aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix kernel Oops in at803x_link_change_notifyFelix Fietkau2015-07-061-1/+1
| | | | | | | | | | | | r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range extender") introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which didn't have at803x_platform_data specified for an at803x based device. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46200
* ar71xx: update preinit script for new ath10k firmwareFelix Fietkau2015-07-061-2/+2
| | | | | | | | | Update firmware name and md5sum. MAC-address location remains unchanged from previous version. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46196
* ar71xx: fix UAP-PRO imagesFelix Fietkau2015-07-061-4/+4
| | | | | | | | | - it should be BOARDNAME instead of BOARD_NAME - kernel partition should be padded to 1536k (somehow this padding was lost in translation to BuildCode in bc797c73f6328941b2194d144385655ad9297e7c) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 46193
* ar71xx: microtik: disable all non-microtik boardsJonas Gorski2015-07-051-3/+6
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46191
* ar71xx: EPG5000 requires ATH79_NVRAMJonas Gorski2015-07-051-1/+2
| | | | | | | | | | | EPG5000 uses ath79 nvram functions, but does not select it. This breaks build if no other board support enabling nvram support is selected. Closes #19952. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46190
* ixp4xx: add linux 4.1 supportJonas Gorski2015-07-0542-0/+9767
| | | | | | | | Compile tested only. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46189
* kernel: add a few more missing config symbolsJonas Gorski2015-07-051-0/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46188
* kernel: generic: add missing arm machtypesJonas Gorski2015-07-052-2/+14
| | | | | | | | | Some machtypes were dropped when 4.0 support was added, and the incomplete patch was taken over to 4.1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46187
* ar7: add linux 4.1 supportJonas Gorski2015-07-0514-2/+970
| | | | | | | | Compile tested only. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46186
* kernel: mips_disable_fpu: initialize fault_addr in fpu_emulator_cop1HandlerJonas Gorski2015-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code calling fpu_emulator_cop1Handler will pass on fault_addr, making gcc complain about it not being initialized when the FPU emulator is disabled. Fixes: arch/mips/kernel/traps.c: In function 'do_fpe': arch/mips/kernel/traps.c:864:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] process_fpemu_return(sig, fault_addr, fcr31); ^ arch/mips/kernel/traps.c: In function 'do_ri': arch/mips/kernel/traps.c:806:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] process_fpemu_return(sig, fault_addr, fcr31); ^ arch/mips/kernel/traps.c:763:15: note: 'fault_addr' was declared here void __user *fault_addr; ^ arch/mips/kernel/traps.c: In function 'do_cpu': arch/mips/kernel/traps.c:1421:28: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (!process_fpemu_return(sig, fault_addr, fcr31) && !err) ^ cc1: all warnings being treated as errors make[7]: *** [arch/mips/kernel/traps.o] Error 1 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46184
* brcm63xx: use IRQCHIP_DECLARE instead of self-baked versionJonas Gorski2015-07-052-1/+80
| | | | | | | | | Backport a commit from 4.2 making IRQCHIP_DECLARE available outside of drivers/irqchip and use it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46183
* brcm63xx: 4.1: switch to upstream UHI interfaceJonas Gorski2015-07-054-129/+142
| | | | | | | | | Replace the appended dtb patch with the upstream accepted version and update the code to work with the changed interface. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46181
* at91: add Device Tree based board detectionFlorian Fainelli2015-07-044-3/+127
| | | | | | | | Set up eth0 as LAN interface by default. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 46174
* at91: sama5d3: enable USB2 by defaultFlorian Fainelli2015-07-041-0/+2
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 46173
* at91: enable Micrel PHY driverFlorian Fainelli2015-07-041-0/+1
| | | | | | | | | The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported by this PHY driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 46171
* kernel: b53: fix build with brcm47xxHauke Mehrtens2015-07-031-0/+5
| | | | | | | | | The position of the nvram header file on brcm47xx changed with kernel version 4.1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46170
* brcm47xx: add support for kernel 4.1Hauke Mehrtens2015-07-0342-1842/+208
| | | | | | | | This adds support for kernel 4.1 and removes kernel 4.0. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46166
* ar71xx: make 902-unaligned_access_hacks.patch apply againJonas Gorski2015-07-031-2/+2
| | | | | | | | | | | r46161 updated headers also touched by it, so it needed to be refreshed as well. Closes #20033. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46165
* kernel: improve uapi headers coexistence with muslJonas Gorski2015-07-0315-30/+984
| | | | | | | | | Make some network uapi headers detect if they are included after not only glibc but also musl headers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46161
* kernel: update 4.0 to 4.0.7Jonas Gorski2015-06-305-9/+4
| | | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.6 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.7 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46151
* kernel: update 3.18 to 3.18.17Jonas Gorski2015-06-3025-149/+52
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46150
* brcm63xx: swap a4001n power leds againJonas Gorski2015-06-301-5/+5
| | | | | | | | | | This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons"). Fixes #19858. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46149
* brcm63xx: unbreak board_probe_switch againJonas Gorski2015-06-3076-244/+286
| | | | | | | | | | | Also move it to an earlier place so new boards added are less likely to confuse quilt. Fixes #19965. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46148
* kernel: add some missing config options for 4.1Hauke Mehrtens2015-06-291-0/+3
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46147
* bcm53xx: port last 2 UART patches to 4.1Rafał Miłecki2015-06-295-253/+198
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46141
* bcm53xx: rework patch enabling UART supportRafał Miłecki2015-06-292-174/+103
| | | | | | | | | | Follow upstream patch and handle it using &uart0. Also disable &uart1 as it's most likely unused. This will allow us to get valuable reports and upstream these changes. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46140
* bcm53xx: use UART serial DT patch sent upstreamRafał Miłecki2015-06-295-81/+97
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46139
* bcm53xx: add upstream nand driverHauke Mehrtens2015-06-258-1647/+3064
| | | | | | | | This adds the upstream Broadcom nand driver and makes use of it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46131
* bcm53xx: add upstream PCIe driverHauke Mehrtens2015-06-256-536/+379
| | | | | | | | | This patch adds the missing parts to use the upstream Broadcom PCIe driver and makes use of it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46130
* bcm53xx: add arm l2c overwrite options like in mainline kernelHauke Mehrtens2015-06-2510-31/+631
| | | | | | | | | Instead of setting the l2c_aux_val variable in the board code make it possible to set these through device tree and make use of that. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46129
* bcm53xx: add support for kernel 4.1Hauke Mehrtens2015-06-2544-0/+6094
| | | | | | | | | This only removes the patches already applied upstream and makes the rest apply cleanly. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46128
* ar71xx: add support for tp-link wr740n v5.0 (EU)Luka Perkov2015-06-231-1/+9
| | | | | | | | | | | TP-Link ships wr740n v5.0 to Romania (so probably everywhere except China) with 4 MB flash and 32 MB memory (confirmed by their local support). This patch adds support for the v5.0 clone of v4, i just tested it on my own v5.0 router and it works. Signed-off-by: Daniel Petre <daniel.petre@posteo.net> SVN-Revision: 46115
* brcm63xx: add kernel 4.1 supportJonas Gorski2015-06-22158-0/+16148
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46113
* generic: add linux 4.1 supportJonas Gorski2015-06-22182-0/+29784
| | | | | | | | | | | | | | | | | | | | Boot tested: http://pastebin.com/L6aAb9xj Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: update to 4.1 final add patches added since submission delete patches applied in later rcs restore commit messages in 220-gc-sections and 304-mips_disable_fpu fix 050-backport_netfilter_rtcache to match new API update inlined dma ops with upstream changes add missing config symbols enabled CONFIG_MULTIUSER update kmod defintions for 4.1 ] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46112
* b53: Allow using all 8 ports on BCM53011Rafał Miłecki2015-06-211-1/+1
| | | | | | | | | | | On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46104
* bcm53xx: respect ACTIVE_LOW when powering USB using GPIORafał Miłecki2015-06-211-9/+28
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46088
* bcm53xx: enable USB power on Buffalo WZR-1750DHPRafał Miłecki2015-06-213-7/+39
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46087
* bcm53xx: update SPROM driver to include just-sent patchRafał Miłecki2015-06-211-44/+9
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46086
* ramips: refresh patch with USB_MT7621_XHCI_PLATFORMRafał Miłecki2015-06-211-8/+6
| | | | | | | Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46085
* bcm53xx: enable USB power on Netgear R6250Rafał Miłecki2015-06-211-0/+38
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46083
* bcm53xx: update xHCI patchRafał Miłecki2015-06-211-9/+22
| | | | | | | | This drops some debugging pr_info and adds platform_device_unregister. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46082
* bcm53xx: fix enabling GPIO-controlled USB powerRafał Miłecki2015-06-211-0/+31
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46081
* bcm53xx: add xHCI supportRafał Miłecki2015-06-214-0/+550
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46080
* kernel: make USB_XHCI_PLATFORM selectableRafał Miłecki2015-06-212-0/+92
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46079
* kernel: update 4.0 to 4.0.5Jonas Gorski2015-06-1944-384/+158
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46063
* ralink: add support for mt7621 switch countersJohn Crispin2015-06-181-1/+187
| | | | | | Signed-off-by: Cristian Morales Vega <cristian@samknows.com> SVN-Revision: 46050
* ar71xx: add profile and build image for EnGenius EPG5000.John Crispin2015-06-182-0/+14
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46049
* ar71xx: add user-space support for EnGenius EPG5000.John Crispin2015-06-184-1/+9
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46048
* ar71xx: add kernel support for EnGenius EPG5000.John Crispin2015-06-183-0/+218
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46047
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-184-6/+13
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46046
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:21:22 +0000