aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: fix arch-dependent bug in hso moduleFelix Fietkau2013-09-1010-0/+490
| | | | | | | | | | Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 37931
* brcm47xx: add me as maintainerHauke Mehrtens2013-09-071-0/+1
| | | | SVN-Revision: 37916
* ar71xx: use the lzma loader for the WRT160NLGabor Juhos2013-09-071-2/+2
| | | | | | | | | | | | | | | | | | | | Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37915
* ppc40x: remove 3.8 supportGabor Juhos2013-09-078-2043/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37914
* ppc40x: switch to 3.10Gabor Juhos2013-09-071-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37913
* ppc40x: add support for 3.10Gabor Juhos2013-09-078-0/+2046
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37912
* brcm63xx: drop linux 3.9 supportJonas Gorski2013-09-06151-17416/+0
| | | | | | | | It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37911
* brcm63xx: switch to linux 3.10Jonas Gorski2013-09-061-1/+1
| | | | | | | | 3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37910
* kernel: b53: support phy ids for BCM5365Jonas Gorski2013-09-052-2/+28
| | | | | | | | | | | | BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37906
* Add missing symbolImre Kaloz2013-09-051-0/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 37897
* kernel: b53: allow access the MIB counters on BCM5365Hauke Mehrtens2013-09-041-1/+1
| | | | | | | | | | b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37895
* ar71xx: fix NetGear initramfs image namesGabor Juhos2013-09-031-1/+1
| | | | | | | | | The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37892
* kernel: update 3.10 to 3.10.10Gabor Juhos2013-09-0215-15/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37890
* ar71xx: image: reorder Image/Build/* macrosGabor Juhos2013-09-021-18/+35
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37889
* ar71xx: image: simplify more oneliner macrosGabor Juhos2013-09-021-46/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37888
* ar71xx: image: simplify oneliner loader macrosGabor Juhos2013-09-021-9/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37887
* ar71xx: image: simplify oneliner initramfs macrosGabor Juhos2013-09-021-42/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37886
* ar71xx: image: simplify oneliner buildkernel macrosGabor Juhos2013-09-021-22/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37885
* mcs814x: dlan-usb-extender: fix usbdev triggerFlorian Fainelli2013-09-021-1/+1
| | | | | | | | | | Every device I connect to the USB port is detected as 2-1, not 1-1. So adjust the default setting accordingly. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37882
* ar71xx: optimize kernel generationGabor Juhos2013-09-021-25/+77
| | | | | | | | | | | | | When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37881
* generic: remove linux version checks from myloader.cGabor Juhos2013-09-021-6/+0
| | | | | | | | | | | The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37880
* ar71xx: image: dynamically generate Image/Build/Template/* macrosGabor Juhos2013-09-021-79/+21
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37879
* ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2Gabor Juhos2013-09-021-2/+8
| | | | | | | | | | | | | | It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> SVN-Revision: 37878
* ar71xx: remove fs_* variables from image/MakefileGabor Juhos2013-09-021-170/+165
| | | | | | | | | | | | Those are not needed since we are generating the initramfs images along with the others. Remove the variables and use the template names directly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37876
* ar71xx: fix initramfs image generation for Cameo933x profilesGabor Juhos2013-09-021-1/+5
| | | | | | | | | | | | | | | | Initramfs images are not generated for profiles which are using the squashfs-only template. Add the missing 'Image/Build/Template/squashfs-only/initramfs' to fix that. Also, 'Image/Build/Cameo933x/initramfs' uses wrong parameters for 'MkuImageLzma/initramfs' due to a misplaced commma. Remove that to fix the generated initramfs images. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37871
* x86/alix2: remove kernel config for 3.8Gabor Juhos2013-09-021-26/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37870
* x86/alix2: switch to 3.10.9Gabor Juhos2013-09-021-1/+1
| | | | | | | | | | | | | | | | | | Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37869
* x86/alix2: add kernel config for 3.10Gabor Juhos2013-09-021-0/+24
| | | | | | | | | | | | | | | | | | | | Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37868
* x86: add support for 3.10Gabor Juhos2013-09-0210-0/+1475
| | | | | | | | | | | | | | | | | | | | | | | Add kernel configuration and patches for Linux 3.10. Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks, and the kernel patches were refreshed. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37867
* imx6: add uboot-envtools to default packagesLuka Perkov2013-08-291-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37859
* mvebu: remove maintainer ship roleFlorian Fainelli2013-08-281-1/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37855
* kernel: fix booting issues on imx23 and imx6 targetsFelix Fietkau2013-08-281-0/+29
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37854
* imx6: disable sdma until license issues are solvedLuka Perkov2013-08-285-81/+55
| | | | | | | | Also, synchronize patches with upstream. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37853
* imx6: refresh 3.10 kernel configLuka Perkov2013-08-281-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37850
* ar71xx: add some pending patchesGabor Juhos2013-08-273-0/+184
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37849
* kernel: don't hide the 'Warning: unable to open an initial console' messageGabor Juhos2013-08-275-55/+0
| | | | | | | | | | The 'Warning: unable to open an initial console' message indicates an error in the rootfs. Remove the patch which hides the warning. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37848
* kernel: ensure that /dev/console exists in initramfsGabor Juhos2013-08-275-0/+150
| | | | | | | | | | | Linux expects that the /dev/console node is present in the rootfs image. Create the node in initramfs, in order to make std{in,out,err} usable even in early init process. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37846
* ar71xx: don't hardwire cpu_has_dsp{,2} to zeroGabor Juhos2013-08-272-4/+35
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37845
* ar71xx: don't register USB device on WNDAP360Gabor Juhos2013-08-275-11/+7
| | | | | | | | | | | | | | | | | Apparently registering usb device on newest trunk causes this AP not to boot... Since there is no USB socket in that device anyway this can be simply removed (and device boots then no problem). [juhosg: - tweak subject line and description, - remove #include "dev-usb.h", - remove 'select ATH79_DEV_USB' from Kconfig] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37844
* kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9Felix Fietkau2013-08-263-3/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 37842
* x86/alix2: add kmod-usb2-pci to default packagesGabor Juhos2013-08-251-1/+1
| | | | | | | | | | The USB controller is sitting on the PCI bus and without the package the EHCI controller is not usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37835
* ar71xx: build factory image for DIR-505 A1Gabor Juhos2013-08-241-3/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37834
* ar71xx: allow to override kernel size in the CameoHornet profileGabor Juhos2013-08-241-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37833
* kernel: update 3.10 to 3.10.9Gabor Juhos2013-08-2375-220/+154
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37832
* generic: refresh kernel configs with kconfig.plGabor Juhos2013-08-234-6/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37831
* ramips: remove lantiq specific patchesGabor Juhos2013-08-232-57/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37830
* ramips: use correct image size parameter for DIR-610 A1Gabor Juhos2013-08-231-1/+1
| | | | | | | | | | Fixes the following error: bash: line 0: [: ralink_default_fw_size_4M: integer expression expected Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37829
* ramips: use correct parameters in the Seama templateGabor Juhos2013-08-231-2/+2
| | | | | | | | | | | | | Fixes DIR-645 image generation errors: bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected ... bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64") make[4]: *** [install] Error 1 Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37828
* ramips: update the RT3883 PCI patchGabor Juhos2013-08-231-14/+51
| | | | | | | | | | | | Fix the following warning: arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe': arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat] Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37827
* kernel/3.10: backport of_pci_get_devfn function from 3.11Gabor Juhos2013-08-231-0/+78
| | | | | | | | | | | | | | | | | Fixes the following build error on ramips/rt3883: arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \ 'of_pci_get_devfn' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Although the function is only used by the PCI driver of the RT3883 SoC but at the moment but it might be useful for other targets as well. Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37826
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 07:44:41 +0000