openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	bcm53xx: use upstream fix simplifying USB power GPIO usage	Rafał Miłecki	2016-07-07	1	-0/+34

From 134e06abd2d002edfdac3561656ab9e8161b29a3 Mon Sep 17 00:00:00 2001 From: Phil Elwell <phil@raspberrypi.com> Date: Fri, 31 Jan 2020 16:53:13 +0000 Subject: [PATCH] ARM: dts: Clean out downstream BCM2711/2838 files Signed-off-by: Phil Elwell <phil@raspberrypi.com> --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 157 ----- arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 - arch/arm/boot/dts/bcm2711.dtsi | 890 -------------------------- arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 - arch/arm/boot/dts/bcm2838.dtsi | 733 --------------------- 5 files changed, 1812 deletions(-) delete mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts delete mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi delete mode 100644 arch/arm/boot/dts/bcm2711.dtsi delete mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi delete mode 100644 arch/arm/boot/dts/bcm2838.dtsi --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -#include "bcm2711.dtsi" -#include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-peripheral.dtsi" - -/ { - compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; - model = "Raspberry Pi 4 Model B"; - - chosen { - /* 8250 auxiliary UART instead of pl011 */ - stdout-path = "serial1:115200n8"; - }; - - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0>; - }; - - aliases { - ethernet0 = &genet; - }; - - leds { - act { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - - pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - }; - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - - sd_io_1v8_reg: sd_io_1v8_reg { - compatible = "regulator-gpio"; - regulator-name = "vdd-sd-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-settling-time-us = <5000>; - gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - status = "okay"; - }; -}; - -&firmware { - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "BT_ON", - "WL_ON", - "PWR_LED_OFF", - "GLOBAL_RESET", - "VDD_SD_IO_SEL", - "CAM_GPIO", - "", - ""; - status = "okay"; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; - status = "okay"; -}; - -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* EMMC2 is used to drive the SD card */ -&emmc2 { - vqmmc-supply = <&sd_io_1v8_reg>; - broken-cd; - status = "okay"; -}; - -&genet { - phy-handle = <&phy1>; - phy-mode = "rgmii-rxid"; - status = "okay"; -}; - -&genet_mdio { - phy1: ethernet-phy@1 { - /* No PHY interrupt */ - reg = <0x1>; - }; -}; - -/* uart0 communicates with the BT module */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; -}; - -/* uart1 is mapped to the pin header */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_gpio14>; - status = "okay"; -}; - -&vchiq { - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; -}; - -/ { - __overrides__ { - act_led_gpio = <&act_led>,"gpios:4"; - act_led_activelow = <&act_led>,"gpios:8"; - act_led_trigger = <&act_led>,"linux,default-trigger"; - - pwr_led_gpio = <&pwr_led>,"gpios:4"; - pwr_led_activelow = <&pwr_led>,"gpios:8"; - pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; - - eth_led0 = <&phy1>,"led-modes:0"; - eth_led1 = <&phy1>,"led-modes:4"; - - sd_poll_once = <&emmc2>, "non-removable?"; - }; -}; --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi +++ /dev/null @@ -1,7 +0,0 @@ -#include "bcm2708-rpi.dtsi" -#include "bcm2838-rpi.dtsi" - -&v3d { - /* Undo the overwriting by bcm270x.dtsi */ - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -}; --- a/arch/arm/boot/dts/bcm2711.dtsi +++ /dev/null @@ -1,890 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "bcm283x.dtsi" - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/soc/bcm2835-pm.h> - -/ { - compatible = "brcm,bcm2711"; - - #address-cells = <2>; - #size-cells = <1>; - - interrupt-parent = <&gicv2>; - - reserved-memory { - #address-cells = <2>; - #size-cells = <1>; - ranges; - - /* - * arm64 reserves the CMA by default somewhere in ZONE_DMA32, - * that's not good enough for the BCM2711 as some devices can - * only address the lower 1G of memory (ZONE_DMA). - */ - linux,cma { - compatible = "shared-dma-pool"; - size = <0x2000000>; /* 32MB */ - alloc-ranges = <0x0 0x00000000 0x40000000>; - reusable; - linux,cma-default; - }; - }; - - - soc { - /* - * Defined ranges: - * Common BCM283x peripherals - * BCM2711-specific peripherals - * ARM-local peripherals - */ - ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, - <0x7c000000 0x0 0xfc000000 0x02000000>, - <0x40000000 0x0 0xff800000 0x00800000>; - /* Emulate a contiguous 30-bit address range for DMA */ - dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; - - /* - * This node is the provider for the enable-method for - * bringing up secondary cores. - */ - local_intc: local_intc@40000000 { - compatible = "brcm,bcm2836-l1-intc"; - reg = <0x40000000 0x100>; - }; - - gicv2: interrupt-controller@40041000 { - interrupt-controller; - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - reg = <0x40041000 0x1000>, - <0x40042000 0x2000>, - <0x40044000 0x2000>, - <0x40046000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xb00>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - /* DMA lite 7 - 10 */ - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x07f5>; - }; - - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>, - <0x7ec11000 0x20>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; - }; - - rng@7e104000 { - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - - /* RNG is incompatible with brcm,bcm2835-rng */ - status = "disabled"; - }; - - uart2: serial@7e201400 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7e201400 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart3: serial@7e201600 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7e201600 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart4: serial@7e201800 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7e201800 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart5: serial@7e201a00 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7e201a00 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - spi3: spi@7e204600 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204600 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@7e204800 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204800 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi5: spi@7e204a00 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204a00 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi6: spi@7e204c00 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204c00 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@7e205600 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - reg = <0x7e205600 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@7e205800 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - reg = <0x7e205800 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@7e205a00 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - reg = <0x7e205a00 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c6: i2c@7e205c00 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - reg = <0x7e205c00 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm1: pwm@7e20c800 { - compatible = "brcm,bcm2835-pwm"; - reg = <0x7e20c800 0x28>; - clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clock-rates = <10000000>; - #pwm-cells = <2>; - status = "disabled"; - }; - - emmc2: emmc2@7e340000 { - compatible = "brcm,bcm2711-emmc2"; - reg = <0x7e340000 0x100>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2711_CLOCK_EMMC2>; - status = "disabled"; - }; - - hvs@7e400000 { - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>; - /* This only applies to the ARMv7 stub */ - arm,cpu-registers-not-fw-configured; - }; - - cpus: cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000d8>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000e0>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000e8>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000f0>; - }; - }; - - scb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>; - - genet: ethernet@7d580000 { - compatible = "brcm,bcm2711-genet-v5"; - reg = <0x0 0x7d580000 0x10000>; - #address-cells = <0x1>; - #size-cells = <0x1>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - - genet_mdio: mdio@e14 { - compatible = "brcm,genet-mdio-v5"; - reg = <0xe14 0x8>; - reg-names = "mdio"; - #address-cells = <0x0>; - #size-cells = <0x1>; - }; - }; - }; -}; - -&clk_osc { - clock-frequency = <54000000>; -}; - -&clocks { - compatible = "brcm,bcm2711-cprman"; -}; - -&cpu_thermal { - coefficients = <(-487) 410040>; -}; - -&dsi0 { - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; -}; - -&dsi1 { - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio { - compatible = "brcm,bcm2711-gpio"; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - - gpclk0_gpio49: gpclk0_gpio49 { - pin-gpclk { - pins = "gpio49"; - function = "alt1"; - bias-disable; - }; - }; - gpclk1_gpio50: gpclk1_gpio50 { - pin-gpclk { - pins = "gpio50"; - function = "alt1"; - bias-disable; - }; - }; - gpclk2_gpio51: gpclk2_gpio51 { - pin-gpclk { - pins = "gpio51"; - function = "alt1"; - bias-disable; - }; - }; - - i2c0_gpio46: i2c0_gpio46 { - pin-sda { - function = "alt0"; - pins = "gpio46"; - bias-pull-up; - }; - pin-scl { - function = "alt0"; - pins = "gpio47"; - bias-disable; - }; - }; - i2c1_gpio46: i2c1_gpio46 { - pin-sda { - function = "alt1"; - pins = "gpio46"; - bias-pull-up; - }; - pin-scl { - function = "alt1"; - pins = "gpio47"; - bias-disable; - }; - }; - i2c3_gpio2: i2c3_gpio2 { - pin-sda { - function = "alt5"; - pins = "gpio2"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio3"; - bias-disable; - }; - }; - i2c3_gpio4: i2c3_gpio4 { - pin-sda { - function = "alt5"; - pins = "gpio4"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio5"; - bias-disable; - }; - }; - i2c4_gpio6: i2c4_gpio6 { - pin-sda { - function = "alt5"; - pins = "gpio6"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio7"; - bias-disable; - }; - }; - i2c4_gpio8: i2c4_gpio8 { - pin-sda { - function = "alt5"; - pins = "gpio8"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio9"; - bias-disable; - }; - }; - i2c5_gpio10: i2c5_gpio10 { - pin-sda { - function = "alt5"; - pins = "gpio10"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio11"; - bias-disable; - }; - }; - i2c5_gpio12: i2c5_gpio12 { - pin-sda { - function = "alt5"; - pins = "gpio12"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio13"; - bias-disable; - }; - }; - i2c6_gpio0: i2c6_gpio0 { - pin-sda { - function = "alt5"; - pins = "gpio0"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio1"; - bias-disable; - }; - }; - i2c6_gpio22: i2c6_gpio22 { - pin-sda { - function = "alt5"; - pins = "gpio22"; - bias-pull-up; - }; - pin-scl { - function = "alt5"; - pins = "gpio23"; - bias-disable; - }; - }; - i2c_slave_gpio8: i2c_slave_gpio8 { - pins-i2c-slave { - pins = "gpio8", - "gpio9", - "gpio10", - "gpio11"; - function = "alt3"; - }; - }; - - jtag_gpio48: jtag_gpio48 { - pins-jtag { - pins = "gpio48", - "gpio49", - "gpio50", - "gpio51", - "gpio52", - "gpio53"; - function = "alt4"; - }; - }; - - mii_gpio28: mii_gpio28 { - pins-mii { - pins = "gpio28", - "gpio29", - "gpio30", - "gpio31"; - function = "alt4"; - }; - }; - mii_gpio36: mii_gpio36 { - pins-mii { - pins = "gpio36", - "gpio37", - "gpio38", - "gpio39"; - function = "alt5"; - }; - }; - - pcm_gpio50: pcm_gpio50 { - pins-pcm { - pins = "gpio50", - "gpio51", - "gpio52", - "gpio53"; - function = "alt2"; - }; - }; - - pwm0_0_gpio12: pwm0_0_gpio12 { - pin-pwm { - pins = "gpio12"; - function = "alt0"; - bias-disable; - }; - }; - pwm0_0_gpio18: pwm0_0_gpio18 { - pin-pwm { - pins = "gpio18"; - function = "alt5"; - bias-disable; - }; - }; - pwm1_0_gpio40: pwm1_0_gpio40 { - pin-pwm { - pins = "gpio40"; - function = "alt0"; - bias-disable; - }; - }; - pwm0_1_gpio13: pwm0_1_gpio13 { - pin-pwm { - pins = "gpio13"; - function = "alt0"; - bias-disable; - }; - }; - pwm0_1_gpio19: pwm0_1_gpio19 { - pin-pwm { - pins = "gpio19"; - function = "alt5"; - bias-disable; - }; - }; - pwm1_1_gpio41: pwm1_1_gpio41 { - pin-pwm { - pins = "gpio41"; - function = "alt0"; - bias-disable; - }; - }; - pwm0_1_gpio45: pwm0_1_gpio45 { - pin-pwm { - pins = "gpio45"; - function = "alt0"; - bias-disable; - }; - }; - pwm0_0_gpio52: pwm0_0_gpio52 { - pin-pwm { - pins = "gpio52"; - function = "alt1"; - bias-disable; - }; - }; - pwm0_1_gpio53: pwm0_1_gpio53 { - pin-pwm { - pins = "gpio53"; - function = "alt1"; - bias-disable; - }; - }; - - rgmii_gpio35: rgmii_gpio35 { - pin-start-stop { - pins = "gpio35"; - function = "alt4"; - }; - pin-rx-ok { - pins = "gpio36"; - function = "alt4"; - }; - }; - rgmii_irq_gpio34: rgmii_irq_gpio34 { - pin-irq { - pins = "gpio34"; - function = "alt5"; - }; - }; - rgmii_irq_gpio39: rgmii_irq_gpio39 { - pin-irq { - pins = "gpio39"; - function = "alt4"; - }; - }; - rgmii_mdio_gpio28: rgmii_mdio_gpio28 { - pins-mdio { - pins = "gpio28", - "gpio29"; - function = "alt5"; - }; - }; - rgmii_mdio_gpio37: rgmii_mdio_gpio37 { - pins-mdio { - pins = "gpio37", - "gpio38"; - function = "alt4"; - }; - }; - - spi0_gpio46: spi0_gpio46 { - pins-spi { - pins = "gpio46", - "gpio47", - "gpio48", - "gpio49"; - function = "alt2"; - }; - }; - spi2_gpio46: spi2_gpio46 { - pins-spi { - pins = "gpio46", - "gpio47", - "gpio48", - "gpio49", - "gpio50"; - function = "alt5"; - }; - }; - spi3_gpio0: spi3_gpio0 { - pins-spi { - pins = "gpio0", - "gpio1", - "gpio2", - "gpio3"; - function = "alt3"; - }; - }; - spi4_gpio4: spi4_gpio4 { - pins-spi { - pins = "gpio4", - "gpio5", - "gpio6", - "gpio7"; - function = "alt3"; - }; - }; - spi5_gpio12: spi5_gpio12 { - pins-spi { - pins = "gpio12", - "gpio13", - "gpio14", - "gpio15"; - function = "alt3"; - }; - }; - spi6_gpio18: spi6_gpio18 { - pins-spi { - pins = "gpio18", - "gpio19", - "gpio20", - "gpio21"; - function = "alt3"; - }; - }; - - uart2_gpio0: uart2_gpio0 { - pin-tx { - pins = "gpio0"; - function = "alt4"; - bias-disable; - }; - pin-rx { - pins = "gpio1"; - function = "alt4"; - bias-pull-up; - }; - }; - uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { - pin-cts { - pins = "gpio2"; - function = "alt4"; - bias-pull-up; - }; - pin-rts { - pins = "gpio3"; - function = "alt4"; - bias-disable; - }; - }; - uart3_gpio4: uart3_gpio4 { - pin-tx { - pins = "gpio4"; - function = "alt4"; - bias-disable; - }; - pin-rx { - pins = "gpio5"; - function = "alt4"; - bias-pull-up; - }; - }; - uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { - pin-cts { - pins = "gpio6"; - function = "alt4"; - bias-pull-up; - }; - pin-rts { - pins = "gpio7"; - function = "alt4"; - bias-disable; - }; - }; - uart4_gpio8: uart4_gpio8 { - pin-tx { - pins = "gpio8"; - function = "alt4"; - bias-disable; - }; - pin-rx { - pins = "gpio9"; - function = "alt4"; - bias-pull-up; - }; - }; - uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { - pin-cts { - pins = "gpio10"; - function = "alt4"; - bias-pull-up; - }; - pin-rts { - pins = "gpio11"; - function = "alt4"; - bias-disable; - }; - }; - uart5_gpio12: uart5_gpio12 { - pin-tx { - pins = "gpio12"; - function = "alt4"; - bias-disable; - }; - pin-rx { - pins = "gpio13"; - function = "alt4"; - bias-pull-up; - }; - }; - uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { - pin-cts { - pins = "gpio14"; - function = "alt4"; - bias-pull-up; - }; - pin-rts { - pins = "gpio15"; - function = "alt4"; - bias-disable; - }; - }; -}; - -&i2c0 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c1 { - compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -}; - -&mailbox { - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; -}; - -&sdhci { - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -}; - -&sdhost { - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; -}; - -&spi { - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -}; - -&spi1 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&spi2 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&system_timer { - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; -}; - -&txp { - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart0 { - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart1 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usb { - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; -}; - -&vec { - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; -}; --- a/arch/arm/boot/dts/bcm2838-rpi.dtsi +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -/ { - soc { - /delete-node/ mailbox@7e00b840; - }; -}; - -&scb { - vchiq: mailbox@7e00b840 { - compatible = "brcm,bcm2838-vchiq"; - reg = <0 0x7e00b840 0x3c>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&dma { - /* The VPU firmware uses DMA channel 11 for VCHIQ */ - brcm,dma-channel-mask = <0x1f5>; -}; - -&dma40 { - /* The VPU firmware DMA channel 11 for VCHIQ */ - brcm,dma-channel-mask = <0x7000>; -}; --- a/arch/arm/boot/dts/bcm2838.dtsi +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "bcm283x.dtsi" - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/soc/bcm2835-pm.h> - -/ { - compatible = "brcm,bcm2838"; - - #address-cells = <2>; - #size-cells = <1>; - - interrupt-parent = <&gicv2>; - - soc { - ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, - <0x7c000000 0x0 0xfc000000 0x02000000>, - <0x40000000 0x0 0xff800000 0x00800000>; - /* Emulate a contiguous 30-bit address range for DMA */ - dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; - - /delete-node/ interrupt-controller@7e00f300; - /delete-node/ v3d@7ec00000; - - local_intc: local_intc@40000000 { - compatible = "brcm,bcm2836-l1-intc"; - reg = <0x40000000 0x100>; - }; - - gicv2: interrupt-controller@40041000 { - interrupt-controller; - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - reg = <0x40041000 0x1000>, - <0x40042000 0x2000>, - <0x40044000 0x2000>, - <0x40046000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - - thermal: thermal@7d5d2200 { - compatible = "brcm,avs-tmon-bcm2838"; - reg = <0x7d5d2200 0x2c>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tmon"; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; - status = "okay"; - }; - - pm: watchdog@7e100000 { - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>, - <0x7ec11000 0x20>; - }; - - rng@7e104000 { - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - }; - - uart2: serial@7e201400 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201400 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart3: serial@7e201600 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201600 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart4: serial@7e201800 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201800 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart5: serial@7e201a00 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201a00 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - spi@7e204000 { - reg = <0x7e204000 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - }; - - spi3: spi@7e204600 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204600 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@7e204800 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204800 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi5: spi@7e204a00 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204a00 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi6: spi@7e204c00 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204c00 0x0200>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@7e205600 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205600 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@7e205800 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205800 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@7e205a00 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205a00 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c6: i2c@7e205c00 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205c00 0x200>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm1: pwm@7e20c800 { - compatible = "brcm,bcm2835-pwm"; - reg = <0x7e20c800 0x28>; - clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clock-rates = <10000000>; - #pwm-cells = <2>; - status = "disabled"; - }; - - emmc2: emmc2@7e340000 { - compatible = "brcm,bcm2711-emmc2"; - status = "okay"; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clocks BCM2711_CLOCK_EMMC2>; - reg = <0x7e340000 0x100>; - }; - - hvs@7e400000 { - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a72-pmu"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - cpus: cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000d8>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000e0>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000e8>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x000000f0>; - }; - }; - - v3dbus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <2>; - ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>, - <0x40000000 0x0 0xff800000 0x0 0x00800000>; - dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>; - - v3d: v3d@7ec04000 { - compatible = "brcm,2711-v3d"; - reg = - <0x7ec00000 0x0 0x4000>, - <0x7ec04000 0x0 0x4000>; - reg-names = "hub", "core0"; - - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; - resets = <&pm BCM2835_RESET_V3D>; - clocks = <&clocks BCM2835_CLOCK_V3D>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - status = "okay"; - }; - }; - - scb: scb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, - <0x0 0x40000000 0x0 0xff800000 0x00800000>, - <0x6 0x00000000 0x6 0x00000000 0x40000000>, - <0x0 0x00000000 0x0 0x00000000 0xfc000000>; - dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>; - - pcie_0: pcie@7d500000 { - reg = <0x0 0x7d500000 0x9310>, - <0x0 0x7e00f300 0x20>; - msi-controller; - msi-parent = <&pcie_0>; - #address-cells = <3>; - #interrupt-cells = <1>; - #size-cells = <2>; - bus-range = <0x0 0x01>; - compatible = "brcm,bcm2711b0-pcie", // Safe value - "brcm,bcm2711-pcie", - "brcm,pci-plat-dev"; - max-link-speed = <2>; - tot-num-pcie = <1>; - linux,pci-domain = <0>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie", "msi"; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 - IRQ_TYPE_LEVEL_HIGH - 0 0 0 2 &gicv2 GIC_SPI 144 - IRQ_TYPE_LEVEL_HIGH - 0 0 0 3 &gicv2 GIC_SPI 145 - IRQ_TYPE_LEVEL_HIGH - 0 0 0 4 &gicv2 GIC_SPI 146 - IRQ_TYPE_LEVEL_HIGH>; - - /* Map outbound accesses from scb:0x6_00000000-03ffffff - * to pci:0x0_f8000000-fbffffff - */ - ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 - 0x0 0x04000000>; - /* Map inbound accesses from pci:0x0_00000000..ffffffff - * to scb:0x0_00000000-ffffffff - */ - dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 - 0x1 0x00000000>; - status = "okay"; - }; - - genet: ethernet@7d580000 { - compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5"; - reg = <0x0 0x7d580000 0x10000>; - #address-cells = <0x1>; - #size-cells = <0x1>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - - genet_mdio: mdio@e14 { - #address-cells = <0x0>; - #size-cells = <0x1>; - compatible = "brcm,genet-mdio-v5"; - reg = <0xe14 0x8>; - reg-names = "mdio"; - }; - }; - - dma40: dma@7e007b00 { - compatible = "brcm,bcm2838-dma"; - reg = <0x0 0x7e007b00 0x400>; - interrupts = - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */ - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */ - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */ - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */ - interrupt-names = "dma11", - "dma12", - "dma13", - "dma14"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7800>; - }; - /* DMA4 - 40 bit DMA engines */ - - xhci: xhci@7e9c0000 { - compatible = "generic-xhci"; - status = "disabled"; - reg = <0x0 0x7e9c0000 0x100000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - }; - - hevc-decoder@7eb00000 { - compatible = "raspberrypi,rpivid-hevc-decoder"; - reg = <0x0 0x7eb00000 0x10000>; - status = "okay"; - }; - - rpivid-local-intc@7eb10000 { - compatible = "raspberrypi,rpivid-local-intc"; - reg = <0x0 0x7eb10000 0x1000>; - status = "okay"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - }; - - h264-decoder@7eb20000 { - compatible = "raspberrypi,rpivid-h264-decoder"; - reg = <0x0 0x7eb20000 0x10000>; - status = "okay"; - }; - - vp9-decoder@7eb30000 { - compatible = "raspberrypi,rpivid-vp9-decoder"; - reg = <0x0 0x7eb30000 0x10000>; - status = "okay"; - }; - }; -}; - -&clk_osc { - clock-frequency = <54000000>; -}; - -&clocks { - compatible = "brcm,bcm2711-cprman"; -}; - -&cpu_thermal { - coefficients = <(-487) 410040>; -}; - -&dsi0 { - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; -}; - -&dsi1 { - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio { - compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio"; - - gpclk0_gpio49: gpclk0_gpio49 { - brcm,pins = <49>; - brcm,function = <BCM2835_FSEL_ALT1>; - brcm,pull = <BCM2835_PUD_OFF>; - }; - gpclk1_gpio50: gpclk1_gpio50 { - brcm,pins = <50>; - brcm,function = <BCM2835_FSEL_ALT1>; - brcm,pull = <BCM2835_PUD_OFF>; - }; - gpclk2_gpio51: gpclk2_gpio51 { - brcm,pins = <51>; - brcm,function = <BCM2835_FSEL_ALT1>; - brcm,pull = <BCM2835_PUD_OFF>; - }; - - i2c0_gpio46: i2c0_gpio46 { - brcm,pins = <46 47>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - i2c1_gpio46: i2c1_gpio46 { - brcm,pins = <46 47>; - brcm,function = <BCM2835_FSEL_ALT1>; - }; - i2c3_gpio2: i2c3_gpio2 { - brcm,pins = <2 3>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c3_gpio4: i2c3_gpio4 { - brcm,pins = <4 5>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c4_gpio6: i2c4_gpio6 { - brcm,pins = <6 7>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c4_gpio8: i2c4_gpio8 { - brcm,pins = <8 9>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c5_gpio10: i2c5_gpio10 { - brcm,pins = <10 11>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c5_gpio12: i2c5_gpio12 { - brcm,pins = <12 13>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c6_gpio0: i2c6_gpio0 { - brcm,pins = <0 1>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c6_gpio22: i2c6_gpio22 { - brcm,pins = <22 23>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - i2c_slave_gpio8: i2c_slave_gpio8 { - brcm,pins = <8 9 10 11>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - - jtag_gpio48: jtag_gpio48 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - - mii_gpio28: mii_gpio28 { - brcm,pins = <28 29 30 31>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - mii_gpio36: mii_gpio36 { - brcm,pins = <36 37 38 39>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - - pcm_gpio50: pcm_gpio50 { - brcm,pins = <50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - - pwm0_gpio52: pwm0_gpio52 { - brcm,pins = <52>; - brcm,function = <BCM2835_FSEL_ALT1>; - brcm,pull = <BCM2835_PUD_OFF>; - }; - pwm1_gpio53: pwm1_gpio53 { - brcm,pins = <53>; - brcm,function = <BCM2835_FSEL_ALT1>; - brcm,pull = <BCM2835_PUD_OFF>; - }; - - /* The following group consists of: - * RGMII_START_STOP - * RGMII_RX_OK - */ - rgmii_gpio35: rgmii_gpio35 { - brcm,pins = <35 36>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - rgmii_irq_gpio34: rgmii_irq_gpio34 { - brcm,pins = <34>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - rgmii_irq_gpio39: rgmii_irq_gpio39 { - brcm,pins = <39>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - rgmii_mdio_gpio28: rgmii_mdio_gpio28 { - brcm,pins = <28 29>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - rgmii_mdio_gpio37: rgmii_mdio_gpio37 { - brcm,pins = <37 38>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - - spi0_gpio46: spi0_gpio46 { - brcm,pins = <46 47 48 49>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - spi2_gpio46: spi2_gpio46 { - brcm,pins = <46 47 48 49 50>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - spi3_gpio0: spi3_gpio0 { - brcm,pins = <0 1 2 3>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - spi4_gpio4: spi4_gpio4 { - brcm,pins = <4 5 6 7>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - spi5_gpio12: spi5_gpio12 { - brcm,pins = <12 13 14 15>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - spi6_gpio18: spi6_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - - uart2_gpio0: uart2_gpio0 { - brcm,pins = <0 1>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; - }; - uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { - brcm,pins = <2 3>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; - }; - uart3_gpio4: uart3_gpio4 { - brcm,pins = <4 5>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; - }; - uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { - brcm,pins = <6 7>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; - }; - uart4_gpio8: uart4_gpio8 { - brcm,pins = <8 9>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; - }; - uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { - brcm,pins = <10 11>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; - }; - uart5_gpio12: uart5_gpio12 { - brcm,pins = <12 13>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; - }; - uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { - brcm,pins = <14 15>; - brcm,function = <BCM2835_FSEL_ALT4>; - brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; - }; -}; - -&vec { - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usb { - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; -}; - -&hdmi { - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart1 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&spi1 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&spi2 { - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -}; - -&csi0 { - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; -}; - -&csi1 { - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; -}; - -&sdhci { - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c0 { - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c1 { - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c2 { - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio { - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; -}; - -&mailbox { - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; -}; - -&rng { - compatible = "brcm,bcm2711-rng200", "brcm,bcm2838-rng200"; -}; - -&sdhost { - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; -}; - -&system_timer { - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart0 { - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -}; - -&dma { - reg = <0x7e007000 0xb00>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */ - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */ - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */ - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */ - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10"; - brcm,dma-channel-mask = <0x07f5>; -}; - -&txp { - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; -};