aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bcm47xxpart: support T_Meter partitionsRafał Miłecki2015-01-282-0/+94
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44185
* ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC addressJohn Crispin2015-01-281-3/+5
| | | | | | | | | Fix the WLAN MAC address to match the one printed on the label by using the correct address from the ART instead of the address of the LAN interface. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44183
* linux: add upstream patch to allow building dwc2 as module on 3.18Jo-Philipp Wich2015-01-281-0/+146
| | | | | | | | Also add the required config symbols to usb.mk Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44181
* kernel: add LZ4 decompressors to kconfig hackJohn Crispin2015-01-282-2/+18
| | | | | | Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 44168
* kernel: kmod-usb2-pci to Intel ixp4xx/GeodeJohn Crispin2015-01-284-4/+4
| | | | | | Signed-off-by: Ted Hess <thess@kitschensync.net> SVN-Revision: 44167
* ralink: check ethernet MAC address whether it is validJohn Crispin2015-01-281-1/+3
| | | | | | | | | The mac address usually write in factory block. but sometime user erase this block , the mac address will change to ff:ff:ff:ff:ff:ff. This patch is purpose to fix this issue. Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44166
* ar71xx: add default LED configuration for D-Link DIR-615 rev. C1John Crispin2015-01-281-0/+5
| | | | | | | | | This patch adds an entry in the uci-defaults' led-file to configure the WAN and WLAN LEDs by default. Signed-off-by: Vincent Wiemann <me@bibbl.com> SVN-Revision: 44165
* kernel: update 3.14 to 3.14.30Luka Perkov2015-01-285-11/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44158
* kernel: bcm47xxpart: support boart_data partition on XiaomiRafał Miłecki2015-01-272-0/+78
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44157
* kernel: backport queued bcm47xxpart changesRafał Miłecki2015-01-276-208/+190
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44156
* ep93xx: fix broken kmods after r44112 (#18833)Jo-Philipp Wich2015-01-271-3/+3
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44155
* mvebu: temporary el cheapo' fan control scriptImre Kaloz2015-01-262-0/+21
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44153
* kernel: add missing symbol to generic 3.18 configJo-Philipp Wich2015-01-251-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44150
* mvebu: add missing config symbolJo-Philipp Wich2015-01-251-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44147
* ipq806x: declare missing config symbolsJo-Philipp Wich2015-01-251-0/+4
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44144
* generic/3.19: fixup the value of IFF_NO_IP_ALIGNImre Kaloz2015-01-251-1/+1
| | | | | | | Reported-by: Stephen Walker <stephendwalker+openwrt@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44139
* kernel: update 3.14 to 3.14.29Luka Perkov2015-01-253-13/+9
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44137
* cns21xx: remove stray CONFIG_WAN from kernel configJo-Philipp Wich2015-01-251-1/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44136
* xburst: fix kernel buildJo-Philipp Wich2015-01-251-0/+64
| | | | | | | | | | | | Changeset r43049 removed the "062-mips_decompressor_build_fix.patch" which is still required to properly build the xburst kernel. Fix the syntax error in the preprocessed code by explicitely undefining the "memcpy" and "memset" macros prior to declaring the replacements functions. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44133
* mvebu: use pwmfan in the profileImre Kaloz2015-01-251-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44131
* mvebu: preliminary 3.19 supportImre Kaloz2015-01-2513-0/+1836
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44130
* mvebu: gpio based pwm supportImre Kaloz2015-01-258-0/+969
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44129
* mvebu: update mamba dtsImre Kaloz2015-01-251-70/+71
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44128
* mvebu: backport some upstream changesImre Kaloz2015-01-2515-2/+1563
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44127
* generic: add preliminary 3.19 supportImre Kaloz2015-01-25175-0/+31697
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44126
* kirkwood: add wpad-mini to guruplug profileLuka Perkov2015-01-251-1/+1
| | | | | | Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 44125
* kirkwood: enable swconfig by default on EA3500Luka Perkov2015-01-251-1/+1
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44124
* kirkwood: fix EA3500 ubi optionsLuka Perkov2015-01-251-2/+2
| | | | | | | | Previous options resulted in a nonfunctional image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44123
* kirkwood: drop port-based VLAN setupLuka Perkov2015-01-251-19/+6
| | | | | | | | | | | | | | | | | Using port-based VLANs depends on a non-standard swconfig parameter, which compilcates things like LuCI that don't know about it. This patch changes the default to use 802.1q VLANs internally in the switch, but without tagging packets since we have two Ethernet ports. iperf3 tests indicate no difference in performance versus port-based VLANs when the CPU port is not using tags. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44122
* generic/3.18: update to 3.18.3Imre Kaloz2015-01-251-10/+6
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44121
* ralink: fix ethernet feature TSO not workFelix Fietkau2015-01-247-155/+197
| | | | | | | | | | | | | | | | * fix TSO features verify on mt7621 firewrt board * improve tx clean up. no need to access uncached memory. also use TX_DTX register instead of read tx ring DONE bit * mt7621 need napi weight 64 to get more performance * remove netif_receive_skb, after kernel version 3.7 tcp4_gro_receive can handle tcp checksum. on rt2880 use iperf tcp LAN to WAN throughput test. with gro 135 Mbits/sec. without gro 80.4Mbits/sec. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44118
* ralink: init tx/rx vlan offload register for mt7621Felix Fietkau2015-01-242-5/+23
| | | | | | | | | | on mt7621 don't have tx vlan vid registers. so set FE_REG_FE_DMA_VID_BASE to 0. set rx vlan offload register to disable. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44117
* ralink: use fe_max_buf_size to get rx buffer sizeFelix Fietkau2015-01-241-7/+5
| | | | | | | | | | the rx_buf_size now is 1534 when mtu is 1500. the ethernet frame with vlan tag and FCS is 1522. so the buffer is enough. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44116
* ramips: fix ethernet vlan tx offload support checkFelix Fietkau2015-01-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44115
* ep93xx: remove obsolete kernel version checkFelix Fietkau2015-01-241-7/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44112
* x86: remove linux 3.3 supportFelix Fietkau2015-01-2413-1811/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44111
* build: drop obsolete kernel version dependenciesFelix Fietkau2015-01-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44110
* kernel: remove linux 3.3 patches and configFelix Fietkau2015-01-24179-45292/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44109
* pxa: mark as brokenFelix Fietkau2015-01-241-1/+1
| | | | | | It still uses the long obsolete 3.3 kernel version SVN-Revision: 44108
* x86: mark the ep80579 subtarget as brokenFelix Fietkau2015-01-241-0/+1
| | | | | | | | It still uses the long obsolete 3.3 kernel version Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44107
* mcs814x: remove linux 3.3 supportFelix Fietkau2015-01-2446-4103/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44106
* ar8216: prefix mii_xxx functions to avoid kernel namespace pollutionFelix Fietkau2015-01-243-18/+18
| | | | | | | | | Prefix the exported mii_xxx32 functions with ar8xxx_ to avoid kernel namespace pollution. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44105
* ar8216: add swconfig attribute to display ARL table on AR8327/AR8337Felix Fietkau2015-01-244-15/+220
| | | | | | | | | | | | | | Add global read-only swconfig attribute "arl_table" to display the address resolution table. So far the chip-specific part is implemented for AR8327/AR8337 only as I don't have the datasheets for the other AR8XXX chips. Successfully tested on TL-WDR4300 (AR8327rev2) and TL-WDR4900 (AR8327rev4). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44104
* ar8216: decrease page switch wait timeFelix Fietkau2015-01-242-3/+9
| | | | | | | | | | | | | | | | | | | | | | Until a few years ago the page switch wait time was set to msleep(1) what was changed to usleep_range(1000, 2000) later. I can not imagine that a low-level operation like switching page on register level takes so much time. Most likely the value of 1ms was initially set to check whether it fixes an issue and then remained w/o further checking whether also a smaller value would be sufficient. Now the wait time is set to 5us and I successfully tested this on AR8327. IMHO 5us should be plenty of time for all supported chips. However I couldn't test this due to missing hardware. If other chips should need a longer wait time we can add the wait time as a parameter to the ar8xxx_chip struct. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44103
* ar8216: add link change detection for switch portsFelix Fietkau2015-01-242-0/+36
| | | | | | | | | | Check for switch port link changes and - flush ATU in case of a change - report link change via syslog Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44102
* ar8216: fix ATU flushingFelix Fietkau2015-01-242-9/+5
| | | | | | | | | | | | | | | | | | The functionality to flush the address translation table contains two bugs which luckily compensate each other. 1. Just setting the operation is not sufficient to perform the flushing. The "active" bit needs to be set to actually trigger an action. For the vtu operations this is implemented correctly. 2. ar8xxx_phy_read_status is called every 2s by the phy state machine to check for link changes. This would have caused an ATU flush every 2s. Fix the chip-specific ATU flush functions and remove the ATU flush call from ar8xxx_phy_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44101
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-233-0/+16
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44085
* lantiq: correct value for fpi clock on ar9John Crispin2015-01-231-0/+21
| | | | | | | | | | | | | | | | | | | | | This adds a patch to target/linux/lantiq/patches-3.14 fixing a bug clock code on ar9. The current version returns the wrong value for the fpi clock frequency in some cases. See discussion for further details: https://lists.openwrt.org/pipermail/openwrt-devel/2015-January/030688.html I'm not sure about the patch naming and numbering convention. Do please let me know it this is not OK. Many thanks, Ben Mulvihill Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 44083
* ar71xx: add support for the UniFi AP Outdoor PlusJohn Crispin2015-01-226-3/+72
| | | | | | | | the GPIO controlling the rf filter is not configured properly by this patch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44077
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-228-1/+137
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 17:38:08 +0000