aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: Fix VLAN limits for MT7621 GSWAntonis Kanouras2017-01-101-1/+5
| | | | | | | | | Without this patch swconfig will only allow setting up a total of 16 VLANs, with VLAN ID range of 0-15. Tested on ubnt-erx. Signed-off-by: Antonis Kanouras <antonis@metadosis.eu>
* ipq806x: fix pvs1_bin voltage in ipq8065 DTPavel Kubelun2017-01-101-7/+7
| | | | | | | | | | | | | | Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK. Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table. Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has correct values in DT, but in future a new device may choose n1 or n6. Without this change n1 is semi-correct and n6 is not available, because OPP driver disregards bins with voltage values that regulator cannot supply. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* lantiq: update USB controller initializationHauke Mehrtens2017-01-0911-95/+394
| | | | | | | | | | | | | This adds USB initialization fixes for Danube, Amazon SE and xrx300 and should fix the clock on at least Danube which hopefully closes FS#351. The xrx200 usb driver now uses more memory for the dwc2 fifos, this was increased in the chip compared to ar9. This is based in part on the vendor documentation and the vendor code base as a reference. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix dma locking problems with SMPHauke Mehrtens2017-01-091-0/+152
| | | | | | | The DMA controller used only local locks, which will not lock the section against other CPUs, fix this by using spin locks. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: fix image boot ubifs compression optionFelix Fietkau2017-01-091-1/+1
| | | | | | --force-compr was added by the xz compression patch, which is gone now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove ubifs xz decompression supportFelix Fietkau2017-01-0925-745/+0
| | | | | | | It has been unused, and less useful than squashfs for cases where flash space usage matters. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: drop patch-cmdline from base-filesFelix Fietkau2017-01-072-90/+0
| | | | | | It is no longer used for upgrading Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: switch to UBI, drop yaffs2 support, use sysupgrade for NANDFelix Fietkau2017-01-079-162/+105
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: convert to new loopback based overlay supportFelix Fietkau2017-01-073-36/+52
| | | | | | Disable block2mtd support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: minor kernel config improvementsDaniel Golle2017-01-071-1/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: require image metadataDaniel Golle2017-01-071-0/+1
| | | | | | | Now that we generate images with metadata attached, require it in order to prevent accidentally flashing the wrong image to a board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: remove some kprintf calls from NAND driverDaniel Golle2017-01-071-5/+0
| | | | | | They were added for debugging and I forgot to remove them. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: fix console print for additional boardsHauke Mehrtens2017-01-063-0/+12
| | | | | | | | | | | | | | I missed 3 boards in this commit: commit d8dde8c5178eba8c847dd48e7d06e6663ba1979f Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Wed Jan 4 21:53:22 2017 +0100 lantiq: fix console print Add bootargs parameters for ARV4525PW, ARV7506PW11 and ARV8539PW22 again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump to 4.4.40Hauke Mehrtens2017-01-0623-151/+46
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: add kernel module for AMD CS5535/CS5536 audio chipsetCezary Jackiewicz2017-01-061-0/+21
| | | | | | | | Add support for the integrated AC97 sound device on motherboards with AMD CS5535/CS5536 chipsets. Tested on Wyse Winterm S30. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* yaffs: fix to detect MLC/TLC NAND flashVladimir Zahradnik2017-01-062-2/+2
| | | | Signed-off-by: Vladimir Zahradnik <vladimir.zahradnik@gmail.com>
* lantiq: fix console printHauke Mehrtens2017-01-0535-4/+128
| | | | | | | | | | | | | | | | | | The boot loader of many boards provides a kernel boot argument with a broken console parameter to the kernel. This will be taken before the stdout-path defined in device tree and the serial will not work on this board. Multiple boards are affected by this problem, so revert this patch for all boards. Later we can remove the boot arguments from the device tree again, after the individual board was checked to work. This partly reverts this commit: commit 4995c64857a09c4cc92238ba0bd52cdb06c4c581 Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Date: Sun Dec 11 21:55:00 2016 +0100 lantiq: specify console using stdout-path instead of cmdline argument Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: add support for TP-Link WBS210/510Matthias Schiffer2017-01-058-8/+95
| | | | | | | The devices are mostly identical to the CPE210/510, but use external antennas. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* sunxi: use fwtool for checking sdcard imagesYousong Zhou2017-01-055-153/+19
| | | | | | | | | | | | | | To achieve this, device tree compatible string was used as boardname and the value of it will be checked against supported_devices list. It should be noted that we do not distinguish between sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts file. The other thing is that we need to gunzip the generated firmware to do fwtool check. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: add sysupgrade supportYousong Zhou2017-01-053-0/+91
| | | | | | | Enalbe builtin support for FAT filesystem as we need to mount boot partition to store sysupgrade.tgz there Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: make sdcard image with squashfs as rootfsYousong Zhou2017-01-051-1/+2
| | | | | | | | | | | | | Two things that need to be noted - There is no partition type id allocated for squashfs yet. In the case of sunxi, any non-zero value should work and we keep it 83 (the value for ext4) - Remaining spare space within the rootfs partition, not the entire sdcard space will be formated as either f2fs or ext4 and mounted as overlay to serve the role of rootfs_data. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: convert to new image generation methodYousong Zhou2017-01-0518-363/+171
| | | | | | | | | | | The new Device/xxx were transformed automatically from old profiles. Most device names are now taken from basename of the corresponding kernel device tree file. Device/sun5i-a13-olimex-som is an exception because it is not explicitly supported in the kernel yet and shares the same dts file with Device/sun5i-a13-olinuxino Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: export x86 platform upgrade functions to common.shYousong Zhou2017-01-052-96/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: enable loopback device and f2fs supportYousong Zhou2017-01-051-0/+14
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: fix dts name for Mele M9Yousong Zhou2017-01-051-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* x86: move sysupgrade.tgz only if it existsYousong Zhou2017-01-051-3/+6
| | | | | | | | To squash error messages at boot time mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: spi: allow setting chipselect gpio to sleepFelix Fietkau2017-01-051-0/+21
| | | | | | Fixes issues on some ar71xx MikroTik RouterBoard devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove a non-upstream spi core patchFelix Fietkau2017-01-055-208/+8
| | | | | | | - use standard flags instead - remove dead code from the rb4xx spi drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: use mkhash to replace various quirky md5sum/openssl callsFelix Fietkau2017-01-052-6/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: remove support for pre-4.4 kernels from driversDaniel Golle2017-01-044-63/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86/64: enable AES-NI support in kernelStijn Tintel2017-01-041-1/+2
| | | | | | | | | | | | | The kernel will detect if the host supports this, so we can just enable it in the kernel config. Tested on an APU2 with AES-NI support and a KVM VM on a Xeon E5520 host without AES-NI support. Throughput over an IPsec tunnel between these 2 hosts increased from ~63Mbps to ~140Mbps. Ciphers: AES_GCM_16_256/PRF_HMAC_SHA2_512/ECP_521. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm47xx: generic: include Ethernet drivers in standard imageRafał Miłecki2017-01-041-0/+5
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: drop some personal profilesRafał Miłecki2017-01-043-50/+0
| | | | | | | | | | | | | | WL500GPv1 profile included ath5k which made it usable only for people who decided to replace default BCM4318 card with Atheros one. We can't have profile for every possible configuration. If someone adjusts hw in such a way he can always install a proper package. WRTSL54GS profile got extra packages for a specific USB usage. Our standard profile provides basic USB and we should stick to this. We can't make everyone happy by including packages for all common USB use cases and all common filesystems. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: generic: drop standalone profiles duplicating device onesRafał Miłecki2017-01-042-33/+0
| | | | | | We have identical profiles for these devices thanks to DEVICE_PACKAGES. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: generic: specify DEVICE_PACKAGES for all devicesRafał Miłecki2017-01-041-0/+6
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: fix bgmac packageRafał Miłecki2017-01-041-2/+5
| | | | | | With all recent patches & changes it needs more modules. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* powerpc: boot: fix build with parallel makeJo-Philipp Wich2017-01-041-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc boot wrapper Makefile is not parallel build safe, causing fixdep to fail reading dependency files of the addnote, hack-coff and mktree utilities when concurrently building different image targets. A typical failure looks like: Building modules, stage 2. HOSTCC arch/powerpc/boot/addnote HOSTCC arch/powerpc/boot/hack-coff DTC arch/powerpc/boot/taishan.dtb HOSTCC arch/powerpc/boot/addnote HOSTCC arch/powerpc/boot/hack-coff MODPOST 800 modules fixdep: error opening depfile: arch/powerpc/boot/.hack-coff.d: No such file or directory scripts/Makefile.host:91: recipe for target 'arch/powerpc/boot/hack-coff' failed make[5]: *** [arch/powerpc/boot/hack-coff] Error 2 make[5]: *** Waiting for unfinished jobs.... fixdep: error opening depfile: arch/powerpc/boot/.addnote.d: No such file or directory scripts/Makefile.host:91: recipe for target 'arch/powerpc/boot/addnote' failed make[5]: *** [arch/powerpc/boot/addnote] Error 2 rm arch/powerpc/boot/taishan.dtb arch/powerpc/Makefile:263: recipe for target 'cuImage.taishan' failed make[4]: *** [cuImage.taishan] Error 2 make[4]: *** Waiting for unfinished jobs.... Add a GNU make specific .NOTPARALLEL pseudo rule to enforce sequential building of the addnote, hack-coff and mktree executables. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: mips74k: specify DEVICE_PACKAGES for all devicesRafał Miłecki2017-01-041-0/+39
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: legacy: specify DEVICE_PACKAGES for all devicesRafał Miłecki2017-01-041-1/+29
| | | | | | | This allows more feature complete images. Of course it affect the size, e.g. enabling b43 bumped rootfs from 1569618 to 2029122 for me. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: mtd: add lock/unlock support for f25l32paVictor Shyba2017-01-031-0/+24
| | | | | | | This chip has write protection enabled on power-up, so this flag is necessary to support write operations. Signed-off-by: Victor Shyba <victor1984@riseup.net>
* generic: mtd: backport SPI_NOR_HAS_LOCKVictor Shyba2017-01-0332-183/+178
| | | | | | | | | This flag was added to 4.9 with upstream commit 76a4707de5e18dc32d9cb4e990686140c5664a15. Signed-off-by: Victor Shyba <victor1984@riseup.net> [refresh and adjust platform patches, fix commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* layerscape: add ls2088ardb device supportYutang Jiang2017-01-0313-0/+2094
| | | | | | | | | | | | | | | | | | | The QorIQ LS2088A processor is built on the Layerscape architecture combining eight ARM A72 processor cores with advanced, high-performance datapath acceleration and network, peripheral interfaces required for networking, telecom, wireless infrastructure, aerospace applications and general-purpose embedded applications. Features summary: - Eight 64-bit ARM v8 Cortex-A72 CPUs - Two 64-bit DDR4 SDRAM memory controller with ECC - One 32-bit DDR3 SDRAM memory controller with ECC - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces - IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add ls1088ardb device supportYutang Jiang2017-01-0390-0/+44749
| | | | | | | | | | | | | | LS1088A is an ARMv8 implementation combining eight ARM A53 processor cores. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. Features summary: - Eight 64-bit ARM v8 Cortex-A53 CPUs - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces - QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* ixp4xx: drop 3.18 config/patchesJohn Crispin2017-01-0242-9744/+0
| | | | | | the default has been 4.4 for a while now Signed-off-by: John Crispin <john@phrozen.org>
* generic: backport dwc2 kernel panic fixMathias Kresin2017-01-021-0/+24
| | | | | | | | In case the soft reset in dwc2_core_reset() timeouts, the hsotg->core_params are freed albeit it is owned by the core. This results into a kernel panic as shown in FS#351. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: MiWiFi Nano fixesL. D. Pinney2017-01-023-18/+31
| | | | | | | | | | | | | | | | Use the the dt-bindings macros and add the reset button. Set the correct polarity for the LEDs and drop the default state. Remove all trigger for the LEDs. According to the manual the LEDs are only used to show the operation state, where blue means normal operation. Use the MAC-Addresses stored in EEPROM for the ethernet and the wireless interface. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> [use leds only for boot status indication, add proper commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* oxnas: fix syntax in ox820-akitio.dtsHauke Mehrtens2017-01-021-0/+1
| | | | | | | | | | | | | | | | | This commit introduced a syntax error in ox820-akitio.dts which is fixed now: commit 5cde94d9ab577c5ab68fc71e15a05d1bda5041f2 Author: Daniel Golle <daniel@makrotopia.org> Date: Sat Sep 24 01:14:53 2016 +0200 oxnas: backport upstream NAND driver This caused the folowing error message in the build bot: Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error FATAL ERROR: Unable to parse input tree scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* oxnas: append metadata to sysupgrade imageDaniel Golle2017-01-011-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: backport upstream NAND driverDaniel Golle2017-01-0112-156/+5908
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: drop support for kernel 4.1Daniel Golle2017-01-0116-1013/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:52:19 +0000