aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: enable LZMA loader to fix Linksys RE6500 bootMark King2022-10-031-0/+1
| | | | | | | | | | | | At some point after 21.02.3 and before 22.03.0, the size limits of the Linksys RE6500 were reached and prevent booting from the 22.03.0 release or builds of current SNAPSHOT. This patch allows builds of master to boot again and has been tested on my device. Fixes: #8577 Signed-off-by: Mark King <mark@vemek.co> (cherry picked from commit bf5b1a53d4ff3f1d742f9ece1ab16555280417ec)
* toolchain: Select USE_SSTRIP with external musl toolchainHauke Mehrtens2022-10-031-1/+0
| | | | | | | | | | When we use the internal toolchain USE_SSTRIP will be selected by default for musl libc and USE_STRIP when glibc is used. Do the same when an external toolchain is used. USE_GLIBC will also be set for external toolchain builds based on the EXTERNAL_TOOLCHAIN_LIBC_USE_GLIBC setting. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9403810c020cca136149973a3929bf77a1f501aa)
* bcm53xx: backport clk driver fix for DT nodes namesRafał Miłecki2022-10-032-62/+72
| | | | | | | It allows dropping downstream patch renaming DT nodes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 77d9cce604d32005ddb90e91c6cc9b9cf35068d7)
* ath79: fix LibreRouter-v1 watchdog and poe_passSantiago Piccinini2022-10-021-0/+4
| | | | | | | Watchdog and poe_passthrough gpios require the jtag disabled. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net> (cherry picked from commit 2ad949b11dbaa4c634868d55a4452d5a558776bd)
* build: fix warnings from grepChris Osgood2022-09-291-1/+1
| | | | | | | | | | Fixes build warnings when using newer versions of grep. Signed-off-by: Chris Osgood <chris_github@functionalfuture.com> Tested-by: Georgi Valkov <gvalkov@gmail.com> (cherry picked from commit c5e167e0d6075c46ca92c30b425c4dcb05fec5ed) [ fix conflict error ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-271-1/+1
| | | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 3a8825ad6acbf18b2b472ace56be58868af78be7)
* mpc85xx: add patch to fix gpio mpc8xxxJosef Schlehofer2022-09-241-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backports Linux kernel patch [1] for kernel 5.10 where it applies cleanly. This was tested on CZ.NIC Turris 1.1 router running OpenWrt 22.03 release. Before: - In /var/log/messages: ``` [ 16.392988] lm90 0-004c: cannot request IRQ 48 [ 16.398280] lm90: probe of 0-004c failed with error -22 ``` - Sensors does not work: ``` root@turris:~# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. ``` After: ``` root@turris:/# sensors sa56004-i2c-0-4c Adapter: MPC adapter (i2c@3000) temp1: +44.0°C (low = +0.0°C, high = +70.0°C) (crit = +85.0°C, hyst = +75.0°C) temp2: +73.8°C (low = +0.0°C, high = +70.0°C) ALARM (HIGH) (crit = +85.0°C, hyst = +75.0°C) ``` [1] https://lore.kernel.org/linux-gpio/20220906105431.30911-1-pali@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 2f496c34b6dfbedbfbff8d2ade5d629f096e40bd) (c&p commit ID from openwrt's master) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm4908: fix -EPROBE_DEFER support in bcm4908_enetRafał Miłecki2022-09-212-1/+58
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1722e23ffcf9038114142a2129c29eb3cdec8ff9)
* kernel: update U-Boot NVMEM driverRafał Miłecki2022-09-213-0/+59
| | | | | | | | 1. Fix casting 2. Support DT-defined variables Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5652f378c6c607f99a15e6472cdca46c9c4b6162)
* bcm4908: backport mtd parser for Broadcom's U-Boot partitionRafał Miłecki2022-09-212-0/+138
| | | | | | | | Broadcom's U-Boot contains environment data blocks. They need to be found (offsets aren't predefined) to access env variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 137149847d0f374515f38952ce0986b03a97f2e4)
* mediatek: fix Unifi 6LR network configStijn Tintel2022-09-201-2/+1
| | | | | | | | | | | | | | | | | When the v1 and v2 variants of the U6LR were introduced, the board network config was not adapted to the new device names. Due to this, the wrong network config is applied during initial boot. The resulting config has lan, wan and a switch, while this device only has a single ethernet interface without a switch. Fix this by using a wildcard that matches all the variants. Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 117f41ee95ec445dce5ab9332bc27a6311747c0d)
* mpc85xx: fix unset kernel symbolsDavid Bauer2022-09-201-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: experimental improvements for MT7620 wifiDaniel Golle2022-09-1916-15/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [directly include v3 of the patchset submitted upstream] (cherry picked from commit 31a6605de04218e1c04bd5c2436c24d7d1c07506) (cherry picked from commit e785ca05e9f0502894772f5df92192b816ba5d7c) (cherry picked from commit 412fcf3d4400f84551f3ead0514834c62d94a251)
* mediatek: fix ledbar of UniFi 6 LR when running custom U-BootDaniel Golle2022-09-181-1/+2
| | | | | | | | | | | The RGB LED of the UniFi 6 LR v1 doesn't work when using the Openwrt- built U-Boot. This is because the vendor loader resets the ledbar controller while our U-Boot doesn't care. Add reset-gpio so the ledbar driver in Linux will always reset the ledbar controller. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 0b5cf952cf5b70d3af2424d05b15ce2730a3dc11)
* ramips: add support for Ubiquiti UniFi FlexHDSven Wegener2022-09-184-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- - SoC: MediaTek MT7621AT with 128 MiB RAM and 32 MiB Flash - Wi-Fi: MediaTek MT7603 (b/g/n, 2x2) and MediaTek MT7615 (ac, 4x4) - Bluetooth: CSR8811 (internal USB, install kmod-bluetooth) Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 820f0c07c544652c1c53a45262a481ac5dbe139b)
* ath79: Make patches apply againDaniel Golle2022-09-182-13/+13
| | | | | | | | | | The patch adding support for LEDs connected to a reset controller did not apply any more, refresh it on top of current master. Fixes: 53fc987b2552 ("generic: move ledbar driver from mediatek target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 76fc277917fc847892dbbf525aea9f90a035d296)
* generic: move ledbar driver from mediatek targetSven Wegener2022-09-183-3/+4
| | | | | | | This moves the ledbar driver to generic, to be also used by the ramips target. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 53fc987b25524c28525313347f0e2e5653dce43c)
* mediatek: add led countSven Wegener2022-09-181-1/+7
| | | | | | | | | | The LEDs connected to the MCU are so-called smart LEDs and their signal is daisy-chained. Because of this, the MCU needs to be told how many LEDs are connected. It also means the LEDs could be individually controlled, if the MCU has a command for this. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 76198e8f09a607c6aca2621f59d7a4cd7f6653e3)
* mediatek: add initialization after resetSven Wegener2022-09-181-0/+14
| | | | | | | | | During GPIO initialization the pin state flips and triggers a reset of the ledbar MCU. It needs to be moved through an initialization sequence before working correctly. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 013a956f086dc5d88f6e9cbd852ed4d900d436e0)
* mediatek: add support for reset gpioSven Wegener2022-09-181-0/+26
| | | | | | | | Some versions of the ledbar MCU have a reset pin. It needs to be correctly initialized or we might keep the MCU in reset state. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 84e4bbf5f049cdb862eb25c446bd6973ed4238aa)
* mediatek: support reading more than one byte of responseSven Wegener2022-09-181-7/+8
| | | | | | | There are commands that return more than one byte of response. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 7c852e7df50e370b26b060c96c3cc4491cee88eb)
* mediatek: cast literal value to charSven Wegener2022-09-181-1/+1
| | | | | | | | | | | Or the comparison against a signed char is always true, because the literal 0xaa is treated as an unsigned int, to which the signed char is casted during comparison. 0xaa is above the positive values of a signed char and negative signed char values result in values larger than 0xaa when casted to unsigned int. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit e9a22ce2535c4a0faf83d5595304fe0e2c7bd1b2)
* mediatek: correctly log i2c responseSven Wegener2022-09-181-2/+2
| | | | | | | | The read response is in the i2c_response variable. Also use %hhx format, because we're dealing with a single char. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit c4f9f9b44c82ffeacd9d3c00ba07171c35831337)
* mediatek: remove gpiod_direction_output()Sven Wegener2022-09-181-2/+0
| | | | | | | It's already set to output with GPIOD_OUT_LOW. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit a188356484f434c72ea536d91d7f93f59c562eb5)
* mediatek: do not use gpiod_set_raw_value()Sven Wegener2022-09-181-2/+2
| | | | | | | The polarity of the signal is set in the device dts. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 56c2d15587dfe5285f1cf3bfb236c827bc446465)
* mediatek: fix typo in bpi-r64 image recipeDaniel Golle2022-09-181-1/+1
| | | | | | | | Janusz Dziedzic reported a typo introduced by a recent commit. Fix it. Fixes: 50c892d67b ("mediatek: bpi-r64: make initramfs/recovery optional") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 007c8809c1e888748af70c1b878f4d0105fe7531)
* mediatek: bpi-r64: make initramfs/recovery optionalDaniel Golle2022-09-181-2/+7
| | | | | | | | | | Only include recovery image in SD card image generated for the BananaPi BPi-R64 if building with CONFIG_TARGET_ROOTFS_INITRAMFS This allows to build images larger than 32 MB (the limit for initramfs/recovery image) by deselecting initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 50c892d67bb4af90861be9fbb6831c2eeb62de11)
* ramips: fix GB-PC1 and GB-PC2 LEDsArınç ÜNAL2022-09-183-17/+15
| | | | | | | | | | | | | | | | Add the missing LEDs for GB-PC2. Some of these LEDs don't exist on the device schematics. Tests on a GB-PC2 by me and Petr proved otherwise. Remove ethblack-green and ethblue-green LEDs for GB-PC1. They are not wired to GPIO 3 or 4 and the wiring is currently unknown. Set ethyellow-orange to display link state and activity of the ethyellow interface for GB-PC2. Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf Tested-by: Petr Louda <petr.louda@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 2a6ef7f53d7b96e4ee0200196c28ed6b0a7c8465)
* kernel: bump 5.10 to 5.10.143John Audia2022-09-176-13/+13
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b77217d916ba48accbdb46589e6e5e3a9972c44e)
* kernel: bump 5.10 to 5.10.142John Audia2022-09-1711-23/+23
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 837fd23c80b22c566b40181a28630ac29af8f96e)
* kernel: bump 5.10 to 5.10.141John Audia2022-09-1723-59/+59
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e8a62a1e6040de71bdcb1be1a1c30c064acbc059)
* kernel: bump 5.10 to 5.10.139John Audia2022-09-171-1/+1
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e0753c5d5cef5b03c60601364188afb262ccd02e)
* bcm53xx: update NVMEM driver for NVRAMRafał Miłecki2022-09-144-5/+230
| | | | | | | Include support for NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 2f50c53f1772f24e4687e960e21c5b392fb522f0)
* kernel: backport mtd dynamic partition patchChristian Marangi2022-09-137-6/+112
| | | | | | | | | | | | Backport upstream solution that permits to declare nvmem cells with dynamic partition defined by special parser. This provide an OF node for NVMEM and connect it to the defined dynamic partition. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1a9ee367343edce263f82cc91a49d796c9d45ea3)
* ipq40xx: add GL-AP1300 label-mac-deviceDavid Bauer2022-09-111-0/+1
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 470ca65bda154fb5a601c6bbe20e20646535563f)
* ipq40xx: add WAN LED mapping for GL-AP1300David Bauer2022-09-111-0/+3
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4d014a7bd6d8fbfe7dc4cebd6c55d85601231fa4)
* rockchip: add system-LED aliases specific to OpenWrtDavid Bauer2022-09-101-0/+16
| | | | | | | | Add the aliases sections required to detect LEDs specific to OpenWrt boot / update indication for the NanoPi R4S. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1588069612f5db0720cbb942a6f8787878c223c3)
* rockchip: ensure NanoPi R4S has unique MAC addressDavid Bauer2022-09-101-5/+28
| | | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R4S boards is assigned unique for each board. FriendlyElec ship two versions of the R4S: The standard as well as the enterprise edition with only the enterprise edition including the EEPROM chip that stores the unique MAC address. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R4S#Differences_Between_R4S_Standard_Version_.26_R4S_Enterprise_Version Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit b5675f500daff3ef3f904e53a5566aa7dc09b786)
* realtek: fix RTL839x receive tag decodingBjørn Mork2022-09-091-2/+2
| | | | | | | | | | The previous fixup was incomplete, and the offsets for the queue and crc_error cpu_tag bitfields were still wrong on RTL839x. Fixes: 545c6113c93b ("realtek: fix RTL838x receive tag decoding") Suggested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ipq40xx: add LTE packages for GL-AP1300David Bauer2022-09-091-1/+1
| | | | | | | | Add LTE packages required for operating the LTE modem optionally shipped with the GL-AP1300. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c7c350922668e262068c9301b75434d7bb4b8d10)
* ath79: add support for ZTE MF281David Bauer2022-09-083-4/+296
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the ZTE MF281 battery-powered WiFi router. Hardware -------- SoC: Qualcomm Atheros QCA9563 RAM: 128M DDR2 FLASH: 2M SPI-NOR (GigaDevice GD25Q16) 128M SPI-NAND (GigaDevice) WLAN: QCA9563 2T2R 802.11 abgn QCA9886 2T2R 802.11 nac WWAN: ASRMicro ASR1826 ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1 Unpopulated connector next to SIM slot (SIM) GND - RX - TX - 3V3 Don't connect 3V3 BUTTON: Reset - WPS LED: 1x debug-LED (internal) LEDs on front of the device are controlled using the modem CPU and can not be controlled by OpenWrt Installation ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.1.66 to the ethernet port. Serve the OpenWrt initramfs image as "speedbox-2.bin" 3. Boot the initramfs image using U-Boot $ setenv serverip 192.168.1.66 $ setenv ipaddr 192.168.1.154 $ tftpboot 0x84000000 speedbox-2.bin $ bootm 4. Copy the OpenWrt factory image to the device using scp and write to the NAND flash $ mtd write /path/to/openwrt/factory.bin firmware WWAN ---- The WWAN card can be used with OpenWrt. Example configuration for connection with a unauthenticated dual-stack APN: network.lte=interface network.lte.proto='ncm' network.lte.device='/dev/ttyACM0' network.lte.pdptype='IPV4V6' network.lte.apn='internet.telekom' network.lte.ipv6='auto' network.lte.delay='10' The WWAN card is running a modified version of OpenWrt and handles power-management as well as the LED controller (AW9523). A root shell can be acquired by installing adb using opkg and executing "adb shell". Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1e1695f959e678868bb7911d059b847f38fc9cf4)
* realtek: fix RTL838x receive tag decodingBjørn Mork2022-09-081-3/+6
| | | | | | | | | | | | | | | | | | | | Commit dc9cc0d3e2a1 ("realtek: add QoS and rate control") replaced a 16 bit reserved field in the RTL83xx packet header with the initial cpu_tag word, shifting the real cpu_tag fields by one. Adjusting for this new shift was partially forgotten in the new RX tag decoders. This caused the switch to block IGMP, effectively blocking IPv4 multicast. The bug was partially fixed by commit 9d847244d9fd ("realtek: fix RTL839X receive tag decoding") Fix on RTL838x too, including correct NIC_RX_REASON_SPECIAL_TRAP value. Suggested-by: Jan Hoffmann <jan@3e8.eu> Fixes: dc9cc0d3e2a1 ("realtek: add QoS and rate control") Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 545c6113c93bbf7de1b0e515141a4565f7e6cece)
* bcm27xx: make NVMEM driver patch apply againRafał Miłecki2022-09-041-6/+7
| | | | | Fixes: 4efa0b70d54f1 ("kernel: backport U-Boot environment data NVMEM driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: enable NVMEM U-Boot env data driverRafał Miłecki2022-09-031-0/+3
| | | | | | | It's needed for devices with U-Boot bootloader. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit fb47b9fa1aa760de58f1b43d9f3e654acf1f1671)
* kernel: backport U-Boot environment data NVMEM driverRafał Miłecki2022-09-036-10/+361
| | | | | | | It parses U-Boot env data into NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 34cf31043504473df3174a22d163b71b75e46542)
* kernel: backport mtd patch adding of_platform_populate() callsRafał Miłecki2022-09-033-8/+81
| | | | | | | This is required for non-parser drivers handling MTD devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 41e1e838fbbb0308ad7353a3714e04b8c4585e7e)
* mediatek: mt7622: fix DTS compatible of UniFi 6 LR variantsDaniel Golle2022-09-033-3/+3
| | | | | | | | Make sure the compatible string in DTS matches the now v1/v2 differentiated board name in target/linux/mediatek/image/mt7622.mk. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit be555b9dd8618b8da68c42ae8dda493337519838)
* mediatek: mt7622: use variable sector size for spi-norDaniel Golle2022-09-031-0/+1
| | | | | | | Make use of minor sector size (4k) on supported SPI-NOR flash chips. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 51f4c8417819bc0ba6bc1808328478503e179fc4)
* mpc85xx: Drop pci aliases to avoid domain changesMartin Kennedy2022-09-026-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of upstream Linux commit 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias"), the PCIe domain address is no longer numbered by the lowest 16 bits of the PCI register address after a fallthrough. Instead of the fallthrough, the enumeration process accepts the alias ID (as determined by `of_alias_scan()`). This causes e.g.: 9000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11) 9000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ... to become 0000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11) 0000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ... ... which then causes the sysfs path of the netdev to change, invalidating the `wifi_device.path`s enumerated in `/etc/config/wireless`. One other solution might be to migrate the uci configuration, as was done for mvebu in commit 0bd5aa89fcf2 ("mvebu: Migrate uci config to new PCIe path"). However, there are concerns that the sysfs path will change once again once some upstream patches[^2][^3] are merged and backported (and `CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT` is enabled). Instead, remove the aliases and allow the fallthrough to continue for now. We will provide a migration in a later release. This was first reported as a Github issue[^1]. [^1]: https://github.com/openwrt/openwrt/issues/10530 [^2]: https://lore.kernel.org/linuxppc-dev/20220706104308.5390-1-pali@kernel.org/t/#u [^3]: https://lore.kernel.org/linuxppc-dev/20220706101043.4867-1-pali@kernel.org/ Fixes: #10530 Tested-by: Martin Kennedy <hurricos@gmail.com> [Tested on the Aerohive HiveAP 330 and Extreme Networks WS-AP3825i] Signed-off-by: Martin Kennedy <hurricos@gmail.com> (cherry picked from commit 7f4b4c29f3489697dca7495216460d0ed5023e02)
* at91bootstrap: use sdmmc0 as booting media for sama5d27_som1_ekClaudiu Beznea2022-09-021-2/+2
| | | | | | | | | | | Commit 0b7c66c ("at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig") changed default booting media for sama5d27_som1_ek board w/o any reason. Changed it back to sdmmc0 as it is for all the other Microchip supported distributions for this board (Buildroot, Yocto Project). The initial commit cannot be cleanly reverted. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> (cherry picked from commit e9f12931e60ee291cd7d2c8fd19a14682dae0197)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 11:59:47 +0000