aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add missing WZR-450HP2 patch from r43026 for 3.10Felix Fietkau2014-11-031-0/+39
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43175
* ar71xx: add support for Netgear WNR2000v4John Crispin2014-11-0310-1/+267
| | | | | | Signed-off-by: Michaël Burtin <mburtin@gmail.com> SVN-Revision: 43173
* ralink: add pci bidge node to mt7620a dts fileJohn Crispin2014-11-031-0/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43172
* ralink: fix wan port on whr-1166John Crispin2014-11-032-4/+22
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43171
* ramips: add support for Airlink101 AR670WJohn Crispin2014-11-038-3/+147
| | | | | | | | | | This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153
* kernel: add missing config symbol for 3.13+Felix Fietkau2014-11-023-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43152
* kernel: 3.18: fix config typoZoltan Herpai2014-11-021-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43150
* sunxi: update devtree name in network setup for pcduino3 as preparing for 3.18Zoltan Herpai2014-11-021-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43149
* bcm53xx: bcma: get IRQs also from device treeHauke Mehrtens2014-11-014-40/+305
| | | | | | | | | Add patches for getting the IRQ number for a device of the bcma bus that were send for upstream inclusion. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43148
* bcm53xx: set customized AUXCTLHauke Mehrtens2014-11-012-2/+30
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43146
* bcm53xx: activate early printkHauke Mehrtens2014-11-0110-8/+54
| | | | | | | | This makes it possible to activate early printk. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43145
* bcm53xx: refresh patchesHauke Mehrtens2014-11-0113-92/+9
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43144
* brcm47xx: add config for kernel 3.18Hauke Mehrtens2014-10-311-0/+179
| | | | | | | | This adds a kernel config for kernel 3.18 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43140
* kernel: add missing patch for AR8216_PHY_LEDSHauke Mehrtens2014-10-313-0/+39
| | | | | | | | | | The patch adding AR8216_PHY_LEDS was not ported to more recent kernel versions. Thank you swalker for spotting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43139
* kernel: refresh patchesHauke Mehrtens2014-10-312-9/+4
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43138
* kernel: 3.18: add some missing parts in 721-phy_packets.patchHauke Mehrtens2014-10-311-0/+31
| | | | | | | | | Some changes from the header file were not ported from older kernel. Thank you swalker for spotting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43137
* kernel: add some missing config optionsHauke Mehrtens2014-10-311-0/+42
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43136
* kernel: remove wrongly added SYS_HAS_DMA_OPS in r43134Hauke Mehrtens2014-10-312-11/+3
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43135
* kernel: add patch header and missing part in 132-mips_inline_dma_ops.patch againHauke Mehrtens2014-10-317-11/+82
| | | | | | | | | | | | The select SYS_HAS_DMA_OPS in CPU_CAVIUM_OCTEON was from the kernel patch in 3.13, but it is only included in kernel 3.14 and not in 3.13 and 3.18, add it again. Thank you swalker for spotting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43134
* mac80211: configuration: Better handling of LIB80211 configurationHauke Mehrtens2014-10-313-3/+39
| | | | | | | | Apply patch for kernel 3.10 from r43112 also in 3.12, 3.14 and 3.18. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43133
* kernel: kernel 3.18 fix compilation on mipsHauke Mehrtens2014-10-311-12/+4
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43130
* target/imagebuilder: remove obsolete !TARGET_ROOTFS_INITRAMFS dependencyFelix Fietkau2014-10-311-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43128
* kernel: add missing symbols for 3.18Zoltan Herpai2014-10-301-0/+8
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43121
* ralink: make sure a mii_bus is loaded before accesing its stateJohn Crispin2014-10-301-4/+4
| | | | | | | | this caused a crash on boot Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43120
* ralink: load mt7530 driver on the 3 buffalo unitsJohn Crispin2014-10-301-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43119
* ralink: mt7530 - force wan port upJohn Crispin2014-10-301-5/+14
| | | | | | | | some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43117
* vgv7519: fix profile, this board have a rt2800-pci boardJohn Crispin2014-10-301-2/+2
| | | | SVN-Revision: 43115
* ralink: fix mt7530 for newer silicon revisionsJohn Crispin2014-10-301-10/+7
| | | | | | | | latest mt7530 silicon seems to have a different phy id. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43113
* mac80211: configuration: Better handling of LIB80211 configurationJohn Crispin2014-10-291-1/+13
| | | | | | | | | | | | OpenWRT patch 255-lib80211_kconfig_hacks gives user possiblity to select LIB80211 dependant settings (LIB80211_CRYPT_*) without having LIB80211 selected which is wrong. My patch changes OpenWRT patch so LIB80211 is vissible and all LIB80211_CRYPT_* options selects LIB80211 automatically. Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com> SVN-Revision: 43112
* lantiq: vgv7519: fix board_config on dts, read mac address and setJohn Crispin2014-10-293-14/+16
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43109
* ramips: improve ralink ethernet driverJohn Crispin2014-10-291-458/+1434
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change list: * add tx scatter gather function. * add software rx vlan offload to let GRO work. * add jumbo frame support. because use build_skb so max MTU is 3812. * enable hardware tx vlan. * enable GRO and remove LRO. because it can improve performance and can work on forwarding. * enable/fix tx padding function. * let napi handle tx clean up. * support ethtool operation. now support message level, hardware status and coalesce. * ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it. Notes: * build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a. * TCP NAT performance improve. test with netperf. - rt2880(gigabit) from 5x to 12x Mbps. - rt3x5x from 6x to 94 Mbps. - rt5250 from 5x to 8x Mbps. - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame. - mt7620 still 94Mbps. * TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43108
* swconfig: last vs tailJohn Crispin2014-10-291-1/+1
| | | | | | | | sorry ..... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43107
* swconfig: "swconfig list" shows devices in reverse orderJohn Crispin2014-10-291-1/+1
| | | | | | | | | Boards that have more than one swconfig enabled switch will show the devices in reverse order when call swconfig list. Fix this by using list_add_tail(). Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43106
* ralink: fix switch config on mt7530 evbJohn Crispin2014-10-292-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43105
* ralink: fix a off by 4 bug in mt7530John Crispin2014-10-291-63/+112
| | | | | | | | 0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43104
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-297-0/+152
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotesJohn Crispin2014-10-291-3/+7
| | | | | | | | | | lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by detecting whether vdsl_cpe_control or dsl_cpe_control should be used. Also add missing quotes around shell string comparision. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43101
* brcm47xx: initial support for kernel 3.18Rafał Miłecki2014-10-2817-0/+1431
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43100
* kernel: add closing " to REGMAP_I2C's tristateHauke Mehrtens2014-10-273-3/+3
| | | | | | | | Thanks swalker for reporting. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43099
* bcm53xx: remove support for fpuHauke Mehrtens2014-10-271-1/+0
| | | | | | | | This SoC does not have a vfpv3 FPU. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43098
* bcm53xx: initial support for kernel 3.18Hauke Mehrtens2014-10-2730-0/+6385
| | | | | | | | This adds initial support for kernel 3.18. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43097
* kernel: add generic config for kernel 3.18Hauke Mehrtens2014-10-271-0/+4434
| | | | | | | | There are still many options missing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43096
* kernel: make the kernel 3.18 patches apply and boot on arm.Hauke Mehrtens2014-10-2738-618/+381
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 43095
* kernel: start working on 3.18 supportRafał Miłecki2014-10-27169-0/+26505
| | | | | | | | | | | This commit: 1) Copies 3.14 patches 2) Drops mainlined stuff 3) Modifies some patches to apply Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43093
* kernel: 3.14: use patch that is really upstreamed for hso 0af0:9200Rafał Miłecki2014-10-273-36/+353
| | | | | | | | Patch 060 we had in repo was never sent/accepted. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43091
* mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1John Crispin2014-10-261-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This works around a bootloader issue where every device has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch we read the macs from config-partition during initial network setup. We have 9 valid macs stored in the partition, the 1st two are used for the radios, 3 and 4 are now used for WAN/LAN. on an already setup / running device we can get the real macs with . /lib/functions.sh . /lib/functions/system.sh echo "LAN = $(mtd_get_mac_binary config 338)" echo "WAN = $(mtd_get_mac_binary config 344)" see: https://dev.openwrt.org/ticket/14714 from the ticket / user klondike: U-Boot passed this commit https://gitorious.org/0xlab-kernel/u-boot/commit/ecd1a09b81f2ed6e6ba7bd1d0bfb0cc3d0ea2ad0 http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I have been checking the contents of the dtb on the flash, this particular bit is quite revealing: ethernet@b0000 { #address-cells = <0x1>; #size-cells = <0x1>; device_type = "network"; model = "eTSEC"; compatible = "fsl,etsec2"; fsl,num_rx_queues = <0x8>; fsl,num_tx_queues = <0x8>; local-mac-address = [00 00 00 00 00 00]; ^^^^^^^^^^^^^^^^^ interrupt-parent = <0x2>; phy-handle = <0x3>; phy-connection-type = "rgmii-id"; ptimer-handle = <0x4>; queue-group@0 { #address-cells = <0x1>; #size-cells = <0x1>; reg = <0xb0000 0x1000>; rx-bit-map = <0xff>; tx-bit-map = <0xff>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; }; }; I also have been checking the live device map to find this: root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address 00000000 00 04 9f ef 01 01 |......| 00000006 root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address * root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address * My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided) falls back to the default MAC provided by the old code, the kernel then receives thee modified device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't. This can be seen at target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch The enetaddr is filled up by using the device tree data by the process_boot_dtb function and used by the platform_fixups function to set the eth0 address (by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ). But instead we should be used the device address which to my understanding is provided in the mtd. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43074
* ramips: fix filenames in PorayDualSize factory imagesJohn Crispin2014-10-261-2/+2
| | | | SVN-Revision: 43073
* vgv7519: support more recent board release with vrx288 v1.2John Crispin2014-10-261-1/+2
| | | | | | | | The existance of this new board has been confirmed and tested by the guy on this commit https://github.com/openwrt-vgv7519/uboot-bin/commit/76fdd8e638f81e324ffe77856481bd147398f6e8 SVN-Revision: 43072
* ar71xx: refresh 3.10 patchesFelix Fietkau2014-10-2414-83/+77
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43051
* kernel: refresh generic 3.10 patchesFelix Fietkau2014-10-2441-104/+100
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43050