aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-5.15
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.15 to 5.15.68John Audia2022-09-174-5/+5
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* ath79: Make patches apply againHauke Mehrtens2022-09-112-2/+2
| | | | | | | | The patch adding support for LEDs connected to a reset controller did not apply any more, refresh it on top of current master. Fixes: 53fc987b2552 ("generic: move ledbar driver from mediatek target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add and enable MGLRU for Linux 5.15Rui Salvaterra2022-09-1110-0/+5175
| | | | | | | Backport a preliminary version of Yu Zhao's multi-generational LRU, for improved memory management. Refresh the patches while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: backport MediaTek USB Bluetooth additionsDaniel Golle2022-09-091-0/+71
| | | | | | | Backport commits from linux.git adding support for various MT7921 Bluetooth USB IDs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.15 to 5.15.67John Audia2022-09-094-8/+8
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: mt7530: add support for in-band managed linkDaniel Golle2022-09-091-0/+123
| | | | | | | Add support for in-band managed link status to support SFP cage connected to port 5 of the MT7531 switch on the Bananapi BPi-R3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mtk_sgmii: re-organize PCS link status reportingDaniel Golle2022-09-091-4/+6
| | | | | | Don't report speed in case link is down. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mtk_eth_soc: fix hw hash reporting for MT7986Daniel Golle2022-09-071-3/+3
| | | | | | Import patch from Linux 6.0. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: refresh patchesDaniel Golle2022-09-072-17/+8
| | | | | | | The introduction of the new Airoha target has left the tree in an unfresh state. Refresh patches to improve that situation. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add support for HALNy HL-GSFP and other related fixesJosef Schlehofer2022-09-066-0/+605
| | | | | | | | | | | | It was reported on Turris forum [1] that HALNy HL-GSFP module does not work as it should with kernel 5.15. Russell King prepared this patch series, which fixes broken SFP module to work. Compile and run tested with Turris Omnia. [1] https://forum.turris.cz/t/hbl-turrisos-6-0-alpha2-halny-hl-gsfp-sfp-gpon-stick-problems/17547 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: fix mvneta Ethernet after generic phylink validateDaniel Golle2022-09-051-1/+1
| | | | | | | | Import patches from Linux v5.16 and v5.17 to get 2500Base-X SFP working again with mvneta driver after the generic phylink validate backport. Fixes: aab466f422 ("kernel: backport generic phylink validate") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* airoha: Add new target platformDaniel Danzberger2022-09-051-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* kernel: bump 5.15 to 5.15.64John Audia2022-09-021-1/+1
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: add pending mtk_sgmii and phy improvements from @lynxisDaniel Golle2022-08-3010-0/+467
| | | | | | | | | | | | | Add pending patches from Alexander 'lynxis' Couzens which are required for RealTek NBase-T PHYs or SFP+ cages to work when connected to the SGMII interface provided by recent MediaTek SoCs [1]. The patches for MT753x fix link speed limitation on CPU ports observed by many users which is due to reset being carried out wrongly [2]. [1]: https://patchwork.kernel.org/project/netdevbpf/list/?series=669488&state=* [2]: https://patchwork.kernel.org/project/netdevbpf/list/?series=669486&state=* Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport generic phylink validateDaniel Golle2022-08-302-5/+5
| | | | | | | Backport generic phylink validate series and make use of it for mtk_eth_soc Ethernet driver as well as mt7530 DSA driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: replace downstream get_mtd_device_by_node() implementationRafał Miłecki2022-08-282-76/+1
| | | | | | | | | | | | | | Use upstream of_get_mtd_device_by_node() which should behave pretty much the same. Implementation differences: get_mtd_device_by_node() of_get_mtd_device_by_node() ---- ---- np->dev.of_node mtd_get_of_node(np) -EPROBE_DEFER -ENODEV Cc: Bernhard Frauendienst <openwrt@nospam.obeliks.de> Cc: Bernhard Frauendienst <kernel@nospam.obeliks.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.15 to 5.15.63John Audia2022-08-253-6/+6
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.62Petr Štetiar2022-08-233-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport U-Boot environment data NVMEM driverRafał Miłecki2022-08-172-4/+4
| | | | | | It parses U-Boot env data into NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.15 to 5.15.59John Audia2022-08-062-2/+2
| | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: silence refresh warningChristian Lamparter2022-08-051-1/+1
| | | | | | |Warning: trailing whitespace in line 66 of drivers/mtd/parsers/Kconfig Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.58John Audia2022-07-312-7/+7
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.57John Audia2022-07-311-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.55John Audia2022-07-317-53/+11
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* linux/generic/pending-5.15: add missing patch headersFlorian Eckert2022-07-147-44/+173
| | | | | | | This patches does not have a valid patch headers and does not apply on an external git tree with 'git am'. To fix this add the missing headers. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/linux/pending-5.15: rename patchesFlorian Eckert2022-07-142-0/+0
| | | | | | | The consecutive number 483 is assigned twice. This change fixes this. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 5.15 to 5.15.53Rui Salvaterra2022-07-112-10/+10
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.51John Audia2022-07-111-5/+5
| | | | | | | | | | | | Manual rebase by Marty Jones: bcm27xx/patches-5.15/950-0078-BCM2708-Add-core-Device-Tree-support.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> Signed-off-by: Marty Jones <mj8263788@gmail.com> [Apply same changes to new dts entry in modified file] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport mtd dynamic partition patchChristian Marangi2022-07-081-1/+1
| | | | | | | | | | | Backport upstream solution that permits to declare nvmem cells with dynamic partition defined by special parser. This provide an OF node for NVMEM and connect it to the defined dynamic partition. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd patch adding of_platform_populate() callsRafał Miłecki2022-07-082-8/+9
| | | | | | This is required for non-parser drivers handling MTD devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: 5.15: refresh patchesNick Hainke2022-07-011-1/+1
| | | | | | | | | Refresh patches: - 402-mtd-blktrans-call-add-disks-after-mtd-device.patch - 420-mtd-set-rootfs-to-be-root-dev.patch - 495-mtd-core-add-get_mtd_device_by_node.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix variable erasesize patchJohn Thomson2022-06-291-208/+64
| | | | | | | | | Update this pending patch to remove the untested (variable eraseregions) section, alongside simplifying the patch. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> [refresh and split out unrelated refreshes] Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: cut broken SPI_NOR 4K eraseblock LIMIT patchJohn Thomson2022-06-291-71/+0
| | | | | | | | | | | | | | | | | | Since 4e0c54bc5bc8 ("kernel: add support for kernel 5.4"), the spi-nor limit 4k erasesize to spi-nor chips below a configured size patch has not functioned as intended. For uniform erasesize SPI-NOR devices, both nor->erase_opcode & mtd->erasesize are used in erase operations. These are set before, and not modified by, this CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT patch. Thus, an SPI-NOR device with CONFIG_MTD_SPI_NOR_USE_4K_SECTORS will always use 4k erasesize (where the device supports it). If this patch was fixed to function as intended, there would be cases where devices change from a 4K to a 64K erasesize. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* kernel: bump 5.15 to 5.15.49Rui Salvaterra2022-06-271-1/+1
| | | | | | | | | Deleted (upstreamed): generic/backport-5.15/702-v5.19-34-net-ethernet-mtk_eth_soc-fix-misuse-of-mem-alloc-int.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.49&id=fcba12a4308143f1f1dcb0face8b3ffb51edcc5c Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.47Rui Salvaterra2022-06-274-8/+8
| | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch [01] [01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.47&id=b24ca1cf846273361d5bd73a35de95a486a54b6d Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [Removed 702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.46Rui Salvaterra2022-06-278-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/400-mtdblock-warn-if-opened-on-NAND.patch [01] generic/backport-5.15/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch [02] bcm27xx/patches-5.15/950-0029-Revert-mailbox-avoid-timer-start-from-callback.patch [03] bcm27xx/patches-5.15/950-0417-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [04] bcm27xx/patches-5.15/950-0740-drm-vc4-hvs-Fix-frame-count-register-readout.patch [05] bcm27xx/patches-5.15/950-0755-drm-vc4-hvs-Reset-muxes-at-probe-time.patch [06] bcm27xx/patches-5.15/950-0759-drm-vc4-txp-Don-t-set-TXP_VSTART_AT_EOF.patch [07] bcm27xx/patches-5.15/950-0760-drm-vc4-txp-Force-alpha-to-be-0xff-if-it-s-disabled.patch [08] bcm53xx/patches-5.15/031-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch [09] mediatek/patches-5.15/102-mt7629-enable-arch-timer.patch [10] Manually rebased: bcm27xx/patches-5.15/950-0741-drm-vc4-hvs-Use-pointer-to-HVS-in-HVS_READ-and-HVS_W.patch [01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=f41c9418c5898c01634675150696da290fb86796 [02] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d5b66645305c6f3a1b2cf75cee4157b07f293309 [03] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=119f99209d8531359bcb935f252ec435f9d21b13 [04] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=c4e1280abead1552e1764684079a43e222ccd163 [05] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=08465a1889cb48ec64431e9db745b5be15399251 [06] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=0e26a6da02e63b75b629573d13966c36aa6264f0 [07] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=01c9020b2e7c85e394879f34851805179ac3d1d8 [08] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d47f85cc0171a5d3c5bd8cbb8a98983ca3357cbd [09] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=5151f24ac937ff7eb1f078257c66e3c0f0296010 [10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=ffea838686b82fbb2801cdfad6ba5309d15c032d Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: use upstream compatible for RedBoot FIS parserTomasz Maciej Nowak2022-06-241-22/+0
| | | | | | No reason to keep that around, since upstream one does the same. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* kernel: drop patch adding hardcoded kernel compilation flagsRafał Miłecki2022-06-201-25/+0
| | | | | | | | | | | | | | | | | | | 1. KCFLAGS should be used for custom flags 2. Optimization flags are arch / SoC specific 3. -fno-reorder-blocks may *worsen* network performace on some SoCs 4. Usage of flags was *reversed* since 5.4 and noone reported that If we really need custom flags then CONFIG_KERNEL_CFLAGS should get default value adjusted properly (per target). Ref: 4e0c54bc5bc8 ("kernel: add support for kernel 5.4") Link: http://lists.openwrt.org/pipermail/openwrt-devel/2022-June/038853.html Link: https://patchwork.ozlabs.org/project/openwrt/patch/20190409093046.13401-1-zajec5@gmail.com/ Cc: Felix Fietkau <nbd@nbd.name> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: use KCFLAGS for passing EXTRA_OPTIMIZATION flagsRafał Miłecki2022-06-191-9/+3
| | | | | | | This uses kernel's generic variable and doesn't require patching it with a custom Makefile change. It's expected *not* to change any behaviour. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd parser for Sercomm partitionsRafał Miłecki2022-06-191-5/+5
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx reduxChristian Lamparter2022-06-191-32/+0
| | | | | | | | | | | | | | | | | | Linux' upstream MTD-Maintainer Miquèl Raynal noted: |Reverting seems the safest option here, not knowing how many devices |have these damaged/counterfeit chips. If it is just a couple and only on |Fritzboxes, as suggested in the Github issue this patch could be |carried through OpenWrt and that would seem more future proof IMHO. This patch follows up with the first patch. It actually moves the patches out of target/linux/generic/pending into the ipq40xx's patch heap and adds a little note what happend. For more information, discussions or reports about bad TC58NVG0S3Hs, please visit the OpenWrt's Github Issue #9962: <https://github.com/openwrt/openwrt/issues/9962> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: backport upstream mtk_eth_soc patchesFelix Fietkau2022-06-181-4/+4
| | | | | | Includes MT7986 ethernet support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move mtk flow offload patches to backport-5.15Felix Fietkau2022-06-1812-3661/+6
| | | | | | They were accepted upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.15 to 5.15.45Rui Salvaterra2022-06-062-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.44Rui Salvaterra2022-06-061-2/+2
| | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.42Rui Salvaterra2022-06-068-190/+9
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch [1] generic/pending-5.15/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch [2] generic/pending-5.15/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch [3] generic/pending-5.15/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch [4] generic/pending-5.15/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch [5] Manually rebased: generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=88b937673b3552d54da20f648e61a123f4c1fa67 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=5f4197a020c049a59ea7907c31f9ab037dcefefe [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=7613dcaceee281973145588f4244f2f78ef85b7f [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=f96b2e06721249ebf8da3254cfef29dcb6583948 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=b329889974aed47e1167c85653c07097013e01a7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.41Rui Salvaterra2022-06-062-10/+10
| | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch [1] Other patches automatically rebased. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.41&id=99858114a3b2c8f5f8707d9bbd46c50f547c87c0 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* generic: remove patch to fix vlan setup on mv88e6xxxJosef Schlehofer2022-06-051-27/+0
| | | | | | | | | | | | This patch was present in Linux kernel [1] since version 5.11rc1, but it was superseded by another patch, which set configure_vlan_while_not_filtering to true by default since kernel v5.12-rc2 [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/net/dsa/mv88e6xxx/chip.c?h=v5.15.41&id=b8b79c414eca4e9bcab645e02cb92c48db974ce9 [2] https://github.com/torvalds/linux/commit/0ee2af4ebbe3c4364429859acd571018ebfb3424# Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xxChristian Lamparter2022-06-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hannu Nyman wrote in openwrt's github issue #9962: |Based on forum discussion, the commit 0bc794a |"kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash" |causes flash memory chip misdetection for some other |Fritzbox devices, as the commit only defines a 4-byte flash |memory chip ID that matches several chips used in the devices. | |See discussion from this onward |<https://forum.openwrt.org/t/openwrt-22-03-0-rc1-first-release-candidate/126045/182> | |OpenWrt 22.03.0-rc2 and rc3 are causing on a Fritzbox 7412 |bootloops due to a misdetected flash chip. | |Yup, that patch is missing the 5th ID byte entirely - both chips |share the same first 4; | | TC58NVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0x72 (digikey datasheet, page 35) | TC58BVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0xf2 (digikey datasheet, page 28) | |The commit has also been backported to openwrt-22.03 after rc1, |so both rc2 and rc3 suffer from this bug." Andreas' TC58NVG0S3H seems not to follow Toshibas/Kioxa's own datasheet. It only reports the first four bytes: "98 f1 80 15 00 00 00 00". This patch changes the id_len in the entry to 8. This makes it so that Andreas' NAND is still detected. At the same time, this prevents other Toshiba NAND flash chips - that share the same four bytes - from being misdetected. The issue has been reported upstream, since they also accepted the initial patch... so if not addressed, 5.19/5.20 will also break those affected devices again. Reported-by: Peter-vdL Fixes: 0bc794a66845 ("kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash") Link: <https://github.com/openwrt/openwrt/issues/9962> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: 5.15: fix panic on tcp_no_window_check set with interface upChristian 'Ansuel' Marangi2022-05-291-39/+43
| | | | | | | | | | | The current reworked version cause kernel panic when the value is changes and an interface is up. Following the tcp_be_liberal impelementation, reimplement this to permit a safe change of this value without any panic. This has been tested with a QSDK package where tcp_no_window_check is used. Fixes: 92fb51bc9881 ("generic: 5.15: standardize tcp_no_window_check pending patch") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-28 08:54:17 +0000