include/linux/kernel.h:13, from /backports-4.14-rc2-1/backport-include/linux/kernel.h:3, from ./include/linux/list.h:8, from /backports-4.14-rc2-1/backport-include/linux/list.h:3, from ./include/linux/module.h:9, from /backports-4.14-rc2-1/backport-include/linux/module.h:3, from /backports-4.14-rc2-1/compat/main.c:1: ./include/linux/ratelimit.h: In function 'ratelimit_state_exit': ./include/linux/ratelimit.h:62:11: error: dereferencing pointer to incomplete type 'struct task_struct' current->comm, rs->missed); ^ ./include/linux/printk.h:279:37: note: in definition of macro 'pr_warning' printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) ^ ./include/linux/ratelimit.h:61:3: note: in expansion of macro 'pr_warn' pr_warn("%s: %d output lines suppressed due to ratelimiting\n", ^ The backport of the hrtimer_start() functions needs the linux/interrupt.h because some parts are defined there. Fix this by moving the hrtimer_start() backport to the linux/interrupt.h backport header file. Fixes: a8f63a0717f5: ("mac80211: update to backports-4.14-rc2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to backports-4.14-rc2Hauke Mehrtens2017-10-01148-7139/+911
| | | | | | | | | | | | | | | | | | | | This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: improve A20 Lime2 upload speedLucian Cristian2017-09-302-1/+14
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* package/utils/f2fs-tools: Update to 1.9.0Daniel Engberg2017-09-302-70/+5
| | | | | | | Update f2fs-tools to 1.9.0 Remove patch as its been committed upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* util-linux: update to 2.30.2Ryan Mounce2017-09-301-3/+3
| | | | Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* base-files: create /etc/config/ directoryHauke Mehrtens2017-09-301-0/+1
| | | | | | | | | | | | | | | The /bin/config_generate script and some other scripts are assuming the /etc/config directory exists in the image. This is true in case for example the package firewall, dropbear or dnsmasq are included, which are adding the files under /etc/config/. Without any of these package the system will not boot up fully because the /etc/config/ directory is missing and some init scripts just fail. Make sure all images with the base-files contain a /etc/config/ directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* iw: fix build on musl hostStijn Tintel2017-09-291-2/+1
| | | | | | | | | | | The empty version.sh script causes a problem when run by make: make[3]: /usr/bin/env bash: Shell program not found Adding a shebang line in version.sh seems to solve it. Fixes FS#977. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* util-linux: avoid using the getrandom syscallFelix Fietkau2017-09-291-0/+14
| | | | | | | | | | | getrandom blocks until the random pool is being initialized. Unfortunately, this code is being called early during init to create the overlay filesystem, on some devices leaving little chance for a successful random pool init. True randomness is not that important here, so fix this issue by sticking to using /dev/urandom, like in older versions of this code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gdb: bump to 8.0.1Stijn Tintel2017-09-293-14/+13
| | | | | | | | | | Add -static-libstdc++ to TARGET_LDFLAGS to avoid a hard dependency on libstdc++, and -Wl,--gc-sections to further reduce the size on platforms that support it. Fixes CVE-2017-9778. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mt76: update to the latest version, improves mt7603 stabilityFelix Fietkau2017-09-281-3/+3
| | | | | | | | cb83f33 mt7603: mac: fix logic in mt7603_tx_hang() 21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy() d5e945e mt7603: mcu: fix indentation of mcu command definition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: fix intel wireless-n 100 firmware package nameFelix Fietkau2017-09-281-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for accessing 802.11k neighbor report elements via ubusFelix Fietkau2017-09-281-0/+169
| | | | | | | This API can be used to distribute neighbor report entries across multiple APs on the same LAN. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for specifying device config options directly in uciFelix Fietkau2017-09-281-0/+6
| | | | | | | This is useful for tuning some more exotic parameters where it doesn't make sense to attempt to cover everything in uci directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: make ssh compression support configurableMarcin Jurkowski2017-09-282-3/+13
| | | | | | | | | Adds config option to enable compression support which is usefull when using a terminal sessions over a slow link. Impact on binary size is negligible but additional 60 kB (uncompressed) is needed for a shared zlib library. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* umdns: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | b84fdac Add debug output for service_timeout 8f7e3bc Remove incorrect comma in http service json config 9f40133 Remove ttl==255 restriction for queries Signed-off-by: John Crispin <john@phrozen.org>
* procd: Install seccomp-trace symlinkMichal Sojka2017-09-281-0/+1
| | | | Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* procd: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | ee582d1 instance: properly compare and reload respawn config 260a4cd utrace: Start the tracee only after uloop initialization 520ad3c utrace: Switch all logging to ulog 1c48104 utrace: Support non-contiguous syscall numbers 582cf97 utrace: Forward SIGTERM to the traced process 32534f7 utrace: Report ptrace errors ccde3fb seccomp: Improve error message 7f9b174 preload-seccomp: Use proper log level for error messages e3c4302 Start seccomp-enabled services via seccomp-trace 5e4ad02 seccomp: Log seccomp violations with utrace 2661b2f utrace: Use PTHREAD_SEIZE instead of PTHREAD_TRACEME b5d53c6 utrace: Deliver signals to traced processes b416ed9 utrace: Support tracing multi-threaded processes and vfork 8b7d47a utrace: Trace processes across forks c6b6ec6 utrace: Sort syscalls by number of invocations 592c532 Update trace attribute c8faedc Do not disable seccomp when configuration is not found 017f3a1 utrace: Fix off-by-one errors 5acaf15 utrace: Fix environment initialization Signed-off-by: John Crispin <john@phrozen.org>
* ramips: improve Xiaomi Mi Router 3G supportKevin Darbyshire-Bryant2017-09-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit improves support for the Xiaomi Mi Router 3G originally added in commit 6e283cdc0da25928f8148805ebef7f8f2b769ee8 Improvements: - Remove software watchdog as hardware watchdog now working as per commit 3fbf3ab44f5cebb22e30a4c8681b13341feed6a6 for all mt7621 devices. - Reset button polarity corrected - length of press determines reboot (short press) vs. reset to defaults (long press) behaviour. - Enable GPIO amber switch port LEDs on board rear - lit indicates 1Gbit link and blink on activity. Green LEDs driven directly by switch indicating any link speed and tx activity. - USB port power on/off GPIO exposed as 'usbpower' - Add access to uboot environment settings for checking/setting uboot boot order preference from user space. Changes: - Front LED indicator is physically made of independent Yellow/Amber, Red & Blue LEDs combined via a plastic 'lightpipe' to a front panel indicator, hence the colour behaviour is similar to an RGB LED. RGB LEDs are not supported at this time because they produce colour results that do not then match colour labels, e.g. enabling 'mir3g:red' and 'mir3g:blue' would result in a purple indicator and we have no such label for purple. The yellow, red & blue LEDs have been split out as individual yellow, red & blue status LEDs, with yellow being the default status LED as before and with red's WAN and blue's USB default associations removed. - Swapped order of vlan interfaces (eth0.1 & eth0.2) to match stock vlan layout. eth0.1 is LAN, eth0.2 is WAN - Add 'lwlll' vlan layout to mt7530 switch driver to prevent packet leakage between kernel switch init and uci swconfig uboot behaviour & system 'recovery' uboot expects to find bootable kernels at nand addresses 0x200000 & 0x600000 known by uboot as "system 1" and "system 2" respectively. uboot chooses which system to hand control to based on 3 environment variables: flag_last_success, flag_try_sys1_failed & flag_try_sys2_failed last_success represents a preference for a particular system and is set to 0 for system 1, set to 1 for system 2. last_success is considered *if* and only if both try_sys'n'_failed flags are 0 (ie. unset) If *either* failed flags are set then uboot will attempt to hand control to the non failed system. If both failed flags are set then uboot will check the uImage CRC of system 1 and hand control to it if ok. If the uImage CRC of system is not ok, uboot will hand control to system 2 irrespective of system 2's uImage CRC. NOTE: uboot only ever sets failed flags, it *never* clears them. uboot sets a system's failed flag if that system's was selected for boot but the uImage CRC is incorrect. Fortunately with serial console access, uboot provides the ability to boot an initramfs image transferred via tftp, similarly an image may be flashed to nand however it will flash to *both* kernels so a backup of stock kernel image is suggested. Note that the suggested install procedure below set's system 1's failed flag (stock) thus uboot ignores the last_success preference and boots LEDE located in system 2. Considerable thought has gone into whether LEDE should replace both kernels, only one (and which one) etc. LEDE kernels do not include a minimal rootfs and thus unlike the stock kernel cannot include a method of controlling uboot environment variables in the event of rootfs mount failure. Similarly uboot fails to provide an external mechanism for indicating boot system failure. Installation - from stock. Installation through telnet/ssh: - copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it from LEDE download site to /tmp - switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if wgetted from LEDE download site - run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1 - run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0 - run: nvram set flag_try_sys1_failed=1 - run: nvram commit - run: reboot Recovery - to stock. Assuming you used the above installation instructions you will have a stock kernel image in system 1. If it can be booted then it may be used to perform a stock firmware recovery, thus erasing LEDE completely. From a 'working' LEDE state (even failsafe) Failsafe only: - run: mount_root - run: sh /etc/uci-defaults/30_uboot-envtools Then do the steps for 'All' All: - run: fw_setenv flag_try_sys2_failed 1 - run: reboot The board will reboot into system 1 (stock basic kernel) and wait with system red light slowly blinking for a FAT formatted usb stick with a recovery image to be inserted. Press and hold the reset button for around 1 second. Status LED will turn yellow during recovery and blue when recovery complete. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* openvpn: update to 2.4.4Magnus Kroken2017-09-282-34/+58
| | | | | | | | | Fixes CVE-2017-12166: out of bounds write in key-method 1. Remove the mirror that was temporarily added during the 2.4.3 release. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* hostapd: update wpa_supplicant p2p configLorenzo Santina2017-09-281-91/+278
| | | | | | | | | | | | | | | | Update the config file to the latest version. Added CONFIG_EAP_FAST=y because it was the only missing flag about EAP compared to full config. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Other flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant mini configLorenzo Santina2017-09-281-100/+292
| | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant full configLorenzo Santina2017-09-281-93/+280
| | | | | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Commented CONFIG_IEEE80211W=y flag because it is set in the Makefile, only if the driver supports it. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update hostapd mini configLorenzo Santina2017-09-281-19/+237
| | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update hostapd full configLorenzo Santina2017-09-281-27/+235
| | | | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Removed flag CONFIG_WPS2 because it is no more needed due to this changelog (2014-06-04 - v2.2): "remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled whenever CONFIG_WPS=y is set". Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* curl: fix disable threaded resolverHans Dedecker2017-09-271-0/+36
| | | | | | | | | | | Bump to 7.55.1 broke the disable threaded resolver feature as reported in https://github.com/curl/curl/issues/1784. As a result curl is always compiled with the threaded resolver feature enabled which causes a dependency issue on pthread for uclibc. Fix this issue by backporting the upstream curl commit which fixes disable threaded resolver. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipset: replace patch that was reverted upstreamStijn Tintel2017-09-262-31/+25
| | | | | | Use the correct prefix for backports while at it. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-mvebu: add OpenSSL compat patchesMarko Ratkaj2017-09-252-0/+249
| | | | | | | | | | | | | | Fixes the following build issue: "undefined reference to `EVP_MD_CTX_create'" From: Jelle van der Waa <jelle@vdwaa.nl> The rsa_st struct has been made opaque in 1.1.x, add forward compatible code to access the n, e, d members of rsa_struct. EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be called to reinitialise an already created structure. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* uboot-mvebu: fix SETEXPR redefinition warningMarko Ratkaj2017-09-251-12/+8
| | | | Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* uboot-mvebu: add missing UBOOT_MAKE_FLAGS variableMarko Ratkaj2017-09-251-0/+2
| | | | | | This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* samba36: add Package/samba/DefaultStijn Tintel2017-09-251-12/+12
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:04:51 +0000