aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix ath79/rb4xx IRQ initialization on kernel 4.14W. Michael Petullo2019-07-031-1/+1
| | | | | | | | | | | | Apply the same approach as in commit 3b53d6fdbc24 ("ar71xx: fix pci irq init on kernel 4.14") to fix IRQ initialization for ath79-based chipsets on rb4xx. Ref: PR#2182 Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: W. Michael Petullo <mike@flyn.org> [commit ref fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: Use -v1 suffix for TP-Link WDR3600/4300Adrian Schmutzler2019-07-035-14/+14
| | | | | | | | | | | | | | | In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have been used while most other TP-Link devices include the revision. Although there actually is only one major revision of these devices, they bear the revision on their bottom (v1.x). TP-Link also refers to the devices as V1 on its web page. This patch thus adds -v1 to both so it is more consistent with other devices and with what you would expect from reading the on-device sticker and the support pages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for TP-Link TL-WR841n v14Alexander Müller2019-07-024-0/+155
| | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N. - MediaTek MT7628NN - 32 MB of RAM - 4 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet Installation: - copy the 'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin' file to your tftp server root and rename it to 'tp_recovery.bin'. - configure your PC running the TFTP server with the static IP address 192.168.0.66/24 - push the reset button and plug in the power connector. Wait until the orange led starts blinking (~6sec) Signed-off-by: Alexander Müller <donothingloop@gmail.com> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
* ramips/leds: use devicetree alias led_wlanAlexander Couzens2019-07-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | Similiar to the lantiq target use a dts alias to define the wlan led instead of static mapping in /etc/board.d/01_leds. Reduce code duplication. A device tree must define the alias "led-wlan" similiar to "led-boot". / { aliases { led-wlan = &led_wlan; }; [..] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; }; Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* gemini: Add StorLink SL93512r imagesLinus Walleij2019-07-011-7/+17
| | | | | | | | | | | This adds image generation for the StorLink reference design SL93512r. This board is now supported upstream in kernel v4.19. As this image structure is identical to SQ201 and Raidsonic, we simply refer to this as "storlink-reference" from now on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Drop switch kmod and swconfigLinus Walleij2019-07-011-1/+0
| | | | | | | | | The DIR-685 needs this module compiled in for safety (it is facing the LAN ports) and it is now (as of kernel v4.19) using the DSA switch architecture so swconfig is not needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mvebu: add initial support for uDPU boardVladimir Vid2019-06-284-0/+188
| | | | | | | | | | | | | | | | | | | This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) uDPU is intented to run on kernel 4.19 on newer due to the SFP and hardware support. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* mvebu: Fix platform.sh for non-generic espressobin versionsBrett Mastbergen2019-06-281-2/+4
| | | | | | | | When the non-generic espressobin targets were added these board checks were not updated. One side effect of this is that config is not saved during an upgrade of -emmc,-v7, or -v7-emmc devices. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: generic: add missing 4.19 config symbolPetr Štetiar2019-06-271-0/+2
| | | | | | | | | | | | | | Fixes following kernel build issue on ath79 with CONFIG_KERNEL_FTRACE=y enabled: Tracers (FTRACE) [Y/n/?] y Kernel Function Tracer (FUNCTION_TRACER) [Y/n/?] y Kernel Function Graph Tracer (FUNCTION_GRAPH_TRACER) [Y/n/?] y Enable trace events for preempt and irq disable/enable (PREEMPTIRQ_EVENTS) [N/y/?] (NEW) ... Preempt / IRQ disable delay thread to test latency tracers (PREEMPTIRQ_DELAY_TEST) [N/m/?] (NEW) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add support for TOTOLINK A7000RChuanhong Guo2019-06-263-0/+133
| | | | | | | | | | | | | | | Specifications: - SoC: MT7621AT - RAM: 128MB - Flash: 16M SPI NOR - Ethernet: 5x GE ports - WiFi: 2.4G: MT7615N 5G: MT7615N Flash instruction: Upload generated sysupgrade firmware through factory web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: add IRQ for GPIO nodeChuanhong Guo2019-06-261-0/+3
| | | | | | This makes interrupt-based gpio-keys working. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* layerscape: drop pause frame support for aquantia phyYangbo Lu2019-06-261-52/+10
| | | | | | | | | | | | An aquantia phy patch which dropped pause frame support was missing when integrated LSDK-19.03 kernel patches into OpenWrt. Without this patch, LS1043A 10G port would not work. So apply it. Patch link https://source.codeaurora.org/external/qoriq/qoriq-components/ linux/commit/?h=linux-4.14&id=66346b115818365cfaf99d292871b19f0a1d2850 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* kernel: bump 4.19 to 4.19.56Koen Vandeputte2019-06-254-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.130Koen Vandeputte2019-06-257-10/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* x86: fix missing led variable warning during bootPetr Štetiar2019-06-251-0/+2
| | | | | | | | Fixes following warning during the boot: WARNING: Variable 'led' does not exist or is not an array/object Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: add missing 4.19 config symbolPetr Štetiar2019-06-251-0/+1
| | | | | | | | Fixes following kernel build issue on x86/64: PCI PF Stub driver (PCI_PF_STUB) [N/m/y/?] (NEW) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: fix overlay support by updating to f2fs/ext4 based overlaysPetr Štetiar2019-06-252-7/+10
| | | | | | | | | | | | | | | | | Current snapshot images doesn't provide images with usable overlay filesystems: mount_root: no usable overlay filesystem found, using tmpfs overlay So this patch fixes this by updating support to current f2fs/ext4 based overlays and providing squashfs with proper rootfs TARGET_ROOTFS_PARTSIZE size. While at it, I've also added support for optional gzipping of the images, and renamed the output rootfs image filenames to match the more common naming pattern $(IMG_PREFIX)-rootfs-$(FS-TYPE).img. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: configure kernel for f2fs and ext4 based overlaysPetr Štetiar2019-06-251-0/+7
| | | | | | | | jffs2/mtdblock overlays are long time gone, and as we switch to the new f2fs/ext4 based overlays, we need to add missing support for loop block device and f2fs to kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* armvirt: fix overlay support by updating to f2fs/ext4 based overlaysPetr Štetiar2019-06-252-2/+10
| | | | | | | | | | | | | | | | | | Current snapshot images doesn't provide images with usable overlay filesystems: mount_root: no usable overlay filesystem found, using tmpfs overlay So this patch fixes this by updating support to current f2fs/ext4 based overlays and providing squashfs with proper rootfs TARGET_ROOTFS_PARTSIZE size. While at it, I've also added support for optional gzipping of the images, and renamed the output rootfs image filenames to match the more common naming pattern $(IMG_PREFIX)-rootfs-$(FS-TYPE).img. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* armvirt: configure kernel for f2fs and ext4 based overlaysPetr Štetiar2019-06-251-0/+7
| | | | | | | | jffs2/mtdblock overlays are long time gone, and as we switch to the new f2fs/ext4 based overlays, we need to add missing support for loop block device and f2fs to kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: image: fix small disk space in squashfs overlayPetr Štetiar2019-06-251-12/+1
| | | | | | | | | | | | | Current squashfs snapshot images are improperly padded by just 128k, which doesn't correspond with TARGET_ROOTFS_PARTSIZE=128 default config option, leading to following: Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom /dev/loop0 85.0K 9.0K 71.0K 11% /overlay overlayfs:/overlay 85.0K 9.0K 71.0K 11% / Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rb532,x86: image: use new IMG_COMBINED and IMG_ROOTFS varsPetr Štetiar2019-06-252-13/+13
| | | | | | | In `build: image: Add IMG_ROOTFS and IMG_COMBINED variables` we've added this new variables so switch to them now. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tegra: image: remove image paddingPetr Štetiar2019-06-251-1/+0
| | | | | | | Commit "build: Remove TARGET_IMAGES_PAD option" has removed this config option so remove it from this target as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: image: remove TARGET_IMAGES_PAD option and force paddingPetr Štetiar2019-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we're producing unusable x86 combined squashfs images (18.06.1, 18.06.2 and snapshots) as we don't enable TARGET_IMAGES_PAD, thus providing very small space for the overlay filesystem, leading to the following with OpenWrt 18.06.1 r7258-5eb055306f images on x86 QEMU: root@(none):/# mount | egrep 'root|overlay' /dev/root on /rom type squashfs /dev/loop0 on /overlay type ext4 overlayfs:/overlay on / type overlay root@(none):/# df -h | egrep 'root|overlay|Size' Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom /dev/loop0 113.0K 8.0K 97.0K 8% /overlay overlayfs:/overlay 113.0K 8.0K 97.0K 8% / We should rather ensure proper image padding in image generation code and we shouldn't rely on config options in order to generate usable images. So this patch removes TARGET_IMAGES_PAD config option and enforces padding on combined images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: mt7621: Add new device AsiaRF AP7621-001Daniel Danzberger2019-06-253-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specs: SoC: Mediatek MT7621A CPU: 4x 880Mhz Cache: 32 KB I-Cache and 32 KB D-Cach 256 KB L2 Cache (shared by Dual-Core) RAM: DDR3 512MB 16bits BUS FLASH: 16MB Switch: Mediatek Gigabit Switch (1 x LAN, 1 x WAN) USB: 1x 3.0 PCI: 3x Mini PCIe GPS: Quectel L70B BTN: Reset LED: - Power - Ethernet - Wifi - USB UART: UART is present as Pads with throughholes on the PCB. They are located on left side. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation: The stock image is a modified openwrt and can be overflashed via # sysupgrade -F image.bin Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed unused label, formatting]
* ath79: fix "spi-gpio: convert deprecated binding"Christian Lamparter2019-06-254-8/+8
| | | | | | | | This patch fixes the previous commit that rendered the devices (mostly leds) useless. Fixes: 1fa24de8c29b ("ath79: spi-gpio: convert deprecated binding") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: Code style improvements in 10_fix_wifi_macAdrian Schmutzler2019-06-251-4/+4
| | | | | | This fixes one comparison and several useless echos. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mpc85xx: Use uncompressed kernel on the HiveAP-330Chris Blake2019-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that newer builds of OpenWRT have a gzip kernel larger than 2MB~, which for some reason fails to boot on this board. However, we have 8MB of kernel space and currently the uncompressed kernel is 6.5MB~, so we have some space to grow until a better solution is worked out. Before: ## Booting kernel from Legacy Image at ee840000 ... Image Name: Linux-4.19.53 Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 2315724 Bytes = 2.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02000000 ... Image Name: OpenWrt fake ramdisk Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux RAMDisk Image (uncompressed) Data Size: 0 Bytes = 0 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at ec000000 Booting using the fdt blob at 0xec000000 Uncompressing Kernel Image ... Error: Bad gzipped data GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover Loading Ramdisk to 10000000, end 10000000 ... OK Loading Device Tree to 00ffa000, end 00fffc78 ... OK ft_fixup_l2cache: FDT_ERR_NOTFOUND After: ## Booting kernel from Legacy Image at ee840000 ... Image Name: POWERPC OpenWrt Linux-4.19.53 Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux Kernel Image (uncompressed) Data Size: 6724584 Bytes = 6.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02000000 ... Image Name: OpenWrt fake ramdisk Created: 2019-06-22 11:17:48 UTC Image Type: PowerPC Linux RAMDisk Image (uncompressed) Data Size: 0 Bytes = 0 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at ec000000 Booting using the fdt blob at 0xec000000 Loading Kernel Image ... OK OK Loading Ramdisk to 10000000, end 10000000 ... OK Loading Device Tree to 00ffa000, end 00fffc78 ... OK Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [75 cpl limit]
* apm821xx: move to 4.19 kernelsChristian Lamparter2019-06-241-2/+1
| | | | | | | | The 4.19 code has been available for some time now. Since the f2fs / loop issue has been under control I think it's time the target gets to move to it. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: switch out kernel's CRC32 methodChristian Lamparter2019-06-242-0/+4
| | | | | | | | | | | This patch replaces the OpenWrt' favoured CRC32 Sarwate algorithm with the kernel recommended SLICE8 CRC32 version. This change alone lifted btrfs writes from 40 MiB/s to 54 MiB/s on my My Book Live (SLICE4 managed 48 MiB/s). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: add support for TP-Link CPE610-v1Andrew Cameron2019-06-244-0/+155
| | | | | | | | | | | | | | | | | | | | | TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, WLAN5G green LEDs - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
* ath79: spi-gpio: convert deprecated bindingChristian Lamparter2019-06-244-8/+8
| | | | | | | The old gpio-{sck,miso and mosi} binding is deprecated in favour of {sck,miso and mosi}-gpios. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: spi-gpio: convert deprecated bindingChristian Lamparter2019-06-241-2/+2
| | | | | | | The old gpio-{sck,miso and mosi} binding is deprecated in favour of {sck,miso and mosi}-gpios. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: Remove redundant LED GPIO definitions for Archer C25 v1Adrian Schmutzler2019-06-241-4/+0
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* netfilter: fix crash in flow offload by adding netns supportHsiuWen Yen2019-06-242-3/+13
| | | | | | | | | | | | | | | | | | | | Commit fcb41decf6c6 ("config: enable some useful features on !SMALL_FLASH devices") enabled netns, which in turn lead to the crash in the flow offload target. When the flow offloading framework intends to delete a flow from the hardware table, it is necessary to retrieve the namespace from nf_flowtable->ft_net. However, no one ever wrote the namespace into nf_flowtable->ft_net in advance. So the framework will mistakenly use a NULL namespace to execute dev_get_by_index_rcu(net, ifindex), leading to the kernel panic. Ref: FS#2321 Fixes: fcb41decf6c6 ("config: enable some useful features on !SMALL_FLASH devices") Tested-by: Simon Tretter <simon@mediaarchitectu.re> Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com> [merged patch into offload patch, fix for 4.19, SOB fix, commit subj/msg touches] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* cns3xxx: switch to kernel 4.19Koen Vandeputte2019-06-241-2/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.55Koen Vandeputte2019-06-245-34/+7
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.129Koen Vandeputte2019-06-247-26/+8
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.183Koen Vandeputte2019-06-243-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add promising "fix loop discard errors" hackChristian Lamparter2019-06-221-0/+164
| | | | | | | | | | | This patch adds a promising upstream patch that claims to help for the treated I/O errors happening on f2fs or ext4 on real block devices. |print_req_error: I/O error, dev loop1, sector 1334 Link: <https://patchwork.kernel.org/cover/10931787/> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: update act_ctinfoKevin Darbyshire-Bryant2019-06-202-20/+58
| | | | | | | Follow upstream changes - header file changes no executable difference at all Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* gemini: Fix up DNS-313 compatible stringLinus Walleij2019-06-202-1/+22
| | | | | | | | | It's a simple typo in the DNS file, which was pretty serious. No scripts were working properly. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [integrate upstream patch into openwrt target]
* kernel: package Broadcom BNX2X driverPetko Bordjukov2019-06-204-0/+4
| | | | | | | | | | bnx2x driver support for the x86 architecture. Includes module and firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet adapters. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added +kmod-lib-zlib-inflate as well]
* ipq40xx: Linksys: sysupgrade: Ensure OEM volumes are removedJeff Kletsky2019-06-201-20/+22
| | | | | | | | | | | | | | | | | | When OEM volumes are present in the [alt_]firmware partition, sysupgrade will write a new kernel, but will fail to write the root file system. The next boot will hang indefinitely Waiting for root device /dev/ubiblock0_0... Modified ipq40xx/base-files/lib/upgrade/linksys.sh to remove both `squashfs` and `ubifs` if found on the target firmware partition's UBI device. Run-tested-on: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [applied some shellcheck suggestions as well]
* apm821xx: fix bogus key-presses on bootChristian Lamparter2019-06-206-0/+67
| | | | | | | | | | | | | | | | | | | | | | | "There are often transient line events when the system is powered up and initialized and it is often necessary for the gpio_chip driver to clear any interrupt flags in hardware before setting up the gpio chip, especially the irqchip portions of it." <http://lists.infradead.org/pipermail/openwrt-devel/2019-June/017630.html> This patch adds a fix for the APM821XX's interrupt controller to clear any bogus pending toggled interrupts that happens on various APM821XX boards on boot. The patch also changes the debouce-interval from the default 5ms debounce interval to 60ms all around. The default setting caused on occasions that the button state became stuck in a pressed state, even though the button was released. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 4.19 to 4.19.53Koen Vandeputte2019-06-202-5/+5
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.128Koen Vandeputte2019-06-2010-22/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: generic: fix MIPS build on non-linux hostsKevin Darbyshire-Bryant2019-06-201-0/+62
| | | | | | | | | | | | | | | | | | | | calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment purposes. It included "../../../../include/linux/sizes.h" to define that size, however "sizes.h" tries to include <linux/const.h> which assumes linux system headers. These may not exist eg. the following error was encountered when building Linux for OpenWrt under macOS: In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16: arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found Change makefile to force building on local linux headers instead of system headers. Also change eye-watering relative reference in include file spec. Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this down & fixing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: fix EW-7478AC model name in DTSPetr Štetiar2019-06-201-1/+1
| | | | | | | | This fixes lower case AC in the DTS model name. Fixes: 88f7a29f99fb ("ramips: add support for Edimax EW-7476RPC / EW-7478AC") Reported-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: correct various phy-mode propertiesDavid Bauer2019-06-206-4/+8
| | | | | | | | | | | | | | | | | | | | Upstream commit 6d4cd04 changes how the internal delays of the AR803x based PHYs are enabled. With this commit, all internal delays are disabled on driver probe and enabled based on the 'phy-mode' property in the device-tree. Before this commit, the RX delay was always enabled upon soft-reset while the TX delay retained it's previous state. A hard reset enabled the RX delay while the TX delay was disabled. Because of this inconsistency, wrongly specified PHY-modes were working correctly while the hardware was in a different state. Fix the PHY-modes of some affected devices (and clean up misplaced properties along the way) to keep the devices working flawlessly with kernels >= 5.1. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 05:54:38 +0000