aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-5.4
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: bump 5.4 to 5.4.31Petr Štetiar2020-04-095-68/+13
| | | | | | | | | | | | | Refreshed patches, removed upstreamed patches: oxnas: 003-ARM-dts-oxnas-Fix-clear-mask-property.patch generic: 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch Run tested: apu2, qemu-x86-64, apalis Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: 5.4: fix mips command line parameter patchBjørn Mork2020-04-091-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Fixing a build error when CONFIG_KERNEL_KEXEC is enabled: make[5]: Entering directory '/home/bjorn/tmp/tmp-lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.4.28' CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CC arch/mips/kernel/machine_kexec.o arch/mips/kernel/machine_kexec.c: In function 'kexec_nonboot_cpu_jump': arch/mips/kernel/machine_kexec.c:268:27: error: 'relocate_new_kernel_size' undeclared (first use in this function); did you mean 'kexec_relocate_new_kernel_end'? reboot_code_buffer + relocate_new_kernel_size); ^~~~~~~~~~~~~~~~~~~~~~~~ kexec_relocate_new_kernel_end arch/mips/kernel/machine_kexec.c:268:27: note: each undeclared identifier is reported only once for each function it appears in arch/mips/kernel/machine_kexec.c: In function 'kexec_reboot': arch/mips/kernel/machine_kexec.c:306:27: error: 'relocate_new_kernel_size' undeclared (first use in this function); did you mean 'kexec_relocate_new_kernel_end'? reboot_code_buffer + relocate_new_kernel_size); ^~~~~~~~~~~~~~~~~~~~~~~~ kexec_relocate_new_kernel_end make[7]: *** [scripts/Makefile.build:266: arch/mips/kernel/machine_kexec.o] Error 1 Signed-off-by: Bjørn Mork <bjorn@mork.no>
* generic: backport Wistron Neweb D19Q1 patchesPawel Dembicki2020-04-081-0/+55
| | | | | | | Backport patches which adds suport for the Wistron Neweb D19Q1 3G/4G modem, used in D-Link DWR-960. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* generic: fix flow table hw offloadJohn Crispin2020-04-061-15/+18
| | | | | | Make the driver work with recent upstream changes. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "generic: 5.4: Add 4B_OPCODES flag to w25q256"Chuanhong Guo2020-04-055-8/+8
| | | | | | | | | | | This reverts commit d7f21940bcaf70ba404d354c7fa6519c1717d00a. Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID, but only the latter has proper 4B_OPCODES support. W25Q256FV has all 4B read instructions but it lacks a 4B page program instruction, causing the entire flash to be read-only. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: generic: 5.4: fix mtd concat panic on read/write functionsMichal Cieslakiewicz2020-03-291-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2431c4f5b46c32c4ac495456b1ef4ce59c0bb85d ("mtd: Implement mtd_{read,write}() as wrappers around mtd_{read,write}_oob()") for kernel 5.4 restrict mtd devices to register only one type of read/write functions (either generic or OOB). mtd concat does not follow above rule and defines both methods at the same time, causing this type of device to be rejected by kernel. For routers that use mtd concat for root UBI volume that means kernel panic and boot loop with following error: [ 0.767307] Creating 1 MTD partitions on "ubi-concat": [ 0.772547] 0x000000000000-0x000007500000 : "ubi" [ 0.777953] ------------[ cut here ]------------ [ 0.782683] WARNING: CPU: 0 PID: 1 at drivers/mtd/mtdcore.c:621 add_mtd_device+0x84/0x5f4 [ 0.790983] Modules linked in: [ 0.794093] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.24 #0 [ 0.799932] Stack : 80680000 8062af20 00000000 00000000 8062a0f0 87c2dae4 87c282fc 8065fd23 [ 0.808430] 805c64f4 00000001 807b32d8 80670000 80670000 00000001 87c2da98 25c15bcb [ 0.816909] 00000000 00000000 807e0000 0000006e 61696e74 00000000 2e342e32 34202330 [ 0.825397] 0000006e cef2ada7 00000000 000c1ded 00000000 00000009 00000000 8034de64 [ 0.833889] 00000009 80670000 80670000 80676d18 00000000 80320044 00000000 807b0000 [ 0.842381] ... [ 0.844861] Call Trace: [ 0.847367] [<80069994>] show_stack+0x30/0x100 [ 0.851913] [<8007e8ac>] __warn+0xc0/0x10c [ 0.856072] [<8007e954>] warn_slowpath_fmt+0x5c/0xac [ 0.861134] [<8034de64>] add_mtd_device+0x84/0x5f4 [ 0.866001] [<80352a50>] add_mtd_partitions+0xd8/0x1b8 [ 0.871231] [<803527b8>] parse_mtd_partitions+0x238/0x3f8 [ 0.876717] [<8034e51c>] mtd_device_parse_register+0x48/0x1b0 [ 0.882586] [<8038dd2c>] virt_concat_probe+0x170/0x1ec [ 0.887820] [<803334c8>] platform_drv_probe+0x40/0x94 [ 0.892970] [<80331638>] really_probe+0x104/0x35c [ 0.897766] [<80331d54>] device_driver_attach+0x70/0x98 [ 0.903072] [<80331ddc>] __driver_attach+0x60/0x100 [ 0.908042] [<8032f668>] bus_for_each_dev+0x68/0xa4 [ 0.912989] [<803309d4>] bus_add_driver+0x1f0/0x200 [ 0.917952] [<80332448>] driver_register+0x84/0x148 [ 0.922906] [<80060a1c>] do_one_initcall+0x7c/0x1dc [ 0.927870] [<80684e14>] kernel_init_freeable+0x158/0x23c [ 0.933361] [<805387d8>] kernel_init+0x10/0xf0 [ 0.937883] [<80064dd8>] ret_from_kernel_thread+0x14/0x1c [ 0.943375] ---[ end trace 62e0927fba490f68 ]--- [...] [ 2.266513] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.274893] Rebooting in 1 seconds.. This patch makes mtd concat to follow new mtd requirements by registering either normal or oob versions of read/write functions, but not both at the same time. OOB is used only when underlying mtd devices provide such functionality (like NAND chips) - otherwise generic methods are used. Tested successfully on Netgear WNDR4300. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* kernel: update arc-specific patchEvgeniy Didin2020-03-291-11/+11
| | | | | | | | | | | This patch updates arc-specific patch by moving declaration of struct object before it's usage. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-284-9/+9
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport and package drivetemp hwmon from v5.5Christian Lamparter2020-03-211-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch backports the hwmon drivetemp sensor module from vanilla linux 5.5 to be available on OpenWrt's 5.4 kernel. Extract from The upstream commit by Guenter Roeck <linux@roeck-us.net>: hwmon: Driver for disk and solid state drives with temperature sensors "Reading the temperature of ATA drives has been supported for years by userspace tools such as smarttools or hddtemp. The downside of such tools is that they need to run with super-user privilege, that the temperatures are not reported by standard tools such as 'sensors' or 'libsensors', and that drive temperatures are not available for use in the kernel's thermal subsystem. This driver solves this problem by adding support for reading the temperature of ATA drives from the kernel using the hwmon API and by adding a temperature zone for each drive. With this driver, the hard disk temperature can be read [...] using sysfs: $ grep . /sys/class/hwmon/hwmon9/{name,temp1_input} /sys/class/hwmon/hwmon9/name:drivetemp /sys/class/hwmon/hwmon9/temp1_input:23000 If the drive supports SCT transport and reports temperature limits, those are reported as well. drivetemp-scsi-0-0 Adapter: SCSI adapter temp1: +27.0<C2><B0>C (low = +0.0<C2><B0>C, high = +60.0<C2><B0>C) (crit low = -41.0<C2><B0>C, crit = +85.0<C2><B0>C) (lowest = +23.0<C2><B0>C, highest = +34.0<C2><B0>C) The driver attempts to use SCT Command Transport to read the drive temperature. If the SCT Command Transport feature set is not available, or if it does not report the drive temperature, drive temperatures may be readable through SMART attributes. Since SMART attributes are not well defined, this method is only used as fallback mechanism." This patch incorperates a patch made by Linus Walleij: 820-libata-Assign-OF-node-to-the-SCSI-device.patch This patch is necessary in order to wire-up the drivetemp sensor into the device tree's thermal-zones. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: 5.4: Add 4B_OPCODES flag to w25q256Robert Marko2020-03-125-8/+8
| | | | | | | This patch backports the upstream patch that adds the 4B_OPCODES flag to w25q256 under 5.4 kernel. This is needed for ipq40xx and ramips. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.4 to 5.4.24Koen Vandeputte2020-03-097-22/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: backport mtd partition address fix sent upstreamRafał Miłecki2020-03-091-2/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add support for kernel 5.4Koen Vandeputte2020-02-28110-1405/+708
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: copy kernel 4.19 code to 5.4Hauke Mehrtens2020-02-28118-0/+15718
| | | | | | | No changes were done to the patches while coping them. Currently they do not apply on top of kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: refresh patchesAleksander Jan Bajkowski2020-02-221-29/+0
| | | | | | | | just run: make target/linux/refresh V=s Fixes: 6e315de0f422acf66c3505a4ed8c095a0f5d3424 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: add support for GD25D05 SPI NORKoen Vandeputte2020-02-041-0/+29
This chip is used on newer RB912UAG-5HPnD r2 boards: Before: [ 0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10 [ 0.649381] NAND flash driver for the RouterBOARD 91x series After: [ 0.641714] m25p80 spi0.0: found gd25d05, expected m25p80 [ 0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes) [ 0.655122] Creating 4 MTD partitions on "spi0.0": [ 0.660164] 0x000000000000-0x00000000c000 : "routerboot" [ 0.667782] 0x00000000c000-0x00000000d000 : "hard_config" [ 0.675073] 0x00000000d000-0x00000000e000 : "bios" [ 0.682613] 0x00000000e000-0x00000000f000 : "soft_config" [ 0.690304] NAND flash driver for the RouterBOARD 91x series Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 04:20:06 +0000