aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: Add Archer C2600 to image/MakefileAsh Benz2016-05-271-1/+24
| | | | Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ipq806x: Add support for linux-4.4Ram Chandra Jangir2016-05-27137-24887/+628
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
* include/image.mk: move build step tplink-safeloader to image.mkAsh Benz2016-05-271-12/+0
| | | | | | Move tplink-safeloader from target/linux/ar71xx/image/tp-link.mk to include/image.mk Signed-off-by: Ash Benz <ash.benz@bk.ru>
* lantiq: do not build images which exceed the flash sizeMathias Kresin2016-05-271-42/+46
| | | | | | | | | | The user benpicco in #openwrt reported that images are build which are bigger that the available flash size. He provided a proof of concept fix and gave permission to me to send it for inclusion. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - enable the IP101A phyMathias Kresin2016-05-272-5/+23
| | | | | | | | | | | | The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - fix pinmux configurationMathias Kresin2016-05-271-25/+1
| | | | | | | | | | | The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - fix brn partition layoutMathias Kresin2016-05-271-4/+50
| | | | | | | | | Use the brnboot partition layout as it is listed in the OpenWrt wiki article for this board. Configure the brnboot root selector for this device as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - get mac address from board_config partitionMathias Kresin2016-05-271-2/+3
| | | | | | | Use the mac address stored in the board_config partition instead of a static one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - add vlan supportMathias Kresin2016-05-272-1/+3
| | | | | | Add the lantiq,switch property to enable vlans and setup them up. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - add second usb portMathias Kresin2016-05-271-0/+5
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - cleanup pinmux configurationMathias Kresin2016-05-271-15/+3
| | | | | | | | | | | | Cleanup the pinmux configuration by removing the unused spi node. Nothing is connected to the SPI bus on devices. The stp_out pinmux child node covers the same GPIOs as the already used stp group. The same applies to the gphy-leds_out pinmux node and the "gphy0 led1" as well as "gphy1 led0" groups. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 - remove/merge redundant parts in dtsMathias Kresin2016-05-273-68/+21
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV4518PWR01 networkMohammed Berdai2016-05-271-0/+4
| | | | | | | | This patch fixes the missing Lan interface config in the file /etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan being down and therefore no way to access the router unless via UART-TTL. Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
* ramips: add backported MT7628 pinmux fixesÁlvaro Fernández Rojas2016-05-294-2/+220
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: add GPIO pin for usb power switch for RouterBOARD 912Cezary Jackiewicz2016-05-271-0/+4
| | | | | | | RB912 has one usb shared between external USB and miniPCIe slot. GPIO52 can reroute power to external USB (=1) or internal miniPCIe slot (=0) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* mediatek: more mtd fixesJohn Crispin2016-05-251-0/+62
| | | | | | this fixes full builds when ALL_KMODS is selected Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix regression in VG3503J.dtsJohn Crispin2016-05-241-0/+2
| | | | | | | | 9d0608eef3e5b9fca - "lantiq: VG3503J - merge profiles" resulted in the dts file missing the version string. Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: update mtd backportJohn Crispin2016-05-241-626/+423
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* sdk: remove redundant symbol declarationJo-Philipp Wich2016-05-241-7/+0
| | | | | | | | Commit d79f8909c1bde8376c82537798ce363797033cf9 introduced CONFIG_ALL, CONFIG_ALL_KMODS and CONFIG_ALL_NONSHARED as menuconfig choices to the SDK, therefor we can drop the hardcoded CONFIG_ALL symbol declaration now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sdk: stop shipping a .configJo-Philipp Wich2016-05-241-1/+0
| | | | | | | | | | | | | | | | Now that the most important options are exposed via menuconfig in the SDK we can stop shipping a (possibly outdated) copy of .config from the emitting buildroot. Leaving out .config has two positive side effects: - A simple "make" run without any prior config will launch menuconfig, forcing interactive users to make appropriate choices - Buildbot systems (e.g. our phase2 builder) can issue a "make defconfig" to obtain a .config enabling all packages by default Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kirkwood: add missing kernel symbolJo-Philipp Wich2016-05-241-0/+1
| | | | | | | The query for ARMADA_THERMAL is stalling the kconfig process and as long as we do not package it, simply disable the symbol. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: generalize partition discovery for sysupgradeJo-Philipp Wich2016-05-242-25/+54
| | | | | | | | | | | | | | | Generalize the partition discovery in sysupgrade in order to fix sysupgrade and config backup/recovery on MMC block devices which use a different naming scheme compared to mtdblock or sd* devices. The change also adds the find applet to the ramdisk utilities so that upgrade code can rely on it. The commit is based on the initial submission by Russell Senior at http://patchwork.ozlabs.org/patch/625440/ . Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sdk: Allow to change ALL* package settings in SDKDaniel Dickinson2016-05-241-0/+16
| | | | | | | | | | | | It is desirable to be able to use ./scripts/feeds install -a when in the SDK without being forced to build a great number of packages that are not actually wanted. We therefore add the option of changing the various ALL package build options so that we can default to packages not being built unless we select them. Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ramips: Add status led for Xiaomi MiWiFi NanoCezary Jackiewicz2016-05-231-1/+2
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ramips: fix timing issues when using MT7621 spiJohn Crispin2016-05-231-3/+6
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: configure switch on WRT1200AC and WRT1900ACv2/SClaudio Leite2016-05-231-6/+4
| | | | | | Also collapses the three identical configurations into one block. Signed-off-by: Claudio Leite <leitec@staticky.com>
* ar71xx/cpe510: use second wifi calibration tableAlexander Couzens2016-05-231-1/+1
| | | | | | | The cpe510 has two calibration tables. The first calibration table requires to modify ath9k driver to work (patched tx gain table). Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510Alexander Couzens2016-05-238-10/+43
| | | | | | | Split profile into 2GHz and 5GHz. The 5GHz devices are quite "special". The 2 GHz works perfect. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: add MR1750v2 to the MR1750 profileSven Eckelmann2016-05-231-2/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 boardSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh MR1750v2Sven Eckelmann2016-05-231-0/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh MR1750v2Sven Eckelmann2016-05-235-2/+9
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add kernel support for the OpenMesh MR1750v2Sven Eckelmann2016-05-232-0/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add OM2P-HSv3 to the OM2P profileSven Eckelmann2016-05-231-2/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3Sven Eckelmann2016-05-232-0/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh OM2P-HSv3Sven Eckelmann2016-05-233-0/+5
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add kernel support for the OpenMesh OM2P-HSv3Sven Eckelmann2016-05-232-0/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Allow OpenMesh CE images with more than 3 filesSven Eckelmann2016-05-231-1/+1
| | | | | | | | | | The CE image format used by OpenMesh can contain extra blocks which are not used for flashing. Only the first three embedded images (fwupgrade.cfg, kernel, rootfs) are required in this order to successfully flash an image via sysupgrade. All extra embedded images should be ignored for the available devices. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Move OpenMesh image target validation into subfunctionSven Eckelmann2016-05-231-32/+39
| | | | | | | | | | | | | The platform_check_image_openmesh function used break statements to signal that the board name matched the image target. This worked because the sysupgrade binary checked the image inside a loop. The break statement stopped the loop and skipped any additional check. Instead the check should be done without such sideeffects by simply combining the board names and image targets. Only a mismatch should cause a negative result for the caller and skipping of the additional checks. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Generate sysupgrade images for OpenMesh devicesSven Eckelmann2016-05-231-0/+3
| | | | | | | | | | | | Some OpenWrt based firmwares like Gluon expect that a sysupgrade image exists when a device firmware can be updated via sysupgrade. This image wasn't created until now because OpenMesh devices use the same image for factory and sysupgrade flash. Copying the image from *factory.bin to *sysupgrade.bin is therefore enough to make the sysupgrade functionality visible. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Add support for initramfs images for OpenMesh devicesSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: move nand device image definitions to a separate fileFelix Fietkau2016-05-232-24/+22
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: move generic device image definitions to a separate fileFelix Fietkau2016-05-232-339/+338
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split ubnt image building code into a separate fileFelix Fietkau2016-05-232-247/+248
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split legacy image building code into a separate fileFelix Fietkau2016-05-232-1212/+1219
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split tp-link image building code into a separate fileFelix Fietkau2016-05-232-746/+748
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86_64: enable mmc to support booting off sdRussell Senior2016-05-231-0/+8
| | | | | | Improved support for PCEngines APU Signed-off-by: Russell Senior <russell@personaltelco.net>
* ath25: update kernel from 3.18 to 4.4Russell Senior2016-05-2318-2934/+149
| | | | | | | | | | | | | | | Summary of changes: * moved config-3.18 to config-4.4 and patches-3.18 to patches-4.4 * removed most of the first two patches, that seem to be upstream already * changed deprecated/removed IRQF_DISABLED to zero following examples in upstream kernel patches * added config line to disable device-tree to satisfy kernel configuration * add new image generation code Build tested and run tested on an Accton MR3201A. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Add specific compatible properties for eswJohn Crispin2016-05-232-2/+2
| | | | | | | | | | | | | | | | Currently, for RT5350 and MT7628, esw is marked as compatible with "ralink,rt3050-esw". While this is true, the switches within RT5350 and MT7628 actually support more functionality than the RT3050 switch. One such example is per-VLAN untagging, which is an important feature. RT3352 is another example of this, but it already has an additional compatible property, which allows to differentiate it from RT3050. This commit adds such more specific properties for RT5350 and MT7628 as well. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
* mediatek: update patchesJohn Crispin2016-05-23124-3138/+11056
| | | | | | | * fixes NAND * adds latest ethernet patches Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:07:47 +0000