aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek/filogic/config-5.15
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: filogic: enable driver for MediaTek XS-PHYDaniel Golle2023-08-071-1/+1
| | | | | | | | Enable driver for MediaTek SuperSpeedPlus XS-PHY transceiver for the USB3.1 GEN2 controllers found in the MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit dc4aafb30939316a163c2eaede6811d871cace2f)
* mediatek: add basic mt7988 device tree supportSam Shih2023-05-241-0/+1
| | | | | | | | This add basic device tree support for mediatek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit e3a681bab4b2c193704e76b8a6091e57f0fab14e)
* mediatek: filogic: add driver for Richtek RT5190A regulatorDaniel Golle2023-05-241-1/+2
| | | | | | | | | The Richtek RT5190A is used on the MT7988 reference board. Backport and enable the driver on the filogic subtarget, so we can support cpufreq on the MT7988 reference board. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit a3cf3e2c489d5b6f534d1b4d6f7b462f81c9c141)
* mediatek: add driver for built-in 2.5G Ethernet PHYDaniel Golle2023-05-241-0/+1
| | | | | | | | | Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC. To function the PHY also needs firmware files which have not yet been published via linux-firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ef2a831dabacfda6c36c79b8f963b5fdd9b2d080)
* mediatek: update pending SoC Ethernet PHY driverDaniel Golle2023-05-241-1/+1
| | | | | | | | Update driver for MediaTek's built-in Gigabit Ethernet PHYs which can be found in the MT7981 and MT7988 SoCs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 987a0b2b3011a9e5ee3e4120b068fb2f113628a7)
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-241-0/+2
| | | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 958fdf36e35c814eb83faf2c39db4ca379c921b5)
* generic: add support for MediaTek NETSYS v3Daniel Golle2023-05-241-0/+1
| | | | | | | | In order to support Ethernet on the MT7988 SoC add support for NETSYS v3 as well as new paths and USXGMII SerDes to the mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 6983a215d9d1966f95bc5b1c0045c200948b2079)
* mediatek: add mt7988 pinctrl driver supportSam Shih2023-05-241-0/+1
| | | | | | | | This adds provisional pinctrl driver support for the MediaTek MT7988 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9e6a7e808f2e9dd02733ccc41827940fb421091d)
* mediatek: add mt7988 clock drivers supportSam Shih2023-05-241-0/+1
| | | | | | | | This adds clock drivers for the MediaTek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b33c1858767e5109913ac2195ec2b2b8ef0e726a)
* kernel: enable (ARM|ARM64)_MODULE_PLTS in generic configTony Ambardar2023-05-241-1/+0
| | | | | | | | | | | | | | | | | | | | | This allows loading modules with large memory requirements, recently needed while testing on armvirt/32. Past forum discussions [1] and bug reports [2] also raised this and the ipq806x target already set it in response [3]. Given this increases kernel image size by only ~1KB, is generally useful on multi-platform kernels, and enabled by default on upstream arm32 Linux, add it to the generic config. The setting has similar utility on arm64, is a requirement for KASLR, and already enabled on most OpenWrt aarch64 targets, so pull this into the top-level generic config. [1]: https://forum.openwrt.org/t/vmap-allocation-for-size-442368-failed-use-vmalloc-size-to-increase-size/34545/7 [2]: https://github.com/openwrt/openwrt/issues/8282 [3]: f81e148eb6 ("ipq806x: update 4.19 kernel config"). Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit c2d194a34eb1a62a610f0437287db6c3eca64d5a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: improve handling of CONFIG_IO_URINGTony Ambardar2023-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | Kernel setting CONFIG_IO_URING supports high-performance I/O for file access and servers, generally for more performant platforms, and adds ~45 KB to kernel sizes. The need for this on less "beefy" devices is questionable, as is the size cost considering many platforms have kernel size limits which require tricky repartitioning if outgrown. The size cost is also large relative to the ~180 KB bump expected between major OpenWRT kernel releases. No OpenWrt packages have hard dependencies on this; samba4 and mariadb can take advantage if available (+KERNEL_IO_URING:liburing) but otherwise build and work fine. Since CONFIG_IO_URING is already managed via the KERNEL_IO_URING setting in Config-kernel.in (default Y), remove it from those target configs which unconditionally enable it, and update the defaults to enable it conditionally only on more powerful 64-bit x86 and arm devices. It may still be manually enabled as needed for high-performance custom builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: fix handling of CONFIG_DYNAMIC_DEBUGTony Ambardar2023-05-031-1/+0
| | | | | | | | | | Since CONFIG_DYNAMIC_DEBUG is already managed via the KERNEL_DYNAMIC_DEBUG setting in Config-kernel.in (default N), remove or disable it in target configs which unconditionally enable it, along with the related setting CONFIG_DYNAMIC_DEBUG_CORE. This saves several KB in the kernels for ipq40xx, ipq806x, filogic, mt7622, qoriq, and sunxi. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Activate CONFIG_ARM64_SW_TTBR0_PANHauke Mehrtens2023-04-291-1/+0
| | | | | | | | | | | | | This activates the CONFIG_ARM64_SW_TTBR0_PAN option for all arm64 kernels by default. The CONFIG_ARM64_SW_TTBR0_PAN option prevents the kernel form accessing user space memory directly. This makes it harder to exploit the kernel. This is activated by default and was already activate on all other arm64 targets before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: filogic: update kernel config-5.15Daniel Golle2023-04-201-1/+4
| | | | | | | Expose thermal-zone as hwmon sensor, remove thermal emulation driver and add some missing symbols. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for built-in GE PHYs of newer SoCsDaniel Golle2023-03-271-0/+1
| | | | | | | | | | | MT7981 and the upcoming MT7988 have built-in Gigabit Ethernet PHYs. While they share some design properties with the PHYs present in MT753x, they do need calibration data from the SoC's efuse. Add driver to support them. Upstreaming it is planned, but there are still some ongoing discussions with MediaTek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport pinctrl driver for MT7981 SoCDaniel Golle2023-03-271-0/+1
| | | | | | | Backport the pinctrl driver for the MT7981 SoC. The driver has also been submitted upstream and is part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport clk driver for MT7981 SoCDaniel Golle2023-03-271-0/+2
| | | | | | | Backport driver for common clocks in MT7981 SoC. The driver has also been submitted upstream and became part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: enable bootargs-override for filogic subtargetDavid Bauer2023-03-241-0/+1
| | | | | | | | | The ASUS TUF-AX4200 bootloader adds invalid parameters for the rootfs. Without overwriting the cmdline, the kernel crashes when trying to attach the rootfs, as OpenWrt uses a different partition than the vendor OS. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-071-1/+1
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: filogic: enable maxlinear PHY support, refresh configFelix Fietkau2022-11-091-0/+1
| | | | | | Needed for the 7986 RFB1 board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: filogic: disable swconfigAleksander Jan Bajkowski2022-11-051-1/+0
| | | | | | | | | | | | This subtarget supports 3 devices: * Bananapi BPi-R3 (added in a96382c1bb204698cd43e82193877c10e4b63027), * MediaTek MTK7986 rfba AP (added in cffc77ae55ed0e5b9e70417d6a1e1d280cea92cf), * MediaTek MTK7986 rfbb AP (added in cffc77ae55ed0e5b9e70417d6a1e1d280cea92cf). This subtarget supports DSA from the beginning. It looks like CONFIG_SWCONFIG was copied from another config when the subtarget was created. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: filogic: refresh configAleksander Jan Bajkowski2022-11-051-4/+4
| | | | | | | This was done by executing these command: $ time make kernel_oldconfig CONFIG_TARGET=subtarget Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: clean up platform kernel modulesDaniel Golle2022-10-191-2/+0
| | | | | | | | | | | | | | Remove kmod-sdhci-mtk as the mtk-sd driver is built-in anyway for the relevant subtargets in order to support mounting rootfs from eMMC or SD card. Add kmod-iio-mt6577-auxadc to support reading the raw values from the auxadc unit used as in-SoC thermal sensor. This driver was previously built-in, but as thermal itself works well without it there is no use for it in every day use of a device. Build the module to still allow access to the raw values for those who need it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: use UBI fast map to speed up bootDaniel Golle2022-10-181-0/+1
| | | | | | | Use UBI fast map feature to avoid scanning the whole flash on each boot which takes several seconds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: remove target specific CONFIG_IKCONFIG linesFelix Fietkau2022-10-141-2/+0
| | | | | | Use generic configuration for this feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move ubnt ledbar driver to a separate packageFelix Fietkau2022-09-301-1/+0
| | | | | | | Simplifies the tree by removing a non-upstream kernel patch and related kconfig symbols Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: build USB XHCI support as moduleDaniel Golle2022-09-141-5/+0
| | | | | | | | Instead of always including the XHCI driver in the kernel on all MediaTek boards, selectively include the kernel module only on boards which actually make use of USB functionality. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: unset CONFIG_CMDLINE_OVERRIDE for all targets but mt7629Daniel Golle2022-09-121-0/+1
| | | | | | | | | | The newly introduced config symbol CONFIG_CMDLINE_OVERRIDE is only set for mt7629 for now which breaks automated build on all other mediatek subtargets. Make sure the symbol is configured as 'is not set' for all remaining subtargets. Fixes: c27279dc26 ("mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX.") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add filogic subtargetFelix Fietkau2022-08-281-0/+434
Initially this covers MT7986 only, but it will later be expanded to cover other Filogic branded platforms by MediaTek Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-27 22:36:39 +0000