aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add back the i2c-mt7621 moduleJohn Crispin2017-01-151-0/+16
| | | | | | mt7628/88 are still using this module. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Added Onion Omega2 and Omega2+Lazar Demin2017-01-158-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io) Specifications: - SoC: MediaTek MT7688AN (580MHz, ramips) - Omega2 - RAM: 64MB DDR - Storage: 16MB NOR SPI flash onboard - Omega2+ - RAM: 128MB DDR - Storage: 32MB NOR SPI flash onboard + microSD slot - Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter - Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port - Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock) - All Docks Provide: - Micro-USB port to provide power to the Omega - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial - USB 2.0 socket connected to Omega - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide: - Omega GPIO breakout - Allows for connection of Omega Expansions: - Ethernet Expansion - Relay Expansion - PWM Expansion - OLED Expansion - Ethernet Expansion - Proto Expansion - Cellular Expansion Signed-off-by: Lazar Demin <lazar@onion.io>
* ar71xx: Detect USB port on Mikrotik RB750UPJoão Chaínho2017-01-151-0/+3
| | | | | | The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* ramips: Add I2C driver to the default kernel configRosen Penev2017-01-153-23/+7
| | | | | | | | | | I made a commit that added the RTC driver to the kernel config with the intent that it would fix hctosys. Unfortunately while the RTC driver is in there, it's connected through I2C, the driver for which comes in module form and is thus loaded late. After this commit, it works fine. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* imx6: kernel: Backport serial port fixesPetr Štetiar2017-01-154-0/+249
| | | | Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport MIPS changes introducing a separate IRQ stackFelix Fietkau2017-01-1517-15/+312
| | | | | | | | Prevents crashes when IRQs arrive when the current kernel stack context already contains deeply nested function calls, e.g. when stacking lots of network devices on top of each other Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-1339-96/+91
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xburst: remove hack to determine entry pointFelix Fietkau2017-01-131-6/+1
| | | | | | xburst has CONFIG_BOOT_RAW set, so jumping to the load address is valid Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: remove hack to determine entry pointFelix Fietkau2017-01-131-5/+1
| | | | | | Malta has CONFIG_BOOT_RAW set, so jumping to the load address is valid Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: simplify etc/board.d/02_networkPaul Wassi2017-01-132-9/+5
| | | | | | | | | Unify switch configuration on Linksys WRTxx00AC series. LAN = eth0, WAN = eth1 Signed-off-by: Paul Wassi <p.wassi@gmx.at> [Álvaro]: also change WAN LEDs Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvsw61xx: add support for MV88E6352Imre Kaloz2017-01-132-0/+7
| | | | | | MV88E6352 is used on Linksys WRT3200ACM Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* mvebu: several fixes for Linksys WRT3200ACMÁlvaro Fernández Rojas2017-01-131-44/+40
| | | | | | | | - Fix WLAN LEDs definition. - Fix USB pinctrl definition. - Remove SDHCI definition. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mxs: gzip ext4 imagesFelix Fietkau2017-01-131-0/+3
| | | | | | Significantly reduces disk usage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: gzip rootfs image to save some spaceFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: gzip rootfs image to save some spaceFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: remove the clearfog-bundleFelix Fietkau2017-01-131-13/+1
| | | | | | It is obsoleted by proper SD card image support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: when using the new image build code, gzip ext4 images by defaultFelix Fietkau2017-01-131-1/+0
| | | | | | | | | This reduces the amount of hacks in the makefile code. Remove the apm821xx code to do the same - it was broken and left both compressed and uncompressed images in $(BIN_DIR) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: disable crashlogFelix Fietkau2017-01-131-0/+1
| | | | | | | | It could cause crashes with some forms of virtualization, and it is unlikely to work properly with most systems. It's safer to just disable it. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: disable a workaround for a buggy glibc versionFelix Fietkau2017-01-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: disable ext4 imagesFelix Fietkau2017-01-131-1/+1
| | | | | | They're pretty large and squashfs images tend to be more useful anyway Signed-off-by: Felix Fietkau <nbd@nbd.name>
* armvirt: add kernel config change missing from 0d44f0cbFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: default to external USB power on RB-912UAGFelix Fietkau2017-01-131-1/+1
| | | | | | | | | There's a GPIO that can switch between power to USB pins for the internal MiniPCIe slot or the external USB port. People are more likely to use the external one so enable it by default. Existing configurations should be unaffected Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/64: enable the fusion scsi driverFelix Fietkau2017-01-131-0/+6
| | | | | | | Is it used by VMware Fusion by default. This allows images to boot without further config changes in VMware. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* armvirt: enable the USB feature flagFelix Fietkau2017-01-131-1/+1
| | | | | | USB devices can be passed through from the host to the guest Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix WLI-TX4-AG300N boot and networkYo Abe2017-01-131-2/+11
| | | | | | | | | | | | | | | | Partition label "linux" prevents the root file system to be mounted at boot time leading to a kernel panic. After changing it to "firmware", the 2 uimage partitions "kernel", "rootfs" and squashfs "rootfs_data" are correctly recognized. The attached IP175C 10/100 MBit switch cannot connect to a link with fixed 1000Mbit speed. The correct link speed is 100MBit. The switch is detected and can be configured via mdio bus and should allow two separable VLANs to be configured for the 4 available ports. Signed-off-by: Yo Abe <abe.geel@gmail.com> [picked from openwrt/PR#330] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for VoCore2Andrew Yong2017-01-137-0/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the VoCore VoCore2 and its complementary "ultimate" dock. Specifications: - SoC: MediaTek MT7628AN (580MHz, ramips) - RAM: 128MB DDR2 166MHz - Storage: 16MB NOR SPI flash onboard + microSD slot on dock - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2 boards with onboard 1x chip antenna - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header - Dock hardware: - USB 2.0 socket - MicroSD socket - 100Mbps Ethernet x1 - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S DAC/ADC (support WIP) - Micro USB for power and console (UART2) Initial installation: - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on SSID "VoCore2" - Connect to VoCore2 by Ethernet or Wi-Fi - `ssh root@192.168.1.1` (password is "vocore") - scp/wget/etc. LEDE sysupgrade.bin to VoCore2 - `sysupgrade -n <your image>.bin` (don't keep old config, as the original firmware uses Ralink SDK Wi-Fi drivers and not mt76+mac80211) - after sysupgrade completes, Wi-Fi will be disabled by default so use Ethernet or the micro USB console to configure Wi-Fi again Signed-off-by: Andrew Yong <me@ndoo.sg>
* ar71xx: enable serial console on Mikrotik RB411/RB433David Varga2017-01-131-1/+3
| | | | | | | | | This patch adds support for serial console on Mikrotik RB411 and RB433 series devices. Signed-off-by: David Varga <duvi@duvinet.hu> [picked from FS#377] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rt3883: fix typo in pinctrl lna_g_funcDaniel Golle2017-01-131-0/+26
| | | | | | | | Spotted by forum users https://forum.openwrt.org/viewtopic.php?pid=347439#p347439 Reported-by: Tom Psyborg <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arc770: build dtb files in Image/Prepare so that they are available for Device/*Felix Fietkau2017-01-111-5/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: build dtb files in Image/Prepare so that they are available for ↵Felix Fietkau2017-01-111-5/+7
| | | | | | Device/* Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: backport upstream bcm53xx spi driver changesRafał Miłecki2017-01-113-41/+102
| | | | | | | One replaces our local patch and another is just for keeping driver in sync (license change). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: work around an ethernet tx scheduling fairness issueFelix Fietkau2017-01-111-0/+36
| | | | | | | | | | | The hardware queue scheduling is apparently configured with fixed priorities, which creates a nasty fairness issue where traffic from one CPU can starve traffic from all other CPUs. Work around this issue by forcing all tx packets to go through one CPU, until this issue is fixed properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: only add UBI EOF markers for devices that need itFelix Fietkau2017-01-111-1/+2
| | | | | | Fixes issues where the second-stage u-boot already uses UBI. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: disable sub-page writes on routerboard nand driversFelix Fietkau2017-01-113-0/+3
| | | | | | They seem to fail in tests using UBI, and are not used by yaffs2 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove linux 4.1 supportFelix Fietkau2017-01-11186-31550/+0
| | | | | | | The only target still referencing it is omap24xx, and it is marked as broken. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix legacy image build errorFelix Fietkau2017-01-111-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: fix parallel build issueFelix Fietkau2017-01-111-7/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: fix parallel build issueFelix Fietkau2017-01-111-7/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix RB4xx CPLD SPI device mode setupFelix Fietkau2017-01-111-1/+1
| | | | | | | | Commit af79fdbe4af3 changed the code to use tx_nbits for dual SPI tx transfers, however the SPI stack only allows this when the device mode includes the relevant bit as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix RB4xx SPI driver mode bitsFelix Fietkau2017-01-111-1/+1
| | | | | | Accept SPI_TX_DUAL in device mode to fix the CPLD driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport a MIPS SMP icache flush fixFelix Fietkau2017-01-111-0/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update bcm47xxpart failsafe partition patchesRafał Miłecki2017-01-115-37/+49
| | | | | | V2 using helper function was sent for upstream kernel Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add missing config symbolsJo-Philipp Wich2017-01-101-0/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add missing config symbolFelix Fietkau2017-01-101-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove gpiommc patches / driverFelix Fietkau2017-01-106-2706/+0
| | | | | | | This code was marked as incompatible to Linux 4.4 well over a year ago and nobody cared, and now it's breaking builds. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add pending bcm47xxpart support for failsafe TRX partitionRafał Miłecki2017-01-105-52/+316
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update spi-nor.h include fix with upstream accepted versionRafał Miłecki2017-01-101-2/+3
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: rename bcm47xxpart patches to fit more of themRafał Miłecki2017-01-102-0/+0
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: remove DEVTMPFS platform overridesFelix Fietkau2017-01-104-5/+0
| | | | | | Those options are handled via top-level menuconfig instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove DEVMEM/DEVKMEM platform overridesFelix Fietkau2017-01-107-7/+0
| | | | | | Those options are handled via top-level menuconfig instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 12:38:14 +0000