aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
...
* mvebu: fix sysupgrade for Linksys WRT3200ACMVignesh Balasubramaniam2016-12-041-1/+1
| | | | | | | | | | | | | | | sysupgrade command fails due to missing U-Boot environment-processing binaries on sysupgrade ramdisk. The missing binaries result in the following output: Switching to ramdisk... Performing system upgrade... ash: /usr/sbin/fw_printenv: not found ash: fw_setenv: not found ash: touch: not found cannot find target partition Signed-off-by: Vignesh Balasubramaniam <vigneshb.hp@gmail.com>
* mvebu: fix image validation errorMathias Kresin2016-12-041-2/+2
| | | | | | | | The name from the Device define will be used in the metadata. Due to typo/different spelling, this name might not match the one exported in /lib/mvebu.sh. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix image validation errorsMathias Kresin2016-12-0415-15/+20
| | | | | | | The boards did not have the name set that is expected during metadata validation on sysupgrade. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix sdhci support on mt7621John Crispin2016-12-012-24/+10
| | | | | | the IRQ level was wrong. refresh the patch while at it. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: RB750Gr3: Add pwr LED and buzzer to DTSAndrew Yong2016-12-012-2/+13
| | | | | | | | | use pwr LED in diag.sh Expose unused pinmux pins as GPIOs export power LED and buzzer pins Use rb750gr3:blue:pwr LED in diag.sh for boot status instead of rb750gr3:green:usr Signed-off-by: Andrew Yong <me@ndoo.sg>
* ipq806x: add thermal sensor driverdissent12016-12-0116-13/+2293
| | | | | | | | Allows to check cpu temperature. Huge thanks to @hnyman for valuable assistance! Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: increase coherent dma pool sizePavel Kubelun2016-12-011-0/+52
| | | | | | | Cherry-picked and rebased from https://source.codeaurora.org/quic/qsdk/system/openwrt/tree/?h=korg/linux-3.4.y/release/arugula_bb_cs Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add enable reg and masks for PRNGPavel Kubelun2016-12-011-0/+25
| | | | | | Cherry-picked from https://source.codeaurora.org/quic/qsdk/system/openwrt/tree/?h=korg/linux-3.4.y/release/arugula_bb_cs Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* net: ar8327: modify some configuration of switchPavel Kubelun2016-12-012-4/+13
| | | | | | | | | | | | | | | | Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Enable flow control of LAN and WAN ports to get better performance. Setup pvid as 0 for all ports during initialisation to avoid confusion during system or switch INIT. Disable PORT MAC before config MAC to avoid it work abnormal. This change is for IR-054144, IR-057315. Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067 Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org> Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
* net: ar8216: address security vulnerabilities in swconfig & ar8216Pavel Kubelun2016-12-013-13/+32
| | | | | | | | | | | | | | | | | | | | | | | Imported from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/e1aaf7ec008a97311867f0a7d0418e4693fecfd4%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: net: ar8216: address security vulnerabilities in swconfig & ar8216 This patch does the following changes: *address the security vulnerabilities in both swconfig framework and in ar8216 driver (many bound check additions, and turned swconfig structure signed element into unsigned when applicable) *address a couple of whitespaces and indendation issues BUG=chrome-os-partner:33096 TEST=none Change-Id: I94ea78fcce8c1932cc584d1508c6e3b5dfb93ce9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/236490 Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Commit-Queue: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: prevent device duplication in ar8xxx_dev_listPavel Kubelun2016-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd7b89dd464a4afffa04ff2e17c771dfe95668cf%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: prevent device duplication in ar8xxx_dev_list If probe is called twice, once for PHY0 and a second time for PHY4, the same switch device will be added twice to ar8xxx_dev_list, while supposedly this list should have one element per hardware switch present in the system. While no negative impact have been observed, it does happen if a platform instanciates these two PHYs from device-tree, as an example. Change-Id: Iddcbdf7d4adacb0af01975b73f8e56b4582e894e Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/234790 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: hold ar8xxx_dev_list_lock during use_count--Pavel Kubelun2016-12-011-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c3fd96a7b87da23979d8569ce45447f8419ca303%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: hold ar8xxx_dev_list_lock during use_count-- It is possible for the remove() callback to run twice in parallel, which could result into --use_count returning only 1 in both cases and the rest of the unregistration path to never be reached. This case has never been observed in practice, but we will fix preventively to make the code more robust. BUG=chrome-os-partner:33096 TEST=none Change-Id: If09abe27fdb2037f514f8674418bafaab3cbdef6 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232870 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: replace sprintf() by scnprintf()Pavel Kubelun2016-12-011-2/+1
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd0c41c7b9327ce003f44df38ce42556fb177b17%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: replace sprintf() by scnprintf() BUG=chrome-os-partner:33096 TEST=none Change-Id: Ib82035c9f2769a86d3e90f9573a09e5700ff5676 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232829 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: remove unnecessary spinlocksPavel Kubelun2016-12-011-4/+0
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/541c15f8dd02ddce07e0a462a0c2572d8398bccc%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: remove unnecessary spinlocks BUG=chrome-os-partner:33096 TEST=none Change-Id: Ia1b51258504501863fd3298717cc923a1baf34ca Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232828 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: sync mib_work cancellationPavel Kubelun2016-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c05af20272059e149e2da2e1fa1fbd90c03ec979 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: sync mib_work cancellation ar8xxx_mib_stop() is called from ar8xxx_phy_remove(), so we want to make sure the work doesn't run after priv is freed / the device ceases to exist. BUG=chrome-os-partner:33096 TEST=none Change-Id: Iafb44ce93a87433adc4576e5fea5fda58d1f43a9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232827 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* ipq806x: refactor rpm clock controller patchesPavel Kubelun2016-12-018-87/+250
| | | | | | | | | | | | RPM clock controller driver had made its way upstream and previous approach of directly redoing a driver to support ipq806x is a no go anymore. Thus reverting mentioned patches to upstream state and renaming in correct patch numbering accordance. To make the driver work on ipq806x boards we introduce a custom patch. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* kernel: add missing config symbolsFelix Fietkau2016-12-011-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* docs: remove all refrences in Makefiles/scriptsMathias Kresin2016-11-301-1/+1
| | | | | | | | | | The SDK Makefile still trys to copy the docs folder which was removed with 882f4d2d63272abce8c1966983aa10178e2e971f. This causes an SDK build error. All other removals are just cleanup. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump to 4.4.35Kevin Darbyshire-Bryant2016-11-2948-306/+189
| | | | | | | | | | | Refresh patches on all 4.4 supported platforms. 077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch removed as now upstream. Compile & run tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* lantiq: drop obsolete patchMathias Kresin2016-11-291-31/+0
| | | | | | | | | | | | ifxhcd never had roothub support but since kernel 3.x it was expected that a roothub always exists. The patched fixed a null pointer deref in the usb subsystem because of the missing roothub. Since ifxhcd is gone, this whole patch isn't required any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use BT HomeHub 5 Type A OEM partition layoutMathias Kresin2016-11-294-35/+36
| | | | | | | | | | | | | | | | | | | | This way the on nand bad block table is preserved and used. Add support for nand OOB ECC checksums as well. It should fix all reported ubi errors, which were all related to bad nand blocks and a purged on nand bad block table. The existing ubi partition will be reused, which eliminates the need to touch the caldata during initial install. The BT u-boot has support for loading a kernel from an ubi volume. It isn't necessary any longer to replace the BT u-boot with a custom compiled one to use LEDE. It is required to restore the BT Firmware and install LEDE from scratch to switch to the new partition layout. An image for restoring the BT firmware and installing LEDE is provided at https://github.com/mkresin/lede/releases. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: backport kernel patch to pass of node to nand_dt_initMathias Kresin2016-11-292-2/+27
| | | | | | | | | | | | | | | | | | | Backport upstream commit a61ae81a1907af1987ad4c77300508327bc48b23. The actually purpose of the patch was to do some cleanup. As a side effect of this cleanup, the device node is now passed to nand_dt_init. This allows to use the common nand device tree properties - nand-bus-width - nand-on-flash-bbt - nand-ecc-mode - nand-ecc-step-size - nand-ecc-strength for the plat_nand driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop ath9k device tree binding & ath9k pci fixupMathias Kresin2016-11-291-304/+7
| | | | | | | | | | Due to the addition of the bindings to the ath9k driver, this code isn't used any longer. The fixup is now done by the owloader. Rename the ath_eep.c file to ath5k_eep.c to indicate that this files includes ath5k related code only. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use ath9k device tree bindings binding/owl-loaderMartin Blumenstingl2016-11-2914-141/+305
| | | | | | | | | | | | | | | | | This moves the extraction of the eeprom/calibration data to a hotplug firmware script. Additionally it modifies all .dts to configure ath9k directly from within the .dts. The owl-loader approach enables support on devices with exotic eeprom data locations (such as unaligned positions on the flash or data inside an UBI volume). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [add ath9k caldata mac address patcher] [fixes DGN3500 wifi mac] [fixes BTHOMEHUBV3A wifi mac] [set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: fix syntax error in /lib/ar71xx.shMatthias Schiffer2016-11-291-4/+4
| | | | | | | | Remove all comments in ubnt_xm_board_detect(), as it's not possible to add comments to specific lines of the case construct anyways. Fixes: 9a5801e7 "ar71xx: add model detection for UBNT Rocket Ti" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add model detection for UBNT Rocket TiMatthias Schiffer2016-11-291-1/+2
| | | | | Based-on-patch-by: Neal Oakey <neal.oakey@bingo-ev.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* brcm47xx: fix initramfs image build errorFelix Fietkau2016-11-291-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: merge cpu cache workaround patches into one, ensure they get ↵Felix Fietkau2016-11-292-177/+115
| | | | | | compiled out on mips74k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove squashfs-64k rootfs image from bin directory, the generic one ↵Felix Fietkau2016-11-291-1/+0
| | | | | | is enough Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove split kernel/rootfs images where the sysupgrade image can be ↵Felix Fietkau2016-11-291-17/+1
| | | | | | written to flash directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove 2MB flash variant of WP543Felix Fietkau2016-11-292-7/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove legacy devices that cannot be supported due to kernel ↵Felix Fietkau2016-11-292-38/+0
| | | | | | partition size limits Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove legacy gzip imagesFelix Fietkau2016-11-291-6/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete jffs2 image building codeFelix Fietkau2016-11-292-27/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: use upstream accepted bcm47xxpart parsing fixRafał Miłecki2016-11-281-0/+3
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: use upstream accepted fix for ARM core abortsRafał Miłecki2016-11-282-42/+75
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: add Falcon supportHauke Mehrtens2016-11-2720-1/+1494
| | | | | | | | | | | | This adds support for the Intel Falcon SoC for GPON. Support for the Falcon SoC was removed in commit c8218363951 svn rev: 40392 from OpenWrt, this commit adds it again. This patch adds a new subtarget for the Falcon SoC, but it still misses all the drivers needed to control the GPON part. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: add swconfig to the default packagesMathias Kresin2016-11-273-46/+28
| | | | | | | | | | | | The DEVICE_PACKAGES are not included in the initramfs image in case TARGET_PER_DEVICE_ROOTFS is set. This might produces initramfs images with a not working network configuration because of a missing swconfig. Workaround the issues by adding the essential swconfig package to the default packages selection and deselect swconfig for boards not having swconfig included before via device packages. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: fix button keys codes used in dtsMathias Kresin2016-11-2722-26/+27
| | | | | | Use keycodes that matches the intended use case based on the label. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add size checks/append metadata where missingMathias Kresin2016-11-273-30/+22
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Airlink AR670W factory imageMathias Kresin2016-11-272-8/+7
| | | | | | | Move the mkwrgimg build step to the makefile. It will be required by other boards as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mvebu: fix typo in image metadata supportMathias Kresin2016-11-271-2/+2
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: more dts cleanupMathias Kresin2016-11-278-110/+80
| | | | | | | | | | | | | | | | | | | | | | | Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this GPIO is mentioned in the GPL tarball, it doesn't do anything. The 2.4/5 GHz LEDs are connected to the wifi chips and not be controlled from the the userspace. Use the LEDs names/colours as they are used in the board manuals. Merge redundant LED configurations. Use the phy[0|1]tpt trigger for the wireless LEDs. Remove the workarounds for the not controllable wireless LEDs. Fix spi compatible strings and remove superfluous spi-max-frequency parameters. If there are two power leds, use one for indicating normal operation and one for failsafe/upgrade. Keep the on/off state of the main power led during boot. Use the usb pinmux settings from the nbg6817 gpl sources. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: clean up dts filesHenryk Heisig2016-11-279-284/+533
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the pinmux to the values found in the GPL tarballs of the boards. Remove pinmux which are is not used (like nand pinmux for spi flash boards). This allows to use the wan orange led of the C2600 which had a wrong pinmux before. Might fix buttons or leds of other boards as well. Fix the LED color and the ledswitch key code of the C2600. Rename the ledgnr to ledswitch. Add support for indication the boot state using LEDs to the D7800, NBG6817, R7500 and R7500v2. Change GPIO active to readable values in D7800, EA8500, R7500, R7500v2 and R7800. Change gpioexport to gpio pinmux. Add proper "drive strenght" to i2c4_pins and use it for RPM on C2600, D7800, EA8500, R7500, R7500v2. Remove pcie pinmux from D7800. Move pinctrl to correct place in NBG6817 and R7800. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* lantiq: specify the PCIe controller's interrupt, size and address cellsMartin Blumenstingl2016-11-261-2/+10
| | | | | | This allows adding devices to the PCIe controller in the .dts files. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: Register the device tree node with the PCIe controllerMartin Blumenstingl2016-11-261-1/+9
| | | | | | | This allows specifying PCI devices as children of the PCIe controller node to pass configuration data to them. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ramips: Add missing chunked-io directive to W2914NSV2.dtsiYong-hyu, Ban2016-11-261-0/+1
| | | | | | | | | Fix bug that LEDE failed to boot with this message: WARNING: CPU: 2 PID: 1 at drivers/spi/spi-mt7621.c:214 mt7621_spi_transfer_one_message+0x28c/0x620() Signed-off-by: Yong-hyu, Ban <perillamint@gentoo.moe>
* ramips: SamKnows SK-WB8 DTS cleanupAndrew Yong2016-11-261-11/+6
| | | | | | Use gpio.h definition of GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW. Remove unused backup partition to increase available JFFS space. As long as U-Boot env variable "bootcount" is < 3 (reset to 0 after boot by init script) SamKnow's U-Boot will not attempt to boot from the backup flash address (0xe30000). Signed-off-by: Andrew Yong <me@ndoo.sg>
* Revert "mvebu: simplify etc/board.d/02_network"Felix Fietkau2016-11-251-1/+5
| | | | | | | This reverts commit 539ae47103b7de5cecb1a94beab0acb97ef7df1d. According to reports, this introduces a regression on WRT3200ACM Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: remove kmod-ledtrig-usbdev from recently added devicesMathias Kresin2016-11-241-2/+2
| | | | | | None of the devices uses an usb led at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:20:14 +0000