aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 3.18 to 3.18.123Koen Vandeputte2018-09-261-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.119Koen Vandeputte2018-08-203-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120, adm8668, au1000, mcs814x, ppc40x, ppc44x, xburst Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: only optimized for size if small_flashMathias Kresin2018-07-122-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mark all v3.18 and v4.4 kernels are source-onlyJohn Crispin2018-05-241-1/+1
| | | | | | These will be removed if not updated to v4.4 Signed-off-by: John Crispin <john@phrozen.org>
* treewide: remove obsolete sysupgrade watchdog killMathias Kresin2018-02-161-9/+0
| | | | | | | | | The watchdog kill command was meant for busybox watchdog. Busybox watchdog was replaced by the procd watchdog mid 2013 with commit df7ce9301a25 ("busybox: disable the watchdog utility by default"), which makes the kill command obsolete since quite some time. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: populate boardname and model earlierMathias Kresin2017-07-151-0/+0
| | | | | | | | | | | | | For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me>
* adm5120: mark the rb1xx subtarget as brokenFelix Fietkau2017-01-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-191-2/+2
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: remove unused morse led trigger driverFelix Fietkau2016-08-041-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* adm5120: remove target specific /etc/config/systemJo-Philipp Wich2016-06-081-40/+0
| | | | | | | Now that deviations to the default /etc/config/system are registered via board.d we can drop the target specific copy. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* adm5120: convert LED setup to board.dJo-Philipp Wich2016-06-081-0/+17
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* image / basefiles: make console password configurableJohn Crispin2016-04-181-3/+3
| | | | | Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> Signed-off-by: John Crispin <john@phrozen.org>
* target: globally remove ARCH_PACKAGES overridesJo-Philipp Wich2016-04-173-3/+0
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* adm5120: lzma-loader: fix cache invalidationGabor Juhos2016-03-211-4/+4
| | | | | | | | | | | | | | | The current code only partially invalidates both caches because the cache size and cache-line size values are incorrectly passed to the C code. Fix the assembly code to pass the arguments in the correct order. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 49058
* adm5120: lzma-loader: remove trailing whitespaces from head.SGabor Juhos2016-03-211-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 49057
* adm5120: disable the openwrt commandline hackJonas Gorski2015-08-301-1/+0
| | | | | | | | We don't make use of it, so no need to have it enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46754
* adm5120: make patches apply againJonas Gorski2015-08-232-17/+17
| | | | | | | | Fix patches not applying anymore since r46654. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46714
* adm5120: do not config something as moduleHauke Mehrtens2015-07-141-38/+26
| | | | | | | | | | All modules should be build by a package and only selected by such a package. Remove all the config options selected as module and also refresh the config. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46372
* build: Prevent more gzip timestampsJohn Crispin2015-07-141-1/+1
| | | | | | | | | To improve reproducibility, prevent the inclusion of timestamps in the gzip header. Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 46361
* adm5120: fix subtarget dependency for kmod-pata-rb153-cfFelix Fietkau2015-05-281-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45798
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-212-10/+10
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* adm5120: drop 3.8 and 3.14 supportJohn Crispin2015-03-16228-29489/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44823
* adm5120: switch kernel to 3.18Rafał Miłecki2015-03-011-1/+2
| | | | | | | | Tested by Jonas on WP54g, thank you! Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44588
* adm5120: enable low_memRafał Miłecki2015-03-014-3/+4
| | | | | | | | | Most devices have only 16 MiB of RAM, this will allow them to boot without OOM. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44587
* kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configsJonas Gorski2015-03-012-2/+0
| | | | | | | | | Most MIPS targets have it disabled, so move the symbol to the generic configs to keep target configs small. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44583
* adm5120: use subtarget configs for all kernelsRafał Miłecki2015-03-012-0/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44581
* adm5120: add 3.18 supportRafał Miłecki2015-02-28115-0/+15082
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44580
* targets: base-files: diag.sh does not need to be executableLuka Perkov2015-02-071-0/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44305
* adm5120: add experimental 3.14 kernel supportFlorian Fainelli2015-01-10115-0/+15096
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43915
* adm5120: move files to files-3.8Florian Fainelli2015-01-1099-0/+0
| | | | | | | | In preparation for adding new kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 43914
* all targets: remove all =m kernel config symbolsFelix Fietkau2015-01-051-19/+0
| | | | | | | | | | | | modules build during the kernel compile phase are ignored anyway, all modules should be built using KernelPackage in package/kernel/linux/modules/* selecting the appropriate config symbols there rather than in target/linux/*/config-* Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43842
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047
* network: Unbind DHCPv6 from underlying interfacesSteven Barth2014-10-081-1/+1
| | | | | | | | | This allows IPv6 to set up without IPv4 being up thus IPv6-only or IPv6+DS-Lite working with the default config. Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 42848
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-101-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* kernel: remove obsolete yaffs options from target configsGabor Juhos2013-12-161-2/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39085
* targets: fix remaining targets for initramfs buildsFlorian Fainelli2013-06-281-2/+2
| | | | | | | | Fix some bugs that slipped through while making initramfs non exclusive. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37079
* targets: prepare for supporting normal and initramfs imagesFlorian Fainelli2013-06-271-8/+4
| | | | | | | | | | | | In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049
* base-files: input/button drivers get loaded before preinit by procdJohn Crispin2013-06-211-12/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000
* base-files: diag does not need to insmod any drivers, procd already did it ↵John Crispin2013-06-211-1/+0
| | | | | | | | for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999
* target: don't build jffs2 nor images by defaultJonas Gorski2013-06-052-2/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36863
* kernel: update linux 3.8 to 3.8.13Gabor Juhos2013-05-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724
* kernel: move CONFIG_MIPS_SEAD3 to genericJonas Gorski2013-05-121-1/+0
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617
* kernel: update linux 3.8 to 3.8.12Gabor Juhos2013-05-081-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576
* kernel: update linux 3.8 to 3.8.11Gabor Juhos2013-05-011-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507
* kernel: update linux 3.8 to 3.8.10Gabor Juhos2013-04-301-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493
* kernel: update linux 3.8 to 3.8.9Gabor Juhos2013-04-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453
* Change default IPv6 config to enable DHCPv6-PDSteven Barth2013-04-221-1/+1
| | | | SVN-Revision: 36384
* kernel: update linux 3.8 to 3.8.8Gabor Juhos2013-04-191-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 19:53:37 +0000