aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm63xx/patches-5.4
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.67John Audia2020-09-241-1/+1
| | | | | | | | | | | | | | All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x, lantiq/xrx200 and ath79/generic Run-tested: ipq806x (R7800), lantiq (Easybox 904 xDSL) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add test on lantiq] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.58John Audia2020-08-183-98/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
* bcm63xx: reorganize board patchesAdrian Schmutzler2020-08-1669-245/+245
| | | | | | | | | | This renames board patches to make finding devices easier and reorders them based on their board. The devices are grouped based on the board/cpu_id. New device patches should be numbered based on their group. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: switch to upstream CFE detection patchÁlvaro Fernández Rojas2020-08-113-71/+78
| | | | | | This patch has been merged in linux 5.9. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add missing endif board comnentsÁlvaro Fernández Rojas2020-08-0761-118/+118
| | | | | | This provides better context for board patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: merge RTA770BW and RTA770W board patchesÁlvaro Fernández Rojas2020-08-0738-143/+101
| | | | | | The only difference between both boards is the DSL annex. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add missing fallback SPROMsÁlvaro Fernández Rojas2020-08-0717-50/+56
| | | | | | A couple of SPROM IDs are missing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add missing OHCI nodesÁlvaro Fernández Rojas2020-08-0733-99/+102
| | | | | | All boards with EHCI enabled should also have OHCI enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: remove invalid EHCI nodesÁlvaro Fernández Rojas2020-08-0760-160/+158
| | | | | | There's no EHCI controller on BCM6348. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: refactor board patchesÁlvaro Fernández Rojas2020-08-0769-1483/+1401
| | | | | | | Current board patches format is crazy. Let's try to put some order. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to upstream CFE version detection patchÁlvaro Fernández Rojas2020-08-067-32/+61
| | | | | | The patch improving CFE version detection has been merged (linux 5.9). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to upstream endif comments patchÁlvaro Fernández Rojas2020-08-0686-354/+451
| | | | | | | This allows better context for board patches and we no longer need a downstream patch for that. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to upstream LED patchÁlvaro Fernández Rojas2020-08-061-44/+95
| | | | | | | The patch adding support for the second LED HW blinking interval has been merged (linux 5.9). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: Update kernel 5.4 to version 5.4.50Hauke Mehrtens2020-07-041-1/+1
| | | | | | | Run tested: ath79, ipq40xx Build tested: ath79, ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.48Petr Štetiar2020-06-221-40/+0
| | | | | | | | | | | | | | | | Resolved merge conflict in the following patches: layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch Refreshed patches, removed upstreamed patch: bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch Run tested: qemu-x86-64 Build tested: x86/64 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm63xx: switch to upstream NAND patchesÁlvaro Fernández Rojas2020-06-119-35/+191
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: bcm6328: switch to upstream boot sel patchÁlvaro Fernández Rojas2020-06-072-13/+30
| | | | | | BCM6328 boot selection fix has been upstreamed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add support for the Sercomm H500-sDaniel González Cabanelas2020-06-071-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sercomm H500-s is an xDSL dual band wireless router based on Broadcom BCM63167 SoC. Hardware: SoC: Broadcom BCM63167 CPU: BMIPS4350 V8.0, 400 MHz, 2 cores Flash: NAND 128 MiB RAM: DDR3 128 MiB Ethernet: 4x 10/100/1000 Mbps Switch: BCM53134S Wireless: 802.11b/g/n: BCM435f (integrated) 802.11ac: Quantenna QT3740BC (onboard SoC) USB: 1x 2.0 LEDs/Buttons: 11x / 2x Flash instruction, web UI: 1. Reset to defaults using the reset button if the admin password is unknown 2. Login into the web UI as admin. Address: http://192.168.0.1 User: admin Password: VF-ESVodafone-H-500-s or l033i-h500s 3. Go to Settings -> Firmware Update, and select the Openwrt factory firmware 4. Update the firmware. 5. Wait until it finish, the device will reboot with Openwrt installed on the alternative image partitions keeping the stock firmware in the former. Notes: - The patch also adds support for the lowi version. Only the factory firmware is different. - The integrated Wifi in the Broadcom Soc isn't still supported. - The Quantenna 802.11ac wifi works ok, but needs to be configured with the Quantenna client application. It can't be configured with Luci nor any iw command since it's a separated subsystem linked via ethernet. - The BCM53134S external switch is managed via MDIO which isn't supported in this target. Therefore it will behave as a dumb switch. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bcm63xx: kernel: add BCM63167 cpuid variantDaniel González Cabanelas2020-06-073-24/+28
| | | | | | | | | The BCM63167 is a BCM63268 SoC with a different physical packaging. Add the CPU ID to allow supporting routers with this SoC (i.e Sercomm H500-s) Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* brcm63xx: add support for ADB P.DG A4001N A-000-1A1-AXDaniele Castro2020-05-221-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ADB P.DG A4001N A-000-1A1-AX a.k.a. Telecom Italia ADSL2+ Wi-Fi N (AGPWI) has the same PCB as the OpenWrt's ADB P.DG A4001N1 with LEDs connected to different GPIO PINs in active low configuration. OpenWrt's ADB P.DG A4001N image is made for the ADB P.DG A4001N A-000-1A1-AE. It has different LEDs configuration and flash size/layout w.r.t the ADB P.DG A4001N A-000-1A1-AX. Hardware: * Board ID: 96328avng * SoC: Broadcom BCM6328 * RAM DDR2-800: 32 Mbyte - winbond W9725G6KB-25 * Serial flash: 16 Mbyte - MXIC MX25L 12845EMI-10G * Ethernet: 4x Ethernet 10/100 baseT * Wifi 2.4GHz: Broadcom Corporation BCM43224/5 Wireless Network Adapter (rev 01) * LEDs: 2x Power, 2x ADSL, 2x Internet, 2x Wi-Fi, 2x Service * Buttons: 1x Reset, 1x WPS (named WiFi/LED) * UART: 1x TTL 115200n8, TX NC RX, on J5 connector (short R192 and R193) NC GND NC Installation via CFE: * Stock CFE has to be overwriten with one for 96328avng boards that can upload .bin images with no signature check (cfe-A4001N-V0000_96328avng.bin) * connect a serial port to the board * Stop the boot process after power on by pressing enter * set static IP 192.168.1.2 and subnet mask 255.255.255.0 * navigate to http://192.168.1.1/ * upload the OpenWrt image file Signed-off-by: Daniele Castro <danielecastro@hotmail.it> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: WIP: add Huawei HG253s v2 supportÁlvaro Fernández Rojas2020-05-211-0/+56
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: improve rgmii ctrl overridesÁlvaro Fernández Rojas2020-05-2127-60/+84
| | | | | | | There are older devices which require overriding the RGMII ports, so this shouldn't be limited and forced to BCM63268. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: nand: fix v2.1 controller supportÁlvaro Fernández Rojas2020-05-211-8/+40
| | | | | | Page size shift is different from v2.2+ controllers Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add unmodded SERCOMM AD1018 supportÁlvaro Fernández Rojas2020-05-195-5/+6
| | | | | | | | | Until now only HW modded SPI flash version was supported. BCM6328 with 64M RAM and 128M NAND. More info: https://openwrt.org/toh/sercomm/ad1018 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: bcm6328: fix strapbus boot selÁlvaro Fernández Rojas2020-05-192-1/+14
| | | | | | Boot selection bit is 18, not 28. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: reorganize board patchesÁlvaro Fernández Rojas2020-05-1949-0/+0
| | | | | | Let's put some order on board patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: bcm6328-leds: improve HW blinkingÁlvaro Fernández Rojas2020-05-191-0/+137
| | | | | | Add support for second HW blinking interval. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add Comtrend VG-8050 supportÁlvaro Fernández Rojas2020-05-191-0/+48
| | | | | | | | BCM63169 with 128M RAM, 128M NAND and BCM53125 switch. Switch is connected by HSSPI to CS5. More info: https://openwrt.org/toh/comtrend/vg8050 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add NETGEAR DGND3700v2 supportÁlvaro Fernández Rojas2020-05-191-0/+50
| | | | | | | | BCM6362 with 64M RAM, 32M NAND and BCM53125 switch. Switch is connected by MMAP, which is currently unsupported (no VLANs). More info: https://openwrt.org/toh/netgear/dgnd3700v2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add support for Comtrend VR-3032uÁlvaro Fernández Rojas2020-05-181-0/+63
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: smp: add NAND supportÁlvaro Fernández Rojas2020-05-1813-1/+557
| | | | | | NAND controller is present on BCM6328, BCM6362, BCM6368 and BCM63268. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: mask interrupts on initÁlvaro Fernández Rojas2020-05-171-0/+12
| | | | | | | Fixes BCM6348/BCM6358 hangs while booting: https://bugs.openwrt.org/index.php?do=details&task_id=2202 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: periph_intc: report effective affinityDaniel Gonzalez Cabanelas2020-05-141-0/+20
| | | | | | | | | | | The bcm6345-periph-intc driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. This patch gets rid of the kernel message: "genirq: irq_chip bcm6345-periph-intc did not update eff. affinity mask of irq 52" Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* bcm63xx: ext_intc: fix warningÁlvaro Fernández Rojas2020-05-141-0/+28
| | | | | | | | | | | | | | | | | In file included from ./arch/mips/include/asm/io.h:34, from ./arch/mips/include/asm/mmiowb.h:5, from ./include/linux/spinlock.h:60, from ./include/linux/irq.h:14, from drivers/irqchip/irq-bcm6345-ext.c:10: drivers/irqchip/irq-bcm6345-ext.c: In function 'bcm6345_ext_intc_of_init': ./arch/mips/include/asm/mach-bcm63xx/ioremap.h:48:9: warning: 'base' may be used uninitialized in this function [-Wmaybe-uninitialized] return is_bcm63xx_internal_registers((unsigned long)addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-bcm6345-ext.c:255:16: note: 'base' was declared here void __iomem *base; ^~~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: periph_intc: fix warningÁlvaro Fernández Rojas2020-05-141-0/+20
| | | | | | | | | drivers/irqchip/irq-bcm6345-periph.c: In function 'bcm6345_periph_irq_handle': drivers/irqchip/irq-bcm6345-periph.c:55:21: warning: 'block' may be used uninitialized in this function [-Wmaybe-uninitialized] struct intc_block *block; ^~~~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: redboot: fix warningÁlvaro Fernández Rojas2020-05-141-1/+1
| | | | | | | | | drivers/mtd/parsers/redboot.c: In function 'parse_redboot_partitions': drivers/mtd/parsers/redboot.c:194:59: warning: suggest parentheses around '-' in operand of '&' [-Wparentheses] fis_origin = (buf[i].flash_base & (master->size << 1) - 1); ~~~~~~~~~~~~~~~~~~~~^~~ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: bcm6362: fix pinctrl bugÁlvaro Fernández Rojas2020-05-141-0/+11
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: 5.4: fix compilation for changed driver_find_deviceAdrian Schmutzler2020-04-121-1/+5
| | | | | | | | | In kernel patch 92ce7e83b4e5 ("driver_find_device: Unify the match function with class_find_device()") the arguments of functions used with driver_find_device are adjusted. Do the same for our local user. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: 5.4: add removed helper syscon_regmap_lookup_by_pdevnameAdrian Schmutzler2020-04-121-0/+64
| | | | | | | | | | | The helper syscon_regmap_lookup_by_pdevname has been removed in kernel patch 29d14b668d2f ("mfd: Remove unused helper syscon_regmap_lookup_by_pdevname") due to lack of users. However, we use this function in our local pinctrl drivers for BCM6358 and BCM6368. Thus, we have to add it locally. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: prevent fall-through in kernel patches for 5.4Adrian Schmutzler2020-04-124-8/+11
| | | | | | | | | | | | | | | | | | | | | In kernel 5.4 -Werror=implicit-fallthrough is treated as error: arch/mips/bcm63xx/cpu.c: In function 'detect_cpu_clock': arch/mips/bcm63xx/cpu.c:158:2: error: this statement may fall through [-Werror=implicit-fallthrough=] { ^ arch/mips/bcm63xx/cpu.c:179:2: note: here case BCM6328_CPU_ID: ^~~~ cc1: all warnings being treated as errors This can be fixed by adding "Fall through" as a comment where intended, and has to be fixed by returning a proper default otherwise. In case of the default clock frequency for BCM6318 we fixed this by returning the default value taken from BCM6328 and BCM6362. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: refresh patches for kernel 5.4Adrian Schmutzler2020-04-1239-718/+143
| | | | | | | | Refresh patches to make them apply to kernel 5.4. The removed patches have been merged upstream. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: copy files to kernel 5.4Adrian Schmutzler2020-04-12176-0/+21702
Copy config and patches to kernel 5.4. make kernel_oldconfig has been run on 4.19 beforehand. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:10:56 +0000