aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* mac80211: fix ATH_REG_DYNAMIC_USER_REG_HINTSRobert Marko2021-05-231-2/+2
| | | | | | | | | | | | ATH_REG_DYNAMIC_USER_REG_HINTS is currently not being set as mac80211 tries to set it as m which is not possible as its boolean only. Since its used alongside user regulatory, move it to USER_REGD. This is required for ath11k to accept regulatory changes, otherwise it wont accept any changes and will simply force US. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kexec-tools: add patch to fix issue with appended DTB and zImage on ARMAlexander Egorenkov2021-05-232-1/+53
| | | | | | | | | | | This patch fixes a recently found problem when a zImage passed to kexec-tools contains an appended DTB. In that case kexec boot fails because the decompressor wrongly tries to use the non-existing appended DTB instaed of the one passed in the register r2. - http://lists.infradead.org/pipermail/kexec/2021-April/022353.html Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
* binutils: update to 2.35.2Konstantin Demin2021-05-231-3/+3
| | | | Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* kernel: limit crypto-hw-talitos to the mpc85xx and layerscapeAleksander Jan Bajkowski2021-05-231-1/+2
| | | | | | | CONFIG_CRYPTO_DEV_TALITOS depends on FSL_SOC. This driver only makes sense on Freescale(NXP) SoCs. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: limit crypto-hw-geode to the x86/geodeAleksander Jan Bajkowski2021-05-231-1/+1
| | | | | | | CONFIG_CRYPTO_DEV_GEODE depends on X86_32. This driver only makes sense on X86\geode. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: crypto: drop kmod-crypto-pcompressAleksander Jan Bajkowski2021-05-231-14/+1
| | | | | | | | | | CONFIG_CRYPTO_PCOMP and CONFIG_CRYPTO_PCOMP2 have been removed in upstream commit[1]. This symbol doesn't exist since kernel 4.6 and this package is empty. 1. [ crypto: compress - remove unused pcomp interface ] (https://github.com/torvalds/linux/commit/110492183c4b8f572b16fce096b9d78e2da30baf) Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: crypto: drop kmod-crypto-wqAleksander Jan Bajkowski2021-05-231-10/+0
| | | | | | | | | | CONFIG_CRYPTO_WORKQUEUE was removed in upstream commit[1]. This symbol doesn't exist since kernel 5.3 and this package is empty. 1. [ crypto: cryptd - move kcrypto_wq into cryptd ] (https://github.com/torvalds/linux/commit/3e56e168638b3e7147902c3b7257a57ea573a30e) Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* wolfssl: add support for OpenVPNIvan Pavlov2021-05-232-1/+7
| | | | | | | | | | Support for wolfSSL has been upstreamed to the master OpenVPN branch in f6dca235ae560597a0763f0c98fcc9130b80ccf4, so we can use wolfSSL directly in OpenVPN. So no more needed differnt SSL engine for OpenVPN in systems based on wolfSSL library Compiled && tested on ramips/mt7620, ramips/mt7621 Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* kernel: add kmod-input-ledsAnderson McKinley2021-05-231-0/+17
| | | | | | | Adds support for LEDs on input devices. Useful for example on x86 laptops- allows re-purposing num/caps/scroll lock LEDs. Signed-off-by: Anderson McKinley <coyoso@tuta.io>
* hostapd: wolfssl: add RNG to EC keyDavid Bauer2021-05-212-1/+49
| | | | | | | | | | Since upstream commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") WolfSSL requires a RNG for the EC key when built hardened which is the default. Set the RNG for the EC key to fix connections for OWE clients. Signed-off-by: David Bauer <mail@david-bauer.net>
* wolfssl: always export wc_ecc_set_rngDavid Bauer2021-05-212-1/+51
| | | | | | | | | | | | | | | Since commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") wolfssl requires a RNG for an EC key when the hardened built option is selected. wc_ecc_set_rng is only available when built hardened, so there is no safe way to install the RNG to the key regardless whether or not wolfssl is compiled hardened. Always export wc_ecc_set_rng so tools such as hostapd can install RNG regardless of the built settings for wolfssl. Signed-off-by: David Bauer <mail@david-bauer.net>
* busybox: nslookup applet link with resolv if use glibcChen Minqiang2021-05-211-0/+4
| | | | | | | | | This fixed b36b8b6929c6d6b17edddfb4597cf6a26a991ed0 ("busybox: remove nslookup_lede/openwrt.patch") It is likely dropped by mistake, This add back the changes Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* grub2: disable liblzma dependencyDirk Neukirchen2021-05-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Florian Ekert reported: "I have build a fresh master branch recently, Since your last change [1] on grub2, I have now a new dependency on liblzma for the install package grub2-editenv. root@st-dev-07 /usr/lib # ldd /root/grub-editenv /lib/ld-musl-x86_64.so.1 (0x7f684b088000) liblzma.so.5 => /usr/lib/liblzma.so.5 (0x7f684b06d000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7f684b059000) libc.so => /lib/ld-musl-x86_64.so.1 (0x7f684b088000) This was not the case before your update. root@st-dev-07 /usr/sbin # ldd /usr/sbin/grub-editenv /lib/ld-musl-x86_64.so.1 (0x7fd970176000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7fd970162000) libc.so => /lib/ld-musl-x86_64.so.1 (0x7fd970176000) My build complains that it cannot satisfy the runtime package dependency for grub2-editenv. install -d -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin install -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/grub-editenv /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin/ find /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf Package grub2-editenv is missing dependencies for the following libraries: liblzma.so.5 make[2]: *** [Makefile:166: /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/bin/APOS/feckert/master/master-Maggie-455-ga5edc0e8e/x86_64/targets/x86/64/packages/grub2-editenv_2.06~rc1-1_x86_64.ipk] Error 1 make[2]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/package/boot/grub2' time: package/boot/grub2/pc/compile#78.64#9.79#83.88 ERROR: package/boot/grub2 failed to build (build variant: pc). make[1]: *** [package/Makefile:116: package/boot/grub2/compile] Error 1 make[1]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt' make: *** [/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/include/toplevel.mk:230: package/boot/grub2/compile] Error 2 If I add the following changes to the package all works as expected. <snip> - DEPENDS:=@TARGET_x86 + DEPENDS:=@TARGET_x86 +liblzma VARIANT:=pc endef This is a hotfix but I dont´t think this is the final solution, because lzma is provided by the package xz. And This is maintained in the package feed [not the core]" Dirk stated & offered his patch to disable liblzma and thus resolve the 'out of core dependency' problem: "LZMA is used in mkimage.c disabling it prints Without liblzma (no support for XZ-compressed mips images) (explicitly disabled) (see configure.ac) liblzma is autodetected so this issue was present but hidden somehow [unsure: grep/image generation does not use grub with that option] OpenWrt does not use that feature currently [!] some scripts and examples use --compression=xz or -C xz and those will break grub has an internal xzlib for different "lzma" functionality (ext. LIBLZMA from XZ (GRUB_COMPRESSION_XZ) vs. GRUB_COMPRESSION_LZMA)" Hopefully fixes e74d81ece2e2932a4f370d8e6d180061a6a2c229 and doesn't break anything else. Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name> [include Florian's description of how problem 1st encountered] [bump package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uboot-envtools: support uci-default config also per subtargetsPiotr Dymacz2021-05-201-3/+7
| | | | | | | | | | The current version of 'uboot-envtools' package generates dedicated uci-default file only per target. This change makes it possible to use subtarget-specific files, with name pattern: 'target_subtarget' (example: 'ath79_nand'). The subtarget-specific files will take precedence over target-specific one. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: update BUILD_DEVICES valuesPiotr Dymacz2021-05-201-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: drop 'HIDDEN' flag from 'mx6cuboxi' definePiotr Dymacz2021-05-201-1/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* Revert "base-files: migrate old UCI network bridge ports syntax"Rafał Miłecki2021-05-201-23/+0
| | | | | | | | | This reverts commit f716c30241d5fd9d821560f58d0af0c3ffe78600. Migrating everyone to the new syntax could break downgrades. We may reintroduce it way later if needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to the latest masterRafał Miłecki2021-05-201-3/+3
| | | | | | | config: fix ifname->ports compat rename Fixes: 829b5c2ba32f ("netifd: update to the latest version") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate bridge device sections with br- name prefixRafał Miłecki2021-05-201-2/+2
| | | | | | | | | | | Missing br- prefix could result in name conflict between DSA port interface and bridge interface. Some devices with just one LAN port use "lan" interface name for DSA port. Trying to create bridge with the same "lan" name was failing. Reported-by: David Bauer <mail@david-bauer.net> Fixes: 43fc720657c6 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* busybox: preserve crontabsPhilip Prindeville2021-05-192-4/+18
| | | | | | | | | | | | /etc/syslog.conf is used by sysklogd, and /etc/crontabs is used by crond, both features of busybox. Given this, ownership for these files should be bound to busybox, especially if one day there's a way to do an in-place opkg update of busybox. There's also the busybox provided syslogd which uses this file if CONFIG_BUSYBOX_FEATURE_SYSLOGD_CFG is set. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* busybox: remove nslookup_lede/openwrt.patchNick Hainke2021-05-194-995/+3
| | | | | | | | | | | | | | | | | | The nslookup_lede/openwrt applet was introduced in de5b8e5. It was introduced because: Add a new LEDE nslookup applet which is compatible with musl libc and providing more features like ability to specify query type. In contrast to busybox' builtin nslookup applet, this variant does not rely on libc resolver internals but uses explicit send logic and the libresolv primitives to parse received DNS responses. In busybox this applet is added in 0dd3be8. In particular, this commit introduces the variable NSLOOKUP_BIG. We set the default to true and so nothing changes. Signed-off-by: Nick Hainke <vincent@systemli.org>
* busybox: show reproducible timestampPaul Spooren2021-05-192-4/+80
| | | | | | | | | | | | | | | | | | | | On login busybox shows a timestamp per default contianing the build date. Since the build date isn't reproducible per default this behaviour was disabled by default via 34df4d40 "busybox: disable timestamp in version". This commit modifies busybox so that the printed timestamp reproducible using SOURCE_DATE_EPOCH and therefore shouldn't be disabled anymore. Before: BusyBox v1.33.1 () built-in shell (ash) After: BusyBox v1.33.1 (2021-05-13 09:34:34 UTC) built-in shell (ash) Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: migrate old UCI network bridge ports syntaxRafał Miłecki2021-05-181-0/+23
| | | | | | | | netifd has been recently patched to use more accurate "ports" option instead of "ifname". This is a simple translation between two UCI options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate "device" UCI type section for bridgeRafał Miłecki2021-05-181-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This switches from the old way of defining bridges in an "interface" UCI section type (that should be used for layer 3 only). From now a defualt board switch will have its own "device" UCI section type. It's a new & preferred way of defining L2 devices. Before: config interface 'lan' option type 'bridge' option ifname 'lan1 lan2 lan3 lan4' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' After: config device option name 'lan' option type 'bridge' list ports 'lan1' list ports 'lan2' list ports 'lan3' list ports 'lan4' config interface 'lan' option ifname 'lan' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* rpcd: fix PKG_MIRROR_HASHDavid Bauer2021-05-181-1/+1
| | | | | | Fixes commit 97e820c6d61d ("rpcd: update to latest HEAD") Signed-off-by: David Bauer <mail@david-bauer.net>
* busybox: use $(AUTORELEASE) and SPDXPaul Spooren2021-05-181-6/+3
| | | | | | | | use AUTORELEASE since BusyBox is often updaten and PKG_RELEASE is not consistently bumped. Also use SPDX license headers to be machine readable and bump the copyright year to 2021. Signed-off-by: Paul Spooren <mail@aparcar.org>
* netifd: update to the latest versionFelix Fietkau2021-05-181-4/+4
| | | | | | | | | | 02dd2f2df7cb fix unannotated fall-through warnings 3052f2f67686 extdev: remove unused function 2a97fd006c3b device: add support for configuring devices with external auth handler 87e469be0c08 wireless: fix memory corruption bug when using vlans/station entries in the config 7277764bf817 bridge: rename "ifname" attribute to "ports" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add patch for disabling automatic bridging of vlan interfacesFelix Fietkau2021-05-182-3/+40
| | | | | | | netifd is responsible for handling that, except if the vlan bridge was provided by the config Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notifications for adding/removing vlan interfacesFelix Fietkau2021-05-184-1/+78
| | | | | | | This can be used to handle network configuration of dynamically created vlan interfaces in a more flexible way Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2021-05-181-3/+3
| | | | | | | | | | | | 870acee325fe tests: cram: test_base64: fix failing tests 4d8995e91d56 tests: cram: test_base64: really fix failing tests 551d75b5662c libubox: tests: add more blobmsg/json test cases a0dbcf8b8f96 tests: add blob-buffer overflow test b36a3a90098d blob: fix exceeding maximum buffer length b8abed749423 utils.h: add fallthrough macro b14c4688612c json_script: fix unannotated fall-through warning Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: use "ports" array in board.json network for bridgesRafał Miłecki2021-05-182-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | Bridge aggregates multiple ports so use a more accurate name ("ports") and format (array) for storing them in board.json. Example: "network": { "lan": { "ports": [ "lan1", "lan2", "lan3", "lan4" ], "protocol": "static" }, "wan": { "ifname": "wan", "protocol": "dhcp" } } Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* openwrt-keyring: Only copy sign key for snapshotsHauke Mehrtens2021-05-171-2/+3
| | | | | | | | | | Instead of adding all public signature keys from the openwrt-keyring repository only add the key which is used to sign the master feeds. If one of the other keys would be compromised this would not affect users of master snapshot builds. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for ZiKing CPE46BGiulio Lorenzo2021-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZiKing CPE46B is a POE outdoor 2.4ghz device with an integrated directional antenna. It is low cost and mostly available via Aliexpress, references can be found at: - https://forum.openwrt.org/t/anddear-ziking-cpe46b-ar9331-ap121/60383 - https://git.lsd.cat/g/openwrt-cpe46b Specifications: - Atheros AR9330 - 32MB of RAM - 8MB of flash (SPI NOR) - 1 * 2.4ghz integrated antenna - 2 * 10/100/1000 ethernet ports (1 POE) - 3 * Green LEDs controlled by the SoC - 3 * Green LEDs controlled via GPIO - 1 * Reset Button controlled via GPIO - 1 * 4 pin serial header on the PCB - Outdoor packaging Flashing instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. In case of issues with the vendor GUI, the vendor Telnet console is vulnerable to command injection and can be used to gain a shell directly on the OEM OpenWrt distribution. Signed-off-by: Giulio Lorenzo <salveenee@mortemale.org> [fix whitespaces, drop redundant uart status and serial0, drop num-chipselects, drop 0x1002 MAC address for wmac] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: change logging for upgrade on fwtoolFlorian Eckert2021-05-171-3/+3
| | | | | | | | | Remove vn call in favour of v call. This commit serves as preparation for removing the v function call. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [alter slightly to prevent double space after colon] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* fstools: add missing #define _GNU_SOURCEDaniel Golle2021-05-161-2/+2
| | | | | | asprintf requires _GNU_SOURCE to be defined. Set it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* grub2: bump to 2.06-rc1Stijn Tintel2021-05-163-79/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building GRUB with binutils 2.35.2 or later, an error occurs due to a section .note.gnu.property that is placed at an offset such that objcopy needs to pad the img file with zeros. This in turn causes the following error: "error: Decompressor is too big.". The fix accepted by upstream patches a python script that isn't executed at all when building GRUB with OpenWrt buildroot. There's another patch that patches the files generated by that python script directly, but by including it we would deviate further from upstream. Instead of doing that, simply bump to the latest release candidate. As one of the fixes for the CVEs causes grub to crash on some x86 hardware using legacy BIOS when compiled with -O2, filter -O2 and -O3 out of TARGET_CFLAGS. Fixes the following CVEs: - CVE-2020-14372 - CVE-2020-25632 - CVE-2020-25647 - CVE-2020-27749 - CVE-2020-27779 - CVE-2021-3418 - CVE-2021-20225 - CVE-2021-20233 Runtime-tested on x86/64. Fixes: FS#3790 Suggested-by: Dirk Neukirchen <plntyk.lede@plntyk.name> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* umdns: bump to git HEADStijn Tintel2021-05-161-3/+3
| | | | | | 777a0b service: fix compilation with GCC 10 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* fstools: update to git HEADDaniel Golle2021-05-161-3/+3
| | | | | | | | | | | | c44b40b overlay: fix syncronizing typo b5397a1 fstools: block: fix segfault on mount with no target bd7cc8d block: use dynamically allocated target string 6d8450e blockd: use allocated strings instead of fixed buffers d47909e libblkid-tiny: fix buffer overflow 67d2297 block: match device path instead of assuming /dev/%s 2aeba88 block: allow autofs and umount commands also on MTD/UBI Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2021-05-151-3/+3
| | | | | | | 28b162366d09 mt76: fix calling mt76_get_of_eeprom with an offset for pre-cal data 9d736545bb5a mt76: mt7915: disable pre-calibration support for now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uclient: update to Git version 2021-05-14Baptiste Jonglez2021-05-141-3/+3
| | | | | | | | 6a6011d uclient-http: set eof mark when content-length is 0 19571e4 tests: fix help usage test for uclient built with sanitizer c5fc04b tests: fix help usage test Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* busybox: disable PREFER_IPV4_ADDRESSBaptiste Jonglez2021-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREFER_IPV4_ADDRESS is broken on IPv6-only hosts, as it causes busybox utilities (ping, traceroute, ntpd) to forcibly use the A record instead of the AAAA record when resolving a DNS name. This obviously fails when there is no IPv4 connectivity. Since IPv6-only hosts or routers will only become more common over time, disable PREFER_IPV4_ADDRESS to support this use-case. As a side-effect, disabling PREFER_IPV4_ADDRESS changes the default resolution behaviour of busybox utilities on dual-stack hosts. Busybox utilities now simply use the order given by getaddrinfo(), so they will now prefer IPv6 addresses when resolving a name with both A and AAAA records if there is IPv6 connectivity. This is in line with RFC 6724. PREFER_IPV4_ADDRESS was likely intended to work around naive implementations of getaddrinfo() that could return AAAA records first, even on an IPv4-only host. But both musl (since 1.1.3) and glibc correctly implement RFC 6724 for getaddrinfo() and check connectivity to determine the correct order in which to return records. On IPv4-only hosts, getaddrinfo() will return A records first, so there is no need for the PREFER_IPV4_ADDRESS hack. See also: https://bugs.busybox.net/show_bug.cgi?id=12381 Fixes: FS#84 Fixes: FS#2608 References: https://github.com/openwrt/openwrt/pull/4167 Signed-off-by: Alexander Traud <pabstraud@compuserve.com> Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* build: introduce $(MKHASH)Leonardo Mörlein2021-05-137-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, it was assumed that mkhash is in the PATH. While this was fine for the normal build workflow, this led to some issues if make TOPDIR="$(pwd)" -C "$pkgdir" compile was called manually. In most of the cases, I just saw warnings like this: make: Entering directory '/home/.../package/gluon-status-page' bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found [...] While these were only warnings and the package still compiled sucessfully, I also observed that some package even fail to build because of this. After applying this commit, the variable $(MKHASH) is introduced. This variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the correct path. Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
* mt76: update to the latest versionFelix Fietkau2021-05-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | Includes fix for CVE-2020-24588 c7dd54a22e30 mt76: connac: skip wtbl reset on sta disconnect 3511fd430356 mt76: validate rx A-MSDU subframes aedc3145de6e mt76: fix possible NULL pointer dereference in mt76_tx 5c2baab92cd0 mt76: mt7615: fix NULL pointer dereference in tx_prepare_skb() af21659ee834 mt76: mt76x0: use dev_debug instead of dev_err for hw_rf_ctrl e423c16f16f7 mt76: mt7615: free irq if mt7615_mmio_probe fails f2d0da8da9b7 mt76: mt7663: enable hw rx header translation d2713a5d9de9 mt76: mt7921: fix mt7921_wfsys_reset sequence ce5f32d84f33 mt76: mt7921: Don't alter Rx path classifier 8ab8c7747197 mt76: connac: fw_own rely on all packet memory all being free a747b0bb4956 mt76: mt7921: enable deep sleep at runtime 2e6e999509b1 mt76: mt7921: add deep sleep control to runtime-pm knob 30bcb2338ce2 mt76: connac: fix WoW with disconnetion and bitmap pattern 56518f4a126e mt76: mt7921: consider the invalid value for to_rssi e969ab10a034 mt76: mt7921: add back connection monitor support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: update to 1.33.1Nick Hainke2021-05-125-132/+3
| | | | | | | | | | | | | | Remove backports: - 001-backport1330fix-ash-make-strdup-copy.patch - 002-backport1330fix-traceroute.patch - 005-backport-CVE-2021-28831.patch Remove upstreamed: - 010-fix-wrong-variable.patch Signed-off-by: Nick Hainke <vincent@systemli.org> [don't use $(AUTORELEASE) for now] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: backport upstream fixes for FragAttacksFelix Fietkau2021-05-1223-7/+1466
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the patch series description: Several security issues in the 802.11 implementations were found by Mathy Vanhoef (New York University Abu Dhabi), who has published all the details at https://papers.mathyvanhoef.com/usenix2021.pdf Specifically, the following CVEs were assigned: * CVE-2020-24586 - Fragmentation cache not cleared on reconnection * CVE-2020-24587 - Reassembling fragments encrypted under different keys * CVE-2020-24588 - Accepting non-SPP A-MSDU frames, which leads to payload being parsed as an L2 frame under an A-MSDU bit toggling attack * CVE-2020-26139 - Forwarding EAPOL from unauthenticated sender * CVE-2020-26140 - Accepting plaintext data frames in protected networks * CVE-2020-26141 - Not verifying TKIP MIC of fragmented frames * CVE-2020-26142 - Processing fragmented frames as full frames * CVE-2020-26143 - Accepting fragmented plaintext frames in protected networks * CVE-2020-26144 - Always accepting unencrypted A-MSDU frames that start with RFC1042 header with EAPOL ethertype * CVE-2020-26145 - Accepting plaintext broadcast fragments as full frames * CVE-2020-26146 - Reassembling encrypted fragments with non-consecutive packet numbers * CVE-2020-26147 - Reassembling mixed encrypted/plaintext fragments In general, the scope of these attacks is that they may allow an attacker to * inject L2 frames that they can more or less control (depending on the vulnerability and attack method) into an otherwise protected network; * exfiltrate (some) network data under certain conditions, this is specific to the fragmentation issues. A subset of these issues is known to apply to the Linux IEEE 802.11 implementation (mac80211). Where it is affected, the attached patches fix the issues, even if not all of them reference the exact CVE IDs. In addition, driver and/or firmware updates may be necessary, as well as potentially more fixes to mac80211, depending on how drivers are using it. Specifically, for Intel devices, firmware needs to be updated to the most recently released versions (which was done without any reference to the security issues) to address some of the vulnerabilities. To have a single set of patches, I'm also including patches for the ath10k and ath11k drivers here. We currently don't have information about how other drivers are, if at all, affected. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: add SRV support to nslookup_lede.c patchPerry Melange2021-05-122-2/+22
| | | | | | | | | | Add support for querying and parsing SRV DNS records to nslookup_lede.c This patch is based on http://lists.busybox.net/pipermail/busybox/2019-June/087359.html Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com> [reword subject, bump PKG_RELEASE] Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: shinit: properly handle dashes in service namesJo-Philipp Wich2021-05-121-1/+1
| | | | | Fixes: FS#3801 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix opkg install step for large package selectionAlexander Egorenkov2021-05-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the list of packages to be installed in a built image exceeds a certain number, then 'opkg install' executed for target '$(curdir)/install' in package/Makefile fails with: /usr/bin/env: Argument list too long. On Linux, the length of a command-line parameter is limited by MAX_ARG_STRLEN to max 128 kB. * https://elixir.bootlin.com/linux/latest/source/include/uapi/linux/binfmts.h#L15 * https://www.in-ulm.de/~mascheck/various/argmax/ To solve the problem, store the package list being passed to 'opkg install' in a temporary file and use the shell command substitution to pass the content of the file to 'opkg install'. This guarantees that the length of the command-line parameters passed to the bash shell is short. The following bash script demonstrates the problem: ---------------------------------------------------------------------------- count=${1:-1000} FILES="" a_file="/home/egorenar/Repositories/openwrt-rel/bin/targets/alpine/generic/packages/base-files_1414-r16464+19-e887049fbb_arm_cortex-a15_neon-vfpv4.ipk" for i in $(seq 1 $count); do FILES="$FILES $a_file" done env bash -c "echo $FILES >/dev/null" echo "$FILES" | wc -c ---------------------------------------------------------------------------- Test run: ---------------------------------------------------------------------------- $ ./test.sh 916 130989 $ ./test.sh 917 ./test.sh: line 14: /bin/env: Argument list too long 131132 ---------------------------------------------------------------------------- Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net> [reword commit subject] Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: add kmod-leds-uledsKeith T. Garner2021-05-121-0/+14
| | | | | | | | | The allows userspace LEDs to be created and controlled. This can be useful for testing triggers and can also be used to implement virtual LEDs. Signed-off-by: Keith T. Garner <kgarner@kgarner.com> [squash fixup commit and improve option wording] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mt76: update to the latest versionFelix Fietkau2021-05-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 186af01047b2 mt76: mt7921: introduce MCU_EVENT_LP_INFO event parsing 93b5c28c97d5 mt76: mt7921: add rcu section in mt7921_mcu_tx_rate_report a8e89c5a1d1f mt76: testmode: add support to send larger packet a0cc9a9e3877 mt76: mt7915: rework mt7915_tm_set_tx_len() c8b96630324e mt76: mt7915: fix rate setting of tx descriptor in testmode 22fd2958c42a mt76: mt7615: fix memleak when mt7615_unregister_device() 7401e0db3143 mt76: mt7915: fix memleak when mt7915_unregister_device() c3656268b3f6 mt76: mt7915: only free skbs after mt7915_dma_reset() when reset happens 0ce955b04ba8 mt76: mt7615: only free skbs after mt7615_dma_reset() when reset happens b03d1e62acf7 mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put() 5ac02e22fb03 mt76: flush tx status queue on DMA reset c71f609b398a mt76: sync with upstream changes 23ecadd4af77 mt76: mt7615: fix hardware error recovery for mt7663 57a899ee3c3c mt76: mt7615: fix entering driver-own state on mt7663 42a2dddb706b mt76: mt7615: load ROM patch before checking patch semaphore status cf0e406af84a mt76: mt7915: add support for applying pre-calibration data 459940ccbc58 mt76: mt7921: move hw configuration in mt7921_register_device 0a094b11f3c0 mt76: improve mcu error logging bf536832e37d mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex 7616f4f78163 mt76: mt7921: add wifisys reset support in debugfs e620bd881ef5 mt76: mt7921: abort uncompleted scan by wifi reset e8dacf59ab1c mt76: mt7915: rework the flow of txpower setting c8c78e577236 mt76: mt7915: directly read per-rate tx power from registers 1622bf4f8705 mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_device ef96fafad8a9 mt76: Convert to DEFINE_SHOW_ATTRIBUTE 90e4bfea2948 mt76: mt7921: do not use 0 as NULL pointer 0a139d7f5966 mt76: connac: move mcu_update_arp_filter in mt76_connac module de26c73ce3c2 mt76: mt7921: remove leftover function declaration 1c0b6cb4f942 mt76: mt7921: fix a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrl 2923e3e2b8e4 mt76: mt7663: fix a race between mt7615_mcu_drv_pmctrl and mt7615_mcu_fw_pmctrl 74d0fdaa7a99 mt76: connac: introduce wake counter for fw_pmctrl synchronization 28c87e09a5ea mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path 36f664edc7db mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path 51b3d1a9a2b7 mt76: dma: add the capability to define a custom rx napi poll routine 4f1339c9fb72 mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi 1bc5e67a60be mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi 325f7b451c03 mt76: connac: unschedule ps_work in mt76_connac_pm_wake 12115052a02f mt76: connac: check wake refcount in mcu_fw_pmctrl e5d28e3cef66 mt76: connac: remove MT76_STATE_PM in mac_tx_free 475112a3cdcc mt76: mt7921: get rid of useless MT76_STATE_PM in mt7921_mac_work 112998f32d85 mt76: connac: alaways wake the device before scanning 4334f3e2fc43 mt76: mt7615: rely on pm refcounting in mt7615_led_set_config 0562380659ad mt76: connac: do not run mt76_txq_schedule_all directly acfa78df5708 mt76: connac: use waitqueue for runtime-pm ca74a4cd0722 mt76: remove MT76_STATE_PM in tx path 0c2d3e74852e mt76: mt7921: add awake and doze time accounting 45e0eefffe9f mt76: mt7921: enable sw interrupts fd2ff641166f mt76: mt7615: Fix a dereference of pointer sta before it is null checked 7e2521468767 mt76: mt7921: move mt7921_dma_reset in dma.c c9dd6b1fa171 mt76: mt7921: introduce mt7921_wpdma_reset utility routine 2ac7c7e9c568 mt76: mt7921: introduce mt7921_dma_{enable,disable} utilities 662a89f2b9d1 mt76: mt7921: introduce mt7921_wpdma_reinit_cond utility routine 614efe9e9180 mt76: connac: introduce mt76_connac_mcu_set_deep_sleep utility 0dbb16ef39d8 mt76: mt7921: enable deep sleep when the device suspends 3c19f569cc70 mt76: mt7921: fix possible invalid register access ade1f5aad4c6 mt76: move token_lock, token and token_count in mt76_dev 8d5c456be1ff mt76: move token utilities in mt76 common module fb04d9df5e52 mt76: mt7915: do not read rf value from efuse in flash mode 2126b2176336 mt76: mt7921: get rid of mcu_reset function pointer d325b7eff1b1 mt76: mt7921: improve doze opportunity 2ae25c7e547e mt76: mt7663: add awake and doze time accounting 349bbb9d6f13 mt76: connac: unschedule mac_work before going to sleep 98a235004dea mt76: mt7921: mt7921_stop should put device in fw_own state 63d80b9ab251 mt76: mt7921: introduce mt7921_mcu_sta_add routine 3c5bf837fdbd mt76: mt7615: fix a precision vs width bug in printk ded14da5eacc mt76: mt7915: fix a precision vs width bug in printk aaf0d254f9ea mt76: mt7921: fix a precision vs width bug in printk 757af5c67d32 mt76: move mt76_token_init in mt76_alloc_device ed41ed73a495 mt76: mt7921: reinit wpdma during drv_own if necessary 92fb81e085c6 mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report 53d915a23bc9 mt76: connac: do not schedule wake_work if the runtime-pm is disabled 23fe1bdcf15a mt76: connac: do not schedule mac_work if the device is not running e5b19336c58e mt76: mt7615: do not set MT76_STATE_PM at bootstrap 0fc2136a61dd mt76_connac_mcu: move mt76_connac_mcu_update_arp_filter outside of CONFIG_PM e693f3e23e06 mt76: mt7915: add MSI support 5231e7300fa4 mt7915: disable ASPM 554b50dabf54 mt76: connac: fix uninitialized HT A-MPDU setting field in STA_REC_PHY 43b9c0a838bb mt76: mt7921: fix max aggregation subframes setting 5a387a0a3004 mt76: mt7921: enable rx hw de-amsdu c8cbcb87be07 mt76: connac: add missing configuration in mt76_connac_mcu_wtbl_hdr_trans_tlv 55921e57b380 mt76: mt7921: enable rx header traslation offload 01441f67d8b2 mt76: mt7921: enable rx csum offload c9ab76dd93a0 mt76: mt7915: move mt7915_queue_rx_skb to mac.c caedb4c4ee41 mt76: mt7615: fix fixed-rate tx status reporting c6ae95d43e6d mt76: improve tx status codepath 27d468d094e6 mt76: mt7915: rework tx rate reporting 3b4ca5b09e2c mt76: mt7615: avoid use of ieee80211_tx_info_clear_status e1f07d7f1cb9 mt76: mt7603: avoid use of ieee80211_tx_info_clear_status 18513ba5fbc2 mt76: mt7915: add support for tx status reporting 35f189cf81b2 mt76: mt7915: fix uninitialized variable in MSI error handling 9e928ac1ea9b mt76: dma: use ieee80211_tx_status_ext to free packets when tx fails 628eee9c386c mt76: fill queue entry wcid for all skbs with a station a9bc4d94b7a1 mt76: intialize tx queue entry wcid to 0xffff by default 998ca8af7d17 mt76: mt7915: fix tssi indication field of DBDC NICs 7dd24b3cfacf mt76: mt7915: fix a signedness bug in mt7915_mcu_apply_tx_dpd() 535025d65d8d mt76: mt7915: cleanup mt7915_mcu_sta_rate_ctrl_tlv() ff8bbe22dd87 mt76: mt7915: add .set_bitrate_mask() callback Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 00:59:06 +0000