aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addressesDENG Qingfang2020-04-042-7/+18
| | | | | | | | | | | | | | | | | The name of each user port should be eth0..4, instead of lan1..4 and there is no WAN port. Rename them to match the official firmware. To avoid conflict with the master port (gmac0), rename it to "dsa". The official firmware assigns MAC address in this way: eth0 = label mac eth1 = label mac + 1 ... eth4 = label mac + 4 Since we have switched to DSA, it's possible to use different MAC for each port. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: net-label supportDENG Qingfang2020-04-041-0/+34
| | | | | | Add support for renaming ethernet interfaces in DTS Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: switch kernel version to 5.4DENG Qingfang2020-04-041-0/+2
| | | | | | | After all dts and config changes, 4.14 no longer works on mt7621. Switch it to 5.4 directly. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: change default ramips_setup_interfaces configurationDENG Qingfang2020-04-041-63/+1
| | | | | | | Most of MT7621 boards have LAN1~4 and WAN, so make this as the default Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621 remove unused pinctrl groups in dtsDENG Qingfang2020-04-0412-12/+12
| | | | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [split commit, remove leftover uart3->gpio setup] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: update dts/defconfig for DSADENG Qingfang2020-04-0470-317/+1888
| | | | | | | | | | | update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: backport GPIO driver fixDENG Qingfang2020-04-042-0/+118
| | | | | | Backport 2 patches from linux-next to fix mt7621 GPIO driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update PCIe node in dtsiDENG Qingfang2020-04-041-14/+29
| | | | | | Update PCIe node in dtsi to match the new driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: backport PCIe driver fixes from staging-testDENG Qingfang2020-04-0420-0/+1730
| | | | | | Backport mt7621-pci/mt7621-pci-phy fixes from staging-test Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update pinctrl nodesDENG Qingfang2020-04-0466-156/+156
| | | | | | Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: convert GPIO dts refsDENG Qingfang2020-04-0470-374/+374
| | | | | | | The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: replace gpio/eth nodes in mt7621.dtsiDENG Qingfang2020-04-041-42/+94
| | | | | | | There's different gpio and ethernet drivers upstream for mt7621. Update these two nodes to match upstream dt bindings. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: refresh kernel configDENG Qingfang2020-04-041-52/+68
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: refresh patchesDENG Qingfang2020-04-0444-9770/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed/solved elsewhere upstream: - 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch - 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch - 0004-MIPS-ralink-add-MT7621-pcie-driver.patch - 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch - 0025-pinctrl-ralink-add-pinctrl-driver.patch - 0028-GPIO-ralink-add-mt7621-gpio-controller.patch - 0043-spi-add-mt7621-support.patch - 0045-i2c-add-mt7621-driver.patch - 0047-DMA-ralink-add-rt2880-dma-engine.patch - 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch - 0054-mtd-spi-nor-w25q256-respect-default-mode.patch - 0099-pci-mt7620.patch - 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch Removed because of the new NAND driver: - 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch - 0039-mtd-add-mt7621-nand-support.patch - 0040-nand-hack.patch Remove patch that no longer applies (needs rework): - 0034-NET-multi-phy-support.patch Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mtk-mmc: set correct DMA maskDENG Qingfang2020-04-041-1/+1
| | | | | | | | | | | Since commit f8c55dc ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") changed MIPS dma handling, the mmc driver fails because it doesn't have a dma mask is set. So set the correct dma mask. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move MTK MMC driver to files directoryDENG Qingfang2020-04-047-0/+0
| | | | | | | Move MTK MMC driver from "files-4.14" to "files" so kernel 5.4 can use it Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: copy patches and kernel config to 5.4DENG Qingfang2020-04-0450-0/+14495
| | | | | | Copy patches and kernel config to 5.4 for ramips Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* bcm53xx: refactor board.d code in 02_networkRafał Miłecki2020-04-031-94/+95
| | | | | | | | | | | 1. Use functions for cleaner code 2. Always execute WAN interface generic code Before this change WAN interface code wasn't executed on all devices due to an early "exit 0". Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* imx6: bootscript: use partition UUID for rootfs if possibleTim Harvey2020-04-031-14/+20
| | | | | | | | | | | | | Specifying root filesystem by device is non-deterministic for several reasons: - USB device unmeration order is not garunteeed for USB storage devs - MMC devs ordering is determined by the instance of the MMC host controller including non-storage SDIO devices which can throw off numbering depending on kernel versions. It is recommended to use partition UUID Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: switch to kernel 5.4Tim Harvey2020-04-031-2/+1
| | | | | | 5.4 is stable on Gateworks Newport GW610x/GW620x/GW630x/GW640x Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-04-031-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kmod-sched-cake: switch to in-tree cake for 4.19+Kevin Darbyshire-Bryant2020-04-015-0/+625
| | | | | | | | | | | | | | Use in tree version of cake for kernels 4.19+ and backport features from later kernel versions to 4.19. Unfortunately PROVIDES dependency handling produces bogus circular dependency warnings so whilst this package and kmod-sched-cake-oot should be able to PROVIDE kmod-sched-cake this doesn't work. Instead, remove the PROVIDES option and modify package sqm-scripts to depend on the correct module independently. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* oxnas: some improvements for Shuttle KD20Daniel Golle2020-03-313-7/+59
| | | | | | | | | * install kmod-hwmon-drivetemp by default * wire up thermal zone * fix fan GPIO polarity * fix i2c-gpio GPIO_OPEN_DRAIN Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: fix warning in SATA driverDaniel Golle2020-03-311-1/+1
| | | | | | | | | drivers/ata/sata_oxnas.c: In function 'sata_oxnas_port_irq': drivers/ata/sata_oxnas.c:2126:25: warning: left shift count >= width of type [-Wshift-count-overflow] if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) { ^~ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: fix DAP-2610 boot failurePetr Štetiar2020-03-311-0/+1
| | | | | | | | | | | | | Albert has reported, that his DAP-2610 wont boot with the latest snapshot and Fredrik has found out, that the device gets stuck at "Waiting for root device ..." due to missing 5.4 kernel config symbol CONFIG_MTD_SPLIT_WRGG_FW which was probably lost during the kernel version bump. Ref: https://forum.openwrt.org/t/dap-2610-bricked-help-needed Fixes: 272e0a702a2b ("ipq40xx: add v5.4 support") Suggested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86/64: add cdrom and iso9660 drivers李国2020-03-312-0/+8
| | | | | | | The iso image need cdrom and iso9660 drivers to boot, otherwise it will hang when mounting the root file system Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: generate EFI platform bootable images李国2020-03-318-18/+83
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: make some change to add efi platform support李国2020-03-311-5/+4
| | | | | | | | 1.generate boot image at Package/install section 2.move boot image to $(STAGING_DIR_IMAGE)/grub2/ 3.add efi variant to support efi platform Signed-off-by: 李国 <uxgood.org@gmail.com>
* bcm27xx: update 5.4 patches from RPi foundationÁlvaro Fernández Rojas2020-03-3184-6/+7955
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: mips: exclude more dsemul code when fpu-emu is not enabledYousong Zhou2020-03-301-0/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is backported from mips-next. In addition to minor reduction of code size and runtime memory use, the more apparent difference is that the delay slot emulation page will not be present for those targets with fpu emulation disabled (CONFIG_MIPS_FP_SUPPORT=n) Memory maps of busybox before and after this change root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77dc0000-77de2000 r-xp 00000000 00:02 273 /lib/libgcc_s.so.1 77de2000-77de3000 r-xp 00012000 00:02 273 /lib/libgcc_s.so.1 77de3000-77de4000 rwxp 00013000 00:02 273 /lib/libgcc_s.so.1 77de4000-77e7b000 r-xp 00000000 00:02 271 /lib/libc.so 77e8a000-77e8c000 rwxp 00096000 00:02 271 /lib/libc.so 77e8c000-77e8e000 rwxp 00000000 00:00 0 7fd86000-7fda7000 rw-p 00000000 00:00 0 [stack] 7fefd000-7fefe000 r-xp 00000000 00:00 0 7ffe6000-7ffe7000 r--p 00000000 00:00 0 [vvar] 7ffe7000-7ffe8000 r-xp 00000000 00:00 0 [vdso] root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77d55000-77d77000 r-xp 00000000 00:02 274 /lib/libgcc_s.so.1 77d77000-77d78000 r-xp 00012000 00:02 274 /lib/libgcc_s.so.1 77d78000-77d79000 rwxp 00013000 00:02 274 /lib/libgcc_s.so.1 77d79000-77e10000 r-xp 00000000 00:02 272 /lib/libc.so 77e1f000-77e21000 rwxp 00096000 00:02 272 /lib/libc.so 77e21000-77e23000 rwxp 00000000 00:00 0 7fe23000-7fe44000 rw-p 00000000 00:00 0 [stack] 7ff63000-7ff64000 r--p 00000000 00:00 0 [vvar] 7ff64000-7ff65000 r-xp 00000000 00:00 0 [vdso] Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: Enable CMOS RTC support on 5.4Kevin Darbyshire-Bryant2020-03-291-1/+1
| | | | | | | | | Enable kernel symbol CONFIG_RTC_DRV_CMOS which was enabled in 4.14 & 4.19 Fixes FS#2905 and now my APU2 picks up time from RTC Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: Deactivate NETGEAR WNCE2001 by defaultHauke Mehrtens2020-03-291-0/+1
| | | | | | | | | The root file system is getting too big for this device and this breaks the ramips/rt305x build. Do not build images for this board by default to fix this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: Don't diverge from upstream default HZ settings on 4.19Daniel Engberg2020-03-296-12/+4
| | | | | | | | | | | Most targets upstream use 250Hz or even 1000Hz by default while 100Hz is hardcoded in OpenWrt's default config. Use upstream default except for apm821xx which hardsets 1000Hz instead of platform default of 250Hz. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Apply same changes to 5.4] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: generic: 5.4: fix mtd concat panic on read/write functionsMichal Cieslakiewicz2020-03-291-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2431c4f5b46c32c4ac495456b1ef4ce59c0bb85d ("mtd: Implement mtd_{read,write}() as wrappers around mtd_{read,write}_oob()") for kernel 5.4 restrict mtd devices to register only one type of read/write functions (either generic or OOB). mtd concat does not follow above rule and defines both methods at the same time, causing this type of device to be rejected by kernel. For routers that use mtd concat for root UBI volume that means kernel panic and boot loop with following error: [ 0.767307] Creating 1 MTD partitions on "ubi-concat": [ 0.772547] 0x000000000000-0x000007500000 : "ubi" [ 0.777953] ------------[ cut here ]------------ [ 0.782683] WARNING: CPU: 0 PID: 1 at drivers/mtd/mtdcore.c:621 add_mtd_device+0x84/0x5f4 [ 0.790983] Modules linked in: [ 0.794093] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.24 #0 [ 0.799932] Stack : 80680000 8062af20 00000000 00000000 8062a0f0 87c2dae4 87c282fc 8065fd23 [ 0.808430] 805c64f4 00000001 807b32d8 80670000 80670000 00000001 87c2da98 25c15bcb [ 0.816909] 00000000 00000000 807e0000 0000006e 61696e74 00000000 2e342e32 34202330 [ 0.825397] 0000006e cef2ada7 00000000 000c1ded 00000000 00000009 00000000 8034de64 [ 0.833889] 00000009 80670000 80670000 80676d18 00000000 80320044 00000000 807b0000 [ 0.842381] ... [ 0.844861] Call Trace: [ 0.847367] [<80069994>] show_stack+0x30/0x100 [ 0.851913] [<8007e8ac>] __warn+0xc0/0x10c [ 0.856072] [<8007e954>] warn_slowpath_fmt+0x5c/0xac [ 0.861134] [<8034de64>] add_mtd_device+0x84/0x5f4 [ 0.866001] [<80352a50>] add_mtd_partitions+0xd8/0x1b8 [ 0.871231] [<803527b8>] parse_mtd_partitions+0x238/0x3f8 [ 0.876717] [<8034e51c>] mtd_device_parse_register+0x48/0x1b0 [ 0.882586] [<8038dd2c>] virt_concat_probe+0x170/0x1ec [ 0.887820] [<803334c8>] platform_drv_probe+0x40/0x94 [ 0.892970] [<80331638>] really_probe+0x104/0x35c [ 0.897766] [<80331d54>] device_driver_attach+0x70/0x98 [ 0.903072] [<80331ddc>] __driver_attach+0x60/0x100 [ 0.908042] [<8032f668>] bus_for_each_dev+0x68/0xa4 [ 0.912989] [<803309d4>] bus_add_driver+0x1f0/0x200 [ 0.917952] [<80332448>] driver_register+0x84/0x148 [ 0.922906] [<80060a1c>] do_one_initcall+0x7c/0x1dc [ 0.927870] [<80684e14>] kernel_init_freeable+0x158/0x23c [ 0.933361] [<805387d8>] kernel_init+0x10/0xf0 [ 0.937883] [<80064dd8>] ret_from_kernel_thread+0x14/0x1c [ 0.943375] ---[ end trace 62e0927fba490f68 ]--- [...] [ 2.266513] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.274893] Rebooting in 1 seconds.. This patch makes mtd concat to follow new mtd requirements by registering either normal or oob versions of read/write functions, but not both at the same time. OOB is used only when underlying mtd devices provide such functionality (like NAND chips) - otherwise generic methods are used. Tested successfully on Netgear WNDR4300. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* archs38: switch to kernel 5.4 by defaultEvgeniy Didin2020-03-291-1/+1
| | | | | | | | Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* archs38: Add patch for gcc8 compilanceEvgeniy Didin2020-03-291-0/+21
| | | | | | | | | | | | Building Linux kernel version 5.4.x with GCC8 ends up with internal compiler error. The workaround on this issue can be introdution of additional compiler option "--mmpy-option=2" Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* archs38: add kernel 5.4 configEvgeniy Didin2020-03-291-0/+285
| | | | | | | | | | | | Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> [run make kernel_oldconfig CONFIG_TARGET=target] [Do not deactivate CONFIG_NET_VENDOR_*] [Activate CONFIG_HARDENED_USERCOPY] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update arc-specific patchEvgeniy Didin2020-03-291-11/+11
| | | | | | | | | | | This patch updates arc-specific patch by moving declaration of struct object before it's usage. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* mvebu: cortexa9: correct cpu subtypeTomasz Maciej Nowak2020-03-281-1/+1
| | | | | | | | | | | | | | | Armada 370 processors have only 16 double-precision registers. The change introduced by 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for gcc 8.x") switched accidentally the toolchain for mvebu cortexa9 subtarget to cpu type with 32 double-precision registers. This stems from gcc defaults which assume "vfpv3-d32" if only "vfpv3" as mfpu is specified. That change resulted in unusable image, in which kernel will kill userspace as soon as it causing "Illegal instruction". Ref: https://forum.openwrt.org/t/gcc-was-broken-on-mvebu-armada-370-device-after-commit-on-2019-03-25/43272 Fixes: 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for gcc 8.x") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* tegra: correct cpu subtypeTomasz Maciej Nowak2020-03-281-1/+1
| | | | | | | | | | | | | | | Tegra 2 processors have only 16 double-precision registers. The change introduced by 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for gcc 8.x") switched accidentally the toolchain for tegra target to cpu type with 32 double-precision registers. This stems from gcc defaults which assume "vfpv3-d32" if only "vfpv3" as mfpu is specified. That change resulted in unusable image, in which kernel will kill userspace as soon as it causing "Illegal instruction". Ref: https://forum.openwrt.org/t/gcc-was-broken-on-mvebu-armada-370-device-after-commit-on-2019-03-25/43272 Fixes: 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for gcc 8.x") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* x86: fix missing squashfs and ext4 rootfs imagesPaul Spooren2020-03-281-2/+4
| | | | | | | | | | | | | | | The previous rework of x86 image creation done in commit cb007a7bf619 ("x86: switch image generation to new code") removed images of separate squashfs and ext4 filesystems which are handy for example in testing under QEMU. So this patch adds back creation of those missing rootfs images for ext4 and squashfs based filesystems. Fixes: cb007a7bf619 ("x86: switch image generation to new code") Signed-off-by: Paul Spooren <mail@aparcar.org> [commit subject and description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: fix padding in imagesPaul Spooren2020-03-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous rework of x86 image creation done in commit cb007a7bf619 ("x86: switch image generation to new code") broke the padding in images. sda: p2 size 212992 extends beyond EOD, enabling native capacity sda: p2 size 212992 extends beyond EOD, truncated sd 0:0:0:0: [sda] Attached SCSI disk SQUASHFS error: squashfs_read_data failed to read block 0x2cc556 unable to read id index table VFS: Cannot open root device "PARTUUID=ac5c9cd8-02" or unknown-block(8,2): error -5 Please append a correct "root=" boot option; here are the available partitions: 0800 19761 sda driver: sd 0801 16384 sda1 ac5c9cd8-01 0802 2865 sda2 ac5c9cd8-02 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2) Tested with x86/64 with Docker (squashfs), qemustart (ext4/squashfs) and virtualbox (ext4/squashfs). Ref: FS#2935 Fixes: cb007a7bf619 ("x86: switch image generation to new code") Suggested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Paul Spooren <mail@aparcar.org> [commit subject and description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: Fix gigabit switch support for Mikrotik RB951G-2HnDBaptiste Jonglez2020-03-281-0/+2
| | | | | | | | | | | | | | | | | | | | Without this patch, when using rev 3 of the Atheros AR9344 SoC, the gigabit switch (AR8327) does not work or works very erratically. This is a re-spin of http://patchwork.ozlabs.org/patch/419857/ with a different PLL value, according to the feedback from several users (including myself) as shown here: https://openwrt.org/toh/mikrotik/rb2011uias#tracking_reported_experience_with_suggested_patch_for_the_5_gige_ports Performance is acceptable: testing L3 forwarding without NAT yields a performance of 370 Mbit/s (iperf3 TCP) and 41 Kpps (iperf3 UDP with 64 bytes payload). Both tests show that 100% of CPU time is spent on softirq. A similar fix for a different device (RB2011) was added in e457d22261 ("Make GBit switch work on RB2011"). Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-2851-598/+110
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: switch to 5.4 kernelPetr Štetiar2020-03-281-1/+1
| | | | | | | 5.4.24 seems to be working fine on my zyxel,nbg6617, so let's start wider userbase testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: wpj428: fix missing MDIO GPIO reset and pinmuxLeon M. George2020-03-282-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | The bootloader does not always initialize the MDIO pins before booting Linux. E.g. on version "U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Jul 25 2017 - 11:36:26)" this is the case when booting automatically without activating the U-Boot console. Without this change, the kernel boot will complain about missing PHYs: libphy: ipq40xx_mdio: probed ar40xx c000000.ess-switch: Probe failed - Missing PHYs! libphy: Fixed MDIO Bus: probed With this change it will work as expected: libphy: ipq40xx_mdio: probed ESS reset ok! ESS reset ok! libphy: Fixed MDIO Bus: probed Ref: GH-2835 Tested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> Signed-off-by: Leon M. George <leon@georgemail.eu> [commit description from Fredrik, subject facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: switch to 5.4 kernelPetr Štetiar2020-03-281-1/+1
| | | | | | | Seems to be working fine on my a64-olinuxino, it's 99.9% upstream stuff anyway. Lets start wider userbase testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: a53: fix ethernet on a64-olinuxinoPetr Štetiar2020-03-281-0/+1
| | | | | | | a64-olinuxino board has Micrel KSZ9031 Gigabit PHY so add support for this PHY into kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: 5.4: dts: a64: olinuxino: add bank supply regulatorsPetr Štetiar2020-03-281-0/+62
| | | | | | | | | | | | | | This is backport of v5.6 patch. Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This patch adds regulators for them to the pinctrl node. Exception is PL which is used by the RSB bus. To avoid circular dependencies, VCC-PL is omitted. On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: 5.4: a64-olinuxino: use red LED for status signalizationPetr Štetiar2020-03-282-0/+68
| | | | | | | There is a red LED marked as `GPIO_LED1` on the silkscreen and connected to PE17, so use this LED for status signalization. Signed-off-by: Petr Štetiar <ynezz@true.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:02:11 +0000