aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* kernel: backport GD25Q256 support from 4.15Kuan-Yi Li2020-12-0123-52/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport below changes for GigaDevice GD25Q256 support from v4.15: e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info 65153846b18c mtd: spi-nor: add support for GD25Q256 This chip is used on newer Quad-E4G boards. Before: [ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19 [ 2.372853] m25p80: probe of spi0.0 failed with error -2 After: [ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes) [ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0 [ 2.383043] Creating 5 MTD partitions on "spi0.0": [ 2.387824] 0x000000000000-0x000000030000 : "u-boot" [ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env" [ 2.400608] 0x000000031000-0x000000040000 : "config" [ 2.406830] 0x000000040000-0x000000050000 : "factory" [ 2.413169] 0x000000050000-0x000002000000 : "firmware" Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* kernel: bump 4.14 to 4.14.209Hauke Mehrtens2020-12-015-57/+37
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 804-i2c-support-layerscape.patch Compile-tested on: ipq40xx, ath79, layerscape/armv8_64b Runtime-tested on: ipq40xx, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: disable double-tagging for PSGMII devicesDavid Bauer2020-11-301-128/+0
| | | | | | | | | | | | | This commit disables the double tagging recently backported to 19.07. Operating the switch on the S-Tag had the advantage of being able to have separate VLANs for the same C-VID on LAN and WAN. However, this broke the ability to configure C-TAG modifications on the switch. Also performance took a significant toll. Fixes: commit 8c191712558c ("ipq40xx: fix ethernet vlan double tagging") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: mtd: parser: cmdline: Fix parsing of part-names with colonsSven Eckelmann2020-11-241-0/+63
| | | | | | | | | | | | | | | | | | | | | | | Some devices (especially QCA ones) are already using hardcoded partition names with colons in it. The OpenMesh A62 for example provides following mtd relevant information via cmdline: root=31:11 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(custom),64k(0:KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) rootfsname=rootfs rootwait The change to split only on the last colon between mtd-id and partitions will cause newpart to see following string for the first partition: KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) Such a partition list cannot be parsed and thus the device fails to boot. Avoid this behavior by making sure that the start of the first part-name ("(") will also be the last byte the mtd-id split algorithm is using for its colon search. Fixes: 9c718b5478ac ("kernel: bump 4.14 to 4.14.200") Signed-off-by: Sven Eckelmann <sven@narfation.org> (backported from commit 223eec7e81f8506592fc89cf79a2f14360f5c57b)
* ar71xx,ath79: refresh 910-unaligned_access_hacks.patchPetr Štetiar2020-11-242-2/+2
| | | | | | | | | Commit c9c7b4b3945c ("kernel: add netfilter-actual-sk patch") has touched net/ipv6/netfilter/ip6table_mangle.c which in turn has affected 910-unaligned_access_hacks.patch so the patch needs to be refreshed. Fixes: c9c7b4b3945c ("kernel: add netfilter-actual-sk patch") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add netfilter-actual-sk patchAaron Goodman2020-11-231-0/+234
| | | | | | | | Backport of linux kernel commit 46d6c5a to 4.14 kernel. netfilter: use actual socket sk rather than skb sk when routing harder Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
* layerscape: Fix check after kernel updateHauke Mehrtens2020-11-161-2/+7
| | | | | | | | The fsl_destroy_mc_io() function was moved, add the new checks to the moved copy and not just remove it. Fixes: ac5297340e64 ("kernel: bump 4.14 to 4.14.206") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.206Koen Vandeputte2020-11-1631-47/+52
| | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 210-dwc2_defaults.patch - 708-mc-bus-support-layerscape.patch Fixes: - CVE-2020-25656 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: remove wmac mtd-mac-address for UniFi AC familyRoger Pueyo Centelles2020-11-121-1/+1
| | | | | | | | | | | | | | | | | The MAC address for the wmac 2.4 GHz radio of the Ubiquiti UniFi AC family of devices is actually embedded in the mtd-cal-data, so there is no need for mtd-mac-address (which was incorrectly forcing wmac to have the same MAC as eth0). This makes it coherent with the stock firmware and the ar71xx target: · XX:XX:XX:X0:XX:XX eth0 · XX:XX:XX:X1:XX:XX ath0/wlan1 (2.4 GHz) · XX:XX:XX:X2:XX:XX ath1/wlan0 (5 GHz) Checked on a UniFi AC Mesh, a UniFi AC LR and a UniFi Lite. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 20ace70db65c3f1cb6a842d3092ac2eb7be81b5a)
* ath79: use correct firmware name for UniFi APDavid Bauer2020-11-111-4/+2
| | | | | | | | | | | The Ubiquiti UniFi AP does not have a AHB connected radio but a PCI one. Also the EEPROM ist only 0x440 bytes of length. Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net> Signed-off-by: David Bauer <mail@david-bauer.net> (backported from commit 4c5eb1040f94871626f6a533242c3a9c068d5bb6) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix logic level for DIR-645 buttonsDavid Bauer2020-11-111-2/+2
| | | | | | | | | | | | The D-Link DIR-645 currently uses an incorrect logic level for its buttons. Correct them in order to prevent unintentional activation of failsafe mode. Reported-by: Perry Melange <isprotejesvalkata@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 929e8f0f553637076f2612fb1c2225c5cee1f7ab)
* ath79: fix LED labels for PowerCloud CAP324Adrian Schmutzler2020-11-113-3/+6
| | | | | | | | | | The order of function and color in the labels in inverted for the LAN LEDs. Fix it. Fixes: 915966d86121 ("ath79: Port PowerCloud Systems CAP324 support") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 96023cd4ba66c33e77d9df562dda44b0a1ba1ac9)
* mvebu: Add bootscript for espressobin to support mainline firmwareAndre Heider2020-10-282-0/+38
| | | | | | | | | | | | | | | | | The generic bootscript is tailored around a downstream firmware and doesn't work on a firmware built from mainline components. Add a bootscript which: * sets $console since mainline u-boot doesn't do that * uses distro boot variables, so OpenWRT can be booted off any supported device when using a mainline firmware * sets missing distro boot variables for the downstream firmware Booting with a downstream firmware is unchanged. Booting with a mainline firmware now works. Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit c43b45863e38fb18a486601c1601f1485d649c0b)
* kernel: bump 4.14 to 4.14.202Koen Vandeputte2020-10-211-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.201Koen Vandeputte2020-10-149-19/+19
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2020-14386 Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* oxnas: fix qc_prep return in sata driver after kernel 4.14.200Adrian Schmutzler2020-10-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | This fixes a regression after a kernel change in 4.14.200 [1] that led to build failure on oxnas/ox820: drivers/ata/sata_oxnas.c:2238:13: error: initialization of 'enum ata_completion_errors (*)(struct ata_queued_cmd *)' from incompatible pointer type 'void (*)(struct ata_queued_cmd *)' [-Werror=incompatible-pointer-types] .qc_prep = sata_oxnas_qc_prep, ^~~~~~~~~~~~~~~~~~ drivers/ata/sata_oxnas.c:2238:13: note: (near initialization for 'sata_oxnas_ops.qc_prep') Our local driver is changed the same way as prototyped in the kernel patch, i.e. return type is changed and AC_ERR_OK return value is added. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=306a1c5b5683c1d37565e575386139a64bdbec6f Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit f6ca57e4f40528a8a0103c9f0e9647a2e11d10c3)
* kernel: bump 4.14 to 4.14.200Koen Vandeputte2020-10-1219-46/+46
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: ar8216: make switch register access atomicChuanhong Guo2020-10-111-0/+59
| | | | | | | | | | | | | | | | | | | | reg accesses on integrated ar8229 sometimes fails. As a result, phy read got incorrect port status and wan link goes down and up mysteriously. After comparing ar8216 with the old driver, these local_irq_save/restore calls are the only meaningful differences I could find and it does fix the issue. The same changes were added in svn r26856 by Gabor Juhos: ar71xx: ag71xx: make switch register access atomic As I can't find the underlying problem either, this hack is broght back to fix the unstable link issue. This hack is only suitable for ath79 mdio and may easily break the driver on other platform. Limit it to ath79-only as a target patch. Fixes: FS#2216 Fixes: FS#3226 Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit 86fdc8abed5992a74078b000b5ff9da723b6f46b)
* ath79: fix rssi-low LED for My Net Range ExtenderAdrian Schmutzler2020-09-281-1/+1
| | | | | | | | | | The LED color was missing in 01_leds. Fixes: 745dee11ac78 ("ath79: add support for WD My Net Wi-Fi Range Extender") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit d232a8ac7d1679f7ff97cbc66b4c49c940bd009f)
* kernel: Update to version 4.14.199Hauke Mehrtens2020-09-2842-201/+201
| | | | | | Compile and runtime tested on lantiq/xrx200 + ath79/generic. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ramips: ethernet: fix to interrupt handling"Jo-Philipp Wich2020-09-181-5/+6
| | | | | | | | | This reverts commit 7ac454014a11347887323a131415ac7032d53546. The change reportedly causes regressions in ethernet performance. Fixes: FS#3332 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: ethernet: fix to interrupt handlingNeilBrown2020-09-061-6/+5
| | | | | | | | | | | | | The current code acknowledged interrupts *after* polling. This is the wrong way around, and could cause an interrupt to be missed. This is not likely to be fatal as another packet, and so another interrupt, should come along soon. But maybe it is causing problems, so let's fix it anyway. Signed-off-by: NeilBrown <neil@brown.name> (Note that this matches the upstream driver.) Signed-off-by: Rosen Penev <rosenp@gmail.com>
* oxnas: reduce size of ATA DMA descriptor spaceDaniel Golle2020-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After years of trying to find the reason for random kernel crashes while both CPU and SATA are under load it has been found. Some odd commented-out #defines in kref's single-port driver [1] which were copied from the vendor driver made me develop a theory: The IO-mapped memory area for DMA descriptors apparetly got some holes just before the alignment boundaries. This feels like an off-by-one bug in the hardware or maybe those fields are used internally by the SATA controller's firmware. Whatever the cause is: they cannot be used and trying to use them results in reading back unexpected stuff and ends up with oopsing Unable to handle kernel paging request at virtual address d085c004 Work around the issue by reducing the area used for bmdma descriptors. This reduces SATA performance (iops) quite a bit, but finally makes things work reliably. Possibly one could optimize this much more by really just skipping the holes in that memory area -- however, that seems to be non-trivial with the driver and libata in it's current form (suggestions are welcome). The 'proper' way to have good SATA performance would be to make use of the hardware RAID features (one can use the JBOD mode to access even just a single disc transparently through the RAID controller integrated in the SATA host instead of accessing the SATA ports 'raw' as we do now). [1]: https://github.com/kref/linux-oxnas/blob/master/drivers/ata/sata_oxnas.c#L25 Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 5793112f751ee3d9f841af4846d68e6b1ff1bff4, including fixup commit d75e75306301852a848824cf268d8b58eda28a8a)
* kernel: Update kernel 4.14 to version 4.14.195Hauke Mehrtens2020-08-2742-102/+102
| | | | | | Compile and runtime tested on lantiq/xrx200 and x86/64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for TP-Link TL-WR710N v2.1Adrian Schmutzler2020-08-245-118/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the TP-Link TL-WR710N v2.1. It is basically a re-issue of the v1.2. Specifications: SoC: Atheros AR9331 CPU: 400 MHz Flash: 8 MiB RAM: 32 MiB WiFi: 2.4 GHz b/g/n Ethernet: 2x 100M ports USB: 1x 2.0 The only difference from the v1 is the TP-Link hardware ID/revision. Attention: The TL-WR710N v2.0 (!) has only 4 MB flash and cannot be flashed with this image. It has a different TPLINK_HWREV, so accidental flashing of the factory image should be impossible without additional measures. Unfortunately, the v2.0 in ar71xx has the same board name, so sysupgrade from ar71xx v2.0 into ath79 v1/v2.1 will not be prevented, but will brick the device. Flashing instruction: Upload the factory image via the OEM firmware GUI upgrade mechanism. Further notes: To make implementation easier if somebody desires to port the 4M v2.0, this already creates two DTSI files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Fabian Eppig <fabian@eppig.de> (backported from eb531337a779a48a2d17bc66f0d222325d6c1563)
* generic: platform/mikrotik: fix incorrect testThibaut VARÈNE2020-08-181-1/+1
| | | | | | | The test is meant to check the result of the preceding kmalloc() Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit d0498872ff71a79f0676cfc6b6b547c499bff712)
* ath79: enable gpio on ar933x by defaultAdrian Schmutzler2020-08-1812-46/+0
| | | | | | | | | | | | | | | | All other SoC DTSI files have gpio enabled by default, only ar9330/ar9331 disable it by default, only to have it enabled again afterwards for each individual device. So, do not disable it in the first place, and drop all device-specific status statements afterwards. Though this is a cosmetic commit, it might be a pitfall for device-support backporters if missing. Since backporting it is trivial, let's just do it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit dc1280ef652c6522269c7a864810c19362d33dc4)
* ath79: fix syntax error in ar7240_tplink_tl-wa.dtsiAdrian Schmutzler2020-08-171-1/+1
| | | | | | | | | | The node needs to be terminated by a semicolon. Fixes: 8484a764df20 ("ath79: ar724x: make sure builtin-switch is enabled in DT") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit e329e71c6915ffdf7fe99efc323a6de7867d0cbe)
* ath79: ar724x: make sure builtin-switch is enabled in DTAdrian Schmutzler2020-08-179-12/+8
| | | | | | | | | | | | | | | | | | | | On ar7240/ar7241 the mdioX node with the builtin-switch is enabled in the DTSI files, but the parent ethX node is left disabled. It only gets enabled per device or device family, and has not been enabled at all yet for the TP-Link WA devices with ar7240, making the switch unavailable there. This patch makes sure &eth0/&eth1 nodes are enabled together with the &mdio0/&mdio1 nodes containing the builtin-switch. For ar7240_tplink_tl-wa.dtsi, &eth0 is properly hidden again via compatible = "syscon", "simple-mfd"; This partially fixes FS#2887, however it seems dmesg still does not show cable (dis)connect in dmesg for ar7240 TP-Link WA devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 8484a764df20cdd673c74b583bfbf71e10c02726)
* ath79: WNR612v2: improve device supportMichal Cieslakiewicz2020-08-174-10/+18
| | | | | | | | | | | | | | | | | | This patch improves ath79 support for Netgear WNR612v2. Router functionality becomes identical to ar71xx version. Changes include: * software control over LAN LEDs via sysfs * correct MAC addresses for network interfaces * correct image size in device definition * dts: 'keys' renamed to 'ath9k-keys' * dts: 'label-mac-device' set to eth1 (LAN) * dts: formatting adjustments Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> (cherry picked from commit d74324e407de7fb641310070762923f7e4cd2d6c) [remove label-mac-device] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add LAN LEDs control bits for AR724x GPIO function pinmuxMichal Cieslakiewicz2020-08-171-1/+9
| | | | | | | | | | | | | | | | Currently AR724x pinmux for register 0x18040028 controls only JTAG disable bit. This patch adds new DTS settings to control LAN LEDs and CLKs that allow full software control over these diodes - exactly the same is done by ar71xx target in device setup phase for many routers (WNR2000v3 for example). 'switch_led_disable_pins' clears AR724X_GPIO_FUNC_ETH_SWITCH_LED[0-4]_EN bits. 'clks_disable_pins' clears AR724X_GPIO_FUNC_CLK_OBS[1-5]_EN and AR724X_GPIO_FUNC_GE0_MII_CLK_EN bits. These all should be used together, along with 'jtag_disable_pins', to allow OS to control all GPIO-connected LEDs and buttons on device. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> (cherry picked from commit 69df7eb73d9922e5e717b004aae06f93fe692dba)
* ramips: fix Xiaomi MiWiFi Mini switch definitionChih-Wei Chen2020-08-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | Based on OpenWRT Table of Hardware > Xiaomi > Xiaomi Mi WiFi Mini Switch Ports Defaults: 0, 1: LAN 4: WAN 6: CPU Port in Web GUI (word printed on bottom of case) WAN(Internet) map to switch port 4 LAN1(.) map to switch port 1 LAN2(..) map to switch port 0 CPU map to switch port 6 current setting is 1 WAN/ 4 LAN port, fix it. Signed-off-by: Chih-Wei Chen <changeway@gmail.com> [rebased after base-files split, fixed commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (backported from commit 3e88ab79b03917bc4b03b34db12edf622bde1de1)
* x86: Add CONFIG_EFI_CUSTOM_SSDT_OVERLAYSHauke Mehrtens2020-08-111-0/+1
| | | | | | | | | | The CONFIG_EFI_CUSTOM_SSDT_OVERLAYS option was added in kernel 4.14.188, set it for the x86/generic target. This fixes a build problem in the x86/generic target. Fixes: 148d59c67edd ("kernel: update kernel 4.14 to version 4.14.193") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: fix ZyXEL NBG6616 wifi switchChristoph Krapp2020-08-111-2/+2
| | | | | | | | The device uses a rf-kill switch instead of a button. Furthermore the GPIO is active high. Signed-off-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 0af656e978f1adac4061516d9d2e661e101ba64c)
* kernel: update kernel 4.14 to version 4.14.193Hauke Mehrtens2020-08-1121-137/+59
| | | | | | Compile and runtime tested on lantiq/xrx200 and ipq40xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: change u-boot-env to read-write for ZyXEL NBG6616Christoph Krapp2020-08-101-1/+1
| | | | | | | | | | As the ath79 port of this device uses a combined kernel + root partition the uboot bootcmd variable needs to be changed. As using cli/luci is more convenient than opening up the case and using a uart connection, lets unlock the uboot-env partition for write access. Signed-off-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 982c1f6e42c5b3e0f23eedd825a317a2872aa37b)
* ramips: correct WizFi630S pin mappingsTobias Welz2020-08-081-27/+8
| | | | | | | | | | | | WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu> (backported from commit d0b229f553a814b22c16976e40a197f892c0c0df) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: enable flashing WizFi630S via OEM firmwareTobias Welz2020-08-081-0/+1
| | | | | | | | | | | | WIZnet WizFi630s board name is written slightly different it its OEM OpenWrt firmware. This causes an incompatibility warning during flashing with sysupgrade. This patch is adding the vendor board name to the supported devices list to avoid this warning. For initial flashing you can use sysupgrade via command line or luci beside of TFTP. Do not keep the OEM configuration during sysupgrade. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit 816973f42aa47d910d3e35c2f8f8eb9d67416396)
* ramips: remove doublet entry in WizFi630S dts fileTobias Welz2020-08-081-4/+0
| | | | | | | | &wmac entry in WIZnet WizFi630S dts file was existing two times. This is removing one of them. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit b735bbcb1876196f33f044ed07325f8959a8967f)
* ramips: disable unused phy ports of WizFi630STobias Welz2020-08-081-0/+1
| | | | | | | | WIZnet WizFi630S is using only 3 of the phy ports. The unused phy ports draw unnecessarily power. This is disabling the unused phy ports. Signed-off-by: Tobias Welz <tw@wiznet.eu> (cherry picked from commit 36d4c2272ec65490232e70d45b945b9f467b78f0)
* mvebu: fix LAN/WAN port assignment on ClearFog Base/ProJosua Mayer2020-08-071-6/+6
| | | | | | | | | | | | | | | | | The comments in code already describe the intended lan / wan assignment: lan: switch wan: standalone ethernet and sfp Update the interface handles to match the comments, as observed with OpenWRT-19.07-rc2 on a Clearfog Pro Rev 2.0. This also matches the effective assignment on master, while the actual interface names (ethX) are different due to the reassignment in 06_set_iface_mac, which is included in 19.07 but was dropped for master. Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> [extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: restore support for boot console with arbitrary baud ratesSungbo Eo2020-08-021-0/+54
| | | | | | | | | | | | Commit 1bfbf2de6df9 ("ar71xx: serial: core: add support for boot console with arbitrary baud rates") added support for arbitrary baud rates which enabled 250000 baud rate for Yun. But the patch was not ported to kernel 4.9, and since then the kernel set its baud rate to 9600. This commit ports the patch to kernel 4.14, thereby restoring the serial console of Yun. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit c90db26e051e4f0e7cd32333b3bd8c94a13d599a)
* ath79: restore support for boot console with arbitrary baud ratesAdrian Schmutzler2020-08-021-0/+54
| | | | | | | | | | | | | | | The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 9600 Baud. With this patch Linux will use the configured baud rate and not a default one specified in uart_register_driver(). This has been added for ath79 4.19 and 5.4 in master as part of fc59b2f79b50 ("ath79: add support for Arduino Yun"), this backports it separately to 4.14. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: enable ethernet LED of Arduino YunSungbo Eo2020-08-021-2/+1
| | | | | | | | | Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was not added then. This commit fixes it by reverting the change on the LED. Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a5e404d1923d135d335e4ece83f87e6e891396e2)
* ar71xx: fix sysupgrade for Arduino YunSungbo Eo2020-08-021-1/+1
| | | | | | | | | | Commit bb46b635df48 changed its partition scheme, but sysupgrade image validation still uses the old format. This commit fixes it so that force flag is not needed for sysupgrade. Fixes: bb46b635df48 ("ar71xx: move Arduino Yun to generic building code") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 58dc1d0637425cfe023192466e6212009332b677)
* Revert "ar71xx: fix Arduino Yun enabling of level shifters outputs"Sungbo Eo2020-08-021-2/+2
| | | | | | | | | | This reverts commit 077253dd666a30ae5231c3748222d4b5b138593d. The output enable pins should be disabled by default, and only enabled when used. Otherwise unwanted conflicts might occur between MCU and SoC pins. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 43896dc0b005adfb512c027a27781c971440d415)
* ramips: add kmod-usb-dwc2 to ZyXEL Keenetic imageAlexey Dobrovolsky2020-08-021-1/+2
| | | | | | | | | | | | ZyXEL Keenetic has a USB port. Thus, DWC2 USB controller driver should be in the default image for this device. Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz> (backported from commit 0a182fcba6d9cb2cf74cae9114ea4770ef928f75) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove patches for USB-dwc2Alexey Dobrovolsky2020-08-021-29/+0
| | | | | | | | | | | | | | | In FS#2738 we can see that patch first introduced in e8ebcff ("ramips: add a explicit reset to dwc2") breaks USB functionality since 18.06. Thus, this patch should be removed. Removed: - 0032-USB-dwc2-add-device_reset.patch Fixes: FS#2738 Fixes: FS#2964 Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> (cherry picked from commit ab841b4393a4077a5819da1da040ab9a89e3b69d)
* mediatek: mt7623: fix sysupgrade from vendor OpenWrt on UniElec U7623David Woodhouse2020-07-303-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board ships with an ancient 14.07-based OpenWrt using block2mtd, and the MBR partition table contains nonsense. It is possible to sysupgrade to an upstream OpenWrt image, but the legacy layout of the OpenWrt images start at 0xA00 in the eMMC, with a raw uImage. The legacy OpenWrt image doesn't "own" the beginning of the device, including the MBR and U-Boot. This means that when a user upgrades to upstream OpenWrt, it doesn't boot because it can't find the right partitions. So hard-code them on the kernel's command line using CONFIG_CMDLINE_PARTITION (for block). Additionally, the vendor firmware doesn't cope with images larger than about 36MiB, because it only overwrites the contents of its "firmware" MTD partition. The current layout of the legacy image wastes a lot of space, allowing over 32MiB for the kernel and another 10MiB for the FAT recovery file system which is only created as 3MiB. So pull those in to allow 4¾ MiB for the kernel, 3MiB for recovery, and then we have over 20MiB for the root file system. This doesn't affect the new images which ship with a full eMMC image including a different MBR layout and a partition for U-Boot, because our modern U-Boot can actually pass the command line to the kernel, and the built-in one doesn't get used anyway. Tested by upgrading from vendor OpenWrt to the current legacy image, from legacy to itself, to the previous legacy layout, and then to finally the full-system image. Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit 6eb63019afef89404899f2cb65fb4c16e00aa0ed)
* mediatek: mt7623: add explicit console= to U7623 kernelDavid Woodhouse2020-07-301-1/+1
| | | | | | | | The bootloader for legacy builds can't set it, so we end up unable to log in on the serial port. Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit ea9ef8c9451a08aa4dbb6efcbe5f20d9b788ebd2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 14:19:41 +0000