aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: LS421DE: improve pin configurationDaniel González Cabanelas2021-05-011-3/+12
| | | | | | | | | | | | | The CLK125 output pin at the ethernet PHY is connected via capacitor to GND and nowhere else. Disable it. Also tune the LED masks. The MPP56 and MPP60 pins at the SoC are conected to the μPD720202 USB3.0 chip: - MPP56: wired to PCIe CLKREQ# (out) - MPP60: wired to PCIe RESET# (in) Configure the pcie pinmux for these pins. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* netfilter: remove no-op kconfig symbolsRui Salvaterra2021-05-012-4/+0
| | | | | | | | | | | | | | These have long been obsolete. For reference, here's the Linux version where each symbol has been dropped: CONFIG_IP6_NF_QUEUE - 3.5 CONFIG_IP6_NF_TARGET_LOG - 3.4 CONFIG_IP_NF_MATCH_DSCP - 2.6.19 CONFIG_NF_CONNTRACK_IPV4 - 4.19 CONFIG_NF_CONNTRACK_IPV6 - 4.19 CONFIG_NF_CONNTRACK_RTCACHE - out-of-tree, superseded by flow offloading Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: add kmod-ipvlan supportChen Minqiang2021-04-302-0/+2
| | | | | | | | | | | | This kmod is similar to macvlan with the difference being that the endpoints have the same mac address. It is useful on cloud where only one mac address allowed on port, where macvlan not works but ipvlan would. One use case is where multiple IPs and gateways assign on one net port Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4Hauke Mehrtens2021-04-3012-117/+150
| | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FORTIFY_SOURCE=y is already set in the generic kernel configuration, but it is not working for MIPS on kernel 5.4, support for MIPS was only added with kernel 5.5, other architectures like aarch64 support FORTIFY_SOURCE already since some time. This patch adds support for FORTIFY_SOURCE to MIPS with kernel 5.4, kernel 5.10 already supports this and needs no changes. This backports one patch from kernel 5.5 and one fix from 5.8 to make fortify source also work on our kernel 5.4. The changes are not compatible with the 306-mips_mem_functions_performance.patch patch which was also removed with kernel 5.10, probably because of the same problems. I think it is not needed anyway as the compiler should automatically optimize the calls to memset(), memcpy() and memmove() even when not explicitly telling the compiler to use the build in variant. This increases the size of an uncompressed kernel by less than 1 KB. Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update mt7530 EEE patch from upstreamDENG Qingfang2021-04-304-242/+240
| | | | | | | | The new EEE patch is accepted upstream, so backport it and replace the current one. Cc: René van Dorst <opensource@vdorst.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* kernel: backport mtk_soc_eth fixes from v5.13Ilya Lipnitskiy2021-04-3017-79/+375
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes logic that leads to this error when booting mt7621 and other devices that use the mediatek ethernet driver: [ 23.144378] mtk_soc_eth 1e100000.ethernet: PPE table busy The rest are mostly moved from pending-5.10 to backport-5.10 with a couple of cleanups and improvements from upstream. Refresh patches. Links: https://git.kernel.org/netdev/net-next/c/c5d66587b890 https://git.kernel.org/netdev/net-next/c/3f57d8c40fea https://git.kernel.org/netdev/net-next/c/5196c4178549 https://git.kernel.org/netdev/net-next/c/787082ab9f7b https://git.kernel.org/netdev/net-next/c/c30c4a827390 https://git.kernel.org/netdev/net-next/c/3630d519d7c3 https://git.kernel.org/netdev/net-next/c/16ef670789b2 https://git.kernel.org/netdev/net-next/c/59555a8d0dd3 https://git.kernel.org/netdev/net-next/c/6b4423b258b9 https://git.kernel.org/netdev/net-next/c/e9229ffd550b https://git.kernel.org/netdev/net-next/c/4e6bf609569c https://git.kernel.org/netdev/net-next/c/816ac3e6e67b https://git.kernel.org/netdev/net-next/c/16769a8923fa https://git.kernel.org/netdev/net-next/c/db2c7b353db3 https://git.kernel.org/netdev/net-next/c/fa817272c37e https://git.kernel.org/netdev/net-next/c/3bc8e0aff23b Fixes: f07fe36f22fc ("kernel: update flow offload patches to upstream version") Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel: Move an upstreamed patch under backportsMauri Sandberg2021-04-306-12/+18
| | | | | | | This CFI patch was accepted upstream for 5.13. Move it away from under ath79 and place under backports to be removed in due time. Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
* kernel: bump 5.4 to 5.4.115John Audia2021-04-301-1/+1
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.114John Audia2021-04-3014-36/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased* generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch Added new backport* generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch All others updated automatically. The new backport was included based on this[1] upstream commit that will be mainlined soon. This change is needed because Eric Dumazet's check for NET_IP_ALIGN (landed in 5.4.114) causes huge slowdowns on drivers which use napi_gro_frags(). Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional *Credit to Alexander Lobakin 1. https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=7ad18ff6449cbd6beb26b53128ddf56d2685aa93 Signed-off-by: John Audia <graysky@archlinux.us>
* ath79: mikrotik: swap RB922UAGS-5HPaCD eth0/1 MACsRoger Pueyo Centelles2021-04-301-0/+5
| | | | | | | | | | | Since support for SFP on the MikroTik RouterBOARD 922UAGS-5HPacD was added by 4387fe00cb, the MAC addresses for eth0 (Ethernet) and eth1 (SFP) were swapped. This patch fixes the 02_network script to assign MAC addresses correctly, so they match the label and the vendor's OS. Tested on a RouterBOARD 922UAGS-5HPacD board. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* kernel: backport mtk_ppe busy-wait loop fixIlya Lipnitskiy2021-04-291-0/+72
| | | | | | | | | | | Fixes logic that leads to this error when booting mt7621 and other devices that use the mediatek ethernet driver: [ 23.144378] mtk_soc_eth 1e100000.ethernet: PPE table busy Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c5d66587b8900201e1530b7c18d41e87bd5812f4 Fixes: f07fe36f22fc ("kernel: update flow offload patches to upstream version") Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ipq40xx: add support for MikroTik SXTsq 5 acRoger Pueyo Centelles2021-04-297-3/+269
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ath79: add missing kernel config symbolStijn Tintel2021-04-251-0/+1
| | | | | | | | | | Commit f724a583dcf7 updated the nand-rb4xx driver to the 5.10 testing kernel, but forgot to add the new kernel config symbol it introduces to the 5.10 config. Fixes: f724a583dcf7 ("ath79: mikrotik: update nand-rb4xx driver") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mediatek: bpi-r64: fix sdcard.img.gz in ImageBuilderDaniel Golle2021-04-231-1/+1
| | | | | | | | Generating the sdcard.img.gz file requires the initramfs/recovery image to be present. Use the newly introduced 'append-image-stage' build command to fix the ImageBuilder for the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: build AHCI driver as moduleDaniel Golle2021-04-231-1/+0
| | | | | | | | | Build the driver for the in-SoC AHCI SATA host as module, just like for the other subtargets. No board requires booting off SATA, so we don't need to have it built-in. All boards with SATA support already select kmod-ata-ahci-mtk which provides the module. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.32Rui Salvaterra2021-04-2212-66/+30
| | | | | | | | | | | | | | | | | | | | Deleted (reverse-appliable): mediatek/patches-5.10/360-mtd-rawnand-mtk-Fix-WAITRDY-break-condition-and-time.patch Automatically refreshed: ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch generic/pending-5.10/600-netfilter_conntrack_flush.patch generic/pending-5.10/613-netfilter_optional_tcp_window_check.patch generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: drop the conntrack rtcache patchRui Salvaterra2021-04-224-566/+8
| | | | | | | | | | It's in backports-5.4, but it wasn't ever merged. Upstream followed another approach, with flow offloading, which has much better performance. Drop this obsolete patch and refresh the kernel patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-2163-122/+4
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-2133-114/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: enable lzo, zlib and zstd in ubifsRui Salvaterra2021-04-212-4/+8
| | | | | | | | Make sure all compression algorithms are enabled, for the time being, in order not to break sysupgrade. In the future, we'd like to disable all except zstd, as it's the best all-around performer. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: default to zstd compression in ubifsRui Salvaterra2021-04-212-0/+50
| | | | | | | | | | Compared to both lzo and zlib, zstd is the best all-around performer. Backport a kernel patch [1] (to both 5.4 and 5.10), in order to set it as default for ubifs, if available. [1] https://lore.kernel.org/linux-mtd/CAFLxGvwhtRY-6kT-sN=AgjvyssHb5qdTS6WQHkhKu3YrPuTkdw@mail.gmail.com/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-04-211-1/+1
| | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move patch to backport after upstreamingIlya Lipnitskiy2021-04-201-4/+9
| | | | | | | | | The patch is now in net-next so keep it in backport-5.10 to keep things more organized. Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=6ecaf81d4ac6365f9284f9d68d74f7c209e74f98 Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel/generic: add missing config symbolStijn Tintel2021-04-191-0/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* gemini: Bump to kernel v5.10Linus Walleij2021-04-184-1/+600
| | | | | | | | | Only two patches against mainline remains. Switch to v5.10 which works very nicely with all Gemini devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [backported don't disable option CONFIG_BPF_SYSCAL] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* octeon: add 5.10 as testing kernelStijn Tintel2021-04-189-1/+478
| | | | | | | Remove upstreamed parts from 100-ubnt_edgerouter2_support.patch. Compile and runtime tested on Ubiquiti EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: fix at803x patchDavid Bauer2021-04-181-7/+7
| | | | | | | | | | This patch broke while refreshing on a kernel bump. It adds the config_aneg function twice to the AR8035 PHY now. Restore the old behavior to restore the patches original intent. Fixes commit 57e32650efa4 ("kernel: bump 5.10 to 5.10.31") Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: use alternative CID pathDavid Bauer2021-04-181-1/+1
| | | | | | | | | | Use an alternative path to access the CID of the SD card in MMC0, used for the generation of MAC addresses. With Kernel 5.10, the device name of the MMC controller changed, breaking MAC address generation. The new path is compatible with Kernel 5.4 as well as Kernel 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: add missing config symbolsDavid Bauer2021-04-181-0/+5
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: fix kernel 5.10 built for RockPi 4David Bauer2021-04-181-0/+10
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing config symbolsDavid Bauer2021-04-182-0/+13
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: amd-xgbe: add missing dependencies on 5.10Chuanhong Guo2021-04-181-1/+1
| | | | | | | | | fix the following build error when building with test kernel: Package kmod-amd-xgbe is missing dependencies for the following libraries: mdio_devres.ko Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* x86/64: Add support for AMD SOC Ethernet controllerZheng Bao2021-04-172-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is already supported in kernel. Add definition and configuration in Makefile of OpenWRT. It is tested on board Dibbler with processor V1605B. Dmesg is as below. -------------------------------------------- [ 0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 8.227270] libphy: amd-xgbe-mii: probed [ 8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled [ 8.228999] libphy: amd-xgbe-mii: probed [ 8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled ..... [ 11.760869] br-lan: port 1(eth0) entered blocking state [ 11.761365] br-lan: port 1(eth0) entered disabled state [ 11.762019] device eth0 entered promiscuous mode [ 11.785285] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full - flow control off [ 16.882108] br-lan: port 1(eth0) entered blocking state [ 16.882583] br-lan: port 1(eth0) entered forwarding state [ 16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ----------------------------------------------- Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
* ath79: mikrotik: update nand-rb4xx driverRoger Pueyo Centelles2021-04-174-12/+98
| | | | | | | | | | | | | | | This updates the NAND driver for MikroTik RB4XX series to work with kernel 5.10, similarly to the ar934x-nand driver (fb64e2c3). Support for kernel 5.10 was added to all ath79 subtargets except for the mikrotik one by commit d6b785d, since patch 920-mikrotik-rb4xx.patch needed to be reworked. Later, commit f8512661 enabled kernel 5.10 for the mikrotik subtarget with the nand-rb4xx driver still pending, which is updated and added back by this patch. Compile-tested only. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* mvebu: Fix sysupgrade for GL.iNet GL-MV1000Sven Eckelmann2021-04-171-0/+3
| | | | | | | | | | | The GL.iNet GL-MV1000 is booting from eMMC and the images for it are in theory sysupgrade compatible. But the platform upgrade scripts were not adjusted to select the mmcblock device as upgrade target. This resulted in a failed sysupgrade because the mtd device (NOR flash) was instead tried to be modified by the sysupgrade script. Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mvebu: armada 370: dts: fix the crypto engineDaniel González Cabanelas2021-04-172-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crypto engine in Armada 370 SoCs is currently broken. It can be checked installing the required packages for testing openssl with hw acceleration: opkg install openssl-util opkg install kmod-cryptodev opkg install libopenssl-devcrypto After configuring /etc/ssl/openssl.cnf to let openssl use the crypto engine for digest operations, and performing some checksums.. md5sum 10M-file.bin openssl md5 10M-file.bin ...we can see they don't match. There might be an alignment or size constraint issue caused by the idle-sram area. Use the whole crypto sram and disable the idle-sram area to fix it. Also disable the idle support by adding the broken-idle property to prevent accessing the disabled idle-sram. We don't care about disabling the idle support since it is already broken in Armada 370 causing a huge performance loss because it disables permanently the L2 cache. This was reported in the Openwrt forum and elsewhere by Debian users with different board models. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* ramips: replace mt7621s hack with upstream patchIlya Lipnitskiy2021-04-174-68/+80
| | | | | | | | | | | | | | Refresh patches. Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core MT7621 device (Netgear R6220). This change will make future kernel upgrades easier (avoids conflicts with upstream). Link: https://lore.kernel.org/lkml/20210407200738.149207-1-ilya.lipnitskiy@gmail.com/ Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Chuanhong Guo <gch981213@gmail.com>
* ramips: reduce spi-max-frequency for Xiaomi MI Router 4AGDavid Bentham2021-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Reduce spi-max-frequency for Xiaomi MI Router 4AG model Xiaomi MI Router 4AG MTD uses two flash chips (no specific on router versions when produced from factory) - GD25Q128C and W25Q128BV. These flash chips are capable of high frequency, but due to poor board design or manufacture process. We are seeing the following errors in the linux kernel bootup: `spi-nor spi0.0: unrecognized JEDEC id bytes: cc 60 1c cc 60 1c spi-nor: probe of spi0.0 failed with error -2` This causes the partitions not to be detected `VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6` Then creates a bootloop and a bricked router. The solution to limit this race condition is to reduce the frequency from 80 mhz to 50 mhz. Signed-off-by: David Bentham <db260179@gmail.com>
* archs38: set device vendor and model variablesMoritz Warning2021-04-171-0/+2
| | | | | | This fixes the profiles.json output. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* arc770: set device vendor and model variablesMoritz Warning2021-04-171-0/+2
| | | | | | This fixes the profiles.json output. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* kernel: Disable IXP4xx physmap by defaultLinus Walleij2021-04-171-0/+1
| | | | | | | | This makes no sense on anything but the IXP4xx platform that we do not even support anymore. If we bring it back, it can be selectively enabled for that platform only. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Disable CPU_THERMAL by defaultLinus Walleij2021-04-172-1/+1
| | | | | | | | | | | This config is for platforms that have: A) CONFIG_THERMAL set (we disable it by default) B) Has thermal zones that need to control cpufreq This is not suitable for default config, it needs to be enabled on a per-target basis in individual configs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Disable GPIO_CDEV_V1 by defaultLinus Walleij2021-04-171-0/+1
| | | | | | | | | We do not enable GPIO_CDEV so do not enable CDEV_V1 either. As we rebuild the whole userspace and kernel in OpenWRT it doesn't make any sense to support the old ABI anyway: the new one should be used by default. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Disable CONFIG_DMA_PERNUMA_CMA by defaultLinus Walleij2021-04-173-2/+1
| | | | | | | | | | | This CMA memory allocation option only applies to NUMA (Non-Uniform Memory Access) systems which are seldom the kind of systems that OpenWRT address. It is safe to assume that any system that need this option would turn it on locally. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Remove dead scheduler optionsLinus Walleij2021-04-171-4/+0
| | | | | | | | | The non-MQ CFQ, deadline and noop IO schedulers are deleted from the Linux kernel since commit f382fb0bcef4c37dc049e9f6963e3baf204d815c "block: remove legacy IO schedulers". Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: bump 5.4 to 5.4.113John Audia2021-04-171-3/+3
| | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. No manual intervention needed. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.112John Audia2021-04-179-381/+218
| | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed: mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Build system : x86_64 Build-tested : ipq806x/R7800 Run-tested : ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.111John Audia2021-04-173-3/+3
| | | | | | | | | | | | Refreshed with update_kernel.sh. No manual tweaks needed. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.31Rui Salvaterra2021-04-171-3/+3
| | | | | | | Automatically refreshed: ramips/patches-5.10/710-at803x.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: update spi-nor patchesDavid Bauer2021-04-163-111/+38
| | | | | | | Update the 4 bit BP patches for Ubiquiti boards with the second iteration sent upstream. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 18:43:42 +0000