openwrt/upstream - upstream openwrt

	Commit message (Collapse)	Author	Age	Files	Lines
*	mpc85xx: use the generic board detect	Mathias Kresin	2017-10-25	1	-3/+3
\| \| \| \| \| \| \| \| \| \| \| \|	Use the values populated by the generic board detect function. The first compatible from the device tree source file will be the board name in userspace. The model property from the device tree source file will be the model name. Change the board name where used in the userspace and drop the target specific board detect, to use the generic one. Signed-off-by: Mathias Kresin <dev@kresin.me>
*	mpc85xx: Add Aerohive HiveAP-330 Access Point	Chris Blake	2017-10-14	1	-5/+8
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The following adds the Aerohive HiveAP-330 Access Point to LEDE under the mpc85xx/p1020 subtarget. Hardware: - SoC: Freescale P1020NSE2DFB - NAND: Intel JS28F512M29EWH 64MB - Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - 5.0GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - Eth2: Atheros AR8035-A - TPM: Atmel AT97SC3204 - LED Driver: TI LP5521 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; tftpboot 0x1000000 192.168.1.101:lede- mpc85xx-p1020-hiveap-330-initramfs.zImage; tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt; bootm 0x1000000 - 0x6000000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NAND. sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
*	treewide: use the generic board_name function	Mathias Kresin	2017-07-15	1	-2/+2
\| \| \| \| \| \|	Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
*	targets: base-files: diag.sh does not need to be executable	Luka Perkov	2015-02-07	1	-0/+0
\| \| \| \| \| \|	Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44305
*	add "preinit_regular" diag.sh set_state argument	John Crispin	2014-12-15	1	-0/+4
\| \| \| \| \| \| \| \| \| \| \| \|	This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715
*	base-files: diag does not need to insmod any drivers, procd already did it ↵	John Crispin	2013-06-21	1	-4/+0
\| \| \| \| \| \| \| \|	for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999
*	mpc85xx: add user-space support for the TL-WDR4900 v1	Gabor Juhos	2013-02-21	1	-0/+35
	Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35733