From 693e5aae4160a69958b64fed77daa1696392fb0b Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 28 Mar 2015 13:21:09 +0000
Subject: brcm63xx: remove linux 3.14 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45089
---
 target/linux/brcm63xx/config-3.14                  | 223 -------
 ...nlocked-version-of-for_each_child_of_node.patch |  52 --
 ...o-Add-dt-support-for-a-single-device-with.patch |  91 ---
 ...002-lib-add-glibc-style-strchrnul-variant.patch |  56 --
 ...-Make-of_find_node_by_path-handle-aliases.patch | 106 ---
 ...X-remove-RUNTIME_DETECT-code-from-registe.patch |  61 --
 ...X-remove-RUNTIME_DETECT-from-irq-setup-co.patch | 135 ----
 ...3XX-remove-RUNTIME_DETECT-from-reset-code.patch |  85 ---
 ...63XX-remove-RUNTIME_DETECT-code-from-gpio.patch |  39 --
 ...M63XX-remove-RUNTIME_DETECT-from-spi-code.patch |  80 ---
 ...X-remove-RUNTIME_DETECT-usage-from-enet-c.patch |  89 ---
 ...X-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch |  23 -
 ...X-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch | 199 ------
 ...-BCM63XX-add-width-to-__dispatch_internal.patch |  41 --
 ...9-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch | 225 -------
 ...X-replace-irq-dispatch-code-with-a-generi.patch | 174 -----
 ...BCM63XX-append-irq-line-to-irq_-stat-mask.patch | 182 -----
 ...X-populate-irq_-stat-mask-_addr-for-secon.patch |  94 ---
 ...3XX-add-cpu-argument-to-dispatch-internal.patch |  70 --
 ...IPS-BCM63XX-protect-irq-register-accesses.patch | 162 -----
 ...BCM63XX-wire-up-the-second-cpu-s-irq-line.patch |  93 ---
 ...63XX-use-irq_desc-as-argument-for-un-mask.patch |  83 ---
 ...S-BCM63XX-allow-setting-affinity-for-IPIC.patch | 118 ----
 ...-MIPS-Always-use-IRQ-domains-for-CPU-IRQs.patch |  98 ---
 ...e-mips_cpu_intc_init-mips_cpu_irq_of_init.patch |  89 ---
 ...-MIPS-Provide-a-generic-plat_irq_dispatch.patch |  58 --
 ...S-BCM63XX-add-USB-host-clock-enable-delay.patch |  28 -
 ...X-add-USB-device-clock-enable-delay-to-cl.patch |  41 --
 ...63XX-sync-mips-counter-during-cpu-bringup.patch |  27 -
 ...X-move-code-touching-the-USB-private-regi.patch | 151 -----
 ...X-add-OHCI-EHCI-configuration-bits-to-com.patch | 169 -----
 ...X-introduce-BCM63XX_OHCI-configuration-sy.patch |  62 --
 ...X-add-support-for-the-on-chip-OHCI-contro.patch | 138 ----
 ...X-register-OHCI-controller-if-board-enabl.patch |  36 -
 ...X-introduce-BCM63XX_EHCI-configuration-sy.patch |  62 --
 ...X-add-support-for-the-on-chip-EHCI-contro.patch | 137 ----
 ...X-register-EHCI-controller-if-board-enabl.patch |  36 -
 ...X-EHCI-controller-does-not-support-overcu.patch |  24 -
 ...llow-specifying-the-parsers-for-SPI-flash.patch |  38 --
 ...-m25p80-use-parsers-if-provided-in-flash-.patch |  23 -
 ...CES-m25p80-add-support-for-limiting-reads.patch |  92 ---
 ...low-other-arches-to-use-the-BE-frame-numb.patch |  31 -
 ...CI-allow-limiting-ports-for-ehci-platform.patch |  65 --
 ...X-move-device-registration-code-into-its-.patch | 493 --------------
 ...X-pass-a-mac-addresss-allocator-to-board-.patch | 100 ---
 .../brcm63xx/patches-3.14/300-reset_buttons.patch  | 101 ---
 .../brcm63xx/patches-3.14/301-led_count.patch      |  41 --
 .../302-extended-platform-devices.patch            |  25 -
 .../brcm63xx/patches-3.14/303-spi-board-info.patch |  33 -
 .../patches-3.14/309-cfe_version_mod.patch         |  27 -
 .../patches-3.14/310-cfe_simplify_detection.patch  |  20 -
 .../311-bcm63xxpart_use_cfedetection.patch         |  51 --
 ...-support-for-bcm6345-style-periphery-irq-.patch | 457 -------------
 ...-support-for-bcm6345-style-external-inter.patch | 381 -----------
 .../322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch    | 694 -------------------
 ...X-wire-up-BCM6358-s-external-interrupts-4.patch |  57 --
 ...MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch |  77 ---
 .../331-MIPS-BCM63XX-define-variant-id-field.patch |  23 -
 .../332-MIPS-BCM63XX-detect-BCM6328-variants.patch |  68 --
 .../333-MIPS-BCM63XX-detect-BCM6362-variants.patch |  46 --
 .../334-MIPS-BCM63XX-detect-BCM6368-variants.patch |  48 --
 ...-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch |  20 -
 ...X-dynamically-set-the-pcie-memory-windows.patch |  70 --
 .../337-MIPS-BCM63XX-widen-cpuid-field.patch       |  56 --
 .../338-MIPS-BCM63XX-increase-number-of-IRQs.patch |  39 --
 ...339-MIPS-BCM63XX-add-support-for-BCM63268.patch | 739 ---------------------
 ...IPS-BCM63XX-add-pcie-support-for-BCM63268.patch |  55 --
 .../341-MIPS-BCM63XX-add-support-for-BCM6318.patch | 675 -------------------
 ...342-MIPS-BCM63XX-split-PCIe-reset-signals.patch | 156 -----
 ...MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch | 342 ----------
 ...X-detect-flash-type-early-and-store-the-r.patch |  74 ---
 ...3XX-fixup-mapped-SPI-flash-access-on-boot.patch |  63 --
 .../346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch  |  56 --
 .../347-MIPS-BCM6318-USB-support.patch             | 124 ----
 .../348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch  |  71 --
 ...349-MIPS-BCM63XX-add-BCM63268-USB-support.patch | 117 ----
 ...S-BCM63XX-support-settings-num-usbh-ports.patch | 107 ---
 .../patches-3.14/351-set-board-usbh-ports.patch    |  10 -
 ...X-allow-building-support-for-more-than-on.patch |  95 ---
 ...X-allow-board-implementations-to-force-fl.patch |  61 --
 ...X-move-fallback-sprom-support-into-its-ow.patch | 188 ------
 ...S-BCM63XX-use-platform-data-for-the-sprom.patch |  95 ---
 ...MIPS-BCM63XX-make-fallback-sprom-optional.patch | 140 ----
 ...PS-BCM63XX-allow-different-types-of-sprom.patch |  66 --
 ...0-MIPS-BCM63XX-add-support-for-raw-sproms.patch | 517 --------------
 ...X-add-raw-fallback-sproms-for-most-common.patch | 181 -----
 ...X-also-register-a-fallback-sprom-for-bcma.patch | 128 ----
 ...PS-BCM63XX-add-BCMA-based-sprom-templates.patch | 303 ---------
 ...X-allow-board-files-to-provide-sprom-fixu.patch |  67 --
 ...X-allow-setting-a-pci-bus-device-for-fall.patch | 102 ---
 ...-add-support-for-vmlinux.bin-appended-DTB.patch | 124 ----
 ...-MIPS-BCM63XX-add-support-for-loading-DTB.patch |  96 ---
 ...X-add-support-for-matching-the-board_info.patch |  95 ---
 ...X-populate-the-compatible-to-board_info-l.patch |  65 --
 .../371_add_of_node_available_by_alias.patch       |  37 --
 ...ont_register_pflash_when_available_in_dtb.patch |  21 -
 ...X-register-interrupt-controllers-through-.patch |  40 --
 ...gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch | 166 -----
 ...75-MIPS-BCM63XX-switch-to-new-gpio-driver.patch | 216 ------
 ...x_enet-use-named-gpio-for-ephy-reset-gpio.patch |  49 --
 ...M63XX-register-lookup-for-ephy-reset-gpio.patch | 138 ----
 ...X-do-not-register-gpio-controller-if-pres.patch |  34 -
 ...X-provide-a-gpio-lookup-for-the-pcmcia-re.patch |  59 --
 ...mcia-bcm63xx_pmcia-use-the-new-named-gpio.patch |  59 --
 .../patches-3.14/400-bcm963xx_flashmap.patch       |  65 --
 .../401-bcm963xx_real_rootfs_length.patch          |  27 -
 .../402_bcm63xx_enet_vlan_incoming_fixed.patch     |  11 -
 .../403-6358-enet1-external-mii-clk.patch          |  22 -
 ..._enet-move-phy_-dis-connect-into-probe-re.patch | 169 -----
 ...enet-enable-rgmii-clock-on-external-ports.patch |  53 --
 ...IPS-BCM63XX-Register-SPI-flash-if-present.patch | 133 ----
 .../412-MTD-physmap-allow-passing-pp_data.patch    |  41 --
 ...-allow-providing-fixup-data-in-board-data.patch |  72 --
 .../414-MTD-m25p80-allow-passing-pp_data.patch     |  40 --
 ...PS-BCM63XX-export-the-attached-flash-type.patch |  31 -
 ...416-BCM63XX-add-a-fixup-for-ath9k-devices.patch | 236 -------
 ...cm63xxpart-allow-passing-a-caldata-offset.patch | 120 ----
 ...8-MIPS-BCM63XX-pass-caldata-info-to-flash.patch |  83 ---
 .../420-BCM63XX-add-endian-check-for-ath9k.patch   |  51 --
 .../421-BCM63XX-add-led-pin-for-ath9k.patch        |  49 --
 ...22-BCM63XX-add-a-fixup-for-rt2x00-devices.patch | 206 ------
 .../423-bcm63xx_enet_add_b53_support.patch         | 169 -----
 .../424-bcm63xx_enet_no_request_mem_region.patch   |  15 -
 .../425-bcm63xxpart_parse_paritions_from_dt.patch  | 357 ----------
 ...6-bcm63xx_enet-fix-napi-poll-return-value.patch |  27 -
 ...99-allow_better_context_for_board_patches.patch |  56 --
 .../brcm63xx/patches-3.14/500-board-D4PW.patch     |  41 --
 .../brcm63xx/patches-3.14/501-board-NB4.patch      |  83 ---
 .../patches-3.14/502-board-96338W2_E7T.patch       |  39 --
 .../brcm63xx/patches-3.14/503-board-CPVA642.patch  |  45 --
 .../patches-3.14/504-board_dsl_274xb_rev_c.patch   |  42 --
 .../brcm63xx/patches-3.14/505-board_spw500v.patch  |  64 --
 .../patches-3.14/506-board_gw6200_gw6000.patch     |  87 ---
 .../brcm63xx/patches-3.14/507-board-MAGIC.patch    |  59 --
 .../brcm63xx/patches-3.14/508-board_hw553.patch    |  53 --
 .../patches-3.14/509-board_rta1320_16m.patch       |  40 --
 .../brcm63xx/patches-3.14/510-board_spw303v.patch  |  40 --
 .../brcm63xx/patches-3.14/511-board_V2500V.patch   |  93 ---
 .../brcm63xx/patches-3.14/512-board_BTV2110.patch  |  36 -
 ...MIPS-BCM63XX-add-inventel-Livebox-support.patch | 224 -------
 .../patches-3.14/514-board_ct536_ct5621.patch      |  54 --
 .../patches-3.14/515-board_DWV-S0_fixes.patch      |  19 -
 .../patches-3.14/516-board_96348A-122.patch        |  50 --
 .../patches-3.14/517-RTA1205W_16_uart_fixes.patch  |  10 -
 .../patches-3.14/519_board_CPVA502plus.patch       |  46 --
 ...0-bcm63xx-add-support-for-96368MVWG-board.patch | 119 ----
 ...-bcm63xx-add-support-for-96368MVNgr-board.patch |  74 ---
 ...IPS-BCM63XX-add-96328avng-reference-board.patch |  45 --
 ...IPS-BCM63XX-add-963281TAN-reference-board.patch |  69 --
 .../patches-3.14/524-board_dsl_274xb_rev_f.patch   |  80 ---
 .../brcm63xx/patches-3.14/525-board_96348w3.patch  |  44 --
 .../brcm63xx/patches-3.14/526-board_CT6373-1.patch |  50 --
 .../patches-3.14/527-board_dva-g3810bn-tl-1.patch  |  55 --
 .../brcm63xx/patches-3.14/528-board_nb6.patch      | 112 ----
 .../brcm63xx/patches-3.14/529-board_fast2604.patch |  42 --
 .../brcm63xx/patches-3.14/530-board_A4001N1.patch  |  69 --
 .../patches-3.14/531-board_AR-5387un.patch         |  98 ---
 .../brcm63xx/patches-3.14/532-board_AR-5381u.patch |  80 ---
 .../brcm63xx/patches-3.14/533-board_rta770bw.patch |  41 --
 .../brcm63xx/patches-3.14/534-board_hw556.patch    | 124 ----
 .../brcm63xx/patches-3.14/535-board_rta770w.patch  |  46 --
 .../brcm63xx/patches-3.14/536-board_fast2704.patch |  75 ---
 .../patches-3.14/537-board_fast2504n.patch         |  68 --
 .../550-MIPS-BCM63XX-remove-leds-and-buttons.patch | 343 ----------
 .../patches-3.14/553-boards_probe_switch.patch     |  98 ---
 .../brcm63xx/patches-3.14/555-board_96318ref.patch | 106 ---
 .../patches-3.14/556-board_96318ref_p300.patch     | 105 ---
 .../patches-3.14/557-board_bcm963269bhr.patch      |  88 ---
 .../brcm63xx/patches-3.14/558-board_AR1004G.patch  |  49 --
 .../brcm63xx/patches-3.14/559-board_vw6339gu.patch | 119 ----
 .../patches-3.14/560-board_963268gu_p300.patch     |  85 ---
 .../patches-3.14/561-board_WAP-5813n.patch         |  94 ---
 .../brcm63xx/patches-3.14/562-board_VR-3025u.patch |  79 ---
 .../patches-3.14/563-board_VR-3025un.patch         |  79 ---
 .../patches-3.14/564-board_P870HW-51a_v2.patch     |  68 --
 .../brcm63xx/patches-3.14/565-board_hw520.patch    |  56 --
 .../brcm63xx/patches-3.14/566-board_A4001N.patch   |  69 --
 .../patches-3.14/567-board_dsl-2751b_e1.patch      | 152 -----
 .../patches-3.14/568-board_DGND3700v1_3800B.patch  |  67 --
 .../brcm63xx/patches-3.14/800-wl_exports.patch     |  25 -
 .../801-ssb_export_fallback_sprom.patch            |  31 -
 .../802-rtl8367r_fix_RGMII_support.patch           |  30 -
 ...around-unaligned-accesses-failing-on-bcm6.patch |  26 -
 .../810-BCM63XX-move-kernel-behind-CFE.patch       |  29 -
 184 files changed, 18791 deletions(-)
 delete mode 100644 target/linux/brcm63xx/config-3.14
 delete mode 100644 target/linux/brcm63xx/patches-3.14/001-of-Create-unlocked-version-of-for_each_child_of_node.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/002-lib-add-glibc-style-strchrnul-variant.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/003-of-Make-of_find_node_by_path-handle-aliases.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/010-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/011-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/012-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/013-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/014-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/015-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/016-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/017-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/018-MIPS-BCM63XX-add-width-to-__dispatch_internal.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/019-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/020-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/021-MIPS-BCM63XX-append-irq-line-to-irq_-stat-mask.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/022-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/023-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/024-MIPS-BCM63XX-protect-irq-register-accesses.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/025-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/026-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/027-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/030-MIPS-Always-use-IRQ-domains-for-CPU-IRQs.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/031-MIPS-Rename-mips_cpu_intc_init-mips_cpu_irq_of_init.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/032-MIPS-Provide-a-generic-plat_irq_dispatch.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-sync-mips-counter-during-cpu-bringup.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/301-led_count.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/310-cfe_simplify_detection.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/311-bcm63xxpart_use_cfedetection.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/371_add_of_node_available_by_alias.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/372_dont_register_pflash_when_available_in_dtb.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/425-bcm63xxpart_parse_paritions_from_dt.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/426-bcm63xx_enet-fix-napi-poll-return-value.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/530-board_A4001N1.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/531-board_AR-5387un.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/532-board_AR-5381u.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/550-MIPS-BCM63XX-remove-leds-and-buttons.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/562-board_VR-3025u.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/564-board_P870HW-51a_v2.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/565-board_hw520.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/566-board_A4001N.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/567-board_dsl-2751b_e1.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
 delete mode 100644 target/linux/brcm63xx/patches-3.14/810-BCM63XX-move-kernel-behind-CFE.patch

diff --git a/target/linux/brcm63xx/config-3.14 b/target/linux/brcm63xx/config-3.14
deleted file mode 100644
index 76ece46e52..0000000000
--- a/target/linux/brcm63xx/config-3.14
+++ /dev/null
@@ -1,223 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_B53=y
-CONFIG_B53_MMAP_DRIVER=y
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-CONFIG_B53_SPI_DRIVER=y
-# CONFIG_B53_SRAB_DRIVER is not set
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_APPENDED_DTB=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.14/001-of-Create-unlocked-version-of-for_each_child_of_node.patch b/target/linux/brcm63xx/patches-3.14/001-of-Create-unlocked-version-of-for_each_child_of_node.patch
deleted file mode 100644
index 13957890b9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/001-of-Create-unlocked-version-of-for_each_child_of_node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0d0e02d605c5696a5076510f564fefe659127aa4 Mon Sep 17 00:00:00 2001
-From: Grant Likely <grant.likely@linaro.org>
-Date: Thu, 22 May 2014 01:04:17 +0900
-Subject: [PATCH] of: Create unlocked version of for_each_child_of_node()
-
-When iterating over nodes, sometimes it needs to be done when the DT
-lock is already held. This patch makes an unlocked version of the
-for_each_child_of_node() macro.
-
-Signed-off-by: Grant Likely <grant.likely@linaro.org>
----
- drivers/of/base.c | 22 +++++++++++++++++-----
- 1 file changed, 17 insertions(+), 5 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -545,6 +545,22 @@ struct device_node *of_get_next_parent(s
- }
- EXPORT_SYMBOL(of_get_next_parent);
- 
-+static struct device_node *__of_get_next_child(const struct device_node *node,
-+						struct device_node *prev)
-+{
-+	struct device_node *next;
-+
-+	next = prev ? prev->sibling : node->child;
-+	for (; next; next = next->sibling)
-+		if (of_node_get(next))
-+			break;
-+	of_node_put(prev);
-+	return next;
-+}
-+#define __for_each_child_of_node(parent, child) \
-+	for (child = __of_get_next_child(parent, NULL); child != NULL; \
-+	     child = __of_get_next_child(parent, child))
-+
- /**
-  *	of_get_next_child - Iterate a node childs
-  *	@node:	parent node
-@@ -560,11 +576,7 @@ struct device_node *of_get_next_child(co
- 	unsigned long flags;
- 
- 	raw_spin_lock_irqsave(&devtree_lock, flags);
--	next = prev ? prev->sibling : node->child;
--	for (; next; next = next->sibling)
--		if (of_node_get(next))
--			break;
--	of_node_put(prev);
-+	next = __of_get_next_child(node, prev);
- 	raw_spin_unlock_irqrestore(&devtree_lock, flags);
- 	return next;
- }
diff --git a/target/linux/brcm63xx/patches-3.14/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch b/target/linux/brcm63xx/patches-3.14/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch
deleted file mode 100644
index d4a36e8e39..0000000000
--- a/target/linux/brcm63xx/patches-3.14/001-spi-spi-gpio-Add-dt-support-for-a-single-device-with.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From d1d81802522ade84128a2c66c0d500e372474dca Mon Sep 17 00:00:00 2001
-From: Torsten Fleischer <torfl6749@gmail.com>
-Date: Mon, 3 Nov 2014 17:17:55 +0100
-Subject: [PATCH] spi: spi-gpio: Add dt support for a single device with no
- chip select
-
-In order to describe a single slave device that has no chip select line
-the 'num-chipselects' property has to be <0> and the 'cs-gpios' property
-doesn't need to be set.
-
-Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- Documentation/devicetree/bindings/spi/spi-gpio.txt |  6 ++++--
- drivers/spi/spi-gpio.c                             | 21 +++++++++++++++------
- 2 files changed, 19 insertions(+), 8 deletions(-)
-
---- a/Documentation/devicetree/bindings/spi/spi-gpio.txt
-+++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt
-@@ -8,8 +8,10 @@ Required properties:
-  - gpio-sck: GPIO spec for the SCK line to use
-  - gpio-miso: GPIO spec for the MISO line to use
-  - gpio-mosi: GPIO spec for the MOSI line to use
-- - cs-gpios: GPIOs to use for chipselect lines
-- - num-chipselects: number of chipselect lines
-+ - cs-gpios: GPIOs to use for chipselect lines.
-+             Not needed if num-chipselects = <0>.
-+ - num-chipselects: Number of chipselect lines. Should be <0> if a single device
-+                    with no chip select is connected.
- 
- Example:
- 
---- a/drivers/spi/spi-gpio.c
-+++ b/drivers/spi/spi-gpio.c
-@@ -425,6 +425,7 @@ static int spi_gpio_probe(struct platfor
- 	struct spi_gpio_platform_data	*pdata;
- 	u16 master_flags = 0;
- 	bool use_of = 0;
-+	int num_devices;
- 
- 	status = spi_gpio_probe_dt(pdev);
- 	if (status < 0)
-@@ -434,16 +435,21 @@ static int spi_gpio_probe(struct platfor
- 
- 	pdata = dev_get_platdata(&pdev->dev);
- #ifdef GENERIC_BITBANG
--	if (!pdata || !pdata->num_chipselect)
-+	if (!pdata || (!use_of && !pdata->num_chipselect))
- 		return -ENODEV;
- #endif
- 
-+	if (use_of && !SPI_N_CHIPSEL)
-+		num_devices = 1;
-+	else
-+		num_devices = SPI_N_CHIPSEL;
-+
- 	status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
- 	if (status < 0)
- 		return status;
- 
- 	master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
--					(sizeof(int) * SPI_N_CHIPSEL));
-+					(sizeof(int) * num_devices));
- 	if (!master) {
- 		status = -ENOMEM;
- 		goto gpio_free;
-@@ -458,7 +464,7 @@ static int spi_gpio_probe(struct platfor
- 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- 	master->flags = master_flags;
- 	master->bus_num = pdev->id;
--	master->num_chipselect = SPI_N_CHIPSEL;
-+	master->num_chipselect = num_devices;
- 	master->setup = spi_gpio_setup;
- 	master->cleanup = spi_gpio_cleanup;
- #ifdef CONFIG_OF
-@@ -473,9 +479,12 @@ static int spi_gpio_probe(struct platfor
- 		 * property of the node.
- 		 */
- 
--		for (i = 0; i < SPI_N_CHIPSEL; i++)
--			spi_gpio->cs_gpios[i] =
--				of_get_named_gpio(np, "cs-gpios", i);
-+		if (!SPI_N_CHIPSEL)
-+			spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT;
-+		else
-+			for (i = 0; i < SPI_N_CHIPSEL; i++)
-+				spi_gpio->cs_gpios[i] =
-+					of_get_named_gpio(np, "cs-gpios", i);
- 	}
- #endif
- 
diff --git a/target/linux/brcm63xx/patches-3.14/002-lib-add-glibc-style-strchrnul-variant.patch b/target/linux/brcm63xx/patches-3.14/002-lib-add-glibc-style-strchrnul-variant.patch
deleted file mode 100644
index 33d7c9f3e5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/002-lib-add-glibc-style-strchrnul-variant.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 11d200e95f3e84c1102e4cc9863a3614fd41f3ad Mon Sep 17 00:00:00 2001
-From: Grant Likely <grant.likely@linaro.org>
-Date: Fri, 14 Mar 2014 17:00:14 +0000
-Subject: [PATCH] lib: add glibc style strchrnul() variant
-
-The strchrnul() variant helpfully returns a the end of the string
-instead of a NULL if the requested character is not found. This can
-simplify string parsing code since it doesn't need to expicitly check
-for a NULL return. If a valid string pointer is passed in, then a valid
-null terminated string will always come back out.
-
-Signed-off-by: Grant Likely <grant.likely@linaro.org>
----
- include/linux/string.h |  3 +++
- lib/string.c           | 18 ++++++++++++++++++
- 2 files changed, 21 insertions(+)
-
---- a/include/linux/string.h
-+++ b/include/linux/string.h
-@@ -52,6 +52,9 @@ extern int strncasecmp(const char *s1, c
- #ifndef __HAVE_ARCH_STRCHR
- extern char * strchr(const char *,int);
- #endif
-+#ifndef __HAVE_ARCH_STRCHRNUL
-+extern char * strchrnul(const char *,int);
-+#endif
- #ifndef __HAVE_ARCH_STRNCHR
- extern char * strnchr(const char *, size_t, int);
- #endif
---- a/lib/string.c
-+++ b/lib/string.c
-@@ -301,6 +301,24 @@ char *strchr(const char *s, int c)
- EXPORT_SYMBOL(strchr);
- #endif
- 
-+#ifndef __HAVE_ARCH_STRCHRNUL
-+/**
-+ * strchrnul - Find and return a character in a string, or end of string
-+ * @s: The string to be searched
-+ * @c: The character to search for
-+ *
-+ * Returns pointer to first occurrence of 'c' in s. If c is not found, then
-+ * return a pointer to the null byte at the end of s.
-+ */
-+char *strchrnul(const char *s, int c)
-+{
-+	while (*s && *s != (char)c)
-+		s++;
-+	return (char *)s;
-+}
-+EXPORT_SYMBOL(strchrnul);
-+#endif
-+
- #ifndef __HAVE_ARCH_STRRCHR
- /**
-  * strrchr - Find the last occurrence of a character in a string
diff --git a/target/linux/brcm63xx/patches-3.14/003-of-Make-of_find_node_by_path-handle-aliases.patch b/target/linux/brcm63xx/patches-3.14/003-of-Make-of_find_node_by_path-handle-aliases.patch
deleted file mode 100644
index 9ad07806cb..0000000000
--- a/target/linux/brcm63xx/patches-3.14/003-of-Make-of_find_node_by_path-handle-aliases.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From c22e650e66b862babe9c00bebb20b8029c7b0362 Mon Sep 17 00:00:00 2001
-From: Grant Likely <grant.likely@linaro.org>
-Date: Fri, 14 Mar 2014 17:07:12 +0000
-Subject: [PATCH] of: Make of_find_node_by_path() handle /aliases
-
-Make of_find_node_by_path() handle aliases as prefixes. To make this
-work the name search is refactored to search by path component instead
-of by full string. This should be a more efficient search, and it makes
-it possible to start a search at a subnode of a tree.
-
-Signed-off-by: David Daney <david.daney@cavium.com>
-Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
-[grant.likely: Rework to not require allocating at runtime]
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Grant Likely <grant.likely@linaro.org>
----
- drivers/of/base.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
- 1 file changed, 61 insertions(+), 6 deletions(-)
-
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -633,23 +633,78 @@ struct device_node *of_get_child_by_name
- }
- EXPORT_SYMBOL(of_get_child_by_name);
- 
-+static struct device_node *__of_find_node_by_path(struct device_node *parent,
-+						const char *path)
-+{
-+	struct device_node *child;
-+	int len = strchrnul(path, '/') - path;
-+
-+	if (!len)
-+		return NULL;
-+
-+	__for_each_child_of_node(parent, child) {
-+		const char *name = strrchr(child->full_name, '/');
-+		if (WARN(!name, "malformed device_node %s\n", child->full_name))
-+			continue;
-+		name++;
-+		if (strncmp(path, name, len) == 0 && (strlen(name) == len))
-+			return child;
-+	}
-+	return NULL;
-+}
-+
- /**
-  *	of_find_node_by_path - Find a node matching a full OF path
-- *	@path:	The full path to match
-+ *	@path: Either the full path to match, or if the path does not
-+ *	       start with '/', the name of a property of the /aliases
-+ *	       node (an alias).  In the case of an alias, the node
-+ *	       matching the alias' value will be returned.
-+ *
-+ *	Valid paths:
-+ *		/foo/bar	Full path
-+ *		foo		Valid alias
-+ *		foo/bar		Valid alias + relative path
-  *
-  *	Returns a node pointer with refcount incremented, use
-  *	of_node_put() on it when done.
-  */
- struct device_node *of_find_node_by_path(const char *path)
- {
--	struct device_node *np = of_allnodes;
-+	struct device_node *np = NULL;
-+	struct property *pp;
- 	unsigned long flags;
- 
-+	if (strcmp(path, "/") == 0)
-+		return of_node_get(of_allnodes);
-+
-+	/* The path could begin with an alias */
-+	if (*path != '/') {
-+		char *p = strchrnul(path, '/');
-+		int len = p - path;
-+
-+		/* of_aliases must not be NULL */
-+		if (!of_aliases)
-+			return NULL;
-+
-+		for_each_property_of_node(of_aliases, pp) {
-+			if (strlen(pp->name) == len && !strncmp(pp->name, path, len)) {
-+				np = of_find_node_by_path(pp->value);
-+				break;
-+			}
-+		}
-+		if (!np)
-+			return NULL;
-+		path = p;
-+	}
-+
-+	/* Step down the tree matching path components */
- 	raw_spin_lock_irqsave(&devtree_lock, flags);
--	for (; np; np = np->allnext) {
--		if (np->full_name && (of_node_cmp(np->full_name, path) == 0)
--		    && of_node_get(np))
--			break;
-+	if (!np)
-+		np = of_node_get(of_allnodes);
-+	while (np && *path == '/') {
-+		path++; /* Increment past '/' delimiter */
-+		np = __of_find_node_by_path(np, path);
-+		path = strchrnul(path, '/');
- 	}
- 	raw_spin_unlock_irqrestore(&devtree_lock, flags);
- 	return np;
diff --git a/target/linux/brcm63xx/patches-3.14/010-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch b/target/linux/brcm63xx/patches-3.14/010-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
deleted file mode 100644
index 04b34266b1..0000000000
--- a/target/linux/brcm63xx/patches-3.14/010-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 082a49f0490008b999db80e3ccf1521c7dd21cec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:32:44 +0100
-Subject: [PATCH 1/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from register
- sets
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 33 ------------------------
- 1 file changed, 33 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -598,10 +598,6 @@ enum bcm63xx_regs_set {
- 
- extern const unsigned long *bcm63xx_regs_base;
- 
--#define __GEN_RSET_BASE(__cpu, __rset)					\
--	case RSET_## __rset :						\
--		return BCM_## __cpu ##_## __rset ##_BASE;
--
- #define __GEN_RSET(__cpu)						\
- 	switch (set) {							\
- 	__GEN_RSET_BASE(__cpu, DSL_LMEM)				\
-@@ -693,36 +689,7 @@ extern const unsigned long *bcm63xx_regs
- 
- static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
- 	return bcm63xx_regs_base[set];
--#else
--#ifdef CONFIG_BCM63XX_CPU_3368
--	__GEN_RSET(3368)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6328
--	__GEN_RSET(6328)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6338
--	__GEN_RSET(6338)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6345
--	__GEN_RSET(6345)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6348
--	__GEN_RSET(6348)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6358
--	__GEN_RSET(6358)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6362
--	__GEN_RSET(6362)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6368
--	__GEN_RSET(6368)
--#endif
--#endif
--	/* unreached */
--	return 0;
- }
- 
- /*
diff --git a/target/linux/brcm63xx/patches-3.14/011-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch b/target/linux/brcm63xx/patches-3.14/011-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
deleted file mode 100644
index 92265302fc..0000000000
--- a/target/linux/brcm63xx/patches-3.14/011-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 07d0224576cbb2e6ac680b4ade4bba7a49bd0a07 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:34:11 +0100
-Subject: [PATCH 2/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from irq setup code
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 109 ------------------------------------------------
- 1 file changed, 109 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -26,114 +26,6 @@ static void __internal_irq_mask_64(unsig
- static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
- 
--#ifndef BCMCPU_RUNTIME_DETECT
--#ifdef CONFIG_BCM63XX_CPU_3368
--#define irq_stat_reg		PERF_IRQSTAT_3368_REG
--#define irq_mask_reg		PERF_IRQMASK_3368_REG
--#define irq_bits		32
--#define is_ext_irq_cascaded	0
--#define ext_irq_start		0
--#define ext_irq_end		0
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_3368
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6328
--#define irq_stat_reg		PERF_IRQSTAT_6328_REG
--#define irq_mask_reg		PERF_IRQMASK_6328_REG
--#define irq_bits		64
--#define is_ext_irq_cascaded	1
--#define ext_irq_start		(BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end		(BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6328
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6338
--#define irq_stat_reg		PERF_IRQSTAT_6338_REG
--#define irq_mask_reg		PERF_IRQMASK_6338_REG
--#define irq_bits		32
--#define is_ext_irq_cascaded	0
--#define ext_irq_start		0
--#define ext_irq_end		0
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6338
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6345
--#define irq_stat_reg		PERF_IRQSTAT_6345_REG
--#define irq_mask_reg		PERF_IRQMASK_6345_REG
--#define irq_bits		32
--#define is_ext_irq_cascaded	0
--#define ext_irq_start		0
--#define ext_irq_end		0
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6345
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6348
--#define irq_stat_reg		PERF_IRQSTAT_6348_REG
--#define irq_mask_reg		PERF_IRQMASK_6348_REG
--#define irq_bits		32
--#define is_ext_irq_cascaded	0
--#define ext_irq_start		0
--#define ext_irq_end		0
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6348
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6358
--#define irq_stat_reg		PERF_IRQSTAT_6358_REG
--#define irq_mask_reg		PERF_IRQMASK_6358_REG
--#define irq_bits		32
--#define is_ext_irq_cascaded	1
--#define ext_irq_start		(BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end		(BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6358
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6362
--#define irq_stat_reg		PERF_IRQSTAT_6362_REG
--#define irq_mask_reg		PERF_IRQMASK_6362_REG
--#define irq_bits		64
--#define is_ext_irq_cascaded	1
--#define ext_irq_start		(BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end		(BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count		4
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6362
--#define ext_irq_cfg_reg2	0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6368
--#define irq_stat_reg		PERF_IRQSTAT_6368_REG
--#define irq_mask_reg		PERF_IRQMASK_6368_REG
--#define irq_bits		64
--#define is_ext_irq_cascaded	1
--#define ext_irq_start		(BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end		(BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
--#define ext_irq_count		6
--#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6368
--#define ext_irq_cfg_reg2	PERF_EXTIRQ_CFG_REG2_6368
--#endif
--
--#if irq_bits == 32
--#define dispatch_internal			__dispatch_internal
--#define internal_irq_mask			__internal_irq_mask_32
--#define internal_irq_unmask			__internal_irq_unmask_32
--#else
--#define dispatch_internal			__dispatch_internal_64
--#define internal_irq_mask			__internal_irq_mask_64
--#define internal_irq_unmask			__internal_irq_unmask_64
--#endif
--
--#define irq_stat_addr	(bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
--#define irq_mask_addr	(bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
--
--static inline void bcm63xx_init_irq(void)
--{
--}
--#else /* ! BCMCPU_RUNTIME_DETECT */
--
- static u32 irq_stat_addr, irq_mask_addr;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
-@@ -234,7 +126,6 @@ static void bcm63xx_init_irq(void)
- 		internal_irq_unmask = __internal_irq_unmask_64;
- 	}
- }
--#endif /* ! BCMCPU_RUNTIME_DETECT */
- 
- static inline u32 get_ext_irq_perf_reg(int irq)
- {
diff --git a/target/linux/brcm63xx/patches-3.14/012-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch b/target/linux/brcm63xx/patches-3.14/012-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
deleted file mode 100644
index f26624eb4f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/012-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 72578a46543821c5b9544842e45fcbed0c1b7eb8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:35:12 +0100
-Subject: [PATCH 3/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from reset code
-
----
- arch/mips/bcm63xx/reset.c | 60 -----------------------------------------------
- 1 file changed, 60 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -125,8 +125,6 @@
- #define BCM6368_RESET_PCIE	0
- #define BCM6368_RESET_PCIE_EXT	0
- 
--#ifdef BCMCPU_RUNTIME_DETECT
--
- /*
-  * core reset bits
-  */
-@@ -188,64 +186,6 @@ static int __init bcm63xx_reset_bits_ini
- 
- 	return 0;
- }
--#else
--
--#ifdef CONFIG_BCM63XX_CPU_3368
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(3368)
--};
--#define reset_reg PERF_SOFTRESET_6358_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6328
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6328)
--};
--#define reset_reg PERF_SOFTRESET_6328_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6338
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6338)
--};
--#define reset_reg PERF_SOFTRESET_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6345
--static const u32 bcm63xx_reset_bits[] = { };
--#define reset_reg 0
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6348
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6348)
--};
--#define reset_reg PERF_SOFTRESET_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6358
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6358)
--};
--#define reset_reg PERF_SOFTRESET_6358_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6362
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6362)
--};
--#define reset_reg PERF_SOFTRESET_6362_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6368
--static const u32 bcm63xx_reset_bits[] = {
--	__GEN_RESET_BITS_TABLE(6368)
--};
--#define reset_reg PERF_SOFTRESET_6368_REG
--#endif
--
--static int __init bcm63xx_reset_bits_init(void) { return 0; }
--#endif
- 
- static DEFINE_SPINLOCK(reset_mutex);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/013-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch b/target/linux/brcm63xx/patches-3.14/013-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
deleted file mode 100644
index 49a3475e84..0000000000
--- a/target/linux/brcm63xx/patches-3.14/013-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 1aab93c5c97c55fef130726a6f58c9a1fd5b6240 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:36:45 +0100
-Subject: [PATCH 4/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from gpio
-
----
- arch/mips/bcm63xx/gpio.c | 14 --------------
- 1 file changed, 14 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -18,19 +18,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- 
--#ifndef BCMCPU_RUNTIME_DETECT
--#define gpio_out_low_reg	GPIO_DATA_LO_REG
--#ifdef CONFIG_BCM63XX_CPU_6345
--#ifdef gpio_out_low_reg
--#undef gpio_out_low_reg
--#define gpio_out_low_reg	GPIO_DATA_LO_REG_6345
--#endif /* gpio_out_low_reg */
--#endif /* CONFIG_BCM63XX_CPU_6345 */
--
--static inline void bcm63xx_gpio_out_low_reg_init(void)
--{
--}
--#else /* ! BCMCPU_RUNTIME_DETECT */
- static u32 gpio_out_low_reg;
- 
- static void bcm63xx_gpio_out_low_reg_init(void)
-@@ -44,7 +31,6 @@ static void bcm63xx_gpio_out_low_reg_ini
- 		break;
- 	}
- }
--#endif /* ! BCMCPU_RUNTIME_DETECT */
- 
- static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
- static u32 gpio_out_low, gpio_out_high;
diff --git a/target/linux/brcm63xx/patches-3.14/014-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch b/target/linux/brcm63xx/patches-3.14/014-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
deleted file mode 100644
index afde39bbaa..0000000000
--- a/target/linux/brcm63xx/patches-3.14/014-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 94f819bc230bb61a9ff21da6c860a40ca68c2805 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:43:35 +0100
-Subject: [PATCH 5/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from spi code
-
----
- arch/mips/bcm63xx/dev-spi.c                        |  4 ---
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     | 31 ----------------------
- 2 files changed, 35 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_regs.h>
- 
--#ifdef BCMCPU_RUNTIME_DETECT
- /*
-  * register offsets
-  */
-@@ -41,9 +40,6 @@ static __init void bcm63xx_spi_regs_init
- 		BCMCPU_IS_6362() || BCMCPU_IS_6368())
- 		bcm63xx_regs_spi = bcm6358_regs_spi;
- }
--#else
--static __init void bcm63xx_spi_regs_init(void) { }
--#endif
- 
- static struct resource spi_resources[] = {
- 	{
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -30,26 +30,6 @@ enum bcm63xx_regs_spi {
- 	SPI_RX_DATA,
- };
- 
--#define __GEN_SPI_RSET_BASE(__cpu, __rset)				\
--	case SPI_## __rset:						\
--		return SPI_## __cpu ##_## __rset;
--
--#define __GEN_SPI_RSET(__cpu)						\
--	switch (reg) {							\
--	__GEN_SPI_RSET_BASE(__cpu, CMD)					\
--	__GEN_SPI_RSET_BASE(__cpu, INT_STATUS)				\
--	__GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)				\
--	__GEN_SPI_RSET_BASE(__cpu, INT_MASK)				\
--	__GEN_SPI_RSET_BASE(__cpu, ST)					\
--	__GEN_SPI_RSET_BASE(__cpu, CLK_CFG)				\
--	__GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)				\
--	__GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)				\
--	__GEN_SPI_RSET_BASE(__cpu, RX_TAIL)				\
--	__GEN_SPI_RSET_BASE(__cpu, MSG_CTL)				\
--	__GEN_SPI_RSET_BASE(__cpu, MSG_DATA)				\
--	__GEN_SPI_RSET_BASE(__cpu, RX_DATA)				\
--	}
--
- #define __GEN_SPI_REGS_TABLE(__cpu)					\
- 	[SPI_CMD]		= SPI_## __cpu ##_CMD,			\
- 	[SPI_INT_STATUS]	= SPI_## __cpu ##_INT_STATUS,		\
-@@ -66,20 +46,9 @@ enum bcm63xx_regs_spi {
- 
- static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
- 	extern const unsigned long *bcm63xx_regs_spi;
- 
- 	return bcm63xx_regs_spi[reg];
--#else
--#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
--	__GEN_SPI_RSET(6348)
--#endif
--#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
--	defined(CONFIG_BCM63XX_CPU_6368)
--	__GEN_SPI_RSET(6358)
--#endif
--#endif
--	return 0;
- }
- 
- #endif /* BCM63XX_DEV_SPI_H */
diff --git a/target/linux/brcm63xx/patches-3.14/015-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch b/target/linux/brcm63xx/patches-3.14/015-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
deleted file mode 100644
index 0dba2e2f1e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/015-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From ed6c71de07ad042691ec02e9eb97375ddc91ed01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:45:22 +0100
-Subject: [PATCH 6/8] MIPS: BCM63XX: remove !RUNTIME_DETECT usage from enet
- code
-
----
- arch/mips/bcm63xx/dev-enet.c                       |  4 --
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    | 46 ----------------------
- 2 files changed, 50 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -14,7 +14,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- 
--#ifdef BCMCPU_RUNTIME_DETECT
- static const unsigned long bcm6348_regs_enetdmac[] = {
- 	[ENETDMAC_CHANCFG]	= ENETDMAC_CHANCFG_REG,
- 	[ENETDMAC_IR]		= ENETDMAC_IR_REG,
-@@ -43,9 +42,6 @@ static __init void bcm63xx_enetdmac_regs
- 	else
- 		bcm63xx_regs_enetdmac = bcm6348_regs_enetdmac;
- }
--#else
--static __init void bcm63xx_enetdmac_regs_init(void) { }
--#endif
- 
- static struct resource shared_res[] = {
- 	{
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -112,55 +112,9 @@ enum bcm63xx_regs_enetdmac {
- 
- static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
- 	extern const unsigned long *bcm63xx_regs_enetdmac;
- 
- 	return bcm63xx_regs_enetdmac[reg];
--#else
--#ifdef CONFIG_BCM63XX_CPU_6345
--	switch (reg) {
--	case ENETDMAC_CHANCFG:
--		return ENETDMA_6345_CHANCFG_REG;
--	case ENETDMAC_IR:
--		return ENETDMA_6345_IR_REG;
--	case ENETDMAC_IRMASK:
--		return ENETDMA_6345_IRMASK_REG;
--	case ENETDMAC_MAXBURST:
--		return ENETDMA_6345_MAXBURST_REG;
--	case ENETDMAC_BUFALLOC:
--		return ENETDMA_6345_BUFALLOC_REG;
--	case ENETDMAC_RSTART:
--		return ENETDMA_6345_RSTART_REG;
--	case ENETDMAC_FC:
--		return ENETDMA_6345_FC_REG;
--	case ENETDMAC_LEN:
--		return ENETDMA_6345_LEN_REG;
--	}
--#endif
--#if defined(CONFIG_BCM63XX_CPU_6328) || \
--	defined(CONFIG_BCM63XX_CPU_6338) || \
--	defined(CONFIG_BCM63XX_CPU_6348) || \
--	defined(CONFIG_BCM63XX_CPU_6358) || \
--	defined(CONFIG_BCM63XX_CPU_6362) || \
--	defined(CONFIG_BCM63XX_CPU_6368)
--	switch (reg) {
--	case ENETDMAC_CHANCFG:
--		return ENETDMAC_CHANCFG_REG;
--	case ENETDMAC_IR:
--		return ENETDMAC_IR_REG;
--	case ENETDMAC_IRMASK:
--		return ENETDMAC_IRMASK_REG;
--	case ENETDMAC_MAXBURST:
--		return ENETDMAC_MAXBURST_REG;
--	case ENETDMAC_BUFALLOC:
--	case ENETDMAC_RSTART:
--	case ENETDMAC_FC:
--	case ENETDMAC_LEN:
--		return 0;
--	}
--#endif
--#endif
--	return 0;
- }
- 
- 
diff --git a/target/linux/brcm63xx/patches-3.14/016-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch b/target/linux/brcm63xx/patches-3.14/016-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
deleted file mode 100644
index 6316b8dee5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/016-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 12c6957004d6770f4b34d59d8a3cafd5d8bfce15 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 14:06:12 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: remove !RUNTIME_DETECT in
- cpu-feature-overrides
-
-All three SoCs have in common they have a BMIPS32/BMIPS3300 CPU, so
-we can replace this as no SoC with BMIPS4350 support enabled.
----
- arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-@@ -24,7 +24,7 @@
- #define cpu_has_smartmips		0
- #define cpu_has_vtag_icache		0
- 
--#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
-+#if !defined(CONFIG_SYS_HAS_CPU_BMIPS4350)
- #define cpu_has_dc_aliases		0
- #endif
- 
diff --git a/target/linux/brcm63xx/patches-3.14/017-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch b/target/linux/brcm63xx/patches-3.14/017-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
deleted file mode 100644
index e40cfa02b7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/017-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 78c3d2e796a28ad55f6c2310a11ab22e91bb52fc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:30:44 +0100
-Subject: [PATCH 8/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code for
- bcmcpu_get_id
-
-Use the same pattern as with get_*_cpu_type() to allow the compiler
-to remove code for non enabled devices.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          |  11 +--
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 120 +++++++----------------
- 2 files changed, 38 insertions(+), 93 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,9 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
- 
--static u16 bcm63xx_cpu_id;
-+u16 bcm63xx_cpu_id __read_mostly;
-+EXPORT_SYMBOL(bcm63xx_cpu_id);
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -97,13 +99,6 @@ static const int bcm6368_irqs[] = {
- 
- };
- 
--u16 __bcm63xx_get_cpu_id(void)
--{
--	return bcm63xx_cpu_id;
--}
--
--EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
--
- u8 bcm63xx_get_cpu_rev(void)
- {
- 	return bcm63xx_cpu_rev;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -19,118 +19,68 @@
- #define BCM6368_CPU_ID		0x6368
- 
- void __init bcm63xx_cpu_init(void);
--u16 __bcm63xx_get_cpu_id(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- 
-+static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+{
-+	switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM3368_CPU_ID
--# endif
--# define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
--#else
--# define BCMCPU_IS_3368()	(0)
-+		case BCM3368_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6328
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6328_CPU_ID
--# endif
--# define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
--#else
--# define BCMCPU_IS_6328()	(0)
-+		case BCM6328_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6338
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6338_CPU_ID
--# endif
--# define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
--#else
--# define BCMCPU_IS_6338()	(0)
-+		case BCM6338_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6345
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6345_CPU_ID
--# endif
--# define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
--#else
--# define BCMCPU_IS_6345()	(0)
-+		case BCM6345_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6348
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6348_CPU_ID
--# endif
--# define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
--#else
--# define BCMCPU_IS_6348()	(0)
-+		case BCM6348_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6358_CPU_ID
--# endif
--# define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
--#else
--# define BCMCPU_IS_6358()	(0)
-+		case BCM6358_CPU_ID:
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6362
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6362_CPU_ID
--# endif
--# define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
--#else
--# define BCMCPU_IS_6362()	(0)
-+		case BCM6362_CPU_ID:
- #endif
- 
--
- #ifdef CONFIG_BCM63XX_CPU_6368
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()	BCM6368_CPU_ID
--# endif
--# define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
--#else
--# define BCMCPU_IS_6368()	(0)
--#endif
--
--#ifndef bcm63xx_get_cpu_id
--#error "No CPU support configured"
-+		case BCM6368_CPU_ID:
- #endif
-+		break;
-+	default:
-+		unreachable();
-+	}
-+
-+	return cpu_id;
-+}
-+
-+extern u16 bcm63xx_cpu_id;
-+
-+static inline u16 __pure bcm63xx_get_cpu_id(void)
-+{
-+	const u16 cpu_id = bcm63xx_cpu_id;
-+
-+	return __bcm63xx_get_cpu_id(cpu_id);
-+}
-+
-+#define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
-+#define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
-+#define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-+#define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
-+#define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
-+#define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
-+#define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
- 
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/018-MIPS-BCM63XX-add-width-to-__dispatch_internal.patch b/target/linux/brcm63xx/patches-3.14/018-MIPS-BCM63XX-add-width-to-__dispatch_internal.patch
deleted file mode 100644
index dc8f8b3c1f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/018-MIPS-BCM63XX-add-width-to-__dispatch_internal.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From a2015bfad293a7eb79519beb60381cb996c6e298 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 21 Mar 2013 17:05:15 +0100
-Subject: [PATCH 01/10] MIPS: BCM63XX: add width to __dispatch_internal
-
-Make it follow the same naming convention as the other functions.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,7 +19,7 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
--static void __dispatch_internal(void) __maybe_unused;
-+static void __dispatch_internal_32(void) __maybe_unused;
- static void __dispatch_internal_64(void) __maybe_unused;
- static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
-@@ -117,7 +117,7 @@ static void bcm63xx_init_irq(void)
- 	}
- 
- 	if (irq_bits == 32) {
--		dispatch_internal = __dispatch_internal;
-+		dispatch_internal = __dispatch_internal_32;
- 		internal_irq_mask = __internal_irq_mask_32;
- 		internal_irq_unmask = __internal_irq_unmask_32;
- 	} else {
-@@ -149,7 +149,7 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal(void)
-+static void __dispatch_internal_32(void)
- {
- 	u32 pending;
- 	static int i;
diff --git a/target/linux/brcm63xx/patches-3.14/019-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch b/target/linux/brcm63xx/patches-3.14/019-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
deleted file mode 100644
index c9dc4cea46..0000000000
--- a/target/linux/brcm63xx/patches-3.14/019-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From 6e79c6dd02aa56e37eb071797f0eb5e3fb588cba Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:52:53 +0100
-Subject: [PATCH 02/10] MIPS: BCM63XX: move bcm63xx_init_irq down
-
-Allows up to drop the prototypes from the top.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 190 +++++++++++++++++++++++-------------------------
- 1 file changed, 92 insertions(+), 98 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,13 +19,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
--static void __dispatch_internal_32(void) __maybe_unused;
--static void __dispatch_internal_64(void) __maybe_unused;
--static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
--static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
--
- static u32 irq_stat_addr, irq_mask_addr;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
-@@ -35,97 +28,6 @@ static unsigned int ext_irq_cfg_reg1, ex
- static void (*internal_irq_mask)(unsigned int irq);
- static void (*internal_irq_unmask)(unsigned int irq);
- 
--static void bcm63xx_init_irq(void)
--{
--	int irq_bits;
--
--	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
--
--	switch (bcm63xx_get_cpu_id()) {
--	case BCM3368_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_3368_REG;
--		irq_mask_addr += PERF_IRQMASK_3368_REG;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
--		break;
--	case BCM6328_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6328_REG;
--		irq_mask_addr += PERF_IRQMASK_6328_REG;
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
--		break;
--	case BCM6338_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6338_REG;
--		irq_mask_addr += PERF_IRQMASK_6338_REG;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
--		break;
--	case BCM6345_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6345_REG;
--		irq_mask_addr += PERF_IRQMASK_6345_REG;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
--		break;
--	case BCM6348_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6348_REG;
--		irq_mask_addr += PERF_IRQMASK_6348_REG;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
--		break;
--	case BCM6358_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6358_REG;
--		irq_mask_addr += PERF_IRQMASK_6358_REG;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
--		break;
--	case BCM6362_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6362_REG;
--		irq_mask_addr += PERF_IRQMASK_6362_REG;
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
--		break;
--	case BCM6368_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6368_REG;
--		irq_mask_addr += PERF_IRQMASK_6368_REG;
--		irq_bits = 64;
--		ext_irq_count = 6;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
--		break;
--	default:
--		BUG();
--	}
--
--	if (irq_bits == 32) {
--		dispatch_internal = __dispatch_internal_32;
--		internal_irq_mask = __internal_irq_mask_32;
--		internal_irq_unmask = __internal_irq_unmask_32;
--	} else {
--		dispatch_internal = __dispatch_internal_64;
--		internal_irq_mask = __internal_irq_mask_64;
--		internal_irq_unmask = __internal_irq_unmask_64;
--	}
--}
- 
- static inline u32 get_ext_irq_perf_reg(int irq)
- {
-@@ -451,6 +353,98 @@ static struct irqaction cpu_ext_cascade_
- 	.flags		= IRQF_NO_THREAD,
- };
- 
-+static void bcm63xx_init_irq(void)
-+{
-+	int irq_bits;
-+
-+	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
-+	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-+
-+	switch (bcm63xx_get_cpu_id()) {
-+	case BCM3368_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_3368_REG;
-+		irq_mask_addr += PERF_IRQMASK_3368_REG;
-+		irq_bits = 32;
-+		ext_irq_count = 4;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+		break;
-+	case BCM6328_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6328_REG;
-+		irq_mask_addr += PERF_IRQMASK_6328_REG;
-+		irq_bits = 64;
-+		ext_irq_count = 4;
-+		is_ext_irq_cascaded = 1;
-+		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+		break;
-+	case BCM6338_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6338_REG;
-+		irq_mask_addr += PERF_IRQMASK_6338_REG;
-+		irq_bits = 32;
-+		ext_irq_count = 4;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+		break;
-+	case BCM6345_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6345_REG;
-+		irq_mask_addr += PERF_IRQMASK_6345_REG;
-+		irq_bits = 32;
-+		ext_irq_count = 4;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+		break;
-+	case BCM6348_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6348_REG;
-+		irq_mask_addr += PERF_IRQMASK_6348_REG;
-+		irq_bits = 32;
-+		ext_irq_count = 4;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+		break;
-+	case BCM6358_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6358_REG;
-+		irq_mask_addr += PERF_IRQMASK_6358_REG;
-+		irq_bits = 32;
-+		ext_irq_count = 4;
-+		is_ext_irq_cascaded = 1;
-+		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+		break;
-+	case BCM6362_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6362_REG;
-+		irq_mask_addr += PERF_IRQMASK_6362_REG;
-+		irq_bits = 64;
-+		ext_irq_count = 4;
-+		is_ext_irq_cascaded = 1;
-+		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+		break;
-+	case BCM6368_CPU_ID:
-+		irq_stat_addr += PERF_IRQSTAT_6368_REG;
-+		irq_mask_addr += PERF_IRQMASK_6368_REG;
-+		irq_bits = 64;
-+		ext_irq_count = 6;
-+		is_ext_irq_cascaded = 1;
-+		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
-+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
-+		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	if (irq_bits == 32) {
-+		dispatch_internal = __dispatch_internal_32;
-+		internal_irq_mask = __internal_irq_mask_32;
-+		internal_irq_unmask = __internal_irq_unmask_32;
-+	} else {
-+		dispatch_internal = __dispatch_internal_64;
-+		internal_irq_mask = __internal_irq_mask_64;
-+		internal_irq_unmask = __internal_irq_unmask_64;
-+	}
-+}
-+
- void __init arch_init_irq(void)
- {
- 	int i;
diff --git a/target/linux/brcm63xx/patches-3.14/020-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch b/target/linux/brcm63xx/patches-3.14/020-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
deleted file mode 100644
index 021d0d9537..0000000000
--- a/target/linux/brcm63xx/patches-3.14/020-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 39b46ed1c9fe71890566e129d9ac5feb8421b3b4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 18 Apr 2013 21:14:49 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: replace irq dispatch code with a generic
- version
-
-The generic version uses a variable length of u32 registers instead of u32/u64.
-This allows easier support for "wider" registers without having to rewrite
-everything.
-
-This "generic" version is as fast as the old version in the best case
-(i == next set bit), and twice as fast in the worst case in 64 bits.
-
-Using a macro was chosen over a (forced) inline version because gcc generated
-more compact code with the macro.
-
-The change from (signed) int to unsigned int for i and to_call was intentional
-as the value can be only between 0 and (width - 1) anyway, and allowed gcc to
-optimise the code a bit further.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 130 +++++++++++++++++++++---------------------------
- 1 file changed, 56 insertions(+), 74 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -51,47 +51,65 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal_32(void)
--{
--	u32 pending;
--	static int i;
--
--	pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
--
--	if (!pending)
--		return ;
--
--	while (1) {
--		int to_call = i;
- 
--		i = (i + 1) & 0x1f;
--		if (pending & (1 << to_call)) {
--			handle_internal(to_call);
--			break;
--		}
--	}
-+#define BUILD_IPIC_INTERNAL(width)					\
-+void __dispatch_internal_##width(void)					\
-+{									\
-+	u32 pending[width / 32];					\
-+	unsigned int src, tgt;						\
-+	bool irqs_pending = false;					\
-+	static unsigned int i;						\
-+									\
-+	/* read registers in reverse order */				\
-+	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
-+		u32 val;						\
-+									\
-+		val = bcm_readl(irq_stat_addr + src * sizeof(u32));	\
-+		val &= bcm_readl(irq_mask_addr + src * sizeof(u32));	\
-+		pending[--tgt] = val;					\
-+									\
-+		if (val)						\
-+			irqs_pending = true;				\
-+	}								\
-+									\
-+	if (!irqs_pending)						\
-+		return;							\
-+									\
-+	while (1) {							\
-+		unsigned int to_call = i;				\
-+									\
-+		i = (i + 1) & (width - 1);				\
-+		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
-+			handle_internal(to_call);			\
-+			break;						\
-+		}							\
-+	}								\
-+}									\
-+									\
-+static void __internal_irq_mask_##width(unsigned int irq)		\
-+{									\
-+	u32 val;							\
-+	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
-+	unsigned bit = irq & 0x1f;					\
-+									\
-+	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
-+	val &= ~(1 << bit);						\
-+	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
-+}									\
-+									\
-+static void __internal_irq_unmask_##width(unsigned int irq)		\
-+{									\
-+	u32 val;							\
-+	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
-+	unsigned bit = irq & 0x1f;					\
-+									\
-+	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
-+	val |= (1 << bit);						\
-+	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
- }
- 
--static void __dispatch_internal_64(void)
--{
--	u64 pending;
--	static int i;
--
--	pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
--
--	if (!pending)
--		return ;
--
--	while (1) {
--		int to_call = i;
--
--		i = (i + 1) & 0x3f;
--		if (pending & (1ull << to_call)) {
--			handle_internal(to_call);
--			break;
--		}
--	}
--}
-+BUILD_IPIC_INTERNAL(32);
-+BUILD_IPIC_INTERNAL(64);
- 
- asmlinkage void plat_irq_dispatch(void)
- {
-@@ -128,42 +146,6 @@ asmlinkage void plat_irq_dispatch(void)
-  * internal IRQs operations: only mask/unmask on PERF irq mask
-  * register.
-  */
--static void __internal_irq_mask_32(unsigned int irq)
--{
--	u32 mask;
--
--	mask = bcm_readl(irq_mask_addr);
--	mask &= ~(1 << irq);
--	bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_mask_64(unsigned int irq)
--{
--	u64 mask;
--
--	mask = bcm_readq(irq_mask_addr);
--	mask &= ~(1ull << irq);
--	bcm_writeq(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_32(unsigned int irq)
--{
--	u32 mask;
--
--	mask = bcm_readl(irq_mask_addr);
--	mask |= (1 << irq);
--	bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_64(unsigned int irq)
--{
--	u64 mask;
--
--	mask = bcm_readq(irq_mask_addr);
--	mask |= (1ull << irq);
--	bcm_writeq(mask, irq_mask_addr);
--}
--
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
- 	internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
diff --git a/target/linux/brcm63xx/patches-3.14/021-MIPS-BCM63XX-append-irq-line-to-irq_-stat-mask.patch b/target/linux/brcm63xx/patches-3.14/021-MIPS-BCM63XX-append-irq-line-to-irq_-stat-mask.patch
deleted file mode 100644
index 5b634883e1..0000000000
--- a/target/linux/brcm63xx/patches-3.14/021-MIPS-BCM63XX-append-irq-line-to-irq_-stat-mask.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From 96ce0a9d195b2781d6f8d919dea8056b1c409703 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:24:06 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: append irq line to irq_{stat,mask}*
-
-The SMP capable irq controllers have two interrupt output pins which are
-controlled through separate registers, so make the variables arrays.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           | 51 ++++++++++++-----------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 +++----
- 2 files changed, 34 insertions(+), 33 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,7 +19,8 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
--static u32 irq_stat_addr, irq_mask_addr;
-+static u32 irq_stat_addr[2];
-+static u32 irq_mask_addr[2];
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
-@@ -64,8 +65,8 @@ void __dispatch_internal_##width(void)
- 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
- 		u32 val;						\
- 									\
--		val = bcm_readl(irq_stat_addr + src * sizeof(u32));	\
--		val &= bcm_readl(irq_mask_addr + src * sizeof(u32));	\
-+		val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));	\
-+		val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32));	\
- 		pending[--tgt] = val;					\
- 									\
- 		if (val)						\
-@@ -92,9 +93,9 @@ static void __internal_irq_mask_##width(
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 									\
--	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
-+	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
- 	val &= ~(1 << bit);						\
--	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
-+	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
- }									\
- 									\
- static void __internal_irq_unmask_##width(unsigned int irq)		\
-@@ -103,9 +104,9 @@ static void __internal_irq_unmask_##widt
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 									\
--	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
-+	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
- 	val |= (1 << bit);						\
--	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
-+	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
- }
- 
- BUILD_IPIC_INTERNAL(32);
-@@ -339,20 +340,20 @@ static void bcm63xx_init_irq(void)
- {
- 	int irq_bits;
- 
--	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-+	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
-+	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM3368_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_3368_REG;
--		irq_mask_addr += PERF_IRQMASK_3368_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
-+		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
- 		break;
- 	case BCM6328_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6328_REG;
--		irq_mask_addr += PERF_IRQMASK_6328_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
-+		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
- 		irq_bits = 64;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -361,29 +362,29 @@ static void bcm63xx_init_irq(void)
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
- 		break;
- 	case BCM6338_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6338_REG;
--		irq_mask_addr += PERF_IRQMASK_6338_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
-+		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
- 		break;
- 	case BCM6345_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6345_REG;
--		irq_mask_addr += PERF_IRQMASK_6345_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
-+		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
- 		break;
- 	case BCM6348_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6348_REG;
--		irq_mask_addr += PERF_IRQMASK_6348_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
-+		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
- 		break;
- 	case BCM6358_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6358_REG;
--		irq_mask_addr += PERF_IRQMASK_6358_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
-+		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -392,8 +393,8 @@ static void bcm63xx_init_irq(void)
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
- 		break;
- 	case BCM6362_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6362_REG;
--		irq_mask_addr += PERF_IRQMASK_6362_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
-+		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
- 		irq_bits = 64;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -402,8 +403,8 @@ static void bcm63xx_init_irq(void)
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
- 		break;
- 	case BCM6368_CPU_ID:
--		irq_stat_addr += PERF_IRQSTAT_6368_REG;
--		irq_mask_addr += PERF_IRQMASK_6368_REG;
-+		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
-+		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
- 		irq_bits = 64;
- 		ext_irq_count = 6;
- 		is_ext_irq_cascaded = 1;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -215,23 +215,23 @@
- 
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG		0xc
--#define PERF_IRQMASK_6328_REG		0x20
-+#define PERF_IRQMASK_6328_REG(x)	(0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG		0xc
- #define PERF_IRQMASK_6345_REG		0xc
- #define PERF_IRQMASK_6348_REG		0xc
--#define PERF_IRQMASK_6358_REG		0xc
--#define PERF_IRQMASK_6362_REG		0x20
--#define PERF_IRQMASK_6368_REG		0x20
-+#define PERF_IRQMASK_6358_REG(x)	(0xc + (x) * 0x2c)
-+#define PERF_IRQMASK_6362_REG(x)	(0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_6368_REG(x)	(0x20 + (x) * 0x10)
- 
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG		0x10
--#define PERF_IRQSTAT_6328_REG		0x28
-+#define PERF_IRQSTAT_6328_REG(x)	(0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG		0x10
- #define PERF_IRQSTAT_6345_REG		0x10
- #define PERF_IRQSTAT_6348_REG		0x10
--#define PERF_IRQSTAT_6358_REG		0x10
--#define PERF_IRQSTAT_6362_REG		0x28
--#define PERF_IRQSTAT_6368_REG		0x28
-+#define PERF_IRQSTAT_6358_REG(x)	(0x10 + (x) * 0x2c)
-+#define PERF_IRQSTAT_6362_REG(x)	(0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_6368_REG(x)	(0x28 + (x) * 0x10)
- 
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368	0x14
diff --git a/target/linux/brcm63xx/patches-3.14/022-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch b/target/linux/brcm63xx/patches-3.14/022-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
deleted file mode 100644
index 5f94583433..0000000000
--- a/target/linux/brcm63xx/patches-3.14/022-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From ff61c72a7a260ab4c4abbddb72c3cd2aea5e0687 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:31:29 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: populate irq_{stat,mask}_addr for second
- cpu
-
-Set it to zero if there is no second set.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -342,11 +342,15 @@ static void bcm63xx_init_irq(void)
- 
- 	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
- 	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
-+	irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+	irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM3368_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
- 		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
-+		irq_stat_addr[1] = 0;
-+		irq_stat_addr[1] = 0;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-@@ -354,6 +358,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6328_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
- 		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
-+		irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
-+		irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
- 		irq_bits = 64;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -364,6 +370,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6338_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
- 		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
-+		irq_stat_addr[1] = 0;
-+		irq_mask_addr[1] = 0;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-@@ -371,6 +379,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6345_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
- 		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
-+		irq_stat_addr[1] = 0;
-+		irq_mask_addr[1] = 0;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-@@ -378,6 +388,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6348_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
- 		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
-+		irq_stat_addr[1] = 0;
-+		irq_mask_addr[1] = 0;
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-@@ -385,6 +397,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6358_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
- 		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
-+		irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
-+		irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
- 		irq_bits = 32;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -395,6 +409,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6362_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
- 		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
-+		irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
-+		irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
- 		irq_bits = 64;
- 		ext_irq_count = 4;
- 		is_ext_irq_cascaded = 1;
-@@ -405,6 +421,8 @@ static void bcm63xx_init_irq(void)
- 	case BCM6368_CPU_ID:
- 		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
- 		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
-+		irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
-+		irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
- 		irq_bits = 64;
- 		ext_irq_count = 6;
- 		is_ext_irq_cascaded = 1;
diff --git a/target/linux/brcm63xx/patches-3.14/023-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch b/target/linux/brcm63xx/patches-3.14/023-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch
deleted file mode 100644
index 395dc13d8d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/023-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 43ebef8162adfa7789cb915e60e46103965d7efd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 11:21:16 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add cpu argument to dispatch internal
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,9 +19,10 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
-+
- static u32 irq_stat_addr[2];
- static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(void);
-+static void (*dispatch_internal)(int cpu);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
-@@ -54,19 +55,20 @@ static inline void handle_internal(int i
-  */
- 
- #define BUILD_IPIC_INTERNAL(width)					\
--void __dispatch_internal_##width(void)					\
-+void __dispatch_internal_##width(int cpu)				\
- {									\
- 	u32 pending[width / 32];					\
- 	unsigned int src, tgt;						\
- 	bool irqs_pending = false;					\
--	static unsigned int i;						\
-+	static unsigned int i[2];					\
-+	unsigned int *next = &i[cpu];					\
- 									\
- 	/* read registers in reverse order */				\
- 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
- 		u32 val;						\
- 									\
--		val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));	\
--		val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32));	\
-+		val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
-+		val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
- 		pending[--tgt] = val;					\
- 									\
- 		if (val)						\
-@@ -77,9 +79,9 @@ void __dispatch_internal_##width(void)
- 		return;							\
- 									\
- 	while (1) {							\
--		unsigned int to_call = i;				\
-+		unsigned int to_call = *next;				\
- 									\
--		i = (i + 1) & (width - 1);				\
-+		*next = (*next + 1) & (width - 1);			\
- 		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
- 			handle_internal(to_call);			\
- 			break;						\
-@@ -129,7 +131,7 @@ asmlinkage void plat_irq_dispatch(void)
- 		if (cause & CAUSEF_IP1)
- 			do_IRQ(1);
- 		if (cause & CAUSEF_IP2)
--			dispatch_internal();
-+			dispatch_internal(0);
- 		if (!is_ext_irq_cascaded) {
- 			if (cause & CAUSEF_IP3)
- 				do_IRQ(IRQ_EXT_0);
diff --git a/target/linux/brcm63xx/patches-3.14/024-MIPS-BCM63XX-protect-irq-register-accesses.patch b/target/linux/brcm63xx/patches-3.14/024-MIPS-BCM63XX-protect-irq-register-accesses.patch
deleted file mode 100644
index 18669a1aac..0000000000
--- a/target/linux/brcm63xx/patches-3.14/024-MIPS-BCM63XX-protect-irq-register-accesses.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From 5e86f3988854c62c0788e4820caf722fec7c791b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 21 Apr 2013 15:38:56 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: protect irq register accesses
-
-Since we will have the chance of accessing the registers concurrently,
-protect any accesses through a spinlock.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -12,6 +12,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/irq.h>
-+#include <linux/spinlock.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -20,6 +21,9 @@
- #include <bcm63xx_irq.h>
- 
- 
-+static DEFINE_SPINLOCK(ipic_lock);
-+static DEFINE_SPINLOCK(epic_lock);
-+
- static u32 irq_stat_addr[2];
- static u32 irq_mask_addr[2];
- static void (*dispatch_internal)(int cpu);
-@@ -62,8 +66,10 @@ void __dispatch_internal_##width(int cpu
- 	bool irqs_pending = false;					\
- 	static unsigned int i[2];					\
- 	unsigned int *next = &i[cpu];					\
-+	unsigned long flags;						\
- 									\
- 	/* read registers in reverse order */				\
-+	spin_lock_irqsave(&ipic_lock, flags);				\
- 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
- 		u32 val;						\
- 									\
-@@ -74,6 +80,7 @@ void __dispatch_internal_##width(int cpu
- 		if (val)						\
- 			irqs_pending = true;				\
- 	}								\
-+	spin_unlock_irqrestore(&ipic_lock, flags);			\
- 									\
- 	if (!irqs_pending)						\
- 		return;							\
-@@ -94,10 +101,13 @@ static void __internal_irq_mask_##width(
- 	u32 val;							\
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
-+	unsigned long flags;						\
- 									\
-+	spin_lock_irqsave(&ipic_lock, flags);				\
- 	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
- 	val &= ~(1 << bit);						\
- 	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
-+	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }									\
- 									\
- static void __internal_irq_unmask_##width(unsigned int irq)		\
-@@ -105,10 +115,13 @@ static void __internal_irq_unmask_##widt
- 	u32 val;							\
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
-+	unsigned long flags;						\
- 									\
-+	spin_lock_irqsave(&ipic_lock, flags);				\
- 	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
- 	val |= (1 << bit);						\
- 	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
-+	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }
- 
- BUILD_IPIC_INTERNAL(32);
-@@ -167,8 +180,10 @@ static void bcm63xx_external_irq_mask(st
- {
- 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
- 	u32 reg, regaddr;
-+	unsigned long flags;
- 
- 	regaddr = get_ext_irq_perf_reg(irq);
-+	spin_lock_irqsave(&epic_lock, flags);
- 	reg = bcm_perf_readl(regaddr);
- 
- 	if (BCMCPU_IS_6348())
-@@ -177,6 +192,8 @@ static void bcm63xx_external_irq_mask(st
- 		reg &= ~EXTIRQ_CFG_MASK(irq % 4);
- 
- 	bcm_perf_writel(reg, regaddr);
-+	spin_unlock_irqrestore(&epic_lock, flags);
-+
- 	if (is_ext_irq_cascaded)
- 		internal_irq_mask(irq + ext_irq_start);
- }
-@@ -185,8 +202,10 @@ static void bcm63xx_external_irq_unmask(
- {
- 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
- 	u32 reg, regaddr;
-+	unsigned long flags;
- 
- 	regaddr = get_ext_irq_perf_reg(irq);
-+	spin_lock_irqsave(&epic_lock, flags);
- 	reg = bcm_perf_readl(regaddr);
- 
- 	if (BCMCPU_IS_6348())
-@@ -195,6 +214,7 @@ static void bcm63xx_external_irq_unmask(
- 		reg |= EXTIRQ_CFG_MASK(irq % 4);
- 
- 	bcm_perf_writel(reg, regaddr);
-+	spin_unlock_irqrestore(&epic_lock, flags);
- 
- 	if (is_ext_irq_cascaded)
- 		internal_irq_unmask(irq + ext_irq_start);
-@@ -204,8 +224,10 @@ static void bcm63xx_external_irq_clear(s
- {
- 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
- 	u32 reg, regaddr;
-+	unsigned long flags;
- 
- 	regaddr = get_ext_irq_perf_reg(irq);
-+	spin_lock_irqsave(&epic_lock, flags);
- 	reg = bcm_perf_readl(regaddr);
- 
- 	if (BCMCPU_IS_6348())
-@@ -214,6 +236,7 @@ static void bcm63xx_external_irq_clear(s
- 		reg |= EXTIRQ_CFG_CLEAR(irq % 4);
- 
- 	bcm_perf_writel(reg, regaddr);
-+	spin_unlock_irqrestore(&epic_lock, flags);
- }
- 
- static int bcm63xx_external_irq_set_type(struct irq_data *d,
-@@ -222,6 +245,7 @@ static int bcm63xx_external_irq_set_type
- 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
- 	u32 reg, regaddr;
- 	int levelsense, sense, bothedge;
-+	unsigned long flags;
- 
- 	flow_type &= IRQ_TYPE_SENSE_MASK;
- 
-@@ -256,6 +280,7 @@ static int bcm63xx_external_irq_set_type
- 	}
- 
- 	regaddr = get_ext_irq_perf_reg(irq);
-+	spin_lock_irqsave(&epic_lock, flags);
- 	reg = bcm_perf_readl(regaddr);
- 	irq %= 4;
- 
-@@ -300,6 +325,7 @@ static int bcm63xx_external_irq_set_type
- 	}
- 
- 	bcm_perf_writel(reg, regaddr);
-+	spin_unlock_irqrestore(&epic_lock, flags);
- 
- 	irqd_set_trigger_type(d, flow_type);
- 	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
diff --git a/target/linux/brcm63xx/patches-3.14/025-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch b/target/linux/brcm63xx/patches-3.14/025-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
deleted file mode 100644
index 6e8489078e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/025-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 6e74b82aca08a5ecc4d2f0780254468659427e82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:03:15 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: wire up the second cpu's irq line
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 44 +++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 37 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -102,11 +102,17 @@ static void __internal_irq_mask_##width(
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 	unsigned long flags;						\
-+	int cpu;							\
- 									\
- 	spin_lock_irqsave(&ipic_lock, flags);				\
--	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
--	val &= ~(1 << bit);						\
--	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
-+	for_each_present_cpu(cpu) {					\
-+		if (!irq_mask_addr[cpu])				\
-+			break;						\
-+									\
-+		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
-+		val &= ~(1 << bit);					\
-+		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
-+	}								\
- 	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }									\
- 									\
-@@ -116,11 +122,20 @@ static void __internal_irq_unmask_##widt
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 	unsigned long flags;						\
-+	int cpu;							\
- 									\
- 	spin_lock_irqsave(&ipic_lock, flags);				\
--	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
--	val |= (1 << bit);						\
--	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
-+	for_each_present_cpu(cpu) {					\
-+		if (!irq_mask_addr[cpu])				\
-+			break;						\
-+									\
-+		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
-+		if (cpu_online(cpu))					\
-+			val |= (1 << bit);				\
-+		else							\
-+			val &= ~(1 << bit);				\
-+		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
-+	}								\
- 	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }
- 
-@@ -145,7 +160,10 @@ asmlinkage void plat_irq_dispatch(void)
- 			do_IRQ(1);
- 		if (cause & CAUSEF_IP2)
- 			dispatch_internal(0);
--		if (!is_ext_irq_cascaded) {
-+		if (is_ext_irq_cascaded) {
-+			if (cause & CAUSEF_IP3)
-+				dispatch_internal(1);
-+		} else {
- 			if (cause & CAUSEF_IP3)
- 				do_IRQ(IRQ_EXT_0);
- 			if (cause & CAUSEF_IP4)
-@@ -358,6 +376,14 @@ static struct irqaction cpu_ip2_cascade_
- 	.flags		= IRQF_NO_THREAD,
- };
- 
-+#ifdef CONFIG_SMP
-+static struct irqaction cpu_ip3_cascade_action = {
-+	.handler	= no_action,
-+	.name		= "cascade_ip3",
-+	.flags		= IRQF_NO_THREAD,
-+};
-+#endif
-+
- static struct irqaction cpu_ext_cascade_action = {
- 	.handler	= no_action,
- 	.name		= "cascade_extirq",
-@@ -494,4 +520,8 @@ void __init arch_init_irq(void)
- 	}
- 
- 	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
-+#ifdef CONFIG_SMP
-+	if (is_ext_irq_cascaded)
-+		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
-+#endif
- }
diff --git a/target/linux/brcm63xx/patches-3.14/026-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch b/target/linux/brcm63xx/patches-3.14/026-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
deleted file mode 100644
index fc07b4bb2c..0000000000
--- a/target/linux/brcm63xx/patches-3.14/026-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From e23dc903cd69d32d407ea1b7310bc9a71e00d359 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 30 Apr 2013 11:26:53 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: use irq_desc as argument for (un)mask
-
-In preparation for applying affinity, use the irq descriptor as the
-argument for (un)mask.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -31,8 +31,8 @@ static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
- static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(unsigned int irq);
--static void (*internal_irq_unmask)(unsigned int irq);
-+static void (*internal_irq_mask)(struct irq_data *d);
-+static void (*internal_irq_unmask)(struct irq_data *d);
- 
- 
- static inline u32 get_ext_irq_perf_reg(int irq)
-@@ -96,9 +96,10 @@ void __dispatch_internal_##width(int cpu
- 	}								\
- }									\
- 									\
--static void __internal_irq_mask_##width(unsigned int irq)		\
-+static void __internal_irq_mask_##width(struct irq_data *d)		\
- {									\
- 	u32 val;							\
-+	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 	unsigned long flags;						\
-@@ -116,9 +117,10 @@ static void __internal_irq_mask_##width(
- 	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }									\
- 									\
--static void __internal_irq_unmask_##width(unsigned int irq)		\
-+static void __internal_irq_unmask_##width(struct irq_data *d)		\
- {									\
- 	u32 val;							\
-+	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
- 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
- 	unsigned bit = irq & 0x1f;					\
- 	unsigned long flags;						\
-@@ -182,12 +184,12 @@ asmlinkage void plat_irq_dispatch(void)
-  */
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
--	internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
-+	internal_irq_mask(d);
- }
- 
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
--	internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
-+	internal_irq_unmask(d);
- }
- 
- /*
-@@ -213,7 +215,7 @@ static void bcm63xx_external_irq_mask(st
- 	spin_unlock_irqrestore(&epic_lock, flags);
- 
- 	if (is_ext_irq_cascaded)
--		internal_irq_mask(irq + ext_irq_start);
-+		internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
- }
- 
- static void bcm63xx_external_irq_unmask(struct irq_data *d)
-@@ -235,7 +237,7 @@ static void bcm63xx_external_irq_unmask(
- 	spin_unlock_irqrestore(&epic_lock, flags);
- 
- 	if (is_ext_irq_cascaded)
--		internal_irq_unmask(irq + ext_irq_start);
-+		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
- }
- 
- static void bcm63xx_external_irq_clear(struct irq_data *d)
diff --git a/target/linux/brcm63xx/patches-3.14/027-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch b/target/linux/brcm63xx/patches-3.14/027-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
deleted file mode 100644
index a625b2e67b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/027-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 23493b47d8caaa59b18627a01bf443c3b50bb530 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:06:03 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting affinity for IPIC
-
-Wire up the set_affinity call for the internal PIC if booting on
-a cpu supporting it.
-Affinity is kept to boot cpu as default.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 46 ++++++++++++++++++++++++++++++++++++++++------
- 1 file changed, 40 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -32,7 +32,7 @@ static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
- static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
- static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d);
-+static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
- 
- 
- static inline u32 get_ext_irq_perf_reg(int irq)
-@@ -51,6 +51,20 @@ static inline void handle_internal(int i
- 		do_IRQ(intbit + IRQ_INTERNAL_BASE);
- }
- 
-+static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
-+				     const struct cpumask *m)
-+{
-+	bool enable = cpu_online(cpu);
-+
-+#ifdef CONFIG_SMP
-+	if (m)
-+		enable &= cpu_isset(cpu, *m);
-+	else if (irqd_affinity_was_set(d))
-+		enable &= cpu_isset(cpu, *d->affinity);
-+#endif
-+	return enable;
-+}
-+
- /*
-  * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-  * prioritize any interrupt relatively to another. the static counter
-@@ -117,7 +131,8 @@ static void __internal_irq_mask_##width(
- 	spin_unlock_irqrestore(&ipic_lock, flags);			\
- }									\
- 									\
--static void __internal_irq_unmask_##width(struct irq_data *d)		\
-+static void __internal_irq_unmask_##width(struct irq_data *d,		\
-+					  const struct cpumask *m)	\
- {									\
- 	u32 val;							\
- 	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
-@@ -132,7 +147,7 @@ static void __internal_irq_unmask_##widt
- 			break;						\
- 									\
- 		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--		if (cpu_online(cpu))					\
-+		if (enable_irq_for_cpu(cpu, d, m))			\
- 			val |= (1 << bit);				\
- 		else							\
- 			val &= ~(1 << bit);				\
-@@ -189,7 +204,7 @@ static void bcm63xx_internal_irq_mask(st
- 
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
--	internal_irq_unmask(d);
-+	internal_irq_unmask(d, NULL);
- }
- 
- /*
-@@ -237,7 +252,8 @@ static void bcm63xx_external_irq_unmask(
- 	spin_unlock_irqrestore(&epic_lock, flags);
- 
- 	if (is_ext_irq_cascaded)
--		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
-+		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
-+				    NULL);
- }
- 
- static void bcm63xx_external_irq_clear(struct irq_data *d)
-@@ -356,6 +372,18 @@ static int bcm63xx_external_irq_set_type
- 	return IRQ_SET_MASK_OK_NOCOPY;
- }
- 
-+#ifdef CONFIG_SMP
-+static int bcm63xx_internal_set_affinity(struct irq_data *data,
-+					 const struct cpumask *dest,
-+					 bool force)
-+{
-+	if (!irqd_irq_disabled(data))
-+		internal_irq_unmask(data, dest);
-+
-+	return 0;
-+}
-+#endif
-+
- static struct irq_chip bcm63xx_internal_irq_chip = {
- 	.name		= "bcm63xx_ipic",
- 	.irq_mask	= bcm63xx_internal_irq_mask,
-@@ -523,7 +551,13 @@ void __init arch_init_irq(void)
- 
- 	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
- #ifdef CONFIG_SMP
--	if (is_ext_irq_cascaded)
-+	if (is_ext_irq_cascaded) {
- 		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
-+		bcm63xx_internal_irq_chip.irq_set_affinity =
-+			bcm63xx_internal_set_affinity;
-+
-+		cpumask_clear(irq_default_affinity);
-+		cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
-+	}
- #endif
- }
diff --git a/target/linux/brcm63xx/patches-3.14/030-MIPS-Always-use-IRQ-domains-for-CPU-IRQs.patch b/target/linux/brcm63xx/patches-3.14/030-MIPS-Always-use-IRQ-domains-for-CPU-IRQs.patch
deleted file mode 100644
index 21b69ab1ed..0000000000
--- a/target/linux/brcm63xx/patches-3.14/030-MIPS-Always-use-IRQ-domains-for-CPU-IRQs.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 0f84c305351c993e4307e1e8c128d44760314e31 Mon Sep 17 00:00:00 2001
-From: Andrew Bresticker <abrestic@chromium.org>
-Date: Thu, 18 Sep 2014 14:47:07 -0700
-Subject: [PATCH 1/3] MIPS: Always use IRQ domains for CPU IRQs
-
-Use an IRQ domain for the 8 CPU IRQs in both the DT and non-DT cases.
-
-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
-Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
-Tested-by: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Thomas Gleixner <tglx@linutronix.de>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Andrew Bresticker <abrestic@chromium.org>
-Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: Paul Burton <paul.burton@imgtec.com>
-Cc: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Jonas Gorski <jogo@openwrt.org>
-Cc: John Crispin <blogic@openwrt.org>
-Cc: David Daney <ddaney.cavm@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
-Patchwork: https://patchwork.linux-mips.org/patch/7799/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/Kconfig          |    1 +
- arch/mips/kernel/irq_cpu.c |   36 +++++++++++-------------------------
- 2 files changed, 12 insertions(+), 25 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1026,6 +1026,7 @@ config MIPS_HUGE_TLB_SUPPORT
- 
- config IRQ_CPU
- 	bool
-+	select IRQ_DOMAIN
- 
- config IRQ_CPU_RM7K
- 	bool
---- a/arch/mips/kernel/irq_cpu.c
-+++ b/arch/mips/kernel/irq_cpu.c
-@@ -98,28 +98,6 @@ static struct irq_chip mips_mt_cpu_irq_c
- 	.irq_enable	= unmask_mips_irq,
- };
- 
--void __init mips_cpu_irq_init(void)
--{
--	int irq_base = MIPS_CPU_IRQ_BASE;
--	int i;
--
--	/* Mask interrupts. */
--	clear_c0_status(ST0_IM);
--	clear_c0_cause(CAUSEF_IP);
--
--	/* Software interrupts are used for MT/CMT IPI */
--	for (i = irq_base; i < irq_base + 2; i++)
--		irq_set_chip_and_handler(i, cpu_has_mipsmt ?
--					 &mips_mt_cpu_irq_controller :
--					 &mips_cpu_irq_controller,
--					 handle_percpu_irq);
--
--	for (i = irq_base + 2; i < irq_base + 8; i++)
--		irq_set_chip_and_handler(i, &mips_cpu_irq_controller,
--					 handle_percpu_irq);
--}
--
--#ifdef CONFIG_IRQ_DOMAIN
- static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
- 			     irq_hw_number_t hw)
- {
-@@ -142,8 +120,7 @@ static const struct irq_domain_ops mips_
- 	.xlate = irq_domain_xlate_onecell,
- };
- 
--int __init mips_cpu_intc_init(struct device_node *of_node,
--			      struct device_node *parent)
-+static void __init __mips_cpu_irq_init(struct device_node *of_node)
- {
- 	struct irq_domain *domain;
- 
-@@ -155,7 +132,16 @@ int __init mips_cpu_intc_init(struct dev
- 				       &mips_cpu_intc_irq_domain_ops, NULL);
- 	if (!domain)
- 		panic("Failed to add irqdomain for MIPS CPU");
-+}
- 
-+void __init mips_cpu_irq_init(void)
-+{
-+	__mips_cpu_irq_init(NULL);
-+}
-+
-+int __init mips_cpu_intc_init(struct device_node *of_node,
-+			      struct device_node *parent)
-+{
-+	__mips_cpu_irq_init(of_node);
- 	return 0;
- }
--#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/target/linux/brcm63xx/patches-3.14/031-MIPS-Rename-mips_cpu_intc_init-mips_cpu_irq_of_init.patch b/target/linux/brcm63xx/patches-3.14/031-MIPS-Rename-mips_cpu_intc_init-mips_cpu_irq_of_init.patch
deleted file mode 100644
index 141644f285..0000000000
--- a/target/linux/brcm63xx/patches-3.14/031-MIPS-Rename-mips_cpu_intc_init-mips_cpu_irq_of_init.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From afe8dc254711b72ba8144295f4a8fcc66d30572d Mon Sep 17 00:00:00 2001
-From: Andrew Bresticker <abrestic@chromium.org>
-Date: Thu, 18 Sep 2014 14:47:08 -0700
-Subject: [PATCH 2/3] MIPS: Rename mips_cpu_intc_init() ->
- mips_cpu_irq_of_init()
-
-mips_cpu_intc_init() is used for DT-based initialization of the CPU
-IRQ domain.  Give it a more appropriate name.
-
-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
-Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
-Tested-by: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Thomas Gleixner <tglx@linutronix.de>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Andrew Bresticker <abrestic@chromium.org>
-Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: Paul Burton <paul.burton@imgtec.com>
-Cc: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Jonas Gorski <jogo@openwrt.org>
-Cc: John Crispin <blogic@openwrt.org>
-Cc: David Daney <ddaney.cavm@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
-Patchwork: https://patchwork.linux-mips.org/patch/7800/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- Documentation/devicetree/bindings/mips/cpu_irq.txt |    4 ++--
- arch/mips/include/asm/irq_cpu.h                    |    4 ++--
- arch/mips/kernel/irq_cpu.c                         |    4 ++--
- arch/mips/ralink/irq.c                             |    2 +-
- 4 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
-+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
-@@ -1,6 +1,6 @@
- MIPS CPU interrupt controller
- 
--On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
-+On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
- IRQs from a devicetree file and create a irq_domain for IRQ controller.
- 
- With the irq_domain in place we can describe how the 8 IRQs are wired to the
-@@ -36,7 +36,7 @@ Example devicetree:
- 
- Example platform irq.c:
- static struct of_device_id __initdata of_irq_ids[] = {
--	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
-+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
- 	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
- 	{},
- };
---- a/arch/mips/include/asm/irq_cpu.h
-+++ b/arch/mips/include/asm/irq_cpu.h
-@@ -19,8 +19,8 @@ extern void rm9k_cpu_irq_init(void);
- 
- #ifdef CONFIG_IRQ_DOMAIN
- struct device_node;
--extern int mips_cpu_intc_init(struct device_node *of_node,
--			      struct device_node *parent);
-+extern int mips_cpu_irq_of_init(struct device_node *of_node,
-+				struct device_node *parent);
- #endif
- 
- #endif /* _ASM_IRQ_CPU_H */
---- a/arch/mips/kernel/irq_cpu.c
-+++ b/arch/mips/kernel/irq_cpu.c
-@@ -139,8 +139,8 @@ void __init mips_cpu_irq_init(void)
- 	__mips_cpu_irq_init(NULL);
- }
- 
--int __init mips_cpu_intc_init(struct device_node *of_node,
--			      struct device_node *parent)
-+int __init mips_cpu_irq_of_init(struct device_node *of_node,
-+				struct device_node *parent)
- {
- 	__mips_cpu_irq_init(of_node);
- 	return 0;
---- a/arch/mips/ralink/irq.c
-+++ b/arch/mips/ralink/irq.c
-@@ -173,7 +173,7 @@ static int __init intc_of_init(struct de
- }
- 
- static struct of_device_id __initdata of_irq_ids[] = {
--	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
-+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
- 	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
- 	{},
- };
diff --git a/target/linux/brcm63xx/patches-3.14/032-MIPS-Provide-a-generic-plat_irq_dispatch.patch b/target/linux/brcm63xx/patches-3.14/032-MIPS-Provide-a-generic-plat_irq_dispatch.patch
deleted file mode 100644
index 8f5bd3144f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/032-MIPS-Provide-a-generic-plat_irq_dispatch.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 85f7cdacbb81db8c4cc8e474837eab1f0e4ff77b Mon Sep 17 00:00:00 2001
-From: Andrew Bresticker <abrestic@chromium.org>
-Date: Thu, 18 Sep 2014 14:47:09 -0700
-Subject: [PATCH 3/3] MIPS: Provide a generic plat_irq_dispatch
-
-For platforms which boot with device-tree or have correctly chained
-all external interrupt controllers, a generic plat_irq_dispatch() can
-be used.  Implement a plat_irq_dispatch() which simply handles all the
-pending interrupts as reported by C0_Cause.
-
-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
-Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
-Tested-by: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Thomas Gleixner <tglx@linutronix.de>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Andrew Bresticker <abrestic@chromium.org>
-Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: Paul Burton <paul.burton@imgtec.com>
-Cc: Qais Yousef <qais.yousef@imgtec.com>
-Cc: Jonas Gorski <jogo@openwrt.org>
-Cc: John Crispin <blogic@openwrt.org>
-Cc: David Daney <ddaney.cavm@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
-Patchwork: https://patchwork.linux-mips.org/patch/7801/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/kernel/irq_cpu.c |   18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/kernel/irq_cpu.c
-+++ b/arch/mips/kernel/irq_cpu.c
-@@ -98,6 +98,24 @@ static struct irq_chip mips_mt_cpu_irq_c
- 	.irq_enable	= unmask_mips_irq,
- };
- 
-+asmlinkage void __weak plat_irq_dispatch(void)
-+{
-+	unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
-+	int irq;
-+
-+	if (!pending) {
-+		spurious_interrupt();
-+		return;
-+	}
-+
-+	pending >>= CAUSEB_IP;
-+	while (pending) {
-+		irq = fls(pending) - 1;
-+		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-+		pending &= ~BIT(irq);
-+	}
-+}
-+
- static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
- 			     irq_hw_number_t hw)
- {
diff --git a/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644
index 63d385be4e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+	else
-+		return;
-+
-+	if (enable)
-+		msleep(100);
- }
- 
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644
index 031dab43e8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+	else
-+		return;
-+
-+	if (enable)
-+		udelay(10);
- }
- 
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -391,7 +391,6 @@ static inline void set_clocks(struct bcm
- 	if (is_enabled) {
- 		clk_enable(udc->usbh_clk);
- 		clk_enable(udc->usbd_clk);
--		udelay(10);
- 	} else {
- 		clk_disable(udc->usbd_clk);
- 		clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-sync-mips-counter-during-cpu-bringup.patch b/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-sync-mips-counter-during-cpu-bringup.patch
deleted file mode 100644
index f303c6173b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-sync-mips-counter-during-cpu-bringup.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 23c21090f49a64b532755542a71e9aa3e4fc84d9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 5 Apr 2014 20:07:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: sync mips counter during cpu bringup
-
-We are using the mips counters as the clock source, so we need to ensure
-they are synced, else e.g. gettimeofday will return different values
-depending on which core it was run.
-
-Observed difference was about 8 seconds, causing ~8 seconds ping or time
-running backwards for some programs.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -132,6 +132,7 @@ config BCM63XX
- 	select BOOT_RAW
- 	select CEVT_R4K
- 	select CSRC_R4K
-+	select SYNC_R4K
- 	select DMA_NONCOHERENT
- 	select IRQ_CPU
- 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644
index f98ae5b829..0000000000
--- a/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--		   dev-wdt.o dev-usb-usbd.o
-+		   dev-wdt.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+	u32 val;
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+	if (is_device) {
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	} else {
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	}
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+	if (is_device)
-+		val |= USBH_PRIV_SWAP_USBD_MASK;
-+	else
-+		val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+	u32 val;
-+
-+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+	if (is_on)
-+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	else
-+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -40,6 +40,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- 
- #define DRV_MODULE_NAME		"bcm63xx_udc"
- 
-@@ -868,22 +869,7 @@ static void bcm63xx_select_phy_mode(stru
- 		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
- 	}
- 
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--	if (is_device) {
--		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	} else {
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	}
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--	if (is_device)
--		val |= USBH_PRIV_SWAP_USBD_MASK;
--	else
--		val &= ~USBH_PRIV_SWAP_USBD_MASK;
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+	bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- 
- /**
-@@ -897,14 +883,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--	u32 val, portmask = BIT(udc->pd->port_no);
-+	u32 portmask = BIT(udc->pd->port_no);
- 
--	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--	if (is_on)
--		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	else
--		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+	bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- 
- /**
diff --git a/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644
index 40bbe083a7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- 
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
- 
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
- 	u32 val;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
- 
- 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
- 	if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
- 	else
- 		val &= ~USBH_PRIV_SWAP_USBD_MASK;
- 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- 
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
- 	u32 val;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
- 
- 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
- 	if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
- 	else
- 		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
- 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA	ENDN	mmio	descriptor
-+ * 0	0	BE	invalid
-+ * 0	1	BE	LE
-+ * 1	0	BE	BE
-+ * 1	1	BE	invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+	u32 reg;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+	if (BCMCPU_IS_6348())
-+		bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+	else if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+				USBH_PRIV_TEST_6358_REG);
-+
-+	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	}
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+	u32 reg;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+	if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+				USBH_PRIV_TEST_6358_REG);
-+
-+	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	}
-+
-+	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- 
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- 
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644
index 768dccac5e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 
-+config BCM63XX_OHCI
-+	bool
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
- 	bool "support 6348 CPU"
- 	select SYS_HAS_CPU_BMIPS32_3300
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644
index 111d481e54..0000000000
--- a/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--		   dev-wdt.o dev-usb-usbd.o usb-common.o
-+		   dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+	usb_host_clock = clk_get(&pdev->dev, "usbh");
-+	if (IS_ERR_OR_NULL(usb_host_clock))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(usb_host_clock);
-+
-+	bcm63xx_usb_priv_ohci_cfg_set();
-+
-+	return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+	if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+		clk_disable_unprepare(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+	.big_endian_desc	= 1,
-+	.big_endian_mmio	= 1,
-+	.no_big_frame_no	= 1,
-+	.num_ports		= 1,
-+	.power_on		= bcm63xx_ohci_power_on,
-+	.power_off		= bcm63xx_ohci_power_off,
-+	.power_suspend		= bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+	.name		= "ohci-platform",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(ohci_resources),
-+	.resource	= ohci_resources,
-+	.dev		= {
-+		.platform_data		= &bcm63xx_ohci_pdata,
-+		.dma_mask		= &ohci_dmamask,
-+		.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	},
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+		return -ENODEV;
-+
-+	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+	ohci_resources[0].end = ohci_resources[0].start;
-+	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+	ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+	return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644
index 2c264829fb..0000000000
--- a/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-@@ -898,6 +899,9 @@ int __init board_register_devices(void)
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644
index bce91e3736..0000000000
--- a/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -12,11 +12,18 @@ config BCM63XX_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
- 	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
- 
-+config BCM63XX_EHCI
-+	bool
-+	select USB_ARCH_HAS_EHCI
-+	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6338
- 	bool "support 6338 CPU"
-@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6362
- 	bool "support 6362 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6368
- 	bool "support 6368 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
- 	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644
index 8b1f8d22b8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--		   dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
-+		   usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+	usb_host_clock = clk_get(&pdev->dev, "usbh");
-+	if (IS_ERR_OR_NULL(usb_host_clock))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(usb_host_clock);
-+
-+	bcm63xx_usb_priv_ehci_cfg_set();
-+
-+	return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+	if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+		clk_disable_unprepare(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+	.big_endian_desc	= 1,
-+	.big_endian_mmio	= 1,
-+	.power_on		= bcm63xx_ehci_power_on,
-+	.power_off		= bcm63xx_ehci_power_off,
-+	.power_suspend		= bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+	.name		= "ehci-platform",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(ehci_resources),
-+	.resource	= ehci_resources,
-+	.dev		= {
-+		.platform_data		= &bcm63xx_ehci_pdata,
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= DMA_BIT_MASK(32),
-+	},
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+		return 0;
-+
-+	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+	ehci_resources[0].end = ehci_resources[0].start;
-+	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+	ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+	return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644
index 641a57c4c0..0000000000
--- a/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -899,6 +900,9 @@ int __init board_register_devices(void)
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
- 	if (board.has_ohci0)
- 		bcm63xx_ohci_register();
- 
diff --git a/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644
index 6d91129932..0000000000
--- a/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
- 	.big_endian_desc	= 1,
- 	.big_endian_mmio	= 1,
-+	.ignore_oc		= 1,
- 	.power_on		= bcm63xx_ehci_power_on,
- 	.power_off		= bcm63xx_ehci_power_off,
- 	.power_suspend		= bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
deleted file mode 100644
index 00dc9c90ee..0000000000
--- a/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 1 Jul 2011 23:16:47 +0200
-Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- include/linux/spi/flash.h |    5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -2,7 +2,7 @@
- #define LINUX_SPI_FLASH_H
- 
- struct mtd_partition;
--
-+struct mtd_part_parser_data;
- /**
-  * struct flash_platform_data: board-specific flash data
-  * @name: optional flash device name (eg, as used with mtdparts=)
-@@ -10,6 +10,8 @@ struct mtd_partition;
-  * @nr_parts: number of mtd_partitions for static partitoning
-  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
-  *	with chips that can't be queried for JEDEC or other IDs
-+ * @part_probe_types: optional list of MTD parser names to use for
-+ *	partitioning
-  *
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-@@ -25,6 +27,7 @@ struct flash_platform_data {
- 
- 	char		*type;
- 
-+	const char	**part_probe_types;
- 	/* we'll likely add more ... use JEDEC IDs, etc */
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
deleted file mode 100644
index 7414a3b0c8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 16:53:08 +0100
-Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
- platform data
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1314,7 +1314,8 @@ static int m25p_probe(struct spi_device
- 	/* partitions should match sector boundaries; and it may be good to
- 	 * use readonly partitions for writeprotected sectors (BP2..BP0).
- 	 */
--	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+	return mtd_device_parse_register(&flash->mtd,
-+			data ? data->part_probe_types : NULL, &ppdata,
- 			data ? data->parts : NULL,
- 			data ? data->nr_parts : 0);
- }
diff --git a/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644
index e5676dc79c..0000000000
--- a/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h    |    4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -115,6 +115,7 @@ struct m25p {
- 	u8			program_opcode;
- 	u8			*command;
- 	enum read_type		flash_read;
-+	int			max_transfer_len;
- };
- 
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -509,10 +510,9 @@ static inline unsigned int m25p80_rx_nbi
-  * Read an address range from the flash chip.  The address range
-  * may be any size provided it is within the physical boundaries.
-  */
--static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
- 	size_t *retlen, u_char *buf)
- {
--	struct m25p *flash = mtd_to_m25p(mtd);
- 	struct spi_transfer t[2];
- 	struct spi_message m;
- 	uint8_t opcode;
-@@ -562,6 +562,28 @@ static int m25p80_read(struct mtd_info *
- 	return 0;
- }
- 
-+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+	size_t *retlen, u_char *buf)
-+{
-+	struct m25p *flash = mtd_to_m25p(mtd);
-+	size_t off;
-+	size_t read_len = flash->max_transfer_len;
-+	size_t part_len;
-+	int ret = 0;
-+
-+	if (!read_len)
-+		return __m25p80_read(flash, from, len, retlen, buf);
-+
-+	*retlen = 0;
-+
-+	for (off = 0; off < len && !ret; off += read_len) {
-+		ret = __m25p80_read(flash, from + off, min(len - off, read_len),
-+				    &part_len, buf + off);
-+			*retlen += part_len;
-+	}
-+
-+	return ret;
-+}
- /*
-  * Write an address range to the flash chip.  Data must be written in
-  * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -1159,6 +1181,9 @@ static int m25p_probe(struct spi_device
- 	if (!flash->command)
- 		return -ENOMEM;
- 
-+	if (data)
-+		flash->max_transfer_len = data->max_transfer_len;
-+
- 	flash->spi = spi;
- 	mutex_init(&flash->lock);
- 	spi_set_drvdata(spi, flash);
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
-  * @part_probe_types: optional list of MTD parser names to use for
-  *	partitioning
-  *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ *	SPI controllers not able to transfer any length commands.
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-  * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
- 	char		*type;
- 
- 	const char	**part_probe_types;
-+
-+	unsigned int	max_transfer_len;
- 	/* we'll likely add more ... use JEDEC IDs, etc */
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch b/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
deleted file mode 100644
index 6e9e6df55e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From b2f399dcd674a692a64bb3b300b77b78ae57b530 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 12 Jan 2014 16:47:35 +0100
-Subject: [PATCH] USB: OHCI: allow other arches to use the BE frame number
- quirk
-
-Intead of guarding it with a certain PPC SoC and expanding the list
-for each SoC requiring it, just guard it with USB_OHCI_BIG_ENDIAN_DESC.
-
-This makes it less suprising that passing no_big_frame_no = 1 for the
-platform data does not do what expected (or
-
-Checking it for all big endian descriptor setups should not impact
-performance much as USB1.1 is rather slow anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ohci.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -641,7 +641,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
- 
--#ifdef CONFIG_PPC_MPC52xx
-+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
- #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)	0
diff --git a/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644
index 474171ffb2..0000000000
--- a/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -660,6 +660,10 @@ int ehci_setup(struct usb_hcd *hcd)
- 
- 	/* cache this readonly data; minimize chip reads */
- 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+	if (ehci->num_ports) {
-+		ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+		ehci->hcs_params |= ehci->num_ports;
-+	}
- 
- 	ehci->sbrn = HCD_USB2;
- 
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -48,6 +48,8 @@ static int ehci_platform_reset(struct us
- 	ehci->big_endian_desc = pdata->big_endian_desc;
- 	ehci->big_endian_mmio = pdata->big_endian_mmio;
- 	ehci->ignore_oc = pdata->ignore_oc;
-+	if (pdata->num_ports && pdata->num_ports <= 15)
-+		ehci->num_ports = pdata->num_ports;
- 
- 	if (pdata->pre_setup) {
- 		retval = pdata->pre_setup(hcd);
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -213,6 +213,7 @@ struct ehci_hcd {			/* one per controlle
- 	u32			command;
- 
- 	/* SILICON QUIRKS */
-+	unsigned int		num_ports;
- 	unsigned		no_selective_suspend:1;
- 	unsigned		has_fsl_port_bug:1; /* FreeScale */
- 	unsigned		big_endian_mmio:1;
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -40,6 +40,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
- 	int		caps_offset;
-+	unsigned int	num_ports;
- 	unsigned	has_tt:1;
- 	unsigned	has_synopsys_hc_bug:1;
- 	unsigned	big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-3.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/brcm63xx/patches-3.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644
index 4e5e6117b1..0000000000
--- a/target/linux/brcm63xx/patches-3.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
+++ /dev/null
@@ -1,493 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
-+obj-y					+= board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -10,35 +10,22 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_dsp.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- 
- #define PFX	"board_bcm963xx: "
- 
- #define HCS_OFFSET_128K			0x20000
- 
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -711,52 +698,6 @@ static const struct board_info __initcon
- };
- 
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--	.revision		= 0x02,
--	.board_rev		= 0x17,
--	.country_code		= 0x0,
--	.ant_available_bg	= 0x3,
--	.pa0b0			= 0x15ae,
--	.pa0b1			= 0xfa85,
--	.pa0b2			= 0xfe8d,
--	.pa1b0			= 0xffff,
--	.pa1b1			= 0xffff,
--	.pa1b2			= 0xffff,
--	.gpio0			= 0xff,
--	.gpio1			= 0xff,
--	.gpio2			= 0xff,
--	.gpio3			= 0xff,
--	.maxpwr_bg		= 0x004c,
--	.itssi_bg		= 0x00,
--	.boardflags_lo		= 0x2848,
--	.boardflags_hi		= 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--		return 0;
--	} else {
--		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--		return -EINVAL;
--	}
--}
--#endif
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--	return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -801,141 +742,16 @@ void __init board_prom_init(void)
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
- 			continue;
- 		/* copy, board desc array is marked initdata */
--		memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+		board_early_setup(bcm963xx_boards[i]);
- 		break;
- 	}
- 
--	/* bail out if board is not found, will complain later */
--	if (!board.name[0]) {
-+	/* warn if board is not found, will complain later */
-+	if (i == ARRAY_SIZE(bcm963xx_boards)) {
- 		char name[17];
- 		memcpy(name, board_name, 16);
- 		name[16] = 0;
- 		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
- 		       name);
--		return;
--	}
--
--	/* setup pin multiplexing depending on board enabled device,
--	 * this has to be done this early since PCI init is done
--	 * inside arch_initcall */
--	val = 0;
--
--#ifdef CONFIG_PCI
--	if (board.has_pci) {
--		bcm63xx_pci_enabled = 1;
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G2_PCI;
--	}
--#endif
--
--	if (board.has_pccard) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G1_MII_PCCARD;
--	}
--
--	if (board.has_enet0 && !board.enet0.use_internal_phy) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G3_EXT_MII |
--				GPIO_MODE_6348_G0_EXT_MII;
--	}
--
--	if (board.has_enet1 && !board.enet1.use_internal_phy) {
--		if (BCMCPU_IS_6348())
--			val |= GPIO_MODE_6348_G3_EXT_MII |
--				GPIO_MODE_6348_G0_EXT_MII;
--	}
--
--	bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--	if (!board.name[0])
--		panic("unable to detect bcm963xx board");
--	printk(KERN_INFO PFX "board name: %s\n", board.name);
--
--	/* make sure we're running on expected cpu */
--	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--		panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--	.name			= "leds-gpio",
--	.id			= 0,
--	.dev.platform_data	= &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--	if (board.has_uart0)
--		bcm63xx_uart_register(0);
--
--	if (board.has_uart1)
--		bcm63xx_uart_register(1);
--
--	if (board.has_pccard)
--		bcm63xx_pcmcia_register();
--
--	if (board.has_enet0 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--		bcm63xx_enet_register(0, &board.enet0);
--
--	if (board.has_enet1 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--		bcm63xx_enet_register(1, &board.enet1);
--
--	if (board.has_enetsw &&
--	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--		bcm63xx_enetsw_register(&board.enetsw);
--
--	if (board.has_usbd)
--		bcm63xx_usbd_register(&board.usbd);
--
--	if (board.has_ehci0)
--		bcm63xx_ehci_register();
--
--	if (board.has_ohci0)
--		bcm63xx_ohci_register();
--
--	if (board.has_dsp)
--		bcm63xx_dsp_register(&board.dsp);
--
--	/* Generate MAC address for WLAN and register our SPROM,
--	 * do this after registering enet devices
--	 */
--#ifdef CONFIG_SSB_PCIHOST
--	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		if (ssb_arch_register_fallback_sprom(
--				&bcm63xx_get_fallback_sprom) < 0)
--			pr_err(PFX "failed to register fallback SPROM\n");
- 	}
--#endif
--
--	bcm63xx_spi_register();
--
--	bcm63xx_hsspi_register();
--
--	bcm63xx_flash_register();
--
--	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--	bcm63xx_led_data.leds = board.leds;
--
--	platform_device_register(&bcm63xx_gpio_leds);
--
--	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--		gpio_request_one(board.ephy_reset_gpio,
--				board.ephy_reset_gpio_flags, "ephy-reset");
--
--	return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,217 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+	.revision		= 0x02,
-+	.board_rev		= 0x17,
-+	.country_code		= 0x0,
-+	.ant_available_bg	= 0x3,
-+	.pa0b0			= 0x15ae,
-+	.pa0b1			= 0xfa85,
-+	.pa0b2			= 0xfe8d,
-+	.pa1b0			= 0xffff,
-+	.pa1b1			= 0xffff,
-+	.pa1b2			= 0xffff,
-+	.gpio0			= 0xff,
-+	.gpio1			= 0xff,
-+	.gpio2			= 0xff,
-+	.gpio3			= 0xff,
-+	.maxpwr_bg		= 0x004c,
-+	.itssi_bg		= 0x00,
-+	.boardflags_lo		= 0x2848,
-+	.boardflags_hi		= 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->bustype == SSB_BUSTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+	u32 val;
-+
-+	memcpy(&board, target, sizeof(board));
-+
-+	/* setup pin multiplexing depending on board enabled device,
-+	 * this has to be done this early since PCI init is done
-+	 * inside arch_initcall */
-+	val = 0;
-+
-+#ifdef CONFIG_PCI
-+	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G2_PCI;
-+	}
-+#endif
-+
-+	if (board.has_pccard) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+	}
-+
-+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+	if (!board.name[0])
-+		panic("unable to detect bcm963xx board");
-+	printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+	/* make sure we're running on expected cpu */
-+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+		panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+	.name			= "leds-gpio",
-+	.id			= 0,
-+	.dev.platform_data	= &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+	if (board.has_uart0)
-+		bcm63xx_uart_register(0);
-+
-+	if (board.has_uart1)
-+		bcm63xx_uart_register(1);
-+
-+	if (board.has_pccard)
-+		bcm63xx_pcmcia_register();
-+
-+	if (board.has_enet0 &&
-+	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+		bcm63xx_enet_register(0, &board.enet0);
-+
-+	if (board.has_enet1 &&
-+	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+		bcm63xx_enet_register(1, &board.enet1);
-+
-+	if (board.has_enetsw &&
-+	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+		bcm63xx_enetsw_register(&board.enetsw);
-+
-+	if (board.has_usbd)
-+		bcm63xx_usbd_register(&board.usbd);
-+
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
-+	if (board.has_dsp)
-+		bcm63xx_dsp_register(&board.dsp);
-+
-+	/* Generate MAC address for WLAN and register our SPROM,
-+	 * do this after registering enet devices
-+	 */
-+#ifdef CONFIG_SSB_PCIHOST
-+	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+		if (ssb_arch_register_fallback_sprom(
-+				&bcm63xx_get_fallback_sprom) < 0)
-+			pr_err(PFX "failed to register fallback SPROM\n");
-+	}
-+#endif
-+
-+	bcm63xx_spi_register();
-+
-+	bcm63xx_hsspi_register();
-+
-+	bcm63xx_flash_register();
-+
-+	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+	bcm63xx_led_data.leds = board.leds;
-+
-+	platform_device_register(&bcm63xx_gpio_leds);
-+
-+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+		gpio_request_one(board.ephy_reset_gpio,
-+				board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-3.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/brcm63xx/patches-3.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644
index 877030f866..0000000000
--- a/target/linux/brcm63xx/patches-3.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -742,7 +742,8 @@ void __init board_prom_init(void)
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
- 			continue;
- 		/* copy, board desc array is marked initdata */
--		board_early_setup(bcm963xx_boards[i]);
-+		board_early_setup(bcm963xx_boards[i],
-+				  bcm63xx_nvram_get_mac_address);
- 		break;
- 	}
- 
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
- 	return board.name;
- }
- 
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+			      int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
- 	u32 val;
- 
- 	memcpy(&board, target, sizeof(board));
- 
-+	board_get_mac_address = get_mac_address;
-+
- 	/* setup pin multiplexing depending on board enabled device,
- 	 * this has to be done this early since PCI init is done
- 	 * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
- 		bcm63xx_pcmcia_register();
- 
- 	if (board.has_enet0 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+	    !board_get_mac_address(board.enet0.mac_addr))
- 		bcm63xx_enet_register(0, &board.enet0);
- 
- 	if (board.has_enet1 &&
--	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
- 	if (board.has_enetsw &&
--	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+	    !board_get_mac_address(board.enetsw.mac_addr))
- 		bcm63xx_enetsw_register(&board.enetsw);
- 
- 	if (board.has_usbd)
-@@ -189,7 +193,7 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- #ifdef CONFIG_SSB_PCIHOST
--	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- 		if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- 
- #include <board_bcm963xx.h>
- 
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
deleted file mode 100644
index 2263b499ad..0000000000
--- a/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -10,6 +10,8 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -26,6 +28,9 @@
- 
- #define HCS_OFFSET_128K			0x20000
- 
-+#define BCM963XX_KEYS_POLL_INTERVAL	20
-+#define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
-+
- /*
-  * known 3368 boards
-  */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -32,6 +33,8 @@
- 
- #define PFX	"board: "
- 
-+#define BCM963XX_KEYS_POLL_INTERVAL	20
-+
- static struct board_info board;
- 
- /*
-@@ -151,11 +154,23 @@ static struct platform_device bcm63xx_gp
- 	.dev.platform_data	= &bcm63xx_led_data,
- };
- 
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+	.poll_interval  = BCM963XX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+	.name		= "gpio-keys-polled",
-+	.id		= 0,
-+	.dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
-+	int button_count = 0;
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
-@@ -217,5 +232,16 @@ int __init board_register_devices(void)
- 		gpio_request_one(board.ephy_reset_gpio,
- 				board.ephy_reset_gpio_flags, "ephy-reset");
- 
-+	/* count number of BUTTONs defined by this device */
-+	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+		button_count++;
-+
-+	if (button_count) {
-+		bcm63xx_gpio_keys_data.nbuttons = button_count;
-+		bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+		platform_device_register(&bcm63xx_gpio_keys_device);
-+	}
-+
- 	return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -3,6 +3,7 @@
- 
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -48,6 +49,9 @@ struct board_info {
- 	/* GPIO LEDs */
- 	struct gpio_led leds[5];
- 
-+	/* Buttons */
-+	struct gpio_keys_button buttons[4];
-+
- 	/* External PHY reset GPIO */
- 	unsigned int ephy_reset_gpio;
- 
diff --git a/target/linux/brcm63xx/patches-3.14/301-led_count.patch b/target/linux/brcm63xx/patches-3.14/301-led_count.patch
deleted file mode 100644
index 49a18255d2..0000000000
--- a/target/linux/brcm63xx/patches-3.14/301-led_count.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -170,6 +170,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
- 	int button_count = 0;
-+	int led_count = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -223,10 +224,16 @@ int __init board_register_devices(void)
- 
- 	bcm63xx_flash_register();
- 
--	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--	bcm63xx_led_data.leds = board.leds;
-+	/* count number of LEDs defined by this device */
-+	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+		led_count++;
-+
-+	if (led_count) {
-+		bcm63xx_led_data.num_leds = led_count;
-+		bcm63xx_led_data.leds = board.leds;
- 
--	platform_device_register(&bcm63xx_gpio_leds);
-+		platform_device_register(&bcm63xx_gpio_leds);
-+	}
- 
- 	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
- 		gpio_request_one(board.ephy_reset_gpio,
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -47,7 +47,7 @@ struct board_info {
- 	struct bcm63xx_dsp_platform_data dsp;
- 
- 	/* GPIO LEDs */
--	struct gpio_led leds[5];
-+	struct gpio_led leds[14];
- 
- 	/* Buttons */
- 	struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
deleted file mode 100644
index cc61cee477..0000000000
--- a/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -222,6 +222,9 @@ int __init board_register_devices(void)
- 
- 	bcm63xx_hsspi_register();
- 
-+	if (board.num_devs)
-+		platform_add_devices(board.devs, board.num_devs);
-+
- 	bcm63xx_flash_register();
- 
- 	/* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,10 @@ struct board_info {
- 
- 	/* External PHY reset GPIO flags from gpio.h */
- 	unsigned long ephy_reset_gpio_flags;
-+
-+	/* Additional platform devices */
-+	struct platform_device **devs;
-+	unsigned int	num_devs;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
deleted file mode 100644
index 878e6262d4..0000000000
--- a/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -13,6 +13,7 @@
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -225,6 +226,9 @@ int __init board_register_devices(void)
- 	if (board.num_devs)
- 		platform_add_devices(board.devs, board.num_devs);
- 
-+	if (board.num_spis)
-+		spi_register_board_info(board.spis, board.num_spis);
-+
- 	bcm63xx_flash_register();
- 
- 	/* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
- 	/* Additional platform devices */
- 	struct platform_device **devs;
- 	unsigned int	num_devs;
-+
-+	/* Additional platform devices */
-+	struct spi_board_info *spis;
-+	unsigned int	num_spis;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
deleted file mode 100644
index 42af6aec4e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -727,10 +727,20 @@ void __init board_prom_init(void)
- 
- 	/* dump cfe version */
- 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--	if (!memcmp(cfe, "cfe-v", 5))
--		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--	else
-+	if (strstarts(cfe, "cfe-")) {
-+		if(cfe[4] == 'v') {
-+			if(cfe[5] == 'd')
-+				snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+			else if (cfe[10] > 0)
-+				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+			else
-+				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+		} else {
-+			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+		}
-+	} else
- 		strcpy(cfe_version, "unknown");
- 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/310-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-3.14/310-cfe_simplify_detection.patch
deleted file mode 100644
index e05c91d931..0000000000
--- a/target/linux/brcm63xx/patches-3.14/310-cfe_simplify_detection.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -1,6 +1,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
- 
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- 
- void board_prom_init(void);
-@@ -9,4 +11,8 @@ void board_setup(void);
- 
- int board_register_devices(void);
- 
-+static inline bool bcm63xx_is_cfe_present(void) {
-+	return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/311-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-3.14/311-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644
index 46d9b47cdf..0000000000
--- a/target/linux/brcm63xx/patches-3.14/311-bcm63xxpart_use_cfedetection.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,7 +35,7 @@
- 
- #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <asm/mach-bcm63xx/bcm963xx_tag.h>
--#include <asm/mach-bcm63xx/board_bcm963xx.h>
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- 
- #define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
- 
-@@ -43,30 +43,6 @@
- 
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
- 
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--	char buf[9];
--	int ret;
--	size_t retlen;
--
--	ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--		       (void *)buf);
--	buf[retlen] = 0;
--
--	if (ret)
--		return ret;
--
--	if (strncmp("cfe-v", buf, 5) == 0)
--		return 0;
--
--	/* very old CFE's do not have the cfe-v string, so check for magic */
--	ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
--		       (void *)buf);
--	buf[retlen] = 0;
--
--	return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
- 					struct mtd_partition **pparts,
- 					struct mtd_part_parser_data *data)
-@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
- 	u32 computed_crc;
- 	bool rootfs_first = false;
- 
--	if (bcm63xx_detect_cfe(master))
-+	if (!bcm63xx_is_cfe_present())
- 		return -EINVAL;
- 
- 	cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644
index 8219c98a4b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
+++ /dev/null
@@ -1,457 +0,0 @@
-From 7aaa70416d87434792b73077beb328202975e541 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  325 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 396 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+	compatible = "brcm,bcm6345-periph-intc";
-+	reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+	interrupt-controller;
-+	#interrupt-cells = <1>;
-+
-+	interrupt-parent = <&cpu_intc>;
-+	interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -30,6 +30,10 @@ config ARM_VIC_NR
- 	  The maximum number of VICs available in the system, for
- 	  power management.
- 
-+config BCM6345_PERIPH_IRQ
-+	bool
-+	select IRQ_DOMAIN
-+
- config DW_APB_ICTL
- 	bool
- 	select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
- obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
- obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
- obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)	+= irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)			+= irq-metag-ext.o
- obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,341 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE	IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE	0
-+#endif
-+
-+#include "irqchip.h"
-+
-+#define MAX_WORDS	4
-+#define MAX_PARENT_IRQS	2
-+#define IRQS_PER_WORD	32
-+
-+struct intc_block {
-+	int parent_irq;
-+	void __iomem *base;
-+	void __iomem *en_reg[MAX_WORDS];
-+	void __iomem *status_reg[MAX_WORDS];
-+	u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+	struct irq_chip chip;
-+	struct intc_block block[MAX_PARENT_IRQS];
-+
-+	int num_words;
-+
-+	struct irq_domain *domain;
-+	raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(unsigned int irq, struct irq_desc *desc)
-+{
-+	struct intc_data *data = irq_desc_get_handler_data(desc);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	struct intc_block *block;
-+	unsigned int idx;
-+
-+	chained_irq_enter(chip, desc);
-+
-+	for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+		if (irq == data->block[idx].parent_irq)
-+			block = &data->block[idx];
-+
-+	for (idx = 0; idx < data->num_words; idx++) {
-+		int base = idx * IRQS_PER_WORD;
-+		unsigned long pending;
-+		int hw_irq;
-+
-+		raw_spin_lock(&data->lock);
-+		pending = __raw_readl(block->en_reg[idx]) &
-+			  __raw_readl(block->status_reg[idx]);
-+		raw_spin_unlock(&data->lock);
-+
-+		for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+			int virq;
-+
-+			virq  = irq_find_mapping(data->domain, base + hw_irq);
-+			generic_handle_irq(virq);
-+		}
-+	}
-+
-+	chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+				    bool enable)
-+{
-+	u32 val;
-+
-+	val = __raw_readl(block->en_reg[reg]);
-+	if (enable)
-+		val |= BIT(bit);
-+	else
-+		val &= ~BIT(bit);
-+	__raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+	unsigned int i, reg, bit;
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	raw_spin_lock(&priv->lock);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		__bcm6345_periph_enable(block, reg, bit, false);
-+	}
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	unsigned int i, reg, bit;
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	raw_spin_lock(&priv->lock);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		if (block->mask_cache[reg] & BIT(bit))
-+			__bcm6345_periph_enable(block, reg, bit, true);
-+		else
-+			__bcm6345_periph_enable(block, reg, bit, false);
-+
-+	}
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+				       const struct cpumask *mask, bool force)
-+{
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	struct intc_data *priv = data->domain->host_data;
-+	unsigned int i, reg, bit;
-+	unsigned long flags;
-+	bool enabled;
-+	int cpu;
-+
-+	reg = hwirq / IRQS_PER_WORD;
-+	bit = hwirq % IRQS_PER_WORD;
-+
-+	/* we could route to more than one cpu, but performance
-+	   suffers, so fix it to one.
-+	 */
-+	cpu = cpumask_any_and(mask, cpu_online_mask);
-+	if (cpu >= nr_cpu_ids)
-+		return -EINVAL;
-+
-+	if (cpu >= MAX_PARENT_IRQS)
-+		return -EINVAL;
-+
-+	if (!priv->block[cpu].parent_irq)
-+		return -EINVAL;
-+
-+	raw_spin_lock_irqsave(&priv->lock, flags);
-+	enabled = !irqd_irq_masked(data);
-+	for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+		struct intc_block *block = &priv->block[i];
-+
-+		if (!block->parent_irq)
-+			break;
-+
-+		if (i == cpu) {
-+			block->mask_cache[reg] |= BIT(bit);
-+			__bcm6345_periph_enable(block, reg, bit, enabled);
-+		} else {
-+			block->mask_cache[reg] &= ~BIT(bit);
-+			__bcm6345_periph_enable(block, reg, bit, false);
-+		}
-+	}
-+	raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+			      irq_hw_number_t hw)
-+{
-+	struct intc_data *priv = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+	.xlate = irq_domain_xlate_onecell,
-+	.map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+					     int num_blocks, int *irq,
-+					     void __iomem **base, int num_words)
-+{
-+	struct intc_data *data;
-+	unsigned int i, w, status_offset;
-+
-+	data = kzalloc(sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	raw_spin_lock_init(&data->lock);
-+
-+	status_offset = num_words * sizeof(u32);
-+
-+	for (i = 0; i < num_blocks; i++) {
-+		struct intc_block *block = &data->block[i];
-+
-+		block->parent_irq = irq[i];
-+		block->base = base[i];
-+
-+		for (w = 0; w < num_words; w++) {
-+			int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+			block->en_reg[w] = base[i] + word_offset;
-+			block->status_reg[w] = base[i] + status_offset;
-+			block->status_reg[w] += word_offset;
-+
-+			/* route all interrups to line 0 by default */
-+			if (i == 0)
-+				block->mask_cache[w] = 0xffffffff;
-+		}
-+
-+		irq_set_handler_data(block->parent_irq, data);
-+		irq_set_chained_handler(block->parent_irq,
-+					bcm6345_periph_irq_handle);
-+	}
-+
-+	data->num_words = num_words;
-+
-+	data->chip.name = "bcm6345-periph-intc";
-+	data->chip.irq_mask = bcm6345_periph_irq_mask;
-+	data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+	if (num_blocks > 1)
-+		data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+	data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+					     VIRQ_BASE,
-+					     &bcm6345_periph_domain_ops, data);
-+	if (!data->domain) {
-+		kfree(data);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+				     void __iomem **base, int num_words)
-+{
-+	__bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+					 struct device_node *parent)
-+{
-+	struct resource res;
-+	int num_irqs, ret = -EINVAL;
-+	int irqs[MAX_PARENT_IRQS] = { 0 };
-+	void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+	int words = 0;
-+	int i;
-+
-+	num_irqs = of_irq_count(node);
-+
-+	if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+		return -EINVAL;
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		resource_size_t size;
-+
-+		irqs[i] = irq_of_parse_and_map(node, i);
-+		if (!irqs[i])
-+			goto out_unmap;
-+
-+		if (of_address_to_resource(node, i, &res)) {
-+			goto out_unmap;
-+		}
-+
-+		size = resource_size(&res);
-+		switch (size) {
-+			case 8:
-+			case 16:
-+			case 32:
-+				size = size / 8;
-+				break;
-+			default:
-+				goto out_unmap;
-+		}
-+
-+		if (words && words != size) {
-+			ret = -EINVAL;
-+			goto out_unmap;
-+		}
-+		words = size;
-+
-+		bases[i] = of_iomap(node, i);
-+		if (!bases[i]) {
-+			ret = -ENOMEM;
-+			goto out_unmap;
-+		}
-+	}
-+
-+	ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+	if (!ret)
-+		return 0;
-+
-+out_unmap:
-+	for (i = 0; i < num_irqs; i++) {
-+		iounmap(bases[i]);
-+		irq_dispose_mapping(irqs[i]);
-+	}
-+
-+	return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-periph-intc",
-+		bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+			      int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/brcm63xx/patches-3.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644
index 964d9fc60f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
+++ /dev/null
@@ -1,381 +0,0 @@
-From ac60253478d58fc73b4c0a390eb6229222460e8a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  286 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 334 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-l2-intc".
-+- reg: Specifies the base physical addresses and size of the registers. 
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+	compatible = "brcm,bcm6345-l2-intc";
-+	interrupt-parent = <&periph_intc>;
-+	#interrupt-cells = <2>;
-+	reg = <0x10000018 0x4>;
-+	interrupt-controller;
-+	interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -30,6 +30,10 @@ config ARM_VIC_NR
- 	  The maximum number of VICs available in the system, for
- 	  power management.
- 
-+config BCM6345_EXT_IRQ
-+	bool
-+	select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
- 	bool
- 	select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
- obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
- obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
- obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)		+= irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)	+= irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)			+= irq-metag-ext.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,288 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+i */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "irqchip.h"
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE		IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE		0
-+#endif
-+
-+#define MAX_IRQS		4
-+
-+#define EXTIRQ_CFG_SENSE	0
-+#define EXTIRQ_CFG_STAT		1
-+#define EXTIRQ_CFG_CLEAR	2
-+#define EXTIRQ_CFG_MASK		3
-+#define EXTIRQ_CFG_BOTHEDGE	4
-+#define EXTIRQ_CFG_LEVELSENSE	5
-+
-+struct intc_data {
-+	struct irq_chip chip;
-+	struct irq_domain *domain;
-+	raw_spinlock_t lock;
-+
-+	int parent_irq[MAX_IRQS];
-+	void __iomem *reg;
-+	int shift;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(unsigned int irq, struct irq_desc *desc)
-+{
-+	struct intc_data *data = irq_desc_get_handler_data(desc);
-+	struct irq_chip *chip = irq_desc_get_chip(desc);
-+	unsigned int idx;
-+
-+	chained_irq_enter(chip, desc);
-+
-+	for (idx = 0; idx < MAX_IRQS; idx++) {
-+		if (data->parent_irq[idx] != irq)
-+			continue;
-+
-+		generic_handle_irq(irq_find_mapping(data->domain, idx));
-+	}
-+
-+	chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	reg |= hwirq << (EXTIRQ_CFG_CLEAR * priv->shift);
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	reg &= ~(hwirq << (EXTIRQ_CFG_MASK * priv->shift));
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	u32 reg;
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+	reg |= hwirq << (EXTIRQ_CFG_MASK * priv->shift);
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+				     unsigned int flow_type)
-+{
-+	struct intc_data *priv = data->domain->host_data;
-+	irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+	bool levelsense = 0, sense = 0, bothedge = 0;
-+	u32 reg;
-+
-+	flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+	if (flow_type == IRQ_TYPE_NONE)
-+		flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+	switch (flow_type) {
-+	case IRQ_TYPE_EDGE_BOTH:
-+		bothedge = 1;
-+		break;
-+
-+	case IRQ_TYPE_EDGE_RISING:
-+		break;
-+
-+	case IRQ_TYPE_EDGE_FALLING:
-+		sense = 1;
-+		break;
-+
-+	case IRQ_TYPE_LEVEL_HIGH:
-+		levelsense = 1;
-+		sense = 1;
-+		break;
-+
-+	case IRQ_TYPE_LEVEL_LOW:
-+		levelsense = 1;
-+		break;
-+
-+	default:
-+		pr_err("bogus flow type combination given!\n");
-+		return -EINVAL;
-+	}
-+
-+	raw_spin_lock(&priv->lock);
-+	reg = __raw_readl(priv->reg);
-+
-+	if (levelsense)
-+		reg |= hwirq << (EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+	else
-+		reg &= ~(hwirq << (EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+	if (sense)
-+		reg |= hwirq << (EXTIRQ_CFG_SENSE * priv->shift);
-+	else
-+		reg &= ~(hwirq << (EXTIRQ_CFG_SENSE * priv->shift));
-+	if (bothedge)
-+		reg |= hwirq << (EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+	else
-+		reg &= ~(hwirq << (EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+	__raw_writel(reg, priv->reg);
-+	raw_spin_unlock(&priv->lock);
-+
-+	irqd_set_trigger_type(data, flow_type);
-+	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+		__irq_set_handler_locked(data->irq, handle_level_irq);
-+	else
-+		__irq_set_handler_locked(data->irq, handle_edge_irq);
-+
-+	return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+			  irq_hw_number_t hw)
-+{
-+	struct intc_data *priv = d->host_data;
-+
-+	irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+	return 0;
-+}
-+
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+	.xlate = irq_domain_xlate_twocell,
-+	.map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+					  int num_irqs, int *irqs,
-+					  void __iomem *reg, int shift)
-+{
-+	struct intc_data *data;
-+	unsigned int i;
-+	int start = VIRQ_BASE;
-+
-+	data = kzalloc(sizeof(*data), GFP_KERNEL);
-+	if (!data)
-+		return -ENOMEM;
-+
-+	raw_spin_lock_init(&data->lock);
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		data->parent_irq[i] = irqs[i];
-+
-+		irq_set_handler_data(irqs[i], data);
-+		irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+	}
-+
-+	data->reg = reg;
-+
-+	data->chip.name = "bcm6345-ext-intc";
-+	data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+	data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+	data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+	data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+	/*
-+	 * If we have less than 4 irqs, this is the second controller on
-+	 * bcm63xx. So increase the VIRQ start to not overlap with the first
-+	 * one, but only do so if we actually use a non-zero start.
-+	 *
-+	 * This can be removed when bcm63xx has no legacy users anymore.
-+	 */
-+	if (start && num_irqs < 4)
-+		start += 4;
-+
-+	data->domain = irq_domain_add_simple(node, num_irqs, start,
-+					     &bcm6345_ext_domain_ops, data);
-+	if (!data->domain) {
-+		kfree(data);
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+				  int shift)
-+{
-+	__bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+					   struct device_node *parent)
-+{
-+	int num_irqs, ret = -EINVAL;
-+	unsigned i;
-+	void __iomem *base;
-+	int irqs[MAX_IRQS] = { 0 };
-+	u32 shift;
-+
-+	num_irqs = of_irq_count(node);
-+
-+	if (!num_irqs || num_irqs > MAX_IRQS)
-+		return -EINVAL;
-+
-+	if (of_property_read_u32(node, "brcm,field-width", &shift))
-+		shift = 4;
-+
-+	for (i = 0; i < num_irqs; i++) {
-+		irqs[i] = irq_of_parse_and_map(node, i);
-+		if (!irqs[i]) {
-+			ret = -ENOMEM;
-+			goto out_unmap;
-+		}
-+	}
-+
-+	base = of_iomap(node, 0);
-+	if (!base)
-+		goto out_unmap;
-+
-+	ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift);
-+	if (!ret)
-+		return 0;
-+out_unmap:
-+	iounmap(base);
-+
-+	for (i = 0; i < num_irqs; i++)
-+		irq_dispose_mapping(irqs[i]);
-+
-+	return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+		bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644
index 7f3682c417..0000000000
--- a/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
+++ /dev/null
@@ -1,694 +0,0 @@
-From d93661c9e164ccc41820eeb4f1881e59a34a9e5c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH 19/20] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |    3 +
- arch/mips/bcm63xx/irq.c |  608 ++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 503 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -135,6 +135,9 @@ config BCM63XX
- 	select SYNC_R4K
- 	select DMA_NONCOHERENT
- 	select IRQ_CPU
-+	select BCM6345_EXT_IRQ
-+	select BCM6345_PERIPH_IRQ
-+	select IRQ_DOMAIN
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_BIG_ENDIAN
- 	select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -12,7 +12,9 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -20,544 +22,144 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
- 
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--	if (irq < 4)
--		return ext_irq_cfg_reg1;
--	return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--	if (is_ext_irq_cascaded &&
--	    intbit >= ext_irq_start && intbit <= ext_irq_end)
--		do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--	else
--		do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--				     const struct cpumask *m)
--{
--	bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--	if (m)
--		enable &= cpu_isset(cpu, *m);
--	else if (irqd_affinity_was_set(d))
--		enable &= cpu_isset(cpu, *d->affinity);
--#endif
--	return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)					\
--void __dispatch_internal_##width(int cpu)				\
--{									\
--	u32 pending[width / 32];					\
--	unsigned int src, tgt;						\
--	bool irqs_pending = false;					\
--	static unsigned int i[2];					\
--	unsigned int *next = &i[cpu];					\
--	unsigned long flags;						\
--									\
--	/* read registers in reverse order */				\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
--		u32 val;						\
--									\
--		val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--		val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--		pending[--tgt] = val;					\
--									\
--		if (val)						\
--			irqs_pending = true;				\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--									\
--	if (!irqs_pending)						\
--		return;							\
--									\
--	while (1) {							\
--		unsigned int to_call = *next;				\
--									\
--		*next = (*next + 1) & (width - 1);			\
--		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
--			handle_internal(to_call);			\
--			break;						\
--		}							\
--	}								\
--}									\
--									\
--static void __internal_irq_mask_##width(struct irq_data *d)		\
--{									\
--	u32 val;							\
--	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
--	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
--	unsigned bit = irq & 0x1f;					\
--	unsigned long flags;						\
--	int cpu;							\
--									\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for_each_present_cpu(cpu) {					\
--		if (!irq_mask_addr[cpu])				\
--			break;						\
--									\
--		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--		val &= ~(1 << bit);					\
--		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--}									\
--									\
--static void __internal_irq_unmask_##width(struct irq_data *d,		\
--					  const struct cpumask *m)	\
--{									\
--	u32 val;							\
--	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
--	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
--	unsigned bit = irq & 0x1f;					\
--	unsigned long flags;						\
--	int cpu;							\
--									\
--	spin_lock_irqsave(&ipic_lock, flags);				\
--	for_each_present_cpu(cpu) {					\
--		if (!irq_mask_addr[cpu])				\
--			break;						\
--									\
--		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--		if (enable_irq_for_cpu(cpu, d, m))			\
--			val |= (1 << bit);				\
--		else							\
--			val &= ~(1 << bit);				\
--		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--	}								\
--	spin_unlock_irqrestore(&ipic_lock, flags);			\
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--	u32 cause;
--
--	do {
--		cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--		if (!cause)
--			break;
--
--		if (cause & CAUSEF_IP7)
--			do_IRQ(7);
--		if (cause & CAUSEF_IP0)
--			do_IRQ(0);
--		if (cause & CAUSEF_IP1)
--			do_IRQ(1);
--		if (cause & CAUSEF_IP2)
--			dispatch_internal(0);
--		if (is_ext_irq_cascaded) {
--			if (cause & CAUSEF_IP3)
--				dispatch_internal(1);
--		} else {
--			if (cause & CAUSEF_IP3)
--				do_IRQ(IRQ_EXT_0);
--			if (cause & CAUSEF_IP4)
--				do_IRQ(IRQ_EXT_1);
--			if (cause & CAUSEF_IP5)
--				do_IRQ(IRQ_EXT_2);
--			if (cause & CAUSEF_IP6)
--				do_IRQ(IRQ_EXT_3);
--		}
--	} while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--	internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--	internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--	else
--		reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	if (is_ext_irq_cascaded)
--		internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--	else
--		reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	if (is_ext_irq_cascaded)
--		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--				    NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	unsigned long flags;
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--
--	if (BCMCPU_IS_6348())
--		reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--	else
--		reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--					 unsigned int flow_type)
--{
--	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--	u32 reg, regaddr;
--	int levelsense, sense, bothedge;
--	unsigned long flags;
--
--	flow_type &= IRQ_TYPE_SENSE_MASK;
--
--	if (flow_type == IRQ_TYPE_NONE)
--		flow_type = IRQ_TYPE_LEVEL_LOW;
--
--	levelsense = sense = bothedge = 0;
--	switch (flow_type) {
--	case IRQ_TYPE_EDGE_BOTH:
--		bothedge = 1;
--		break;
--
--	case IRQ_TYPE_EDGE_RISING:
--		sense = 1;
--		break;
--
--	case IRQ_TYPE_EDGE_FALLING:
--		break;
--
--	case IRQ_TYPE_LEVEL_HIGH:
--		levelsense = 1;
--		sense = 1;
--		break;
--
--	case IRQ_TYPE_LEVEL_LOW:
--		levelsense = 1;
--		break;
--
--	default:
--		printk(KERN_ERR "bogus flow type combination given !\n");
--		return -EINVAL;
--	}
--
--	regaddr = get_ext_irq_perf_reg(irq);
--	spin_lock_irqsave(&epic_lock, flags);
--	reg = bcm_perf_readl(regaddr);
--	irq %= 4;
--
--	switch (bcm63xx_get_cpu_id()) {
--	case BCM6348_CPU_ID:
--		if (levelsense)
--			reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--		if (sense)
--			reg |= EXTIRQ_CFG_SENSE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--		if (bothedge)
--			reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--		else
--			reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--		break;
--
--	case BCM3368_CPU_ID:
--	case BCM6328_CPU_ID:
--	case BCM6338_CPU_ID:
--	case BCM6345_CPU_ID:
--	case BCM6358_CPU_ID:
--	case BCM6362_CPU_ID:
--	case BCM6368_CPU_ID:
--		if (levelsense)
--			reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--		if (sense)
--			reg |= EXTIRQ_CFG_SENSE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_SENSE(irq);
--		if (bothedge)
--			reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--		else
--			reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--		break;
--	default:
--		BUG();
--	}
--
--	bcm_perf_writel(reg, regaddr);
--	spin_unlock_irqrestore(&epic_lock, flags);
--
--	irqd_set_trigger_type(d, flow_type);
--	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--		__irq_set_handler_locked(d->irq, handle_level_irq);
--	else
--		__irq_set_handler_locked(d->irq, handle_edge_irq);
--
--	return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--					 const struct cpumask *dest,
--					 bool force)
--{
--	if (!irqd_irq_disabled(data))
--		internal_irq_unmask(data, dest);
--
--	return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--	.name		= "bcm63xx_ipic",
--	.irq_mask	= bcm63xx_internal_irq_mask,
--	.irq_unmask	= bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--	.name		= "bcm63xx_epic",
--	.irq_ack	= bcm63xx_external_irq_clear,
--
--	.irq_mask	= bcm63xx_external_irq_mask,
--	.irq_unmask	= bcm63xx_external_irq_unmask,
--
--	.irq_set_type	= bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_ip2",
--	.flags		= IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_ip3",
--	.flags		= IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--	.handler	= no_action,
--	.name		= "cascade_extirq",
--	.flags		= IRQF_NO_THREAD,
--};
--
- static void bcm63xx_init_irq(void)
- {
--	int irq_bits;
--
--	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--	irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--	irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+	void __iomem *periph_bases[2];
-+	void __iomem *ext_intc_bases[2];
-+	int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+	int periph_irqs[2] = { 2, 3 };
-+	int ext_irqs[6];
-+
-+	periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+	ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM3368_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--		irq_stat_addr[1] = 0;
--		irq_stat_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+		periph_bases[0] += PERF_IRQMASK_3368_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+		ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+		ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+		ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6328_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--		irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+		periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6338_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+		periph_bases[0] += PERF_IRQMASK_6338_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 4;
- 		break;
- 	case BCM6345_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+		periph_bases[0] += PERF_IRQMASK_6345_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 4;
- 		break;
- 	case BCM6348_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--		irq_stat_addr[1] = 0;
--		irq_mask_addr[1] = 0;
--		irq_bits = 32;
--		ext_irq_count = 4;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+		periph_bases[0] += PERF_IRQMASK_6348_REG;
-+		periph_irq_count = 1;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = 3;
-+		ext_irqs[1] = 4;
-+		ext_irqs[2] = 5;
-+		ext_irqs[3] = 6;
-+		ext_shift = 5;
- 		break;
- 	case BCM6358_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--		irq_bits = 32;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+		periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 1;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6362_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--		irq_bits = 64;
--		ext_irq_count = 4;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+		periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+		ext_shift = 4;
- 		break;
- 	case BCM6368_CPU_ID:
--		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--		irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--		irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--		irq_bits = 64;
-+		periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 2;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+		ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
- 		ext_irq_count = 6;
--		is_ext_irq_cascaded = 1;
--		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+		ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+		ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+		ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+		ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+		ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+		ext_shift = 4;
- 		break;
- 	default:
- 		BUG();
- 	}
- 
--	if (irq_bits == 32) {
--		dispatch_internal = __dispatch_internal_32;
--		internal_irq_mask = __internal_irq_mask_32;
--		internal_irq_unmask = __internal_irq_unmask_32;
--	} else {
--		dispatch_internal = __dispatch_internal_64;
--		internal_irq_mask = __internal_irq_mask_64;
--		internal_irq_unmask = __internal_irq_unmask_64;
--	}
-+	mips_cpu_irq_init();
-+	bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases, periph_width);
-+	bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+	if (ext_irq_count > 4)
-+		bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+				      ext_shift);
- }
- 
- void __init arch_init_irq(void)
- {
--	int i;
--
- 	bcm63xx_init_irq();
--	mips_cpu_irq_init();
--	for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--		irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--					 handle_level_irq);
--
--	for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--		irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--					 handle_edge_irq);
--
--	if (!is_ext_irq_cascaded) {
--		for (i = 3; i < 3 + ext_irq_count; ++i)
--			setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--	}
--
--	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--	if (is_ext_irq_cascaded) {
--		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--		bcm63xx_internal_irq_chip.irq_set_affinity =
--			bcm63xx_internal_set_affinity;
--
--		cpumask_clear(irq_default_affinity);
--		cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--	}
--#endif
- }
diff --git a/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644
index 5d7371ccf9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From fc8b863c38be9b2ccf805dd5ae17dbffb6bfbe87 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -109,11 +109,14 @@ static void bcm63xx_init_irq(void)
- 		periph_width = 1;
- 
- 		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--		ext_irq_count = 4;
-+		ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+		ext_irq_count = 6;
- 		ext_irqs[0] = BCM_6358_EXT_IRQ0;
- 		ext_irqs[1] = BCM_6358_EXT_IRQ1;
- 		ext_irqs[2] = BCM_6358_EXT_IRQ2;
- 		ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+		ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+		ext_irqs[5] = BCM_6358_EXT_IRQ5;
- 		ext_shift = 4;
- 		break;
- 	case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -940,6 +940,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1		(IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4		(IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5		(IRQ_INTERNAL_BASE + 21)
- 
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -243,6 +243,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362	0x18
- #define PERF_EXTIRQ_CFG_REG_6368	0x18
- 
-+#define PERF_EXTIRQ_CFG_REG2_6358	0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368	0x1c
- 
- /* for 6348 only */
diff --git a/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644
index 3f24473e4b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- 
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- 
- };
- 
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+	return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
- 	return bcm63xx_cpu_rev;
-@@ -334,6 +343,7 @@ void __init bcm63xx_cpu_init(void)
- 	/* read out CPU type */
- 	tmp = bcm_readl(chipid_reg);
- 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
- 
- 	switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -19,6 +19,7 @@
- #define BCM6368_CPU_ID		0x6368
- 
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- 
-@@ -82,6 +83,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
- 
-+#define BCMCPU_VARIANT_IS_3368() \
-+	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+	(bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644
index 2e21c65009..0000000000
--- a/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG			0x0
- #define REV_CHIPID_SHIFT		16
- #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT			12
-+#define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT			0
- #define REV_REVID_MASK			(0xff << REV_REVID_SHIFT)
- 
diff --git a/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644
index dc7fbfcd11..0000000000
--- a/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -306,6 +306,7 @@ void __init bcm63xx_cpu_init(void)
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 	unsigned int cpu = smp_processor_id();
- 	u32 chipid_reg;
-+	u8 __maybe_unused varid = 0;
- 
- 	/* soc registers location depends on cpu type */
- 	chipid_reg = 0;
-@@ -345,6 +346,7 @@ void __init bcm63xx_cpu_init(void)
- 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
- 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
- 
- 	switch (bcm63xx_cpu_id) {
- 	case BCM3368_CPU_ID:
-@@ -354,6 +356,14 @@ void __init bcm63xx_cpu_init(void)
- 	case BCM6328_CPU_ID:
- 		bcm63xx_regs_base = bcm6328_regs_base;
- 		bcm63xx_irqs = bcm6328_irqs;
-+
-+		if (varid == 1)
-+			bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+		else if (varid == 3)
-+			bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+		else
-+			pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
- 		break;
- 	case BCM6338_CPU_ID:
- 		bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,8 @@
-  */
- #define BCM3368_CPU_ID		0x3368
- #define BCM6328_CPU_ID		0x6328
-+#define BCM63281_CPU_ID		0x63281
-+#define BCM63283_CPU_ID		0x63283
- #define BCM6338_CPU_ID		0x6338
- #define BCM6345_CPU_ID		0x6345
- #define BCM6348_CPU_ID		0x6348
-@@ -85,8 +87,10 @@ static inline u16 __pure bcm63xx_get_cpu
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+	(bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
- 	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644
index f70c81cdf7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -384,6 +384,14 @@ void __init bcm63xx_cpu_init(void)
- 	case BCM6362_CPU_ID:
- 		bcm63xx_regs_base = bcm6362_regs_base;
- 		bcm63xx_irqs = bcm6362_irqs;
-+
-+		if (varid == 1)
-+			bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+		else if (varid == 2)
-+			bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+		else
-+			pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
- 		break;
- 	case BCM6368_CPU_ID:
- 		bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -17,6 +17,7 @@
- #define BCM6345_CPU_ID		0x6345
- #define BCM6348_CPU_ID		0x6348
- #define BCM6358_CPU_ID		0x6358
-+#define BCM6361_CPU_ID		0x6361
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
- 
-@@ -99,6 +100,8 @@ static inline u16 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
- 	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+	(bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
- 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644
index d4f1c5de0b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -394,8 +394,12 @@ void __init bcm63xx_cpu_init(void)
- 
- 		break;
- 	case BCM6368_CPU_ID:
-+	case BCM6369_CPU_ID:
- 		bcm63xx_regs_base = bcm6368_regs_base;
- 		bcm63xx_irqs = bcm6368_irqs;
-+
-+		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+		bcm63xx_cpu_id = BCM6368_CPU_ID;
- 		break;
- 	default:
- 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6361_CPU_ID		0x6361
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
-+#define BCM6369_CPU_ID		0x6369
- 
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -106,6 +107,8 @@ static inline u16 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
- 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- 
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644
index 3230add278..0000000000
--- a/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,7 +41,7 @@
- 					BCM_CB_MEM_SIZE - 1)
- 
- #define BCM_PCIE_MEM_BASE_PA		0x10f00000
--#define BCM_PCIE_MEM_SIZE		(16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
- 					BCM_PCIE_MEM_SIZE - 1)
- 
diff --git a/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644
index d6eb54d2e8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,10 +40,10 @@
- #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
- 					BCM_CB_MEM_SIZE - 1)
- 
--#define BCM_PCIE_MEM_BASE_PA		0x10f00000
--#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
--					BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
-+					BCM_PCIE_MEM_SIZE_6328 - 1)
- 
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- 
- static struct resource bcm_pcie_mem_resource = {
- 	.name	= "bcm63xx PCIe memory space",
--	.start	= BCM_PCIE_MEM_BASE_PA,
--	.end	= BCM_PCIE_MEM_END_PA,
-+	.start	= 0,
-+	.end	= 0,
- 	.flags	= IORESOURCE_MEM,
- };
- 
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
- 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
- 
- 	/* set bar0 to little endian */
--	val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--	val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
- 	val |= BASEMASK_REMAP_EN;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
- 
--	val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
- 
- 	register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
- 	if (!bcm63xx_pci_enabled)
- 		return -ENODEV;
- 
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+	}
-+
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644
index 0ead82e862..0000000000
--- a/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
- 
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- 
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- 
- static unsigned int detect_cpu_clock(void)
- {
--	u16 cpu_id = bcm63xx_get_cpu_id();
-+	u32 cpu_id = bcm63xx_get_cpu_id();
- 
- 	switch (cpu_id) {
- 	case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- 
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
- 	switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -69,11 +69,11 @@ static inline u16 __pure __bcm63xx_get_c
- 	return cpu_id;
- }
- 
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
- 
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--	const u16 cpu_id = bcm63xx_cpu_id;
-+	const u32 cpu_id = bcm63xx_cpu_id;
- 
- 	return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644
index 9132e42312..0000000000
--- a/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -1,10 +1,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
- 
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- 
- #define IRQ_INTERNAL_BASE		8
--#define IRQ_EXTERNAL_BASE		100
-+#define NR_INTERNAL_IRQS		128
-+#define IRQ_EXTERNAL_BASE		(IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0			(IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1			(IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2			(IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -1,7 +1,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
- 
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- 
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644
index 9a0ee204fd..0000000000
--- a/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
+++ /dev/null
@@ -1,739 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -60,6 +60,11 @@ config BCM63XX_CPU_6368
- 	select HW_HAS_PCI
- 	select BCM63XX_OHCI
- 	select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+	bool "support 63268 CPU"
-+	select SYS_HAS_CPU_BMIPS4350
-+	select HW_HAS_PCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -717,7 +717,7 @@ void __init board_prom_init(void)
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
- 	 */
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
- 		val = 0x18000000;
- 	} else {
- 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk,
- 				CKCTL_6368_SWPKT_USB_EN |
- 				CKCTL_6368_SWPKT_SAR_EN,
- 				enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
- 	else
- 		return;
- 
-@@ -177,6 +179,8 @@ static void usbh_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
- 	else
- 		return;
- 
-@@ -199,6 +203,8 @@ static void usbd_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
- 	else if (BCMCPU_IS_6368())
- 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
- 	else
- 		return;
- 
-@@ -225,9 +231,13 @@ static void spi_set(struct clk *clk, int
- 		mask = CKCTL_6358_SPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_SPI_EN;
--	else
--		/* BCMCPU_IS_6368 */
-+	else if (BCMCPU_IS_6368())
- 		mask = CKCTL_6368_SPI_EN;
-+	else if (BCMCPU_IS_63268())
-+		mask = CKCTL_63268_SPI_EN;
-+	else
-+		return;
-+
- 	bcm_hwclock_set(mask, enable);
- }
- 
-@@ -246,6 +256,8 @@ static void hsspi_set(struct clk *clk, i
- 		mask = CKCTL_6328_HSSPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_HSSPI_EN;
-+	else if (BCMCPU_IS_63268())
-+		mask = CKCTL_63268_HSSPI_EN;
- 	else
- 		return;
- 
-@@ -307,6 +319,8 @@ static void pcie_set(struct clk *clk, in
- 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
- 	else if (BCMCPU_IS_6362())
- 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+	else if (BCMCPU_IS_63268())
-+		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- 
- static struct clk clk_pcie = {
-@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev,
- 		return &clk_periph;
- 	if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
- 		return &clk_pcm;
--	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
-+	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
-+	    !strcmp(id, "ipsec"))
- 		return &clk_ipsec;
--	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
-+	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+	    !strcmp(id, "pcie"))
- 		return &clk_pcie;
- 	return ERR_PTR(-ENOENT);
- }
-@@ -411,6 +427,7 @@ static int __init bcm63xx_clk_init(void)
- 		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
- 		break;
- 	case BCM6362_CPU_ID:
-+	case BCM63268_CPU_ID:
- 		clk_hsspi.rate = HSSPI_PLL_HZ_6362;
- 		break;
- 	}
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- 
- };
- 
-+static const unsigned long bcm63268_regs_base[] = {
-+	__GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+	__GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
- 	return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
- 
- 		return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
- 	}
-+	case BCM63268_CPU_ID:
-+	{
-+		unsigned int tmp, mips_pll_fcvo;
-+
-+		tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+				STRAPBUS_63268_FCVO_SHIFT;
-+		switch (mips_pll_fcvo) {
-+		case 0x3:
-+		case 0xe:
-+			return 320000000;
-+		case 0xa:
-+			return 333000000;
-+		case 0x2:
-+		case 0xb:
-+		case 0xf:
-+			return 400000000;
-+		default:
-+			return 0;
-+		}
-+	}
- 
- 	default:
- 		panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
- 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- 	u32 val;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
- 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
- 
- 	if (BCMCPU_IS_6345()) {
-@@ -306,6 +336,7 @@ void __init bcm63xx_cpu_init(void)
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 	unsigned int cpu = smp_processor_id();
- 	u32 chipid_reg;
-+	bool long_chipid = false;
- 	u8 __maybe_unused varid = 0;
- 
- 	/* soc registers location depends on cpu type */
-@@ -327,6 +358,9 @@ void __init bcm63xx_cpu_init(void)
- 		case 0x10:
- 			chipid_reg = BCM_6345_PERF_BASE;
- 			break;
-+		case 0x80:
-+			long_chipid = true;
-+			/* fall-through */
- 		default:
- 			chipid_reg = BCM_6368_PERF_BASE;
- 			break;
-@@ -334,6 +368,7 @@ void __init bcm63xx_cpu_init(void)
- 		break;
- 	}
- 
-+
- 	/*
- 	 * really early to panic, but delaying panic would not help since we
- 	 * will never get any working console
-@@ -343,10 +378,17 @@ void __init bcm63xx_cpu_init(void)
- 
- 	/* read out CPU type */
- 	tmp = bcm_readl(chipid_reg);
--	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--	bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+	if (long_chipid) {
-+		bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+		bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+	} else {
-+		bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+		varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+	}
-+
- 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 
- 	switch (bcm63xx_cpu_id) {
- 	case BCM3368_CPU_ID:
-@@ -401,6 +443,15 @@ void __init bcm63xx_cpu_init(void)
- 		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
- 		bcm63xx_cpu_id = BCM6368_CPU_ID;
- 		break;
-+	case BCM63168_CPU_ID:
-+	case BCM63169_CPU_ID:
-+	case BCM63268_CPU_ID:
-+	case BCM63269_CPU_ID:
-+		bcm63xx_regs_base = bcm63268_regs_base;
-+		bcm63xx_irqs = bcm63268_irqs;
-+
-+		bcm63xx_cpu_id = BCM63268_CPU_ID;
-+		break;
- 	default:
- 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
- 		break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
- 		case STRAPBUS_6368_BOOT_SEL_PARALLEL:
- 			return BCM63XX_FLASH_TYPE_PARALLEL;
- 		}
-+	case BCM63268_CPU_ID:
-+		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+			return BCM63XX_FLASH_TYPE_SERIAL;
-+		else
-+			return BCM63XX_FLASH_TYPE_NAND;
- 	default:
- 		return -EINVAL;
- 	}
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
- 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
- 		bcm63xx_regs_spi = bcm6348_regs_spi;
- 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
--		BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+		BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268())
- 		bcm63xx_regs_spi = bcm6358_regs_spi;
- }
- 
-@@ -85,7 +85,7 @@ int __init bcm63xx_spi_register(void)
- 	}
- 
- 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--		BCMCPU_IS_6368()) {
-+		BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
- 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
- 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
- 		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -150,6 +150,20 @@ static void bcm63xx_init_irq(void)
- 		ext_irqs[5] = BCM_6368_EXT_IRQ5;
- 		ext_shift = 4;
- 		break;
-+	case BCM63268_CPU_ID:
-+		periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+		periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+		periph_irq_count = 2;
-+		periph_width = 4;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+		ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+		ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+		ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+		ext_shift = 4;
-+		break;
- 	default:
- 		BUG();
- 	}
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -125,6 +125,20 @@
- #define BCM6368_RESET_PCIE	0
- #define BCM6368_RESET_PCIE_EXT	0
- 
-+#define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET	0
-+#define BCM63268_RESET_USBH	SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD	SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL	0
-+#define BCM63268_RESET_SAR	SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY	0
-+#define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI	0
-+#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
-+				 SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] =
- 	__GEN_RESET_BITS_TABLE(6368)
- };
- 
-+static const u32 bcm63268_reset_bits[] = {
-+	__GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
- 
-@@ -182,6 +200,9 @@ static int __init bcm63xx_reset_bits_ini
- 	} else if (BCMCPU_IS_6368()) {
- 		reset_reg = PERF_SOFTRESET_6368_REG;
- 		bcm63xx_reset_bits = bcm6368_reset_bits;
-+	} else if (BCMCPU_IS_63268()) {
-+		reset_reg = PERF_SOFTRESET_63268_REG;
-+		bcm63xx_reset_bits = bcm63268_reset_bits;
- 	}
- 
- 	return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,10 @@
- #define BCM6362_CPU_ID		0x6362
- #define BCM6368_CPU_ID		0x6368
- #define BCM6369_CPU_ID		0x6369
-+#define BCM63168_CPU_ID		0x63168
-+#define BCM63169_CPU_ID		0x63169
-+#define BCM63268_CPU_ID		0x63268
-+#define BCM63269_CPU_ID		0x63269
- 
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -61,6 +65,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
- 		case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+		case BCM63268_CPU_ID:
-+#endif
- 		break;
- 	default:
- 		unreachable();
-@@ -86,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()	(bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -109,6 +118,14 @@ static inline u32 __pure bcm63xx_get_cpu
- 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
- 	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+	(bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+	(bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+	(bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+	(bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- 
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -573,6 +590,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE		(0xb0004180)
- #define BCM_6368_MISC_BASE		(0xdeadbeef)
- 
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE		(0xdeadbeef)
-+#define BCM_63268_PERF_BASE		(0xb0000000)
-+#define BCM_63268_TIMER_BASE		(0xb0000080)
-+#define BCM_63268_WDT_BASE		(0xb000009c)
-+#define BCM_63268_UART0_BASE		(0xb0000180)
-+#define BCM_63268_UART1_BASE		(0xb00001a0)
-+#define BCM_63268_GPIO_BASE		(0xb00000c0)
-+#define BCM_63268_SPI_BASE		(0xb0000800)
-+#define BCM_63268_HSSPI_BASE		(0xb0001000)
-+#define BCM_63268_UDC0_BASE		(0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE		(0xb000c800)
-+#define BCM_63268_OHCI0_BASE		(0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE	(0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE	(0xb0002700)
-+#define BCM_63268_USBD_BASE		(0xb0002400)
-+#define BCM_63268_MPI_BASE		(0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE		(0xdeadbeef)
-+#define BCM_63268_PCIE_BASE		(0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE	(0xdeadbeef)
-+#define BCM_63268_DSL_BASE		(0xdeadbeef)
-+#define BCM_63268_UBUS_BASE		(0xdeadbeef)
-+#define BCM_63268_ENET0_BASE		(0xdeadbeef)
-+#define BCM_63268_ENET1_BASE		(0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE		(0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE		(0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE		(0xb000dc00)
-+#define BCM_63268_ENETSW_BASE		(0xb0700000)
-+#define BCM_63268_EHCI0_BASE		(0xb0002500)
-+#define BCM_63268_SDRAM_BASE		(0xdeadbeef)
-+#define BCM_63268_MEMC_BASE		(0xdeadbeef)
-+#define BCM_63268_DDR_BASE		(0xb0003000)
-+#define BCM_63268_M2M_BASE		(0xdeadbeef)
-+#define BCM_63268_ATM_BASE		(0xdeadbeef)
-+#define BCM_63268_XTM_BASE		(0xb0007000)
-+#define BCM_63268_XTMDMA_BASE		(0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE		(0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE		(0xdeadbeef)
-+#define BCM_63268_PCM_BASE		(0xb000b000)
-+#define BCM_63268_PCMDMA_BASE		(0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE		(0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE		(0xdeadbeef)
-+#define BCM_63268_RNG_BASE		(0xdeadbeef)
-+#define BCM_63268_MISC_BASE		(0xb0001800)
- 
- extern const unsigned long *bcm63xx_regs_base;
- 
-@@ -1086,6 +1149,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4		(IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5		(IRQ_INTERNAL_BASE + 25)
- 
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE	(BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ		(BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ		(IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ		(IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ		0
-+#define BCM_63268_ENET0_IRQ		0
-+#define BCM_63268_ENET1_IRQ		0
-+#define BCM_63268_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ		(IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ	(BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ	(BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ		0
-+#define BCM_63268_ENET0_RXDMA_IRQ	0
-+#define BCM_63268_ENET0_TXDMA_IRQ	0
-+#define BCM_63268_ENET1_RXDMA_IRQ	0
-+#define BCM_63268_ENET1_TXDMA_IRQ	0
-+#define BCM_63268_PCI_IRQ		(BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ		0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ	(IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ		(BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ		(BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ		(BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ		(IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ		(IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ		(BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ		(IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ		(IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ	(IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ	(IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ	(IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ	(IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ	(IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ		(IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ		(IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0		(BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1		(BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2		(BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3		(BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- 
- #define __GEN_CPU_IRQ_TABLE(__cpu)					\
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -22,6 +22,8 @@ static inline unsigned long bcm63xx_gpio
- 		return 48;
- 	case BCM6368_CPU_ID:
- 		return 38;
-+	case BCM63268_CPU_ID:
-+		return 52;
- 	case BCM6348_CPU_ID:
- 	default:
- 		return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG			0x0
- #define REV_CHIPID_SHIFT		16
- #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT		12
-+#define REV_LONG_CHIPID_MASK		(0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT			12
- #define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT			0
-@@ -211,6 +213,52 @@
- 					CKCTL_6368_NAND_EN |		\
- 					CKCTL_6368_IPSEC_EN)
- 
-+#define CKCTL_63268_DISABLE_GLESS	(1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN	(1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN		(1 << 2)
-+#define CKCTL_63268_VDSL_EN		(1 << 3)
-+#define CKCTL_63268_MIPS_EN		(1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN		(1 << 5)
-+#define CKCTL_63268_DECT_EN		(1 << 6)
-+#define CKCTL_63268_FAP0_EN		(1 << 7)
-+#define CKCTL_63268_FAP1_EN		(1 << 8)
-+#define CKCTL_63268_SAR_EN		(1 << 9)
-+#define CKCTL_63268_ROBOSW_EN		(1 << 10)
-+#define CKCTL_63268_PCM_EN		(1 << 11)
-+#define CKCTL_63268_USBD_EN		(1 << 12)
-+#define CKCTL_63268_USBH_EN		(1 << 13)
-+#define CKCTL_63268_IPSEC_EN		(1 << 14)
-+#define CKCTL_63268_SPI_EN		(1 << 15)
-+#define CKCTL_63268_HSSPI_EN		(1 << 16)
-+#define CKCTL_63268_PCIE_EN		(1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN		(1 << 18)
-+#define CKCTL_63268_GMAC_EN		(1 << 19)
-+#define CKCTL_63268_NAND_EN		(1 << 20)
-+#define CKCTL_63268_TBUS_EN		(1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN	(1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN		(CKCTL_63268_VDSL_QPROC_EN |	\
-+					CKCTL_63268_VDSL_AFE_EN |	\
-+					CKCTL_63268_VDSL_EN |		\
-+					CKCTL_63268_WLAN_OCP_EN |	\
-+					CKCTL_63268_DECT_EN |		\
-+					CKCTL_63268_FAP0_EN |		\
-+					CKCTL_63268_FAP1_EN |		\
-+					CKCTL_63268_SAR_EN |		\
-+					CKCTL_63268_ROBOSW_EN |		\
-+					CKCTL_63268_PCM_EN |		\
-+					CKCTL_63268_USBD_EN |		\
-+					CKCTL_63268_USBH_EN |		\
-+					CKCTL_63268_IPSEC_EN |		\
-+					CKCTL_63268_SPI_EN |		\
-+					CKCTL_63268_HSSPI_EN |		\
-+					CKCTL_63268_PCIE_EN |		\
-+					CKCTL_63268_PHYMIPS_EN |	\
-+					CKCTL_63268_GMAC_EN |		\
-+					CKCTL_63268_NAND_EN |		\
-+					CKCTL_63268_TBUS_EN |		\
-+					CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register	*/
- #define PERF_SYS_PLL_CTL_REG		0x8
- #define SYS_PLL_SOFT_RESET		0x1
-@@ -224,6 +272,7 @@
- #define PERF_IRQMASK_6358_REG(x)	(0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)	(0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)	(0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)	(0x20 + (x) * 0x20)
- 
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG		0x10
-@@ -234,6 +283,7 @@
- #define PERF_IRQSTAT_6358_REG(x)	(0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)	(0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)	(0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)	(0x30 + (x) * 0x20)
- 
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368	0x14
-@@ -244,6 +294,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358	0x14
- #define PERF_EXTIRQ_CFG_REG_6362	0x18
- #define PERF_EXTIRQ_CFG_REG_6368	0x18
-+#define PERF_EXTIRQ_CFG_REG_63268	0x18
- 
- #define PERF_EXTIRQ_CFG_REG2_6358	0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368	0x1c
-@@ -274,6 +325,7 @@
- #define PERF_SOFTRESET_6358_REG		0x34
- #define PERF_SOFTRESET_6362_REG		0x10
- #define PERF_SOFTRESET_6368_REG		0x10
-+#define PERF_SOFTRESET_63268_REG	0x10
- 
- #define SOFTRESET_3368_SPI_MASK		(1 << 0)
- #define SOFTRESET_3368_ENET_MASK	(1 << 2)
-@@ -367,6 +419,26 @@
- #define SOFTRESET_6368_USBH_MASK	(1 << 12)
- #define SOFTRESET_6368_PCM_MASK		(1 << 13)
- 
-+#define SOFTRESET_63268_SPI_MASK	(1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK	(1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK	(1 << 2)
-+#define SOFTRESET_63268_SAR_MASK	(1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK	(1 << 4)
-+#define SOFTRESET_63268_USBS_MASK	(1 << 5)
-+#define SOFTRESET_63268_USBH_MASK	(1 << 6)
-+#define SOFTRESET_63268_PCM_MASK	(1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK	(1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK	(1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK	(1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK	(1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK	(1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK	(1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK	(1 << 14)
-+#define SOFTRESET_63268_DECT_MASK	(1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK	(1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK	(1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK	(1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG		0x34
- #define MIPSPLLCTL_N1_SHIFT		20
-@@ -1380,6 +1452,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL	(1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND	(0 << 15)
- 
-+#define MISC_STRAPBUS_63268_REG		0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST	(1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL	(1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND	(0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT	21
-+#define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG		0x240
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -25,6 +25,7 @@ static inline int is_bcm63xx_internal_re
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM6368_CPU_ID:
-+	case BCM63268_CPU_ID:
- 		if (offset >= 0xb0000000 && offset < 0xb1000000)
- 			return 1;
- 		break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- 
- int __init bcm63xx_hsspi_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,7 +176,8 @@ static int __init register_shared(void)
- 	else
- 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+		BCMCPU_IS_63268())
- 		chan_count = 32;
- 	else if (BCMCPU_IS_6345())
- 		chan_count = 8;
-@@ -276,7 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
- 	int ret;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+		!BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	ret = register_shared();
-@@ -295,8 +297,11 @@ bcm63xx_enetsw_register(const struct bcm
- 
- 	if (BCMCPU_IS_6328())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
--	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+		 BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+	else if (BCMCPU_VARIANT_IS_63268() ||  BCMCPU_VARIANT_IS_63269())
-+		enetsw_pd.num_ports = ENETSW_PORTS_63268;
- 
- 	enetsw_pd.dma_has_sram = true;
- 	enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -62,6 +62,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT	8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- 
- #define ENETSW_RGMII_PORT0	4
- 
diff --git a/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644
index 4e8a090791..0000000000
--- a/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -136,7 +136,8 @@
- #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI	0
- #define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
--				 SOFTRESET_63268_PCIE_CORE_MASK)
-+				 SOFTRESET_63268_PCIE_CORE_MASK | \
-+				 SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
- 
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -45,6 +45,11 @@
- #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
- 					BCM_PCIE_MEM_SIZE_6328 - 1)
- 
-+#define BCM_PCIE_MEM_BASE_PA_63268	0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268		(15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268	(BCM_PCIE_MEM_BASE_PA_63268 +	\
-+					BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
- 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
- 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
- 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+	} else if (BCMCPU_IS_63268()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
- 	}
- 
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
-+	case BCM63268_CPU_ID:
- 		return bcm63xx_register_pcie();
- 	case BCM3368_CPU_ID:
- 	case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644
index 2dec1337f2..0000000000
--- a/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
+++ /dev/null
@@ -1,675 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -18,6 +18,11 @@ config BCM63XX_EHCI
- 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
- 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
- 
-+config BCM63XX_CPU_6318
-+	bool "support 6318 CPU"
-+	select SYS_HAS_CPU_BMIPS32_3300
-+	select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -717,7 +717,7 @@ void __init board_prom_init(void)
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
- 	 */
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
- 		val = 0x18000000;
- 	} else {
- 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -252,7 +252,9 @@ static void hsspi_set(struct clk *clk, i
- {
- 	u32 mask;
- 
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318())
-+		mask = CKCTL_6318_HSSPI_EN;
-+	else if (BCMCPU_IS_6328())
- 		mask = CKCTL_6328_HSSPI_EN;
- 	else if (BCMCPU_IS_6362())
- 		mask = CKCTL_6362_HSSPI_EN;
-@@ -417,12 +419,16 @@ void clk_put(struct clk *clk)
- 
- EXPORT_SYMBOL(clk_put);
- 
-+#define HSSPI_PLL_HZ_6318	250000000
- #define HSSPI_PLL_HZ_6328	133333333
- #define HSSPI_PLL_HZ_6362	400000000
- 
- static int __init bcm63xx_clk_init(void)
- {
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
-+		clk_hsspi.rate = HSSPI_PLL_HZ_6318;
-+		break;
- 	case BCM6328_CPU_ID:
- 		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
- 		break;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
- 	__GEN_CPU_IRQ_TABLE(3368)
- };
- 
-+static const unsigned long bcm6318_regs_base[] = {
-+	__GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+	__GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
- 	__GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
- 	return bcm63xx_memory_size;
- }
- 
-+#define STRAP_OVERRIDE_BUS_REG		0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT	23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK	(0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
- 	u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
- 	case BCM3368_CPU_ID:
- 		return 300000000;
- 
-+	case BCM6318_CPU_ID:
-+	{
-+		unsigned int tmp, mips_pll_fcvo;
-+
-+		tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+		pr_info("strap_override_bus = %08x\n", tmp);
-+
-+		mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+				>> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+		switch (mips_pll_fcvo) {
-+		case 0:
-+			return 166000000;
-+		case 1:
-+			return 400000000;
-+		case 2:
-+			return 250000000;
-+		case 3:
-+			return 333000000;
-+		};
-+	}
- 	case BCM6328_CPU_ID:
- 	{
- 		unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
- 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- 	u32 val;
- 
-+	if (BCMCPU_IS_6318()) {
-+		val = bcm_sdram_readl(SDRAM_CFG_REG);
-+		val = val & SDRAM_CFG_6318_SPACE_MASK;
-+		val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+		return 1 << (val + 20);
-+	}
-+
- 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
- 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
- 
-@@ -344,6 +385,12 @@ void __init bcm63xx_cpu_init(void)
- 
- 	switch (c->cputype) {
- 	case CPU_BMIPS3300:
-+		if ((read_c0_prid() & 0xff) >= 0x33) {
-+			/* BCM6318 */
-+			chipid_reg = BCM_6368_PERF_BASE;
-+			break;
-+		}
-+
- 		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
- 			__cpu_name[cpu] = "Broadcom BCM6338";
- 		/* fall-through */
-@@ -391,6 +438,10 @@ void __init bcm63xx_cpu_init(void)
- 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
- 
- 	switch (bcm63xx_cpu_id) {
-+	case BCM6318_CPU_ID:
-+		bcm63xx_regs_base = bcm6318_regs_base;
-+		bcm63xx_irqs = bcm6318_irqs;
-+		break;
- 	case BCM3368_CPU_ID:
- 		bcm63xx_regs_base = bcm3368_regs_base;
- 		bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
- 	u32 val;
- 
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
-+		/* only support serial flash */
-+		return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6328_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
- 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -70,7 +70,7 @@ static struct platform_device bcm63xx_sp
- 
- int __init bcm63xx_spi_register(void)
- {
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -49,6 +49,19 @@ static void bcm63xx_init_irq(void)
- 		ext_irqs[3] = BCM_3368_EXT_IRQ3;
- 		ext_shift = 4;
- 		break;
-+	case BCM6318_CPU_ID:
-+		periph_bases[0] += PERF_IRQMASK_6318_REG;
-+		periph_irq_count = 1;
-+		periph_width = 4;
-+
-+		ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+		ext_irq_count = 4;
-+		ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+		ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+		ext_shift = 4;
-+		break;
- 	case BCM6328_CPU_ID:
- 		periph_bases[0] += PERF_IRQMASK_6328_REG(0);
- 		periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -72,7 +72,7 @@ void __init prom_init(void)
- 
- 			if (reg & OTP_6328_REG3_TP1_DISABLED)
- 				bmips_smp_enabled = 0;
--		} else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+		} else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
- 			bmips_smp_enabled = 0;
- 		}
- 
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -43,6 +43,23 @@
- #define BCM3368_RESET_PCIE	0
- #define BCM3368_RESET_PCIE_EXT	0
- 
-+
-+#define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET	0
-+#define BCM6318_RESET_USBH	SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD	SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL	0
-+#define BCM6318_RESET_SAR	SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY	SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM	0
-+#define BCM6318_RESET_MPI	0
-+#define BCM6318_RESET_PCIE	\
-+				(SOFTRESET_6318_PCIE_MASK |		\
-+				 SOFTRESET_6318_PCIE_CORE_MASK |	\
-+				 SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET	0
- #define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
-@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] =
- 	__GEN_RESET_BITS_TABLE(3368)
- };
- 
-+static const u32 bcm6318_reset_bits[] = {
-+	__GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
- 	__GEN_RESET_BITS_TABLE(6328)
- };
-@@ -183,6 +204,9 @@ static int __init bcm63xx_reset_bits_ini
- 	if (BCMCPU_IS_3368()) {
- 		reset_reg = PERF_SOFTRESET_6358_REG;
- 		bcm63xx_reset_bits = bcm3368_reset_bits;
-+	} else if (BCMCPU_IS_6318()) {
-+		reset_reg = PERF_SOFTRESET_6318_REG;
-+		bcm63xx_reset_bits = bcm6318_reset_bits;
- 	} else if (BCMCPU_IS_6328()) {
- 		reset_reg = PERF_SOFTRESET_6328_REG;
- 		bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -71,6 +71,9 @@ void bcm63xx_machine_reboot(void)
- 	case BCM3368_CPU_ID:
- 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
- 		break;
-+	case BCM6318_CPU_ID:
-+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+		break;
- 	case BCM6328_CPU_ID:
- 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
- 		break;
-@@ -110,7 +113,7 @@ void bcm63xx_machine_reboot(void)
- 		bcm6348_a1_reboot();
- 
- 	printk(KERN_INFO "triggering watchdog soft-reset...\n");
--	if (BCMCPU_IS_6328()) {
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
- 		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
- 	} else {
- 		reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -10,6 +10,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID		0x3368
-+#define BCM6318_CPU_ID		0x6318
- #define BCM6328_CPU_ID		0x6328
- #define BCM63281_CPU_ID		0x63281
- #define BCM63283_CPU_ID		0x63283
-@@ -38,6 +39,10 @@ static inline u32 __pure __bcm63xx_get_c
- 		case BCM3368_CPU_ID:
- #endif
- 
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+		case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
- 		case BCM6328_CPU_ID:
- #endif
-@@ -87,6 +92,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- 
- #define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()	(bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -98,6 +104,8 @@ static inline u32 __pure bcm63xx_get_cpu
- 
- #define BCMCPU_VARIANT_IS_3368() \
- 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+	(bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
- 	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -252,6 +260,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE		(0xdeadbeef)
- 
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE		(0xdeadbeef)
-+#define BCM_6318_PERF_BASE		(0xb0000000)
-+#define BCM_6318_TIMER_BASE		(0xb0000040)
-+#define BCM_6318_WDT_BASE		(0xb0000068)
-+#define BCM_6318_UART0_BASE		(0xb0000100)
-+#define BCM_6318_UART1_BASE		(0xdeadbeef)
-+#define BCM_6318_GPIO_BASE		(0xb0000080)
-+#define BCM_6318_SPI_BASE		(0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE		(0xb0003000)
-+#define BCM_6318_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE		(0xb0006800)
-+#define BCM_6318_OHCI0_BASE		(0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE		(0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE		(0xb0005200)
-+#define BCM_6318_USBD_BASE		(0xb0006000)
-+#define BCM_6318_MPI_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE		(0xdeadbeef)
-+#define BCM_6318_PCIE_BASE		(0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE	(0xdeadbeef)
-+#define BCM_6318_DSL_BASE		(0xdeadbeef)
-+#define BCM_6318_UBUS_BASE		(0xdeadbeef)
-+#define BCM_6318_ENET0_BASE		(0xdeadbeef)
-+#define BCM_6318_ENET1_BASE		(0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE		(0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE		(0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE		(0xb0088400)
-+#define BCM_6318_ENETSW_BASE		(0xb0080000)
-+#define BCM_6318_EHCI0_BASE		(0xb0005000)
-+#define BCM_6318_SDRAM_BASE		(0xb0004000)
-+#define BCM_6318_MEMC_BASE		(0xdeadbeef)
-+#define BCM_6318_DDR_BASE		(0xdeadbeef)
-+#define BCM_6318_M2M_BASE		(0xdeadbeef)
-+#define BCM_6318_ATM_BASE		(0xdeadbeef)
-+#define BCM_6318_XTM_BASE		(0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE		(0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE		(0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE		(0xdeadbeef)
-+#define BCM_6318_PCM_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE		(0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE		(0xdeadbeef)
-+#define BCM_6318_RNG_BASE		(0xdeadbeef)
-+#define BCM_6318_MISC_BASE		(0xb0000280)
-+#define BCM_6318_OTP_BASE		(0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE		(0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE		(0xdeadbeef)
-@@ -819,6 +877,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
- 
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE	(BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ		(IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ		0
-+#define BCM_6318_UART0_IRQ		(IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ		0
-+#define BCM_6318_DSL_IRQ		(IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ		0
-+#define BCM_6318_ENET0_IRQ		0
-+#define BCM_6318_ENET1_IRQ		0
-+#define BCM_6318_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ		(IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ	(IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ	(IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ	(IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ		0
-+#define BCM_6318_ENET0_RXDMA_IRQ	0
-+#define BCM_6318_ENET0_TXDMA_IRQ	0
-+#define BCM_6318_ENET1_RXDMA_IRQ	0
-+#define BCM_6318_ENET1_TXDMA_IRQ	0
-+#define BCM_6318_PCI_IRQ		(IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ		0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ	(BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ	(BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ	(BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ	(BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ		(BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ		(IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0		(IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1		(IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2		(IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3		(IRQ_INTERNAL_BASE + 27)
- 
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -52,6 +52,39 @@
- 					 CKCTL_3368_EMUSB_EN | \
- 					 CKCTL_3368_USBU_EN)
- 
-+#define CKCTL_6318_ADSL_ASB_EN		(1 << 0)
-+#define CKCTL_6318_USB_ASB_EN		(1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN		(1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN		(1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN	(1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN	(1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN		(1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN		(1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN		(1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN	(1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN		(1 << 10)
-+#define CKCTL_6318_ADSL_EN		(1 << 11)
-+#define CKCTL_6318_SAR125_EN		(1 << 12)
-+#define CKCTL_6318_MIPS_EN		(1 << 13)
-+#define CKCTL_6318_PCIE_EN		(1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN		(1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN		(1 << 17)
-+#define CKCTL_6318_SDR_EN		(1 << 19)
-+#define CKCTL_6318_USB_EN		(1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN		(1 << 25)
-+#define CKCTL_6318_PCIE25_EN		(1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN		(1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN		(1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN	(1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN		(CKCTL_6318_PHYMIPS_EN |	\
-+					CKCTL_6318_ADSL_QPROC_EN |	\
-+					CKCTL_6318_ADSL_AFE_EN |	\
-+					CKCTL_6318_ADSL_EN |		\
-+					CKCTL_6318_SAR_EN  |		\
-+					CKCTL_6318_USB_EN |		\
-+					CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN		(1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
-@@ -259,12 +292,27 @@
- 					CKCTL_63268_TBUS_EN |		\
- 					CKCTL_63268_ROBOSW250_EN)
- 
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG		0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN		(1 << 0)
-+#define UB_CKCTL_6318_ARB_EN		(1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN		(1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN		(1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN		(1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN	(1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN		(1 << 6)
-+#define UB_CKCTL_6318_SAR_EN		(1 << 7)
-+#define UB_CKCTL_6318_SDR_EN		(1 << 8)
-+#define UB_CKCTL_6318_USB_EN		(1 << 9)
-+
- /* System PLL Control register	*/
- #define PERF_SYS_PLL_CTL_REG		0x8
- #define SYS_PLL_SOFT_RESET		0x1
- 
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG		0xc
-+#define PERF_IRQMASK_6318_REG		0x20
- #define PERF_IRQMASK_6328_REG(x)	(0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG		0xc
- #define PERF_IRQMASK_6345_REG		0xc
-@@ -276,6 +324,7 @@
- 
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG		0x10
-+#define PERF_IRQSTAT_6318_REG		0x30
- #define PERF_IRQSTAT_6328_REG(x)	(0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG		0x10
- #define PERF_IRQSTAT_6345_REG		0x10
-@@ -287,6 +336,7 @@
- 
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368	0x14
-+#define PERF_EXTIRQ_CFG_REG_6318	0x18
- #define PERF_EXTIRQ_CFG_REG_6328	0x18
- #define PERF_EXTIRQ_CFG_REG_6338	0x14
- #define PERF_EXTIRQ_CFG_REG_6345	0x14
-@@ -321,6 +371,7 @@
- 
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG		0x28
-+#define PERF_SOFTRESET_6318_REG		0x10
- #define PERF_SOFTRESET_6328_REG		0x10
- #define PERF_SOFTRESET_6358_REG		0x34
- #define PERF_SOFTRESET_6362_REG		0x10
-@@ -334,6 +385,18 @@
- #define SOFTRESET_3368_USBS_MASK	(1 << 11)
- #define SOFTRESET_3368_PCM_MASK		(1 << 13)
- 
-+#define SOFTRESET_6318_SPI_MASK		(1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK	(1 << 1)
-+#define SOFTRESET_6318_SAR_MASK		(1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK	(1 << 3)
-+#define SOFTRESET_6318_USBS_MASK	(1 << 4)
-+#define SOFTRESET_6318_USBH_MASK	(1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK	(1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK	(1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK	(1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK	(1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK	(1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK		(1 << 0)
- #define SOFTRESET_6328_EPHY_MASK	(1 << 1)
- #define SOFTRESET_6328_SAR_MASK		(1 << 2)
-@@ -505,8 +568,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN	(1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN	(1 << 10)
- 
-+#define TIMER_IRQMASK_6318_REG		0x0
-+#define TIMER_IRQSTAT_6318_REG		0x4
-+#define IRQSTATMASK_TIMER0		(1 << 0)
-+#define IRQSTATMASK_TIMER1		(1 << 1)
-+#define IRQSTATMASK_TIMER2		(1 << 2)
-+#define IRQSTATMASK_TIMER3		(1 << 3)
-+#define IRQSTATMASK_WDT			(1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)		(0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)		(0x8 + (x * 4))
- #define TIMER_CTL0_REG			0x4
- #define TIMER_CTL1_REG			0x8
- #define TIMER_CTL2_REG			0xC
-@@ -1253,6 +1325,8 @@
- #define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT		13
- #define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT	4
-+#define SDRAM_CFG_6318_SPACE_MASK	(0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- 
- #define SDRAM_MBASE_REG			0xc
- 
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -22,6 +22,7 @@ static inline int is_bcm63xx_internal_re
- 		if (offset >= 0xfff00000)
- 			return 1;
- 		break;
-+	case BCM6318_CPU_ID:
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- 
- int __init bcm63xx_hsspi_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+		!BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
- 		IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
- 	int i;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- 		return 0;
- 
- 	usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,8 +176,8 @@ static int __init register_shared(void)
- 	else
- 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--		BCMCPU_IS_63268())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+		BCMCPU_IS_6368() || BCMCPU_IS_63268())
- 		chan_count = 32;
- 	else if (BCMCPU_IS_6345())
- 		chan_count = 8;
-@@ -277,8 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
- 	int ret;
- 
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--		!BCMCPU_IS_63268())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+		!BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return -ENODEV;
- 
- 	ret = register_shared();
-@@ -295,7 +295,7 @@ bcm63xx_enetsw_register(const struct bcm
- 
- 	memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
- 
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
- 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
- 	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
- 		 BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
-+		return 50;
- 	case BCM6328_CPU_ID:
- 		return 32;
- 	case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- 
- int __init bcm63xx_ehci_register(void)
- {
--	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- 		return 0;
- 
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644
index 71044f846e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -28,7 +28,9 @@
- 	[BCM63XX_RESET_PCM]		= BCM## __cpu ##_RESET_PCM,	\
- 	[BCM63XX_RESET_MPI]		= BCM## __cpu ##_RESET_MPI,	\
- 	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
--	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,
-+	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT, \
-+	[BCM63XX_RESET_PCIE_CORE]	= BCM## __cpu ##_RESET_PCIE_CORE, \
-+	[BCM63XX_RESET_PCIE_HARD]	= BCM## __cpu ##_RESET_PCIE_HARD,
- 
- #define BCM3368_RESET_SPI	SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET	SOFTRESET_3368_ENET_MASK
-@@ -42,6 +44,8 @@
- #define BCM3368_RESET_MPI	SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE	0
- #define BCM3368_RESET_PCIE_EXT	0
-+#define BCM3368_RESET_PCIE_CORE	0
-+#define BCM3368_RESET_PCIE_HARD	0
- 
- 
- #define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
-@@ -54,11 +58,10 @@
- #define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM	0
- #define BCM6318_RESET_MPI	0
--#define BCM6318_RESET_PCIE	\
--				(SOFTRESET_6318_PCIE_MASK |		\
--				 SOFTRESET_6318_PCIE_CORE_MASK |	\
--				 SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE	SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE	SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD	SOFTRESET_6318_PCIE_HARD_MASK
- 
- #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET	0
-@@ -70,11 +73,10 @@
- #define BCM6328_RESET_ENETSW	SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM	SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI	0
--#define BCM6328_RESET_PCIE	\
--				(SOFTRESET_6328_PCIE_MASK |		\
--				 SOFTRESET_6328_PCIE_CORE_MASK |	\
--				 SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE	SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT	SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE	SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD	SOFTRESET_6328_PCIE_HARD_MASK
- 
- #define BCM6338_RESET_SPI	SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET	SOFTRESET_6338_ENET_MASK
-@@ -88,6 +90,8 @@
- #define BCM6338_RESET_MPI	0
- #define BCM6338_RESET_PCIE	0
- #define BCM6338_RESET_PCIE_EXT	0
-+#define BCM6338_RESET_PCIE_CORE	0
-+#define BCM6338_RESET_PCIE_HARD	0
- 
- #define BCM6348_RESET_SPI	SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET	SOFTRESET_6348_ENET_MASK
-@@ -101,6 +105,8 @@
- #define BCM6348_RESET_MPI	0
- #define BCM6348_RESET_PCIE	0
- #define BCM6348_RESET_PCIE_EXT	0
-+#define BCM6348_RESET_PCIE_CORE	0
-+#define BCM6348_RESET_PCIE_HARD	0
- 
- #define BCM6358_RESET_SPI	SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET	SOFTRESET_6358_ENET_MASK
-@@ -114,6 +120,8 @@
- #define BCM6358_RESET_MPI	SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE	0
- #define BCM6358_RESET_PCIE_EXT	0
-+#define BCM6358_RESET_PCIE_CORE	0
-+#define BCM6358_RESET_PCIE_HARD	0
- 
- #define BCM6362_RESET_SPI	SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET	0
-@@ -125,9 +133,10 @@
- #define BCM6362_RESET_ENETSW	SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM	SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI	0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--				 SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT	SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE	SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD	0
- 
- #define BCM6368_RESET_SPI	SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET	0
-@@ -141,6 +150,8 @@
- #define BCM6368_RESET_MPI	SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE	0
- #define BCM6368_RESET_PCIE_EXT	0
-+#define BCM6368_RESET_PCIE_CORE	0
-+#define BCM6368_RESET_PCIE_HARD	0
- 
- #define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET	0
-@@ -152,10 +163,10 @@
- #define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI	0
--#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
--				 SOFTRESET_63268_PCIE_CORE_MASK | \
--				 SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE	SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE	SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD	SOFTRESET_63268_PCIE_HARD_MASK
- 
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -14,6 +14,8 @@ enum bcm63xx_core_reset {
- 	BCM63XX_RESET_MPI,
- 	BCM63XX_RESET_PCIE,
- 	BCM63XX_RESET_PCIE_EXT,
-+	BCM63XX_RESET_PCIE_CORE,
-+	BCM63XX_RESET_PCIE_HARD,
- };
- 
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
- 
- 	/* reset the PCIe core */
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+		mdelay(10);
-+		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+	}
- 	mdelay(10);
- 
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
- 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
- 	mdelay(10);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644
index 3ac08b471e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -50,6 +50,18 @@ static void bcm_hwclock_set(u32 mask, in
- 	bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
- 
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+	u32 reg;
-+
-+	reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+	if (enable)
-+		reg |= mask;
-+	else
-+		reg &= ~mask;
-+	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -317,12 +329,17 @@ static struct clk clk_ipsec = {
- 
- static void pcie_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+		bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+	} else if (BCMCPU_IS_6328()) {
- 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--	else if (BCMCPU_IS_6362())
-+	} else if (BCMCPU_IS_6362()) {
- 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--	else if (BCMCPU_IS_63268())
-+	} else if (BCMCPU_IS_63268()) {
- 		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+	}
- }
- 
- static struct clk clk_pcie = {
-@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev,
- 	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
- 	    !strcmp(id, "ipsec"))
- 		return &clk_ipsec;
--	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+	if ((BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
- 	    !strcmp(id, "pcie"))
- 		return &clk_pcie;
- 	return ERR_PTR(-ENOENT);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,6 +40,12 @@
- #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
- 					BCM_CB_MEM_SIZE - 1)
- 
-+#define BCM_PCIE_MEM_BASE_PA_6318	0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318		(1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318	(BCM_PCIE_MEM_BASE_PA_6318 +	\
-+					BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1543,6 +1543,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
- 
-+#define PCIE_SPECIFIC_REG		0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT	0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT	2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT	4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN	0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN	2
-+
- #define PCIE_CONFIG2_REG		0x408
- #define CONFIG2_BAR1_SIZE_EN		1
- #define CONFIG2_BAR1_SIZE_MASK		0xf
-@@ -1588,7 +1599,54 @@
- #define PCIE_RC_INT_C			(1 << 2)
- #define PCIE_RC_INT_D			(1 << 3)
- 
--#define PCIE_DEVICE_OFFSET		0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG	0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK	0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP	0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT	20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK	(0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG	0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB	0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT	20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK	(0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT	20
-+#define C2P_BASELIMIT_LIMIT_MASK	(0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT	4
-+#define C2P_BASELIMIT_BASE_MASK		(0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG	0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT	20
-+#define BAR1_CFG_REMAP_OFFSET_MASK	(0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN	1
-+
-+#define PCIE_HARD_DEBUG_REG		0x4204
-+#define HARD_DEBUG_SERDES_IDDQ		(1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG	0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU	(1 << 0)
-+#define CPU_INT_PCIE_INTA		(1 << 1)
-+#define CPU_INT_PCIE_INTB		(1 << 2)
-+#define CPU_INT_PCIE_INTC		(1 << 3)
-+#define CPU_INT_PCIE_INTD		(1 << 4)
-+#define CPU_INT_PCIE_INTR		(1 << 5)
-+#define CPU_INT_PCIE_NMI		(1 << 6)
-+#define CPU_INT_PCIE_UBUS		(1 << 7)
-+#define CPU_INT_IPI			(1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG		0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT		12
-+#define EXT_CFG_FUNC_NUM_MASK		(0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT		15
-+#define EXT_CFG_DEV_NUM_MASK		(0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT		20
-+#define EXT_CFG_BUS_NUM_MASK		(0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318		0x9000
-+#define PCIE_DEVICE_OFFSET_6328		0x8000
- 
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
- 	if (!bcm63xx_pcie_can_access(bus, devfn))
- 		return PCIBIOS_DEVICE_NOT_FOUND;
- 
--	if (bus->number == PCIE_BUS_DEVICE)
--		reg += PCIE_DEVICE_OFFSET;
-+	if (bus->number == PCIE_BUS_DEVICE) {
-+		if (BCMCPU_IS_6318())
-+			reg += PCIE_DEVICE_OFFSET_6318;
-+		else
-+			reg += PCIE_DEVICE_OFFSET_6328;
-+	}
- 
- 	data = bcm_pcie_readl(reg);
- 
-@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
- 	if (!bcm63xx_pcie_can_access(bus, devfn))
- 		return PCIBIOS_DEVICE_NOT_FOUND;
- 
--	if (bus->number == PCIE_BUS_DEVICE)
--		reg += PCIE_DEVICE_OFFSET;
-+	if (bus->number == PCIE_BUS_DEVICE) {
-+		if (BCMCPU_IS_6318())
-+			reg += PCIE_DEVICE_OFFSET_6318;
-+		else
-+			reg += PCIE_DEVICE_OFFSET_6328;
-+	}
- 
- 
- 	data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- 
- void __iomem *pci_iospace_start;
- 
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
- 	u32 val;
- 	u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
- 	mdelay(200);
- }
- 
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
- 	u32 val;
- 
--	/* enable clock */
--	pcie_clk = clk_get(NULL, "pcie");
--	if (IS_ERR_OR_NULL(pcie_clk))
--		return -ENODEV;
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
- 
--	clk_prepare_enable(pcie_clk);
-+	/* reset the PCIe core */
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+	mdelay(10);
-+	val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+	val &= ~HARD_DEBUG_SERDES_IDDQ;
-+	bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+	mdelay(10);
-+	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+	mdelay(200);
-+}
- 
--	bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+	u32 val;
- 
- 	/* configure the PCIe bridge */
- 	val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
- 	val |= OPT2_CFG_TYPE1_BD_SEL;
- 	bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
- 
-+	/* set bar0 to little endian */
-+	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+	val |= BASEMASK_REMAP_EN;
-+	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+	u32 val;
-+
-+	bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+			CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+			PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+	val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+	val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+	       C2P_BASELIMIT_BASE_SHIFT;
-+
-+	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+	/* set bar0 to little endian */
-+	val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+	val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+	val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+	bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+	bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+	bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+	bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+			PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+	u32 val;
-+
-+	/* enable clock */
-+	pcie_clk = clk_get(NULL, "pcie");
-+	if (IS_ERR_OR_NULL(pcie_clk))
-+		return -ENODEV;
-+
-+	clk_prepare_enable(pcie_clk);
-+
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+		bcm63xx_reset_pcie_gen1();
-+		bcm63xx_init_pcie_gen1();
-+	} else {
-+		bcm63xx_reset_pcie_gen2();
-+		bcm63xx_init_pcie_gen2();
-+	}
-+
- 	/* setup class code as bridge */
- 	val = bcm_pcie_readl(PCIE_IDVAL3_REG);
- 	val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
- 	val &= ~CONFIG2_BAR1_SIZE_MASK;
- 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
- 
--	/* set bar0 to little endian */
--	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--	val |= BASEMASK_REMAP_EN;
--	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
- 	register_pci_controller(&bcm63xx_pcie_controller);
- 
- 	return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
- 	if (!bcm63xx_pci_enabled)
- 		return -ENODEV;
- 
--	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+	if (BCMCPU_IS_6318()) {
-+		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+	} if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
- 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
- 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
- 	} else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
- 	}
- 
- 	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6318_CPU_ID:
- 	case BCM6328_CPU_ID:
- 	case BCM6362_CPU_ID:
- 	case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644
index a91a29b16c..0000000000
--- a/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- 
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
- 	{
- 		.name		= "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
- 	}
- }
- 
-+void __init bcm63xx_flash_detect(void)
-+{
-+	flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--	int flash_type;
- 	u32 val;
- 
--	flash_type = bcm63xx_detect_flash_type();
--
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
- 		/* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -18,6 +18,7 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_flash.h>
- 
- void __init prom_init(void)
- {
-@@ -56,6 +57,9 @@ void __init prom_init(void)
- 	/* register gpiochip */
- 	bcm63xx_gpio_init();
- 
-+	/* detect and setup flash access */
-+	bcm63xx_flash_detect();
-+
- 	/* do low level board init */
- 	board_prom_init();
- 
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -7,6 +7,8 @@ enum {
- 	BCM63XX_FLASH_TYPE_NAND,
- };
- 
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- 
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644
index 2b19600776..0000000000
--- a/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
- 	}
- }
- 
-+#define HSSPI_FLASH_CTRL_REG		0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK	0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK	(0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2		(0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3		(1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4		(2 << 8)
-+#define FLASH_CTRL_MB_EN		(1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
- 	flash_type = bcm63xx_detect_flash_type();
-+
-+	/* reduce flash mapping to single i/o reads for safety */
-+	if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+	    (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+	     BCMCPU_IS_63268())) {
-+		u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+		if (!(val & FLASH_CTRL_MB_EN))
-+			return;
-+
-+		val &= ~FLASH_CTRL_MB_EN;
-+		val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+
-+		switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+		case FLASH_CTRL_ADDR_BYTES_3:
-+			val |= 0x0b; /* OPCODE_FAST_READ */
-+			break;
-+		case FLASH_CTRL_ADDR_BYTES_4:
-+			val |= 0x0c; /* OPCODE_FAST_READ_4B */
-+			break;
-+		case FLASH_CTRL_ADDR_BYTES_2:
-+		default:
-+			pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+				val & FLASH_CTRL_ADDR_BYTES_MASK);
-+			return;
-+		}
-+
-+		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+	}
- }
- 
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644
index 384702c80f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+				CKCTL_6318_ROBOSW025_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+	} else if (BCMCPU_IS_6328())
- 		bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
- 	else if (BCMCPU_IS_6362())
- 		bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--	if (BCMCPU_IS_6328())
-+	if (BCMCPU_IS_6318()) {
-+		bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+		bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+	} else if (BCMCPU_IS_6328()) {
- 		bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--	else if (BCMCPU_IS_6348())
-+	} else if (BCMCPU_IS_6348()) {
- 		bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--	else if (BCMCPU_IS_6362())
-+	} else if (BCMCPU_IS_6362()) {
- 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--	else if (BCMCPU_IS_6368())
-+	} else if (BCMCPU_IS_6368()) {
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--	else if (BCMCPU_IS_63268())
-+	} else if (BCMCPU_IS_63268()) {
- 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--	else
-+	} else {
- 		return;
-+	}
- 
- 	if (enable)
- 		msleep(100);
-@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev,
- 		return &clk_enetsw;
- 	if (!strcmp(id, "ephy"))
- 		return &clk_ephy;
--	if (!strcmp(id, "usbh"))
-+	if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
- 		return &clk_usbh;
--	if (!strcmp(id, "usbd"))
-+	if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
- 		return &clk_usbd;
- 	if (!strcmp(id, "spi"))
- 		return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644
index 904d0b7ab0..0000000000
--- a/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_6318()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
- 	}
- 
- 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_6318()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
- 	}
- 
- 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -681,6 +681,12 @@
- #define GPIO_MODE_6368_SPI_SSN4		(1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5		(1 << 31)
- 
-+#define GPIO_PINMUX_SEL0_6318		0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT	26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK	(0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON	(1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED	(2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO	(3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- 
- #define GPIO_PINMUX_OTHR_REG		0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -999,6 +1005,7 @@
- 
- #define USBH_PRIV_SWAP_6358_REG		0x0
- #define USBH_PRIV_SWAP_6368_REG		0x1c
-+#define USBH_PRIV_SWAP_6318_REG		0x0c
- 
- #define USBH_PRIV_SWAP_USBD_SHIFT	6
- #define USBH_PRIV_SWAP_USBD_MASK	(1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1024,6 +1031,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT	4
- #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
- 
-+#define USBH_PRIV_SETUP_6318_REG	0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG	0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
-+
- 
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -129,6 +129,15 @@ void __init board_early_setup(const stru
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+	if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+		val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+		val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+		val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+		bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+	}
-+#endif
- }
- 
- 
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -22,6 +22,8 @@ config BCM63XX_CPU_6318
- 	bool "support 6318 CPU"
- 	select SYS_HAS_CPU_BMIPS32_3300
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- 
- config BCM63XX_CPU_6328
- 	bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644
index c758163956..0000000000
--- a/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -586,6 +586,9 @@
- #define TIMER_CTL_MONOTONIC_MASK	(1 << 30)
- #define TIMER_CTL_ENABLE_MASK		(1 << 31)
- 
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG		0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN	(1 << 18)
- 
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1547,6 +1550,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT	21
- #define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
- 
-+#define MISC_IDDQ_CTRL_6328_REG		0x48
-+#define MISC_IDDQ_CTRL_63268_REG	0x4c
-+
-+#define IDDQ_CTRL_63268_USBH		(1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG		0x240
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -62,6 +62,26 @@ static void bcm_ub_hwclock_set(u32 mask,
- 	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
- 
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+	u32 offset;
-+	u32 reg;
-+
-+	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+		offset = MISC_IDDQ_CTRL_6328_REG;
-+	else if (BCMCPU_IS_63268())
-+		offset = MISC_IDDQ_CTRL_63268_REG;
-+	else
-+		return;
-+
-+	reg = bcm_misc_readl(offset);
-+	if (enable)
-+		reg &= ~mask;
-+	else
-+		reg |= mask;
-+	bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -199,7 +219,17 @@ static void usbh_set(struct clk *clk, in
- 	} else if (BCMCPU_IS_6368()) {
- 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- 	} else if (BCMCPU_IS_63268()) {
-+		u32 reg;
-+
- 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+		bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+		bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+		reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+		if (enable)
-+			reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+		else
-+			reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+		bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
- 	} else {
- 		return;
- 	}
diff --git a/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644
index 0b709915a7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1033,11 +1033,18 @@
- #define USBH_PRIV_SETUP_6368_REG	0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT	4
- #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT	5
-+#define USBH_PRIV_SETUP_IPP_MASK	(1 << USBH_PRIV_SETUP_IPP_SHIFT)
- 
- #define USBH_PRIV_SETUP_6318_REG	0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG	0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN	(1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN	(1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN	(1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY	(1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG	0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
- 
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -72,6 +72,8 @@ config BCM63XX_CPU_63268
- 	bool "support 63268 CPU"
- 	select SYS_HAS_CPU_BMIPS4350
- 	select HW_HAS_PCI
-+	select BCM63XX_OHCI
-+	select BCM63XX_EHCI
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
- 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return 0;
- 
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_63268()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
- 	} else if (BCMCPU_IS_6318()) {
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
- 		reg |= USBH_PRIV_SETUP_IOC_MASK;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+	} else if (BCMCPU_IS_63268()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+		reg |= USBH_PRIV_SETUP_IOC_MASK;
-+		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
- 	} else if (BCMCPU_IS_6318()) {
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
- 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
- 
- 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644
index 41747da2d9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -42,6 +42,7 @@ struct board_info {
- 
- 	/* USB config */
- 	struct bcm63xx_usbd_platform_data usbd;
-+	unsigned int num_usbh_ports:2;
- 
- 	/* DSP config */
- 	struct bcm63xx_dsp_platform_data dsp;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
- 
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- 
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
- 
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- 
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -181,6 +181,7 @@ int __init board_register_devices(void)
- {
- 	int button_count = 0;
- 	int led_count = 0;
-+	int usbh_ports = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -203,14 +204,21 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enetsw.mac_addr))
- 		bcm63xx_enetsw_register(&board.enetsw);
- 
-+	if ((board.has_ohci0 || board.has_ehci0)) {
-+		usbh_ports = board.num_usbh_ports;
-+
-+		if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+			usbh_ports = 1;
-+	}
-+
- 	if (board.has_usbd)
- 		bcm63xx_usbd_register(&board.usbd);
- 
- 	if (board.has_ehci0)
--		bcm63xx_ehci_register();
-+		bcm63xx_ehci_register(usbh_ports);
- 
- 	if (board.has_ohci0)
--		bcm63xx_ohci_register();
-+		bcm63xx_ohci_register(usbh_ports);
- 
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
- 	},
- };
- 
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
- 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
- 		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
- 		return 0;
- 
-+	bcm63xx_ehci_pdata.num_ports = num_ports;	
-+
- 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
- 	ehci_resources[0].end = ehci_resources[0].start;
- 	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
- 	.big_endian_desc	= 1,
- 	.big_endian_mmio	= 1,
- 	.no_big_frame_no	= 1,
--	.num_ports		= 1,
- 	.power_on		= bcm63xx_ohci_power_on,
- 	.power_off		= bcm63xx_ohci_power_off,
- 	.power_suspend		= bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
- 	},
- };
- 
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
- 	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
- 		return -ENODEV;
- 
-+	bcm63xx_ohci_pdata.num_ports = num_ports;
-+
- 	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
- 	ohci_resources[0].end = ohci_resources[0].start;
- 	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
deleted file mode 100644
index 285aa40acf..0000000000
--- a/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -596,6 +596,7 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
-+	.num_usbh_ports			= 2,
- 
- 	.leds = {
- 		{
diff --git a/target/linux/brcm63xx/patches-3.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/brcm63xx/patches-3.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644
index c60f939d6f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,11 +1,10 @@
--choice
--	prompt "Board support"
-+menu "Board support"
- 	depends on BCM63XX
--	default BOARD_BCM963XX
- 
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
- 	select SSB
-+	default y
-        help
- 
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -706,7 +706,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
- 	unsigned int i;
- 	u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -15,6 +15,8 @@
- #include <linux/gpio_keys.h>
- #include <linux/spi/spi.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -32,6 +34,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- 
-+#include "board_common.h"
-+
- #define PFX	"board: "
- 
- #define BCM963XX_KEYS_POLL_INTERVAL	20
-@@ -84,6 +88,15 @@ const char *board_get_name(void)
- 	return board.name;
- }
- 
-+void __init board_prom_init(void)
-+{
-+	/* detect bootloader */
-+	if (fw_arg3 == CFE_EPTSEAL)
-+		board_bcm963xx_init();
-+	else
-+		panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- 
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
- 		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-3.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/brcm63xx/patches-3.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644
index 7e408f69fb..0000000000
--- a/target/linux/brcm63xx/patches-3.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -57,6 +57,12 @@ static struct platform_device mtd_dev =
- 	},
- };
- 
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+	mtd_resources[0].start = start;
-+	mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
- 	u32 val;
-@@ -158,12 +164,15 @@ int __init bcm63xx_flash_register(void)
- 
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
--		/* read base address of boot chip select (0) */
--		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--		val &= MPI_CSBASE_BASE_MASK;
- 
--		mtd_resources[0].start = val;
--		mtd_resources[0].end = 0x1FFFFFFF;
-+		if (!mtd_resources[0].start) {
-+			/* read base address of boot chip select (0) */
-+			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+			val &= MPI_CSBASE_BASE_MASK;
-+
-+			mtd_resources[0].start = val;
-+			mtd_resources[0].end = 0x1FFFFFFF;
-+		}
- 
- 		return platform_device_register(&mtd_dev);
- 	case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -9,6 +9,8 @@ enum {
- 
- void bcm63xx_flash_detect(void);
- 
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- 
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/brcm63xx/patches-3.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644
index 450bc1d7d4..0000000000
--- a/target/linux/brcm63xx/patches-3.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
- 		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--		   usb-common.o
-+		   usb-common.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -43,44 +43,6 @@
- static struct board_info board;
- 
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--	.revision		= 0x02,
--	.board_rev		= 0x17,
--	.country_code		= 0x0,
--	.ant_available_bg	= 0x3,
--	.pa0b0			= 0x15ae,
--	.pa0b1			= 0xfa85,
--	.pa0b2			= 0xfe8d,
--	.pa1b0			= 0xffff,
--	.pa1b1			= 0xffff,
--	.pa1b2			= 0xffff,
--	.gpio0			= 0xff,
--	.gpio1			= 0xff,
--	.gpio2			= 0xff,
--	.gpio3			= 0xff,
--	.maxpwr_bg		= 0x004c,
--	.itssi_bg		= 0x00,
--	.boardflags_lo		= 0x2848,
--	.boardflags_hi		= 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--		return 0;
--	} else {
--		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--		return -EINVAL;
--	}
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -195,6 +157,7 @@ int __init board_register_devices(void)
- 	int button_count = 0;
- 	int led_count = 0;
- 	int usbh_ports = 0;
-+	u8 mac[ETH_ALEN];
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -239,15 +202,10 @@ int __init board_register_devices(void)
- 	/* Generate MAC address for WLAN and register our SPROM,
- 	 * do this after registering enet devices
- 	 */
--#ifdef CONFIG_SSB_PCIHOST
--	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--		if (ssb_arch_register_fallback_sprom(
--				&bcm63xx_get_fallback_sprom) < 0)
--			pr_err(PFX "failed to register fallback SPROM\n");
--	}
--#endif
-+
-+	if (board_get_mac_address(mac) ||
-+	    bcm63xx_register_fallback_sprom(mac))
-+		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
- 
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+	.revision		= 0x02,
-+	.board_rev		= 0x17,
-+	.country_code		= 0x0,
-+	.ant_available_bg	= 0x3,
-+	.pa0b0			= 0x15ae,
-+	.pa0b1			= 0xfa85,
-+	.pa0b2			= 0xfe8d,
-+	.pa1b0			= 0xffff,
-+	.pa1b1			= 0xffff,
-+	.pa1b2			= 0xffff,
-+	.gpio0			= 0xff,
-+	.gpio1			= 0xff,
-+	.gpio2			= 0xff,
-+	.gpio3			= 0xff,
-+	.maxpwr_bg		= 0x004c,
-+	.itssi_bg		= 0x00,
-+	.boardflags_lo		= 0x2848,
-+	.boardflags_hi		= 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->bustype == SSB_BUSTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
-+
-+int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+{
-+	int ret = 0;
-+
-+#ifdef CONFIG_SSB_PCIHOST
-+	memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+
-+	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#endif
-+	return ret;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FALLBACK_SPROM
-+#define __BCM63XX_FALLBACK_SPROM
-+
-+int bcm63xx_register_fallback_sprom(u8 *mac);
-+
-+#endif
diff --git a/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644
index bc35c25165..0000000000
--- a/target/linux/brcm63xx/patches-3.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
- arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -157,7 +157,6 @@ int __init board_register_devices(void)
- 	int button_count = 0;
- 	int led_count = 0;
- 	int usbh_ports = 0;
--	u8 mac[ETH_ALEN];
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -203,8 +202,8 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- 
--	if (board_get_mac_address(mac) ||
--	    bcm63xx_register_fallback_sprom(mac))
-+	if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+	    bcm63xx_register_fallback_sprom(&board.fallback_sprom))
- 		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
- 
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
--	memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
- 
- 	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
- 
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+	u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
- 
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_fallback_sprom.h>
- 
- /*
-  * flash mapping
-@@ -59,6 +60,9 @@ struct board_info {
- 	/* External PHY reset GPIO flags from gpio.h */
- 	unsigned long ephy_reset_gpio_flags;
- 
-+	/* fallback sprom config */
-+	struct fallback_sprom_data fallback_sprom;
-+
- 	/* Additional platform devices */
- 	struct platform_device **devs;
- 	unsigned int	num_devs;
diff --git a/target/linux/brcm63xx/patches-3.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/brcm63xx/patches-3.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
deleted file mode 100644
index d7250d5732..0000000000
--- a/target/linux/brcm63xx/patches-3.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:52:56 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
-
-Some devices do not provide enough mac addresses to populate wifi in
-addition to ethernet.
-
-Use having pci enabled as a rough heuristic which boards should have it
-enabled.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
- arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -74,6 +74,7 @@ static struct board_info __initdata boar
- 	.has_uart0			= 1,
- 	.has_pci			= 1,
- 	.has_usbd			= 0,
-+	.use_fallback_sprom		= 1,
- 
- 	.usbd = {
- 		.use_fullspeed		= 0,
-@@ -223,6 +224,7 @@ static struct board_info __initdata boar
- 	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -268,6 +270,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -328,6 +331,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -382,6 +386,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -440,6 +445,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -463,6 +469,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -481,6 +488,7 @@ static struct board_info __initdata boar
- 
- 	.has_uart0			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 	.has_ohci0			= 1,
- 
- 	.has_enet0			= 1,
-@@ -503,6 +511,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -529,6 +538,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -581,6 +591,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
-@@ -652,6 +663,7 @@ static struct board_info __initdata boar
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
- 
- 	.enet0 = {
- 		.has_phy		= 1,
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -202,8 +202,9 @@ int __init board_register_devices(void)
- 	 * do this after registering enet devices
- 	 */
- 
--	if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
--	    bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-+	if (board.use_fallback_sprom &&
-+	    (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+	     bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
- 		pr_err(PFX "failed to register fallback SPROM\n");
- 
- 	bcm63xx_spi_register();
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -35,6 +35,7 @@ struct board_info {
- 	unsigned int	has_dsp:1;
- 	unsigned int	has_uart0:1;
- 	unsigned int	has_uart1:1;
-+	unsigned int	use_fallback_sprom:1;
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/brcm63xx/patches-3.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
deleted file mode 100644
index 0c4a9be47d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:58:38 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
-
-Different chips require different sprom contents, so prepare for
-supplying the appropriate sprom type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -22,7 +22,7 @@
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+static __initconst struct ssb_sprom bcm63xx_default_sprom = {
- 	.revision		= 0x02,
- 	.board_rev		= 0x17,
- 	.country_code		= 0x0,
-@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
- 	.boardflags_hi		= 0x0000,
- };
- 
-+static struct ssb_sprom bcm63xx_sprom;
-+
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
-@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
-+	switch (data->type) {
-+	case SPROM_DEFAULT:
-+		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-+		       sizeof(bcm63xx_sprom));
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -3,8 +3,13 @@
- 
- #include <linux/if_ether.h>
- 
-+enum sprom_type {
-+	SPROM_DEFAULT, /* default fallback sprom */
-+};
-+
- struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
-+	enum sprom_type type;
- };
- 
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-3.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/brcm63xx/patches-3.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
deleted file mode 100644
index 42502eb062..0000000000
--- a/target/linux/brcm63xx/patches-3.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
+++ /dev/null
@@ -1,517 +0,0 @@
-From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:16:36 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
-
-Allow using raw sprom content as templates.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 482 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
- 		return -EINVAL;
- 	}
- }
-+
-+/* FIXME: use lib_sprom after submission upstream */
-+
-+/* Get the word-offset for a SSB_SPROM_XXX define. */
-+#define SPOFF(offset)	((offset) / sizeof(u16))
-+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-+#define SPEX16(_outvar, _offset, _mask, _shift)	\
-+	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift)	\
-+	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+	SPEX16(_outvar, _offset, _mask, _shift)
-+
-+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)	\
-+	do {	\
-+		SPEX(_field[0], _offset +  0, _mask, _shift);	\
-+		SPEX(_field[1], _offset +  2, _mask, _shift);	\
-+		SPEX(_field[2], _offset +  4, _mask, _shift);	\
-+		SPEX(_field[3], _offset +  6, _mask, _shift);	\
-+		SPEX(_field[4], _offset +  8, _mask, _shift);	\
-+		SPEX(_field[5], _offset + 10, _mask, _shift);	\
-+		SPEX(_field[6], _offset + 12, _mask, _shift);	\
-+		SPEX(_field[7], _offset + 14, _mask, _shift);	\
-+	} while (0)
-+
-+
-+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
-+			       u16 mask, u16 shift)
-+{
-+	u16 v;
-+	u8 gain;
-+
-+	v = in[SPOFF(SSB_SPROM1_AGAIN)];
-+	gain = (v & mask) >> shift;
-+	if (gain == 0xFF)
-+		gain = 2; /* If unset use 2dBm */
-+	if (sprom_revision == 1) {
-+		/* Convert to Q5.2 */
-+		gain <<= 2;
-+	} else {
-+		/* Q5.2 Fractional part is stored in 0xC0 */
-+		gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
-+	}
-+
-+	return (s8)gain;
-+}
-+
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+	     SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
-+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
-+{
-+	u16 loc[3];
-+
-+	if (out->revision == 3)			/* rev 3 moved MAC */
-+		loc[0] = SSB_SPROM3_IL0MAC;
-+	else {
-+		loc[0] = SSB_SPROM1_IL0MAC;
-+		loc[1] = SSB_SPROM1_ET0MAC;
-+		loc[2] = SSB_SPROM1_ET1MAC;
-+	}
-+
-+	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
-+	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-+	     SSB_SPROM1_ETHPHY_ET1A_SHIFT);
-+	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
-+	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
-+	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	if (out->revision == 1)
-+		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-+		     SSB_SPROM1_BINF_CCODE_SHIFT);
-+	SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
-+	     SSB_SPROM1_BINF_ANTA_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-+	     SSB_SPROM1_BINF_ANTBG_SHIFT);
-+	SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
-+	SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
-+	SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
-+	SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
-+	SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
-+	SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
-+	SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
-+	SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
-+	     SSB_SPROM1_GPIOA_P1_SHIFT);
-+	SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
-+	SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
-+	     SSB_SPROM1_GPIOB_P3_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
-+	     SSB_SPROM1_MAXPWR_A_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
-+	SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
-+	     SSB_SPROM1_ITSSI_A_SHIFT);
-+	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
-+	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-+
-+	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
-+	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-+
-+	/* Extract the antenna gain values. */
-+	out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
-+						    SSB_SPROM1_AGAIN_BG,
-+						    SSB_SPROM1_AGAIN_BG_SHIFT);
-+	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
-+						    SSB_SPROM1_AGAIN_A,
-+						    SSB_SPROM1_AGAIN_A_SHIFT);
-+	if (out->revision >= 2)
-+		sprom_extract_r23(out, in);
-+}
-+
-+/* Revs 4 5 and 8 have partially shared layout */
-+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
-+{
-+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
-+	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
-+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
-+	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
-+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
-+	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
-+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
-+	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
-+
-+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
-+	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
-+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
-+	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
-+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
-+	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
-+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
-+	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
-+
-+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
-+	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
-+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
-+	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
-+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
-+	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
-+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
-+	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
-+
-+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
-+	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
-+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
-+	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
-+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
-+	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
-+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
-+	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
-+{
-+	u16 il0mac_offset;
-+
-+	if (out->revision == 4)
-+		il0mac_offset = SSB_SPROM4_IL0MAC;
-+	else
-+		il0mac_offset = SSB_SPROM5_IL0MAC;
-+
-+	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
-+	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
-+	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-+	SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	if (out->revision == 4) {
-+		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
-+		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-+		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
-+		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
-+	} else {
-+		SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
-+		SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
-+		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-+		SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
-+	}
-+	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
-+	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-+	     SSB_SPROM4_ANTAVAIL_BG_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
-+	SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
-+	     SSB_SPROM4_ITSSI_BG_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
-+	SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
-+	     SSB_SPROM4_ITSSI_A_SHIFT);
-+	if (out->revision == 4) {
-+		SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+		SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+		     SSB_SPROM4_GPIOA_P1_SHIFT);
-+		SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+		SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+		     SSB_SPROM4_GPIOB_P3_SHIFT);
-+	} else {
-+		SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+		SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+		     SSB_SPROM5_GPIOA_P1_SHIFT);
-+		SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+		SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+		     SSB_SPROM5_GPIOB_P3_SHIFT);
-+	}
-+
-+	/* Extract the antenna gain values. */
-+	SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
-+	     SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
-+	SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
-+	     SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
-+	SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
-+	     SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
-+	SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
-+	     SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
-+
-+	sprom_extract_r458(out, in);
-+
-+	/* TODO - get remaining rev 4 stuff needed */
-+}
-+
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+	int i;
-+	u16 o;
-+	u16 pwr_info_offset[] = {
-+		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
-+		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-+	};
-+	BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+			ARRAY_SIZE(out->core_pwr_info));
-+
-+	SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+	SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
-+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
-+	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+	     SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+	SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+	SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+	     SSB_SPROM8_ITSSI_BG_SHIFT);
-+	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+	     SSB_SPROM8_ITSSI_A_SHIFT);
-+	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+	     SSB_SPROM8_MAXP_AL_SHIFT);
-+	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+	     SSB_SPROM8_GPIOA_P1_SHIFT);
-+	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+	     SSB_SPROM8_GPIOB_P3_SHIFT);
-+	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+	     SSB_SPROM8_TRI5G_SHIFT);
-+	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+	     SSB_SPROM8_TRI5GH_SHIFT);
-+	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+	     SSB_SPROM8_RXPO5G_SHIFT);
-+	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+	     SSB_SPROM8_RSSISMC2G_SHIFT);
-+	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+	     SSB_SPROM8_RSSISAV2G_SHIFT);
-+	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+	     SSB_SPROM8_BXA2G_SHIFT);
-+	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+	     SSB_SPROM8_RSSISMC5G_SHIFT);
-+	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+	     SSB_SPROM8_RSSISAV5G_SHIFT);
-+	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+	     SSB_SPROM8_BXA5G_SHIFT);
-+	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+	/* Extract the antenna gain values. */
-+	SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
-+	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
-+	SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
-+	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
-+	SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
-+	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
-+	SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
-+	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
-+
-+	/* Extract cores power info info */
-+	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+		o = pwr_info_offset[i];
-+		SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+			SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+			SSB_SPROM8_2G_MAXP, 0);
-+
-+		SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
-+
-+		SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+			SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
-+		SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+			SSB_SPROM8_5G_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
-+			SSB_SPROM8_5GH_MAXP, 0);
-+		SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
-+			SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
-+
-+		SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
-+		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
-+	}
-+
-+	/* Extract FEM info */
-+	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+	SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+	SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+	SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
-+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+	SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+	SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+	SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+	SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
-+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+	SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
-+	     SSB_SPROM8_LEDDC_ON_SHIFT);
-+	SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
-+	     SSB_SPROM8_LEDDC_OFF_SHIFT);
-+
-+	SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
-+	     SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
-+	SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
-+	     SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
-+	SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
-+	     SSB_SPROM8_TXRXC_SWITCH_SHIFT);
-+
-+	SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
-+
-+	SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
-+	SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
-+
-+	SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
-+	     SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
-+	SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
-+	     SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
-+	SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
-+	SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
-+	SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
-+	     SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
-+	SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
-+	     SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
-+	SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
-+	     SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
-+	SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
-+	     SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
-+
-+	SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
-+	SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
-+	SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
-+	SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
-+
-+	SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
-+	     SSB_SPROM8_THERMAL_TRESH_SHIFT);
-+	SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
-+	     SSB_SPROM8_THERMAL_OFFSET_SHIFT);
-+	SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
-+	     SSB_SPROM8_TEMPDELTA_PHYCAL,
-+	     SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
-+	SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
-+	     SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
-+	SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
-+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS,
-+	     SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
-+	sprom_extract_r458(out, in);
-+
-+	/* TODO - get remaining rev 8 stuff needed */
-+}
-+
-+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
-+{
-+	memset(out, 0, sizeof(*out));
-+
-+	out->revision = in[size - 1] & 0x00FF;
-+	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
-+	memset(out->et1mac, 0xFF, 6);
-+
-+	switch (out->revision) {
-+	case 1:
-+	case 2:
-+	case 3:
-+		sprom_extract_r123(out, in);
-+		break;
-+	case 4:
-+	case 5:
-+		sprom_extract_r45(out, in);
-+		break;
-+	case 8:
-+		sprom_extract_r8(out, in);
-+		break;
-+	default:
-+		pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+			 out->revision);
-+		out->revision = 1;
-+		sprom_extract_r123(out, in);
-+	}
-+
-+	if (out->boardflags_lo == 0xFFFF)
-+		out->boardflags_lo = 0;  /* per specs */
-+	if (out->boardflags_hi == 0xFFFF)
-+		out->boardflags_hi = 0;  /* per specs */
-+
-+	return 0;
-+}
-+
-+static __initdata u16 template_sprom[220];
- #endif
- 
-+
- int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
- 	int ret = 0;
- 
- #ifdef CONFIG_SSB_PCIHOST
-+	u16 size = 0;
-+
- 	switch (data->type) {
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
- 		return -EINVAL;
- 	}
- 
-+	if (size > 0)
-+		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/brcm63xx/patches-3.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/brcm63xx/patches-3.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
deleted file mode 100644
index 65c00b5197..0000000000
--- a/target/linux/brcm63xx/patches-3.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:33:38 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
- ssb cards
-
-Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
- 2 files changed, 142 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
- 	.boardflags_hi		= 0x0000,
- };
- 
-+
-+static __initconst u16 bcm4306_sprom[] = {
-+	0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
-+	0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
-+	0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4318_sprom[] = {
-+	0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
-+	0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
-+	0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4321_sprom[] = {
-+	0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
-+	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
-+	0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0004,
-+};
-+
-+static __initconst u16 bcm4322_sprom[] = {
-+	0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
-+	0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43222_sprom[] = {
-+	0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
-+	0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
- static struct ssb_sprom bcm63xx_sprom;
- 
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
- 	u16 size = 0;
- 
- 	switch (data->type) {
-+	case SPROM_BCM4306:
-+		memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-+		size = ARRAY_SIZE(bcm4306_sprom);
-+		break;
-+	case SPROM_BCM4318:
-+		memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
-+		size = ARRAY_SIZE(bcm4318_sprom);
-+		break;
-+	case SPROM_BCM4321:
-+		memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
-+		size = ARRAY_SIZE(bcm4321_sprom);
-+		break;
-+	case SPROM_BCM4322:
-+		memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
-+		size = ARRAY_SIZE(bcm4322_sprom);
-+		break;
-+	case SPROM_BCM43222:
-+		memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-+		size = ARRAY_SIZE(bcm43222_sprom);
-+		break;
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -5,6 +5,12 @@
- 
- enum sprom_type {
- 	SPROM_DEFAULT, /* default fallback sprom */
-+	/* SSB based */
-+	SPROM_BCM4306,
-+	SPROM_BCM4318,
-+	SPROM_BCM4321,
-+	SPROM_BCM4322,
-+	SPROM_BCM43222,
- };
- 
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-3.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/brcm63xx/patches-3.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
deleted file mode 100644
index 6475f9fa24..0000000000
--- a/target/linux/brcm63xx/patches-3.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:48:26 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
-
-Similar to SSB, register a fallback sprom handler for BCMA.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig |  1 +
- arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
- 2 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -4,6 +4,7 @@ menu "Board support"
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
- 	select SSB
-+	select BCMA
- 	default y
-        help
- 
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <board_bcm963xx.h>
- 
-@@ -21,7 +22,7 @@
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-  */
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- static __initconst struct ssb_sprom bcm63xx_default_sprom = {
- 	.revision		= 0x02,
- 	.board_rev		= 0x17,
-@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
- 	.boardflags_hi		= 0x0000,
- };
- 
--
-+#if defined (CONFIG_SSB_PCIHOST)
- static __initconst u16 bcm4306_sprom[] = {
- 	0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
- 	0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
- 	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
- 	0xffff, 0xffff, 0xffff, 0x0008,
- };
-+#endif /* CONFIG_SSB_PCIHOST */
- 
- static struct ssb_sprom bcm63xx_sprom;
- 
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+#if defined(CONFIG_SSB_PCIHOST)
-+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
- 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
- 		return -EINVAL;
- 	}
- }
-+#endif
-+
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
-+{
-+	if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
-+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		return 0;
-+	} else {
-+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+		return -EINVAL;
-+	}
-+}
-+#endif
- 
- /* FIXME: use lib_sprom after submission upstream */
- 
-@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
- {
- 	int ret = 0;
- 
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- 	u16 size = 0;
- 
- 	switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
- 	case SPROM_BCM4306:
- 		memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
- 		size = ARRAY_SIZE(bcm4306_sprom);
-@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
- 		memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
- 		size = ARRAY_SIZE(bcm43222_sprom);
- 		break;
-+#endif
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
-@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
-+
-+#if defined(CONFIG_SSB_PCIHOST)
-+	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
-+	if (ret)
-+		return ret;
-+
-+#endif
- 
--	ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+	ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
-+	if (ret)
-+		return ret;
- #endif
- 	return ret;
- }
diff --git a/target/linux/brcm63xx/patches-3.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/brcm63xx/patches-3.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
deleted file mode 100644
index 5c0abb90e3..0000000000
--- a/target/linux/brcm63xx/patches-3.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 30 Jul 2014 23:14:27 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
-
-Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
-BCM43228, and BCM4331.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
- 2 files changed, 264 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
- };
- #endif /* CONFIG_SSB_PCIHOST */
- 
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+static __initconst u16 bcm4313_sprom[] = {
-+	0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
-+	0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
-+	0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0008,
-+};
-+
-+static __initconst u16 bcm43131_sprom[] = {
-+	0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
-+	0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43217_sprom[] = {
-+	0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x7a08,
-+};
-+
-+static __initconst u16 bcm43225_sprom[] = {
-+	0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
-+	0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43227_sprom[] = {
-+	0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+	0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+	0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43228_sprom[] = {
-+	0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
-+	0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
-+	0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
-+	0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
-+	0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
-+	0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
-+	0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+	0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xf008,
-+};
-+
-+static __initconst u16 bcm4331_sprom[] = {
-+	0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+	0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+	0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+	0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
-+	0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+	0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
-+	0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
-+	0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
-+	0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
-+	0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
-+	0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+	0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+	0xffff, 0xffff, 0xffff, 0x0009,
-+};
-+
-+#endif  /* CONFIG_BCMA_HOST_PCI */
-+
- static struct ssb_sprom bcm63xx_sprom;
- 
- #if defined(CONFIG_SSB_PCIHOST)
-@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
- 		size = ARRAY_SIZE(bcm43222_sprom);
- 		break;
- #endif
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+	case SPROM_BCM4313:
-+		memcpy(&template_sprom, &bcm4313_sprom,
-+                       sizeof(bcm4313_sprom));
-+		size = ARRAY_SIZE(bcm4313_sprom);
-+		break;
-+	case SPROM_BCM43131:
-+		memcpy(&template_sprom, &bcm43131_sprom,
-+		       sizeof(bcm43131_sprom));
-+		size = ARRAY_SIZE(bcm43131_sprom);
-+		break;
-+	case SPROM_BCM43217:
-+		memcpy(&template_sprom, &bcm43217_sprom,
-+		       sizeof(bcm43217_sprom));
-+		size = ARRAY_SIZE(bcm43217_sprom);
-+		break;
-+	case SPROM_BCM43225:
-+		memcpy(&template_sprom, &bcm43225_sprom,
-+		       sizeof(bcm43225_sprom));
-+		size = ARRAY_SIZE(bcm43225_sprom);
-+		break;
-+	case SPROM_BCM43227:
-+		memcpy(&template_sprom, &bcm43227_sprom,
-+		       sizeof(bcm43227_sprom));
-+		size = ARRAY_SIZE(bcm43227_sprom);
-+		break;
-+	case SPROM_BCM43228:
-+		memcpy(&template_sprom, &bcm43228_sprom,
-+		       sizeof(bcm43228_sprom));
-+		size = ARRAY_SIZE(bcm43228_sprom);
-+		break;
-+	case SPROM_BCM4331:
-+		memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
-+		size = ARRAY_SIZE(bcm4331_sprom);
-+		break;
-+#endif
- 	case SPROM_DEFAULT:
- 		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
- 		       sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -11,6 +11,14 @@ enum sprom_type {
- 	SPROM_BCM4321,
- 	SPROM_BCM4322,
- 	SPROM_BCM43222,
-+	/* BCMA based */
-+	SPROM_BCM4313,
-+	SPROM_BCM43131,
-+	SPROM_BCM43217,
-+	SPROM_BCM43225,
-+	SPROM_BCM43227,
-+	SPROM_BCM43228,
-+	SPROM_BCM4331,
- };
- 
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-3.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/brcm63xx/patches-3.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
deleted file mode 100644
index 74c2846d5f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 19:12:33 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
- fixups
-
-Allow board_info files to supply fixups for the base sproms to adapt
-them to the actual used sprom contents in case they do not use the
-default ones.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
- .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
- 	return 0;
- }
- 
-+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < n; i++)
-+		sprom[fixups[i].offset] = fixups[i].value;
-+}
-+
- static __initdata u16 template_sprom[220];
- #endif
- 
-@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
- 		return -EINVAL;
- 	}
- 
--	if (size > 0)
-+	if (size > 0) {
-+		sprom_apply_fixups(template_sprom, data->board_fixups,
-+				   data->num_board_fixups);
-+
- 		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+	}
- 
- 	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
- 	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -21,9 +21,17 @@ enum sprom_type {
- 	SPROM_BCM4331,
- };
- 
-+struct sprom_fixup {
-+	u16 offset;
-+	u16 value;
-+};
-+
- struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
- 	enum sprom_type type;
-+
-+	struct sprom_fixup *board_fixups;
-+	unsigned int num_board_fixups;
- };
- 
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-3.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/brcm63xx/patches-3.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
deleted file mode 100644
index 40591e5f2e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 20:39:44 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
- fallback sprom
-
-Warn if the set pci bus/slot does not match the actual request.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
- 
- #endif  /* CONFIG_BCMA_HOST_PCI */
- 
--static struct ssb_sprom bcm63xx_sprom;
-+struct fallback_sprom_match {
-+	u8 pci_bus;
-+	u8 pci_dev;
-+	struct ssb_sprom sprom;
-+};
-+
-+static struct fallback_sprom_match fallback_sprom;
- 
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->bustype == SSB_BUSTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+		    PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+			pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+				bus->host_pci->bus->number,
-+				PCI_SLOT(bus->host_pci->devfn));
-+		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
- 		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
- {
- 	if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
--		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+		if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+		    PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+			pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+				fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+				bus->host_pci->bus->number,
-+				PCI_SLOT(bus->host_pci->devfn));
-+		memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
- 		return 0;
- 	} else {
- 		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
- 		break;
- #endif
- 	case SPROM_DEFAULT:
--		memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
--		       sizeof(bcm63xx_sprom));
-+		memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
-+		       sizeof(bcm63xx_default_sprom));
- 		break;
- 	default:
- 		return -EINVAL;
-@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
- 		sprom_apply_fixups(template_sprom, data->board_fixups,
- 				   data->num_board_fixups);
- 
--		sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+		sprom_extract(&fallback_sprom.sprom, template_sprom, size);
- 	}
- 
--	memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
--	memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
-+	memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
-+
-+	fallback_sprom.pci_bus = data->pci_bus;
-+	fallback_sprom.pci_dev = data->pci_dev;
- #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
- 
- #if defined(CONFIG_SSB_PCIHOST)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -30,6 +30,9 @@ struct fallback_sprom_data {
- 	u8 mac_addr[ETH_ALEN];
- 	enum sprom_type type;
- 
-+	u8 pci_bus;
-+	u8 pci_dev;
-+
- 	struct sprom_fixup *board_fixups;
- 	unsigned int num_board_fixups;
- };
diff --git a/target/linux/brcm63xx/patches-3.14/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch b/target/linux/brcm63xx/patches-3.14/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch
deleted file mode 100644
index 900116ff45..0000000000
--- a/target/linux/brcm63xx/patches-3.14/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From 318c1fce4aeef298cbb6153416c499c94ad7cda0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:53:15 +0200
-Subject: [PATCH RFC v3] MIPS: add support for vmlinux.bin appended DTB
-
-Add support for populating initial_boot_params through a dtb
-blob appended to raw vmlinux.bin.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-Changes RFC v2 -> v3
-
-* fixed !smp kernels (TODO: move it to its own patch
-
-Changes RFC v1 -> v2
-
-* changed all occurences of vmlinux to vmlinux.bin
-* clarified this applies to the raw vmlinux.bin without decompressor
-* s/initial_device_params/initial_boot_params/
-
-Initial comments by me still valid:
-
-Mostly adapted from how ARM is doing it.
-
-Sent as an RFC PATCH because I am not sure if this is the right way to
-it, and whether storing the pointer in initial_boot_params is a good
-idea, or a new variable should be introduced.
-
-The reasoning for initial_boot_params is that there is no common
-MIPS interface yet, so the next best thing was using that. This also
-has the advantage of keeping the original fw_args intact.
-
-This patch works for me on bcm63xx, where the bootloader expects
-an lzma compressed kernel, so I didn't want to double compress using
-the in-kernel compressed kernel support.
-
-Completely untested on anything except MIPS32 / big endian.
-
- arch/mips/Kconfig              | 18 ++++++++++++++++++
- arch/mips/kernel/head.S        | 19 +++++++++++++++++++
- arch/mips/kernel/vmlinux.lds.S |  7 +++++++
- 3 files changed, 43 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2523,6 +2523,24 @@ config RAPIDIO
- 
- source "drivers/rapidio/Kconfig"
- 
-+config MIPS_APPENDED_DTB
-+	bool "Use appended device tree blob to vmlinux.bin (EXPERIMENTAL)"
-+	depends on OF
-+	help
-+	  With this option, the boot code will look for a device tree binary
-+	  DTB) appended to raw vmlinux.bin (without decompressor).
-+	  (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
-+
-+	  This is meant as a backward compatibility convenience for those
-+	  systems with a bootloader that can't be upgraded to accommodate
-+	  the documented boot protocol using a device tree.
-+
-+	  Beware that there is very little in terms of protection against
-+	  this option being confused by leftover garbage in memory that might
-+	  look like a DTB header after a reboot if no actual DTB is appended
-+	  to vmlinux.bin.  Do not leave this option active in a production kernel
-+	  if you don't intend to always append a DTB.
-+
- endmenu
- 
- menu "Executable file formats"
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -139,6 +139,22 @@ NESTED(kernel_entry, 16, sp)			# kernel
- 	mtc0	t0, CP0_STATUS
- #endif /* CONFIG_MIPS_MT_SMTC */
- 
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	PTR_LA		t0, __appended_dtb
-+	PTR_LI		t3, 0
-+
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+	PTR_LI		t1, 0xd00dfeed
-+#else
-+	PTR_LI		t1, 0xedfe0dd0
-+#endif
-+	LONG_L		t2, (t0)
-+	bne		t1, t2, not_found
-+
-+	PTR_LA		t3, __appended_dtb
-+
-+not_found:
-+#endif
- 	PTR_LA		t0, __bss_start		# clear .bss
- 	LONG_S		zero, (t0)
- 	PTR_LA		t1, __bss_stop - LONGSIZE
-@@ -152,6 +168,10 @@ NESTED(kernel_entry, 16, sp)			# kernel
- 	LONG_S		a2, fw_arg2
- 	LONG_S		a3, fw_arg3
- 
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	LONG_S		t3, initial_boot_params
-+#endif
-+
- 	MTC0		zero, CP0_CONTEXT	# clear context register
- 	PTR_LA		$28, init_thread_union
- 	/* Set the SP after an empty pt_regs.  */
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -125,8 +125,14 @@ SECTIONS
- 	.exit.data : {
- 		EXIT_DATA
- 	}
--
-+#ifdef CONFIG_SMP
- 	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
-+#endif
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	__appended_dtb = .;
-+	/* leave space for appended DTB */
-+	. = . + 0x100000;
-+#endif
- 	/*
- 	 * Align to 64K in attempt to eliminate holes before the
- 	 * .bss..swapper_pg_dir section at the start of .bss.  This
diff --git a/target/linux/brcm63xx/patches-3.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/brcm63xx/patches-3.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
deleted file mode 100644
index 577df55d0e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From db896341299cbcb703821228574ba9b79b6a3565 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:57:51 +0200
-Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
-
----
- arch/mips/bcm63xx/boards/Kconfig        |  4 ++++
- arch/mips/bcm63xx/boards/board_common.c | 34 +++++++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,6 +1,10 @@
- menu "Board support"
- 	depends on BCM63XX
- 
-+config BOARD_BCM63XX_DT
-+	bool "Device Tree boards (experimential)"
-+	select USE_OF
-+
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
- 	select SSB
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -10,6 +10,8 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/of_fdt.h>
-+#include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
-@@ -17,6 +19,7 @@
- #include <asm/addrspace.h>
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -129,8 +132,23 @@ void __init board_setup(void)
- 	/* make sure we're running on expected cpu */
- 	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
- 		panic("unexpected CPU for bcm963xx board");
-+
-+#if CONFIG_OF
-+	if (initial_boot_params)
-+		__dt_setup_arch(initial_boot_params);
-+#endif
- }
- 
-+#if CONFIG_OF
-+void __init device_tree_init(void)
-+{
-+	if (!initial_boot_params)
-+		return;
-+
-+	unflatten_and_copy_device_tree();
-+}
-+#endif
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- 
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -149,6 +167,13 @@ static struct platform_device bcm63xx_gp
- 	.dev.platform_data = &bcm63xx_gpio_keys_data,
- };
- 
-+#if CONFIG_OF
-+static struct of_device_id of_ids[] = {
-+	{ /* filled at runtime */ },
-+	{ .compatible = "simple-bus" },
-+	{ },
-+};
-+#endif
- /*
-  * third stage init callback, register all board devices.
-  */
-@@ -158,6 +183,15 @@ int __init board_register_devices(void)
- 	int led_count = 0;
- 	int usbh_ports = 0;
- 
-+#if CONFIG_OF
-+	if (of_have_populated_dt()) {
-+		snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
-+			 "brcm,bcm%x", bcm63xx_get_cpu_id());
-+
-+		of_platform_populate(NULL, of_ids, NULL, NULL);
-+	}
-+#endif
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/brcm63xx/patches-3.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
deleted file mode 100644
index 58ffe5e82d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 26 Jun 2014 12:51:00 +0200
-Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
- by dtb
-
-Allow using the passed dtb's compatible property to match board_info
-structs instead of nvram's boardname field, which is not unique anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
- arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |    3 +++
- 3 files changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -715,6 +715,10 @@ static const struct board_info __initcon
- #endif
- };
- 
-+static struct of_device_id const bcm963xx_boards_dt[] = {
-+	{ },
-+};
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -726,6 +730,7 @@ void __init board_bcm963xx_init(void)
- 	char *board_name = NULL;
- 	u32 val;
- 	struct bcm_hcs *hcs;
-+	const struct of_device_id *board_match;
- 
- 	/* read base address of boot chip select (0)
- 	 * 6328/6362 do not have MPI but boot from a fixed address
-@@ -765,6 +770,16 @@ void __init board_bcm963xx_init(void)
- 	} else {
- 		board_name = bcm63xx_nvram_get_name();
- 	}
-+
-+	/* find board by compat */
-+	board_match = bcm63xx_match_board(bcm963xx_boards_dt);
-+	if (board_match) {
-+		board_early_setup(board_match->data,
-+				  bcm63xx_nvram_get_mac_address);
-+
-+		return;
-+	}
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -281,3 +281,21 @@ int __init board_register_devices(void)
- 
- 	return 0;
- }
-+
-+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
-+{
-+	const struct of_device_id *match;
-+	unsigned long dt_root;
-+
-+	if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
-+		return NULL;
-+
-+	dt_root = of_get_flat_dt_root();
-+
-+	for (match = m; match->compatible[0]; match++) {
-+		if (of_flat_dt_is_compatible(dt_root, match->compatible))
-+			return match;
-+	}
-+
-+	return NULL;
-+}
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -1,11 +1,14 @@
- #ifndef __BOARD_COMMON_H
- #define __BOARD_COMMON_H
- 
-+#include <linux/of.h>
- #include <board_bcm963xx.h>
- 
- void board_early_setup(const struct board_info *board,
- 		       int (*get_mac_address)(u8 mac[ETH_ALEN]));
- 
-+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
-+
- #if defined(CONFIG_BOARD_BCM963XX)
- void board_bcm963xx_init(void);
- #else
diff --git a/target/linux/brcm63xx/patches-3.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/brcm63xx/patches-3.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
deleted file mode 100644
index 9c5688c79e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 21 Nov 2014 16:54:06 +0100
-Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
- list
-
-Populate the compatible to board_info list to allow dtbs to be used
-for known boards.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -716,6 +716,48 @@ static const struct board_info __initcon
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-+#ifdef CONFIG_OF
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-+	{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-+	{ .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-+	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-+	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-+	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-+	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-+	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
-+	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
-+	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-+	{ .compatible = "usr,9108", .data = &board_96348gw_a, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-+	{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-+	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-+	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+#endif
-+#endif /* CONFIG_OF */
- 	{ },
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/371_add_of_node_available_by_alias.patch b/target/linux/brcm63xx/patches-3.14/371_add_of_node_available_by_alias.patch
deleted file mode 100644
index 99d778deb7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/371_add_of_node_available_by_alias.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -147,6 +147,18 @@ void __init device_tree_init(void)
- 
- 	unflatten_and_copy_device_tree();
- }
-+
-+int board_of_device_present(const char *alias)
-+{
-+	bool present;
-+	struct device_node *np;
-+
-+	np = of_find_node_by_path(alias);
-+	present = of_device_is_available(np);
-+	of_node_put(np);
-+
-+	return present;
-+}
- #endif
- 
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
- static inline void board_bcm963xx_init(void) { }
- #endif
- 
-+#if defined(CONFIG_OF)
-+int board_of_device_present(const char *alias);
-+#else
-+static inline void board_of_device_present(const char *alias)
-+{
-+	return 0;
-+}
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-3.14/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/brcm63xx/patches-3.14/372_dont_register_pflash_when_available_in_dtb.patch
deleted file mode 100644
index 88efc2360b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/372_dont_register_pflash_when_available_in_dtb.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- 
-+#include "boards/board_common.h"
-+
- static int flash_type;
- 
- static struct mtd_partition mtd_partitions[] = {
-@@ -164,6 +166,9 @@ int __init bcm63xx_flash_register(void)
- 
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
-+		/* don't register when already registered through from dtb */
-+		if (board_of_device_present("pflash"))
-+			return 0;
- 
- 		if (!mtd_resources[0].start) {
- 			/* read base address of boot chip select (0) */
diff --git a/target/linux/brcm63xx/patches-3.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/brcm63xx/patches-3.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
deleted file mode 100644
index c8c212b08f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 40c0e6e4f68ce0c759eb216b44cdfbe18de328b0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Dec 2014 00:20:07 +0100
-Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -15,6 +15,8 @@
- #include <linux/irqchip.h>
- #include <linux/irqchip/irq-bcm6345-ext.h>
- #include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -189,7 +191,17 @@ static void bcm63xx_init_irq(void)
- 				      ext_shift);
- }
- 
-+static const struct of_device_id irqchip_of_match_mips_cpu_intc __used __section(__irqchip_of_table) = {
-+	.compatible = "mti,cpu-interrupt-controller",
-+	.data = mips_cpu_irq_of_init,
-+};
-+
- void __init arch_init_irq(void)
- {
--	bcm63xx_init_irq();
-+#ifdef CONFIG_OF
-+	if (initial_boot_params)
-+		irqchip_init();
-+	else
-+#endif
-+		bcm63xx_init_irq();
- }
diff --git a/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
deleted file mode 100644
index b068a3220d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 19:55:32 +0100
-Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/gpio/Kconfig        |    8 +++
- drivers/gpio/Makefile       |    1 +
- drivers/gpio/gpio-bcm63xx.c |  122 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 131 insertions(+)
- create mode 100644 drivers/gpio/gpio-bcm63xx.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -821,6 +821,14 @@ config GPIO_BCM_KONA
- 	help
- 	  Turn on GPIO support for Broadcom "Kona" chips.
- 
-+config GPIO_BCM63XX
-+	bool "Broadcom BCM63XX GPIO"
-+	depends on MIPS || COMPILE_TEST
-+	select GPIO_GENERIC
-+	help
-+	  Turn on GPIO support for Broadcom BCM63XX xDSL chips.
-+
-+
- comment "USB GPIO expanders:"
- 
- config GPIO_VIPERBOARD
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp55
- obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
- obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
- obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
-+obj-$(CONFIG_GPIO_BCM63XX)	+= gpio-bcm63xx.o
- obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
- obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
- obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm63xx.c
-@@ -0,0 +1,122 @@
-+/*
-+ * Driver for BCM63XX memory-mapped GPIO controllers, based on
-+ * Generic driver for memory-mapped GPIO controllers.
-+ *
-+ * Copyright 2008 MontaVista Software, Inc.
-+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
-+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/compiler.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/log2.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/basic_mmio_gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+
-+static int bcm63xx_gpio_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct resource *dat_r, *dirout_r;
-+	void __iomem *dat;
-+	void __iomem *dirout;
-+	unsigned long sz;
-+	int err;
-+	struct bgpio_chip *bgc;
-+	struct bgpio_pdata *pdata = dev_get_platdata(dev);
-+
-+	dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (!dat_r || !dirout_r)
-+		return -EINVAL;
-+
-+	if (resource_size(dat_r) != resource_size(dirout_r))
-+		return -EINVAL;
-+
-+	sz = resource_size(dat_r);
-+
-+	dat = devm_ioremap_resource(dev, dat_r);
-+	if (IS_ERR(dat))
-+		return PTR_ERR(dat);
-+
-+	dirout = devm_ioremap_resource(dev, dirout_r);
-+	if (IS_ERR(dirout))
-+		return PTR_ERR(dirout);
-+
-+	bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
-+	if (!bgc)
-+		return -ENOMEM;
-+
-+	err = bgpio_init(bgc, dev, sz, dat, NULL, NULL, dirout, NULL,
-+			 BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+	if (err)
-+		return err;
-+
-+	platform_set_drvdata(pdev, bgc);
-+
-+	if (dev->of_node) {
-+		int id = of_alias_get_id(dev->of_node, "gpio");
-+		u32 ngpios;
-+
-+		if (id >= 0)
-+			bgc->gc.label = kasprintf(GFP_KERNEL,
-+						       "bcm63xx-gpio.%d", id);
-+
-+		if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
-+			bgc->gc.ngpio = ngpios;
-+
-+	} else if (pdata) {
-+		bgc->gc.base = pdata->base;
-+		if (pdata->ngpio > 0)
-+			bgc->gc.ngpio = pdata->ngpio;
-+	}
-+
-+	return gpiochip_add(&bgc->gc);
-+}
-+
-+static int bcm63xx_gpio_remove(struct platform_device *pdev)
-+{
-+	struct bgpio_chip *bgc = platform_get_drvdata(pdev);
-+
-+	return bgpio_remove(bgc);
-+}
-+
-+#ifdef CONFIG_OF
-+static struct of_device_id bcm63xx_gpio_of_match[] = {
-+	{ .compatible = "brcm,bcm6345-gpio" },
-+	{ },
-+};
-+#endif
-+
-+static struct platform_driver bcm63xx_gpio_driver = {
-+	.probe = bcm63xx_gpio_probe,
-+	.remove = bcm63xx_gpio_remove,
-+	.driver = {
-+		.name = "bcm63xx-gpio",
-+		.of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
-+	},
-+};
-+
-+module_platform_driver(bcm63xx_gpio_driver);
-+
-+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
deleted file mode 100644
index d561e43f8c..0000000000
--- a/target/linux/brcm63xx/patches-3.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From cc99dca188bb63ba390008e2f7fa62d0300233e0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 23:58:54 +0100
-Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c |    2 +
- arch/mips/bcm63xx/gpio.c                |  147 +++++++------------------------
- arch/mips/bcm63xx/prom.c                |    3 -
- 3 files changed, 33 insertions(+), 119 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -204,6 +204,8 @@ int __init board_register_devices(void)
- 	}
- #endif
- 
-+	bcm63xx_gpio_init();
-+
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
- 
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -5,147 +5,62 @@
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/spinlock.h>
- #include <linux/platform_device.h>
-+#include <linux/basic_mmio_gpio.h>
- #include <linux/gpio.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
--#include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- 
--static u32 gpio_out_low_reg;
--
--static void bcm63xx_gpio_out_low_reg_init(void)
-+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
--	switch (bcm63xx_get_cpu_id()) {
--	case BCM6345_CPU_ID:
--		gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
--		break;
--	default:
--		gpio_out_low_reg = GPIO_DATA_LO_REG;
--		break;
--	}
--}
--
--static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
--static u32 gpio_out_low, gpio_out_high;
-+	struct resource res[2];
-+	struct bgpio_pdata pdata;
- 
--static void bcm63xx_gpio_set(struct gpio_chip *chip,
--			     unsigned gpio, int val)
--{
--	u32 reg;
--	u32 mask;
--	u32 *v;
--	unsigned long flags;
--
--	if (gpio >= chip->ngpio)
--		BUG();
--
--	if (gpio < 32) {
--		reg = gpio_out_low_reg;
--		mask = 1 << gpio;
--		v = &gpio_out_low;
--	} else {
--		reg = GPIO_DATA_HI_REG;
--		mask = 1 << (gpio - 32);
--		v = &gpio_out_high;
--	}
--
--	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--	if (val)
--		*v |= mask;
--	else
--		*v &= ~mask;
--	bcm_gpio_writel(*v, reg);
--	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
--}
-+	memset(res, 0, sizeof(res));
-+	memset(&pdata, 0, sizeof(pdata));
- 
--static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
--{
--	u32 reg;
--	u32 mask;
-+	res[0].flags = IORESOURCE_MEM;
-+	res[0].start = bcm63xx_regset_address(RSET_GPIO);
-+	res[0].start += dir;
- 
--	if (gpio >= chip->ngpio)
--		BUG();
-+	res[0].end = res[0].start + 3;
- 
--	if (gpio < 32) {
--		reg = gpio_out_low_reg;
--		mask = 1 << gpio;
--	} else {
--		reg = GPIO_DATA_HI_REG;
--		mask = 1 << (gpio - 32);
--	}
-+	res[1].flags = IORESOURCE_MEM;
-+	res[1].start = bcm63xx_regset_address(RSET_GPIO);
-+	res[1].start += data;
- 
--	return !!(bcm_gpio_readl(reg) & mask);
--}
-+	res[1].end = res[1].start + 3;
- 
--static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
--				      unsigned gpio, int dir)
--{
--	u32 reg;
--	u32 mask;
--	u32 tmp;
--	unsigned long flags;
--
--	if (gpio >= chip->ngpio)
--		BUG();
--
--	if (gpio < 32) {
--		reg = GPIO_CTL_LO_REG;
--		mask = 1 << gpio;
--	} else {
--		reg = GPIO_CTL_HI_REG;
--		mask = 1 << (gpio - 32);
--	}
--
--	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--	tmp = bcm_gpio_readl(reg);
--	if (dir == BCM63XX_GPIO_DIR_IN)
--		tmp &= ~mask;
--	else
--		tmp |= mask;
--	bcm_gpio_writel(tmp, reg);
--	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
-+	pdata.base = id * 32;
-+	pdata.ngpio = ngpio;
- 
--	return 0;
-+	platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
-+					  &pdata, sizeof(pdata));
- }
- 
--static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+int __init bcm63xx_gpio_init(void)
- {
--	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
--}
-+	int ngpio = bcm63xx_gpio_count();
-+	int data_low_reg;
- 
--static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
--					 unsigned gpio, int value)
--{
--	bcm63xx_gpio_set(chip, gpio, value);
--	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
--}
-+	if (BCMCPU_IS_6345())
-+		data_low_reg = GPIO_DATA_LO_REG_6345;
-+	else
-+		data_low_reg = GPIO_DATA_LO_REG;
- 
-+	bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
- 
--static struct gpio_chip bcm63xx_gpio_chip = {
--	.label			= "bcm63xx-gpio",
--	.direction_input	= bcm63xx_gpio_direction_input,
--	.direction_output	= bcm63xx_gpio_direction_output,
--	.get			= bcm63xx_gpio_get,
--	.set			= bcm63xx_gpio_set,
--	.base			= 0,
--};
-+	if (ngpio <= 32)
-+		return 0;
- 
--int __init bcm63xx_gpio_init(void)
--{
--	bcm63xx_gpio_out_low_reg_init();
-+	bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
- 
--	gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
--	if (!BCMCPU_IS_6345())
--		gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
--	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
--	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
-+	return 0;
- 
--	return gpiochip_add(&bcm63xx_gpio_chip);
- }
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -54,9 +54,6 @@ void __init prom_init(void)
- 	reg &= ~mask;
- 	bcm_perf_writel(reg, PERF_CKCTL_REG);
- 
--	/* register gpiochip */
--	bcm63xx_gpio_init();
--
- 	/* detect and setup flash access */
- 	bcm63xx_flash_detect();
- 
diff --git a/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
deleted file mode 100644
index 0e691f7c65..0000000000
--- a/target/linux/brcm63xx/patches-3.14/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From ec905f2ea78ec40602a685ede31c5e4f9893d196 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 16:35:07 +0100
-Subject: [PATCH 3/6] net: bcm63xx_enet: use named gpio for ephy reset gpio
-
-Allow using a named optional gpio for ephy reset gpio registration.
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |    12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/gpio/consumer.h>
- 
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -2852,10 +2853,18 @@ static int bcm_enet_shared_probe(struct
- {
- 	struct resource *res;
- 	void __iomem *p[3];
-+	struct gpio_desc *ephy_reset;
- 	unsigned int i;
- 
- 	memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
- 
-+	ephy_reset = devm_gpiod_get(&pdev->dev, "ephy-reset");
-+	if (IS_ERR(ephy_reset)) {
-+		if (PTR_ERR(ephy_reset) != -ENOENT)
-+			return PTR_ERR(ephy_reset);
-+		ephy_reset = NULL;
-+	}
-+	
- 	for (i = 0; i < 3; i++) {
- 		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- 		p[i] = devm_ioremap_resource(&pdev->dev, res);
-@@ -2865,6 +2874,9 @@ static int bcm_enet_shared_probe(struct
- 
- 	memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
- 
-+	if (ephy_reset)
-+		gpiod_direction_output(ephy_reset, 0);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
deleted file mode 100644
index 288ccaa9d6..0000000000
--- a/target/linux/brcm63xx/patches-3.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:21:59 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
- arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
- arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
- 5 files changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -59,7 +59,7 @@ static struct board_info __initdata boar
- 	},
- 
- 	.ephy_reset_gpio		= 36,
--	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
-+	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
- };
- #endif
- 
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -278,9 +278,10 @@ int __init board_register_devices(void)
- 		platform_device_register(&bcm63xx_gpio_leds);
- 	}
- 
--	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--		gpio_request_one(board.ephy_reset_gpio,
--				board.ephy_reset_gpio_flags, "ephy-reset");
-+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
-+		bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
-+					board.ephy_reset_gpio_flags);
-+	}
- 
- 	/* count number of BUTTONs defined by this device */
- 	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -8,15 +8,24 @@
-  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- 
-+#include <asm/addrspace.h>
-+
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
- #include <linux/basic_mmio_gpio.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
- 
-+/* for registering lookups; make them large enough to hold OF names */
-+static char *gpio_chip_labels[] = {
-+	"xxxxxxxx.gpio-controller",
-+	"xxxxxxxx.gpio-controller",
-+};
-+
- static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
- 	struct resource res[2];
-@@ -40,6 +49,7 @@ static void __init bcm63xx_gpio_init_one
- 	pdata.base = id * 32;
- 	pdata.ngpio = ngpio;
- 
-+	sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
- 	platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
- 					  &pdata, sizeof(pdata));
- }
-@@ -64,3 +74,25 @@ int __init bcm63xx_gpio_init(void)
- 	return 0;
- 
- }
-+
-+static struct gpiod_lookup_table ephy_reset = {
-+	.dev_id = "bcm63xx_enet_shared.0",
-+	.table = {
-+		{ /* filled at runtime */ },
-+		{ },
-+	},
-+};
-+
-+
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
-+{
-+	if (ephy_reset.table[0].chip_label)
-+		return;
-+
-+	ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
-+	ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
-+	ephy_reset.table[0].con_id = "ephy-reset";
-+	ephy_reset.table[0].flags = flags;
-+
-+	gpiod_add_lookup_table(&ephy_reset);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -2,9 +2,11 @@
- #define BCM63XX_GPIO_H
- 
- #include <linux/init.h>
-+#include <linux/gpio/driver.h>
- #include <bcm63xx_cpu.h>
- 
- int __init bcm63xx_gpio_init(void);
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
- 
- static inline unsigned long bcm63xx_gpio_count(void)
- {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
- #include <linux/gpio_keys.h>
-+#include <linux/gpio/driver.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -58,8 +59,8 @@ struct board_info {
- 	/* External PHY reset GPIO */
- 	unsigned int ephy_reset_gpio;
- 
--	/* External PHY reset GPIO flags from gpio.h */
--	unsigned long ephy_reset_gpio_flags;
-+	/* External PHY reset GPIO flags from gpio/machine.h */
-+	enum gpio_lookup_flags ephy_reset_gpio_flags;
- 
- 	/* fallback sprom config */
- 	struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
deleted file mode 100644
index 2faf0dea29..0000000000
--- a/target/linux/brcm63xx/patches-3.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:26:50 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
-present in dtb
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/gpio.c |   7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -20,6 +20,8 @@
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
- 
-+#include "boards/board_common.h"
-+
- /* for registering lookups; make them large enough to hold OF names */
- static char *gpio_chip_labels[] = {
- 	"xxxxxxxx.gpio-controller",
-@@ -50,8 +52,9 @@ static void __init bcm63xx_gpio_init_one
- 	pdata.ngpio = ngpio;
- 
- 	sprintf(gpio_chip_labels[id], "bcm63xx-gpio.%d", id);
--	platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
--					  &pdata, sizeof(pdata));
-+	if (!board_of_device_present("gpio0"))
-+		platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
-+						  2, &pdata, sizeof(pdata));
- }
- 
- int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/brcm63xx/patches-3.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/brcm63xx/patches-3.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
deleted file mode 100644
index dcf7d618b5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:52:02 +0100
-Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
- ready gpio
-
-To prepare for a time when gpiobases don't need to be fixed anymore.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-pcmcia.c
-+++ b/arch/mips/bcm63xx/dev-pcmcia.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <asm/bootinfo.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio/driver.h>
- #include <bcm63xx_cs.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -101,6 +102,14 @@ static const struct {
- 	},
- };
- 
-+static struct gpiod_lookup_table pcmcia_gpios_table = {
-+	.dev_id = "bcm63xx_pcmcia.0",
-+	.table = {
-+		GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
-+		{ },
-+	},
-+};
-+
- int __init bcm63xx_pcmcia_register(void)
- {
- 	int ret, i;
-@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6348_CPU_ID:
- 		pd.ready_gpio = 22;
-+		pcmcia_gpios_table.table[0].chip_hwnum = 22;
- 		break;
- 
- 	case BCM6358_CPU_ID:
- 		pd.ready_gpio = 18;
-+		pcmcia_gpios_table.table[0].chip_hwnum = 18;
- 		break;
- 
- 	default:
- 		return -ENODEV;
- 	}
- 
-+	gpiod_add_lookup_table(&pcmcia_gpios_table);
-+
- 	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
- 	pcmcia_resources[0].end = pcmcia_resources[0].start +
- 		RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/brcm63xx/patches-3.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
deleted file mode 100644
index 524ca1aa0b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:54:56 +0100
-Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
-
-Use the new named gpio instead of relying on the hardware gpio numbers
-matching the virtual gpio numbers.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
- drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/pcmcia/bcm63xx_pcmcia.c
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
-@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
- 		stat |= SS_XVCARD;
- 	stat |= SS_POWERON;
- 
--	if (gpio_get_value(skt->pd->ready_gpio))
-+	if (gpiod_get_value(skt->ready_gpio))
- 		stat |= SS_READY;
- 
- 	return stat;
-@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
- 		goto err;
- 	}
- 
-+	/* get ready gpio */
-+	skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
-+	if (IS_ERR(skt->ready_gpio)) {
-+		ret = PTR_ERR(skt->ready_gpio);
-+		goto err;
-+	}
-+
- 	/* resources are static */
- 	sock->resource_ops = &pccard_static_ops;
- 	sock->ops = &bcm63xx_pcmcia_operations;
---- a/drivers/pcmcia/bcm63xx_pcmcia.h
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
-@@ -3,6 +3,7 @@
- 
- #include <linux/types.h>
- #include <linux/timer.h>
-+#include <linux/gpio/consumer.h>
- #include <pcmcia/ss.h>
- #include <bcm63xx_dev_pcmcia.h>
- 
-@@ -55,6 +56,9 @@ struct bcm63xx_pcmcia_socket {
- 
- 	/* base address of io memory */
- 	void __iomem *io_base;
-+
-+	/* ready gpio */
-+	struct gpio_desc *ready_gpio;
- };
- 
- #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
deleted file mode 100644
index 03534c0aab..0000000000
--- a/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -34,7 +34,7 @@ static struct mtd_partition mtd_partitio
- 	}
- };
- 
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- 
- static struct physmap_flash_data flash_data = {
- 	.width			= 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
- 	int nulllen = 0;
- 	int numslots;
- 	unsigned long offset;
-+	unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 	static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
-+	if (data && data->origin) {
-+		fis_origin = data->origin;
-+	} else {
-+		for (i = 0; i < numslots; i++) {
-+			if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+				fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+			}
-+		}
-+	}
-+
- 	for (i = 0; i < numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
- 			goto out;
- 		}
- 		new_fl->img = &buf[i];
--		if (data && data->origin)
--			buf[i].flash_base -= data->origin;
--		else
--			buf[i].flash_base &= master->size-1;
-+		if (fis_origin)
-+			buf[i].flash_base -= fis_origin;
-+
-+		buf[i].flash_base &= (master->size << 1) - 1;
- 
- 		/* I'm sure the JFFS2 code has done me permanent damage.
- 		 * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644
index 92c264bd76..0000000000
--- a/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-@@ -85,8 +85,10 @@ struct bcm_tag {
- 	__u32 rootfs_crc;
- 	/* 224-227: CRC32 of kernel partition */
- 	__u32 kernel_crc;
--	/* 228-235: Unused at present */
--	char reserved1[8];
-+	/* 228-231: Image sequence number */
-+	char image_sequence[4];
-+	/* 222-235: Openwrt: real rootfs length */
-+	__u32 real_rootfs_length;
- 	/* 236-239: CRC32 of header excluding last 20 bytes */
- 	__u32 header_crc;
- 	/* 240-255: Unused at present */
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -110,7 +110,8 @@ static int bcm63xx_parse_cfe_partitions(
- 		} else {
- 			/* OpenWrt layout */
- 			rootfsaddr = kerneladdr + kernellen;
--			rootfslen = spareaddr - rootfsaddr;
-+			rootfslen = buf->real_rootfs_length;
-+			spareaddr = rootfsaddr + rootfslen;
- 		}
- 	} else {
- 		pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644
index 8e30ce4591..0000000000
--- a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1634,7 +1634,7 @@ static int compute_hw_mtu(struct bcm_ene
- 	actual_mtu = mtu;
- 
- 	/* add ethernet header + vlan tag size */
--	actual_mtu += VLAN_ETH_HLEN;
-+	actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
- 
- 	if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- 		return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644
index 0745c3cc8f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -104,6 +104,8 @@ void __init board_early_setup(const stru
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G3_EXT_MII |
- 				GPIO_MODE_6348_G0_EXT_MII;
-+		else if (BCMCPU_IS_6358())
-+			val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -651,6 +651,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
- #define GPIO_MODE_6358_UTOPIA		(1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- 
- #define GPIO_MODE_6368_ANALOG_AFE_0	(1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1	(1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644
index b9420d5567..0000000000
--- a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
- 1 files changed, 41 insertions(+), 43 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -871,10 +871,8 @@ static int bcm_enet_open(struct net_devi
- 	struct bcm_enet_priv *priv;
- 	struct sockaddr addr;
- 	struct device *kdev;
--	struct phy_device *phydev;
- 	int i, ret;
- 	unsigned int size;
--	char phy_id[MII_BUS_ID_SIZE + 3];
- 	void *p;
- 	u32 val;
- 
-@@ -882,40 +880,10 @@ static int bcm_enet_open(struct net_devi
- 	kdev = &priv->pdev->dev;
- 
- 	if (priv->has_phy) {
--		/* connect to PHY */
--		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--			 priv->mii_bus->id, priv->phy_id);
--
--		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--				     PHY_INTERFACE_MODE_MII);
--
--		if (IS_ERR(phydev)) {
--			dev_err(kdev, "could not attach to PHY\n");
--			return PTR_ERR(phydev);
--		}
--
--		/* mask with MAC supported features */
--		phydev->supported &= (SUPPORTED_10baseT_Half |
--				      SUPPORTED_10baseT_Full |
--				      SUPPORTED_100baseT_Half |
--				      SUPPORTED_100baseT_Full |
--				      SUPPORTED_Autoneg |
--				      SUPPORTED_Pause |
--				      SUPPORTED_MII);
--		phydev->advertising = phydev->supported;
--
--		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--			phydev->advertising |= SUPPORTED_Pause;
--		else
--			phydev->advertising &= ~SUPPORTED_Pause;
--
--		dev_info(kdev, "attached PHY at address %d [%s]\n",
--			 phydev->addr, phydev->drv->name);
--
-+		/* Reset state */
- 		priv->old_link = 0;
- 		priv->old_duplex = -1;
- 		priv->old_pause = -1;
--		priv->phydev = phydev;
- 	}
- 
- 	/* mask all interrupts and request them */
-@@ -925,7 +893,7 @@ static int bcm_enet_open(struct net_devi
- 
- 	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- 	if (ret)
--		goto out_phy_disconnect;
-+		return ret;
- 
- 	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
- 			  dev->name, dev);
-@@ -1128,9 +1096,6 @@ out_freeirq_rx:
- out_freeirq:
- 	free_irq(dev->irq, dev);
- 
--out_phy_disconnect:
--	phy_disconnect(priv->phydev);
--
- 	return ret;
- }
- 
-@@ -1235,12 +1200,6 @@ static int bcm_enet_stop(struct net_devi
- 	free_irq(priv->irq_rx, dev);
- 	free_irq(dev->irq, dev);
- 
--	/* release phy */
--	if (priv->has_phy) {
--		phy_disconnect(priv->phydev);
--		priv->phydev = NULL;
--	}
--
- 	return 0;
- }
- 
-@@ -1835,6 +1794,8 @@ static int bcm_enet_probe(struct platfor
- 
- 	/* MII bus registration */
- 	if (priv->has_phy) {
-+		struct phy_device *phydev;
-+		char phy_id[MII_BUS_ID_SIZE + 3];
- 
- 		priv->mii_bus = mdiobus_alloc();
- 		if (!priv->mii_bus) {
-@@ -1872,6 +1833,38 @@ static int bcm_enet_probe(struct platfor
- 			dev_err(&pdev->dev, "unable to register mdio bus\n");
- 			goto out_free_mdio;
- 		}
-+
-+		/* connect to PHY */
-+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+			 priv->mii_bus->id, priv->phy_id);
-+
-+		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+				     PHY_INTERFACE_MODE_MII);
-+
-+		if (IS_ERR(phydev)) {
-+			dev_err(&pdev->dev, "could not attach to PHY\n");
-+			goto out_unregister_mdio;
-+		}
-+
-+		/* mask with MAC supported features */
-+		phydev->supported &= (SUPPORTED_10baseT_Half |
-+				      SUPPORTED_10baseT_Full |
-+				      SUPPORTED_100baseT_Half |
-+				      SUPPORTED_100baseT_Full |
-+				      SUPPORTED_Autoneg |
-+				      SUPPORTED_Pause |
-+				      SUPPORTED_MII);
-+		phydev->advertising = phydev->supported;
-+
-+		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+			phydev->advertising |= SUPPORTED_Pause;
-+		else
-+			phydev->advertising &= ~SUPPORTED_Pause;
-+
-+		dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
-+			 phydev->addr, phydev->drv->name);
-+
-+		priv->phydev = phydev;
- 	} else {
- 
- 		/* run platform code to initialize PHY device */
-@@ -1917,6 +1910,9 @@ static int bcm_enet_probe(struct platfor
- 	return 0;
- 
- out_unregister_mdio:
-+	if (priv->phydev)
-+		phy_disconnect(priv->phydev);
-+
- 	if (priv->mii_bus)
- 		mdiobus_unregister(priv->mii_bus);
- 
-@@ -1958,6 +1954,8 @@ static int bcm_enet_remove(struct platfo
- 	enet_writel(priv, 0, ENET_MIISC_REG);
- 
- 	if (priv->has_phy) {
-+		phy_disconnect(priv->phydev);
-+		priv->phydev = NULL;
- 		mdiobus_unregister(priv->mii_bus);
- 		mdiobus_free(priv->mii_bus);
- 	} else {
diff --git a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644
index 1cff9c1ff9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -967,6 +967,19 @@
- #define ENETSW_PORTOV_FDX_MASK		(1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)
- 
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)	(0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN	(1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK	(3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE	(0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE	(1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE	(2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN	(1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)	(0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG		(0xb0)
- #define ENETSW_MDIOC_EXT_MASK		(1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2229,6 +2229,18 @@ static int bcm_enetsw_open(struct net_de
- 		priv->sw_port_link[i] = 0;
- 	}
- 
-+	/* enable external ports */
-+	for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+		u8 rgmii_ctrl;
-+
-+		if (!priv->used_ports[i].used)
-+			continue;
-+
-+		rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+		rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+	}
-+
- 	/* reset mib */
- 	val = enetsw_readb(priv, ENETSW_GMCR_REG);
- 	val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644
index 24a5888ef5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   33 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,9 +16,12 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- 
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- 
-@@ -65,6 +68,21 @@ void __init bcm63xx_flash_force_phys_bas
- 	mtd_resources[0].end = end;
- }
- 
-+static struct flash_platform_data bcm63xx_flash_data = {
-+	.part_probe_types	= bcm63xx_part_types,
-+};
-+
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+	{
-+		.bus_num	= 0,
-+		.chip_select	= 0,
-+		.mode		= 0,
-+		.max_speed_hz	= 781000,
-+		.modalias	= "m25p80",
-+		.platform_data	= &bcm63xx_flash_data,
-+	},
-+};
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
- 	u32 val;
-@@ -72,9 +90,15 @@ static int __init bcm63xx_detect_flash_t
- 	switch (bcm63xx_get_cpu_id()) {
- 	case BCM6318_CPU_ID:
- 		/* only support serial flash */
-+		bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
- 		return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6328_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+		if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
- 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
-@@ -93,12 +117,20 @@ static int __init bcm63xx_detect_flash_t
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 	case BCM6362_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+		if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
- 			return BCM63XX_FLASH_TYPE_NAND;
- 	case BCM6368_CPU_ID:
- 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+		if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
- 		case STRAPBUS_6368_BOOT_SEL_NAND:
- 			return BCM63XX_FLASH_TYPE_NAND;
-@@ -109,6 +141,11 @@ static int __init bcm63xx_detect_flash_t
- 		}
- 	case BCM63268_CPU_ID:
- 		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+		if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+		else
-+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- 		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
- 			return BCM63XX_FLASH_TYPE_SERIAL;
- 		else
-@@ -181,8 +218,15 @@ int __init bcm63xx_flash_register(void)
- 
- 		return platform_device_register(&mtd_dev);
- 	case BCM63XX_FLASH_TYPE_SERIAL:
--		pr_warn("unsupported serial flash detected\n");
--		return -ENODEV;
-+		if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+		    BCMCPU_IS_63268())
-+			bcm63xx_spi_flash_info[0].bus_num = 1;
-+
-+		if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
-+			bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE;
-+
-+		return spi_register_board_info(bcm63xx_spi_flash_info,
-+					ARRAY_SIZE(bcm63xx_spi_flash_info));
- 	case BCM63XX_FLASH_TYPE_NAND:
- 		pr_warn("unsupported NAND flash detected\n");
- 		return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -708,6 +708,7 @@
- #define GPIO_STRAPBUS_REG		0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST	(1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND	0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
-@@ -1578,6 +1579,7 @@
- #define IDDQ_CTRL_63268_USBH		(1 << 4)
- 
- #define MISC_STRAPBUS_6328_REG		0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST	(1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT	7
- #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
deleted file mode 100644
index 3511120468..0000000000
--- a/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:32:36 +0200
-Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
-
----
- drivers/mtd/maps/physmap.c  |    4 +++-
- include/linux/mtd/physmap.h |    1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -96,6 +96,7 @@ static int physmap_flash_probe(struct pl
- {
- 	struct physmap_flash_data *physmap_data;
- 	struct physmap_flash_info *info;
-+	struct mtd_part_parser_data *pp_data;
- 	const char * const *probe_type;
- 	const char * const *part_types;
- 	int err = 0;
-@@ -187,8 +188,9 @@ static int physmap_flash_probe(struct pl
- 	spin_lock_init(&info->vpp_lock);
- 
- 	part_types = physmap_data->part_probe_types ? : part_probe_types;
-+	pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
- 
--	mtd_device_parse_register(info->cmtd, part_types, NULL,
-+	mtd_device_parse_register(info->cmtd, part_types, pp_data,
- 				  physmap_data->parts, physmap_data->nr_parts);
- 	return 0;
- 
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -31,6 +31,7 @@ struct physmap_flash_data {
- 	char                    *probe_type;
- 	struct mtd_partition	*parts;
- 	const char * const	*part_probe_types;
-+	struct mtd_part_parser_data *pp_data;
- };
- 
- #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644
index 09600057c5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -36,6 +36,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- 
- #include "board_common.h"
- 
-@@ -196,6 +197,7 @@ int __init board_register_devices(void)
- 	int button_count = 0;
- 	int led_count = 0;
- 	int usbh_ports = 0;
-+	int i;
- 
- #if CONFIG_OF
- 	if (of_have_populated_dt()) {
-@@ -296,6 +298,10 @@ int __init board_register_devices(void)
- 		platform_device_register(&bcm63xx_gpio_keys_device);
- 	}
- 
-+	/* register any fixups */
-+	for (i = 0; i < board.has_caldata; i++)
-+		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
- 	return 0;
- }
- 
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_fallback_sprom.h>
-+#include <pci_ath9k_fixup.h>
- 
- /*
-  * flash mapping
-@@ -17,6 +18,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET	0x570
- #define BCM963XX_NVRAM_OFFSET		0x580
- 
-+struct ath9k_caldata {
-+	unsigned int	slot;
-+	u32		caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -37,6 +43,10 @@ struct board_info {
- 	unsigned int	has_uart0:1;
- 	unsigned int	has_uart1:1;
- 	unsigned int	use_fallback_sprom:1;
-+	unsigned int	has_caldata:2;
-+
-+	/* wifi calibration data config */
-+	struct ath9k_caldata caldata[2];
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
deleted file mode 100644
index 01a86f35e9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:33:03 +0200
-Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
-
----
- drivers/mtd/devices/m25p80.c |    3 +++
- include/linux/spi/flash.h    |    2 ++
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1150,6 +1150,9 @@ static int m25p_probe(struct spi_device
- 			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
- 	}
- 
-+	if (data && data->pp_data)
-+		memcpy(&ppdata, data->pp_data, sizeof(ppdata));
-+
- 	info = (void *)id->driver_data;
- 
- 	if (info->jedec_id) {
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
-  *	with chips that can't be queried for JEDEC or other IDs
-  * @part_probe_types: optional list of MTD parser names to use for
-  *	partitioning
-+ * @pp_data: optional partition parser data.
-  *
-  * @max_transfer_len: option maximum read/write length limitation for
-  *	SPI controllers not able to transfer any length commands.
-@@ -30,6 +31,7 @@ struct flash_platform_data {
- 	char		*type;
- 
- 	const char	**part_probe_types;
-+	struct mtd_part_parser_data *pp_data;
- 
- 	unsigned int	max_transfer_len;
- 	/* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644
index 55639cafab..0000000000
--- a/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -236,3 +236,8 @@ int __init bcm63xx_flash_register(void)
- 		return -ENODEV;
- 	}
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+	return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -13,4 +13,6 @@ void bcm63xx_flash_force_phys_base_addre
- 
- int __init bcm63xx_flash_register(void);
- 
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644
index 7a7c8258d7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
- 		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--		   usb-common.o sprom.o
-+		   pci-ath9k-fixup.o usb-common.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,199 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)	bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+	{
-+		.slot = 255,
-+		.pdata = {
-+			.led_pin	= -1,
-+		},
-+	},
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+	u32 addr;
-+
-+	if (BCMCPU_IS_6328()) {
-+		addr = 0x18000000;
-+	} else {
-+		addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+		addr &= MPI_CSBASE_BASE_MASK;
-+	}
-+
-+	switch (bcm63xx_flash_get_type()) {
-+	case BCM63XX_FLASH_TYPE_PARALLEL:
-+		memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+		return eeprom;
-+	case BCM63XX_FLASH_TYPE_SERIAL:
-+		/* the first megabyte is memory mapped */
-+		if (offset < 0x100000) {
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			return eeprom;
-+		}
-+
-+		if (BCMCPU_IS_6328()) {
-+			/* we can change the memory mapped megabyte */
-+			bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+			memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+			bcm_hsspi_writel(0, 0x18);
-+			return eeprom;
-+		}
-+		/* can't do anything here without talking to the SPI controller. */
-+	case BCM63XX_FLASH_TYPE_NAND:
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	struct ath9k_platform_data *pdata = NULL;
-+	struct pci_dev *bridge = pci_upstream_bridge(dev);
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	unsigned i;
-+
-+	for (i = 0; i < ath9k_num_fixups; i++) {
-+		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+		pdata = &ath9k_fixups[i].pdata;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	switch (bcm63xx_get_cpu_id()) {
-+	case BCM6328_CPU_ID:
-+		val = BCM_PCIE_MEM_BASE_PA_6328;
-+		break;
-+	case BCM6348_CPU_ID:
-+	case BCM6358_CPU_ID:
-+	case BCM6368_CPU_ID:
-+		val = BCM_PCI_MEM_BASE_PA;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	mem = ioremap(val, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	if (bridge)
-+		pci_enable_device(bridge);
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set offset to first reg address */
-+	cal_data += 3;
-+	while(*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		writel(val, mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	if (bridge)
-+		pci_disable_device(bridge);
-+
-+	iounmap(mem);
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+		return;
-+
-+	if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+		return;
-+
-+	ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+	ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
deleted file mode 100644
index 3b02c072cd..0000000000
--- a/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-Allow bcm63xxpart to receive a caldata offset if calibration data is
-contained in flash.
----
- drivers/mtd/bcm63xxpart.c      |   51 ++++++++++++++++++++++++++++++++++++---
- include/linux/mtd/partitions.h |    2 +
- 2 files changed, 49 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -53,10 +53,12 @@ static int bcm63xx_parse_cfe_partitions(
- 	struct mtd_partition *parts;
- 	int ret;
- 	size_t retlen;
--	unsigned int rootfsaddr, kerneladdr, spareaddr;
-+	unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
- 	unsigned int rootfslen, kernellen, sparelen, totallen;
- 	unsigned int cfelen, nvramlen;
- 	unsigned int cfe_erasesize;
-+	unsigned int caldatalen1 = 0, caldataaddr1 = 0;
-+	unsigned int caldatalen2 = 0, caldataaddr2 = 0;
- 	int i;
- 	u32 computed_crc;
- 	bool rootfs_first = false;
-@@ -70,6 +72,24 @@ static int bcm63xx_parse_cfe_partitions(
- 	cfelen = cfe_erasesize;
- 	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
- 	nvramlen = roundup(nvramlen, cfe_erasesize);
-+	nvramaddr = master->size - nvramlen;
-+
-+	if (data) {
-+		if (data->caldata[0]) {
-+			caldatalen1 = cfe_erasesize;
-+			caldataaddr1 = rounddown(data->caldata[0],
-+						 cfe_erasesize);
-+		}
-+		if (data->caldata[1]) {
-+			caldatalen2 = cfe_erasesize;
-+			caldataaddr2 = rounddown(data->caldata[1],
-+						 cfe_erasesize);
-+		}
-+		if (caldataaddr1 == caldataaddr2) {
-+			caldataaddr2 = 0;
-+			caldatalen2 = 0;
-+		}
-+	}
- 
- 	/* Allocate memory for buffer */
- 	buf = vmalloc(sizeof(struct bcm_tag));
-@@ -121,7 +141,7 @@ static int bcm63xx_parse_cfe_partitions(
- 		rootfsaddr = 0;
- 		spareaddr = cfelen;
- 	}
--	sparelen = master->size - spareaddr - nvramlen;
-+	sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
- 
- 	/* Determine number of partitions */
- 	if (rootfslen > 0)
-@@ -130,6 +150,12 @@ static int bcm63xx_parse_cfe_partitions(
- 	if (kernellen > 0)
- 		nrparts++;
- 
-+	if (caldatalen1 > 0)
-+		nrparts++;
-+
-+	if (caldatalen2 > 0)
-+		nrparts++;
-+
- 	/* Ask kernel for more memory */
- 	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
- 	if (!parts) {
-@@ -167,15 +193,32 @@ static int bcm63xx_parse_cfe_partitions(
- 		curpart++;
- 	}
- 
-+	if (caldatalen1 > 0) {
-+		if (caldatalen2 > 0)
-+			parts[curpart].name = "cal_data1";
-+		else
-+			parts[curpart].name = "cal_data";
-+		parts[curpart].offset = caldataaddr1;
-+		parts[curpart].size = caldatalen1;
-+		curpart++;
-+	}
-+
-+	if (caldatalen2 > 0) {
-+		parts[curpart].name = "cal_data2";
-+		parts[curpart].offset = caldataaddr2;
-+		parts[curpart].size = caldatalen2;
-+		curpart++;
-+	}
-+
- 	parts[curpart].name = "nvram";
--	parts[curpart].offset = master->size - nvramlen;
-+	parts[curpart].offset = nvramaddr;
- 	parts[curpart].size = nvramlen;
- 	curpart++;
- 
- 	/* Global partition "linux" to make easy firmware upgrade */
- 	parts[curpart].name = "linux";
- 	parts[curpart].offset = cfelen;
--	parts[curpart].size = master->size - cfelen - nvramlen;
-+	parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
- 
- 	for (i = 0; i < nrparts; i++)
- 		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -56,10 +56,12 @@ struct device_node;
- /**
-  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
-  * @origin: for RedBoot, start address of MTD device
-+ * @caldata: for CFE, start address of wifi calibration data
-  * @of_node: for OF parsers, device node containing partitioning information
-  */
- struct mtd_part_parser_data {
- 	unsigned long origin;
-+	unsigned long caldata[2];
- 	struct device_node *of_node;
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
deleted file mode 100644
index b329c312f5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:55:26 +0200
-Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
-
----
- arch/mips/bcm63xx/boards/board_common.c              |    2 +-
- arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
- 3 files changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -269,7 +269,7 @@ int __init board_register_devices(void)
- 	if (board.num_spis)
- 		spi_register_board_info(board.spis, board.num_spis);
- 
--	bcm63xx_flash_register();
-+	bcm63xx_flash_register(board.has_caldata, board.caldata);
- 
- 	/* count number of LEDs defined by this device */
- 	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -37,12 +37,15 @@ static struct mtd_partition mtd_partitio
- 	}
- };
- 
-+static struct mtd_part_parser_data bcm63xx_parser_data;
-+
- static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- 
- static struct physmap_flash_data flash_data = {
- 	.width			= 2,
- 	.parts			= mtd_partitions,
- 	.part_probe_types	= bcm63xx_part_types,
-+	.pp_data		= &bcm63xx_parser_data,
- };
- 
- static struct resource mtd_resources[] = {
-@@ -70,6 +73,7 @@ void __init bcm63xx_flash_force_phys_bas
- 
- static struct flash_platform_data bcm63xx_flash_data = {
- 	.part_probe_types	= bcm63xx_part_types,
-+	.pp_data		= &bcm63xx_parser_data,
- };
- 
- static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -197,9 +201,13 @@ void __init bcm63xx_flash_detect(void)
- 	}
- }
- 
--int __init bcm63xx_flash_register(void)
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
- {
- 	u32 val;
-+	unsigned int i;
-+
-+	for (i = 0; i < num_caldata; i++)
-+		bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
- 
- 	switch (flash_type) {
- 	case BCM63XX_FLASH_TYPE_PARALLEL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -1,6 +1,8 @@
- #ifndef __BCM63XX_FLASH_H
- #define __BCM63XX_FLASH_H
- 
-+#include <board_bcm963xx.h>
-+
- enum {
- 	BCM63XX_FLASH_TYPE_PARALLEL,
- 	BCM63XX_FLASH_TYPE_SERIAL,
-@@ -11,7 +13,7 @@ void bcm63xx_flash_detect(void);
- 
- void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
- 
--int __init bcm63xx_flash_register(void);
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
- 
- int bcm63xx_flash_get_type(void);
- 
diff --git a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644
index 5398c3dd1f..0000000000
--- a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
- 
- 
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+	unsigned endian_check) __init;
- 
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,7 @@
- struct ath9k_caldata {
- 	unsigned int	slot;
- 	u32		caldata_offset;
-+	unsigned int	endian_check:1;
- };
- 
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -181,12 +181,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- 
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+	unsigned endian_check)
- {
- 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- 		return;
- 
- 	ath9k_fixups[ath9k_num_fixups].slot = slot;
-+	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
- 
- 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- 		return;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -300,7 +300,8 @@ int __init board_register_devices(void)
- 
- 	/* register any fixups */
- 	for (i = 0; i < board.has_caldata; i++)
--		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+			board.caldata[i].endian_check);
- 
- 	return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644
index 13101361e8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -301,7 +301,7 @@ int __init board_register_devices(void)
- 	/* register any fixups */
- 	for (i = 0; i < board.has_caldata; i++)
- 		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--			board.caldata[i].endian_check);
-+			board.caldata[i].endian_check, board.caldata[i].led_pin);
- 
- 	return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -182,13 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- 
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--	unsigned endian_check)
-+	unsigned endian_check, int led_pin)
- {
- 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- 		return;
- 
- 	ath9k_fixups[ath9k_num_fixups].slot = slot;
- 	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+	ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
- 
- 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- 		return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -22,6 +22,7 @@ struct ath9k_caldata {
- 	unsigned int	slot;
- 	u32		caldata_offset;
- 	unsigned int	endian_check:1;
-+	int		led_pin;
- };
- 
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- 
- 
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--	unsigned endian_check) __init;
-+	unsigned endian_check, int led_pin) __init;
- 
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644
index bff489b960..0000000000
--- a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
- 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
- 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
- 		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--		   pci-ath9k-fixup.o usb-common.o sprom.o
-+		   pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -37,6 +37,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- #include "board_common.h"
- 
-@@ -299,9 +300,19 @@ int __init board_register_devices(void)
- 	}
- 
- 	/* register any fixups */
--	for (i = 0; i < board.has_caldata; i++)
--		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--			board.caldata[i].endian_check, board.caldata[i].led_pin);
-+	for (i = 0; i < board.has_caldata; i++) {
-+		switch (board.caldata[i].vendor) {
-+		case PCI_VENDOR_ID_ATHEROS:
-+			pci_enable_ath9k_fixup(board.caldata[i].slot,
-+				board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+				board.caldata[i].led_pin);
-+			break;
-+		case PCI_VENDOR_ID_RALINK:
-+			pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+				board.caldata[i].eeprom);
-+			break;
-+		}
-+	}
- 
- 	return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -201,7 +201,7 @@ void __init bcm63xx_flash_detect(void)
- 	}
- }
- 
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
- 	u32 val;
- 	unsigned int i;
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+	unsigned slot;
-+	u8 mac[ETH_ALEN];
-+	struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+	{
-+		.slot = 255,
-+	},
-+	{
-+		.slot = 255,
-+	},
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+	unsigned i;
-+	struct rt2x00_platform_data *pdata = NULL;
-+
-+	for (i = 0; i < rt2x00_num_fixups; i++) {
-+		if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		pdata = &rt2x00_fixups[i].pdata;
-+		break;
-+	}
-+
-+	dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+	if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+	if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+		return;
-+
-+	rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+	rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -13,7 +13,7 @@ void bcm63xx_flash_detect(void);
- 
- void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
- 
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
- 
- int bcm63xx_flash_get_type(void);
- 
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -11,6 +11,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- 
- /*
-  * flash mapping
-@@ -18,11 +19,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET	0x570
- #define BCM963XX_NVRAM_OFFSET		0x580
- 
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+	unsigned int	vendor;
- 	unsigned int	slot;
- 	u32		caldata_offset;
-+	/* Atheros */
- 	unsigned int	endian_check:1;
- 	int		led_pin;
-+	/* Ralink */
-+	char*		eeprom;
- };
- 
- /*
-@@ -48,7 +53,7 @@ struct board_info {
- 	unsigned int	has_caldata:2;
- 
- 	/* wifi calibration data config */
--	struct ath9k_caldata caldata[2];
-+	struct bcm63xx_caldata caldata[2];
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644
index 48a33ef761..0000000000
--- a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -336,6 +336,9 @@ struct bcm_enet_priv {
- 	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- 	int sw_port_link[ENETSW_MAX_PORT];
- 
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
-+
- 	/* used to poll switch port state */
- 	struct timer_list swphy_poll;
- 	spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -31,6 +31,7 @@
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/b53.h>
- 
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1979,7 +1980,8 @@ static int bcm_enet_remove(struct platfo
- 	return 0;
- }
- 
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
- 	.probe	= bcm_enet_probe,
- 	.remove	= bcm_enet_remove,
- 	.driver	= {
-@@ -1988,6 +1990,42 @@ struct platform_driver bcm63xx_enet_driv
- 	},
- };
- 
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+	.chip_id = 0x6300,
-+	.big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+	.name		= "b53-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bcm63xx_b53_pdata,
-+	},
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+	int ret;
-+
-+	bcm63xx_b53_pdata.regs = priv->base;
-+	bcm63xx_b53_pdata.enabled_ports = port_mask;
-+	bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+	ret = platform_device_register(&bcm63xx_b53_dev);
-+	if (!ret)
-+		priv->b53_device = &bcm63xx_b53_dev;
-+
-+	return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+	if (priv->b53_device)
-+		platform_device_unregister(&bcm63xx_b53_dev);
-+
-+	priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2241,29 +2279,6 @@ static int bcm_enetsw_open(struct net_de
- 		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
- 	}
- 
--	/* reset mib */
--	val = enetsw_readb(priv, ENETSW_GMCR_REG);
--	val |= ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--	val &= ~ENETSW_GMCR_RST_MIB_MASK;
--	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--	mdelay(1);
--
--	/* force CPU port state */
--	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--	/* enable switch forward engine */
--	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--	val |= ENETSW_SWMODE_FWD_EN_MASK;
--	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--	/* enable jumbo on all ports */
--	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
- 	/* initialize flow control buffer allocation */
- 	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
- 			ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2723,6 +2738,9 @@ static int bcm_enetsw_probe(struct platf
- 	struct bcm63xx_enetsw_platform_data *pd;
- 	struct resource *res_mem;
- 	int ret, irq_rx, irq_tx;
-+	unsigned i, num_ports = 0;
-+	u16 port_mask = BIT(8);
-+	u8 val;
- 
- 	/* stop if shared driver failed, assume driver->probe will be
- 	 * called in the same order we register devices (correct ?)
-@@ -2812,6 +2830,43 @@ static int bcm_enetsw_probe(struct platf
- 	priv->pdev = pdev;
- 	priv->net_dev = dev;
- 
-+	/* reset mib */
-+	val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+	val |= ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+	val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+	mdelay(1);
-+
-+	/* force CPU port state */
-+	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+	/* enable switch forward engine */
-+	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+	val |= ENETSW_SWMODE_FWD_EN_MASK;
-+	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+	/* enable jumbo on all ports */
-+	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+	for (i = 0; i < priv->num_ports; i++) {
-+		struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+		if (!port->used)
-+			continue;
-+
-+		num_ports++;
-+		port_mask |= BIT(i);
-+	}
-+
-+	/* only register if there is more than one external port */
-+	if (num_ports > 1)
-+		bcmenet_switch_register(priv, port_mask);
-+
- 	return 0;
- 
- out_put_clk:
-@@ -2840,6 +2895,9 @@ static int bcm_enetsw_remove(struct plat
- 	priv = netdev_priv(dev);
- 	unregister_netdev(dev);
- 
-+	/* remove switch */
-+	bcmenet_switch_unregister(priv);
-+
- 	/* release device resources */
- 	iounmap(priv->base);
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644
index 47255835b3..0000000000
--- a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2785,12 +2785,6 @@ static int bcm_enetsw_probe(struct platf
- 	if (ret)
- 		goto out;
- 
--	if (!request_mem_region(res_mem->start, resource_size(res_mem),
--				"bcm63xx_enetsw")) {
--		ret = -EBUSY;
--		goto out;
--	}
--
- 	priv->base = ioremap(res_mem->start, resource_size(res_mem));
- 	if (priv->base == NULL) {
- 		ret = -ENOMEM;
diff --git a/target/linux/brcm63xx/patches-3.14/425-bcm63xxpart_parse_paritions_from_dt.patch b/target/linux/brcm63xx/patches-3.14/425-bcm63xxpart_parse_paritions_from_dt.patch
deleted file mode 100644
index 53fc4c5d23..0000000000
--- a/target/linux/brcm63xx/patches-3.14/425-bcm63xxpart_parse_paritions_from_dt.patch
+++ /dev/null
@@ -1,357 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -32,6 +32,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- 
- #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <asm/mach-bcm63xx/bcm963xx_tag.h>
-@@ -43,66 +44,35 @@
- 
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
- 
--static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
--					struct mtd_partition **pparts,
--					struct mtd_part_parser_data *data)
-+static bool node_has_compatible(struct device_node *pp)
-+{
-+	return of_get_property(pp, "compatible", NULL);
-+}
-+
-+static int parse_bcmtag(struct mtd_info *master, struct mtd_partition *pparts,
-+			int next_part, size_t offset, size_t size)
- {
--	/* CFE, NVRAM and global Linux are always present */
--	int nrparts = 3, curpart = 0;
- 	struct bcm_tag *buf;
--	struct mtd_partition *parts;
-+	u32 computed_crc;
- 	int ret;
- 	size_t retlen;
--	unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
--	unsigned int rootfslen, kernellen, sparelen, totallen;
--	unsigned int cfelen, nvramlen;
--	unsigned int cfe_erasesize;
--	unsigned int caldatalen1 = 0, caldataaddr1 = 0;
--	unsigned int caldatalen2 = 0, caldataaddr2 = 0;
--	int i;
--	u32 computed_crc;
-+	unsigned int rootfsaddr, kerneladdr;
-+	unsigned int rootfslen, kernellen, totallen;
- 	bool rootfs_first = false;
--
--	if (!bcm63xx_is_cfe_present())
--		return -EINVAL;
--
--	cfe_erasesize = max_t(uint32_t, master->erasesize,
--			      BCM63XX_CFE_BLOCK_SIZE);
--
--	cfelen = cfe_erasesize;
--	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
--	nvramlen = roundup(nvramlen, cfe_erasesize);
--	nvramaddr = master->size - nvramlen;
--
--	if (data) {
--		if (data->caldata[0]) {
--			caldatalen1 = cfe_erasesize;
--			caldataaddr1 = rounddown(data->caldata[0],
--						 cfe_erasesize);
--		}
--		if (data->caldata[1]) {
--			caldatalen2 = cfe_erasesize;
--			caldataaddr2 = rounddown(data->caldata[1],
--						 cfe_erasesize);
--		}
--		if (caldataaddr1 == caldataaddr2) {
--			caldataaddr2 = 0;
--			caldatalen2 = 0;
--		}
--	}
-+	int curr_part = next_part;
- 
- 	/* Allocate memory for buffer */
--	buf = vmalloc(sizeof(struct bcm_tag));
-+	buf = vmalloc(sizeof(*buf));
- 	if (!buf)
- 		return -ENOMEM;
- 
- 	/* Get the tag */
--	ret = mtd_read(master, cfelen, sizeof(struct bcm_tag), &retlen,
-+	ret = mtd_read(master, offset, sizeof(*buf), &retlen,
- 		       (void *)buf);
- 
--	if (retlen != sizeof(struct bcm_tag)) {
-+	if (retlen != sizeof(*buf)) {
- 		vfree(buf);
--		return -EIO;
-+		return 0;
- 	}
- 
- 	computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
-@@ -121,7 +91,6 @@ static int bcm63xx_parse_cfe_partitions(
- 
- 		kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- 		rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
--		spareaddr = roundup(totallen, master->erasesize) + cfelen;
- 
- 		if (rootfsaddr < kerneladdr) {
- 			/* default Broadcom layout */
-@@ -130,8 +99,8 @@ static int bcm63xx_parse_cfe_partitions(
- 		} else {
- 			/* OpenWrt layout */
- 			rootfsaddr = kerneladdr + kernellen;
--			rootfslen = buf->real_rootfs_length;
--			spareaddr = rootfsaddr + rootfslen;
-+			rootfslen = size - kernellen -
-+				    sizeof(*buf);
- 		}
- 	} else {
- 		pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
-@@ -139,16 +108,153 @@ static int bcm63xx_parse_cfe_partitions(
- 		kernellen = 0;
- 		rootfslen = 0;
- 		rootfsaddr = 0;
--		spareaddr = cfelen;
- 	}
--	sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
- 
--	/* Determine number of partitions */
--	if (rootfslen > 0)
--		nrparts++;
-+	if (kernellen > 0) {
-+		int kernelpart = curr_part;
- 
--	if (kernellen > 0)
--		nrparts++;
-+		if (rootfslen > 0 && rootfs_first)
-+			kernelpart++;
-+		pparts[kernelpart].name = "kernel";
-+		pparts[kernelpart].offset = kerneladdr;
-+		pparts[kernelpart].size = kernellen;
-+		curr_part++;
-+	}
-+
-+	if (rootfslen > 0) {
-+		int rootfspart = curr_part;
-+
-+		if (kernellen > 0 && rootfs_first)
-+			rootfspart--;
-+		pparts[rootfspart].name = "rootfs";
-+		pparts[rootfspart].offset = rootfsaddr;
-+		pparts[rootfspart].size = rootfslen;
-+
-+		curr_part++;
-+	}
-+
-+	vfree(buf);
-+
-+	return curr_part - next_part;
-+}
-+
-+
-+static int bcm63xx_parse_cfe_partitions_of(struct mtd_info *master,
-+					   struct mtd_partition **pparts,
-+					   struct mtd_part_parser_data *data)
-+{
-+	struct device_node *dp = data->of_node;
-+	struct device_node *pp;
-+	int i, nr_parts = 0;
-+	const char *partname;
-+	int len;
-+
-+	for_each_child_of_node(dp, pp) {
-+		if (node_has_compatible(pp))
-+			continue;
-+
-+		if (!of_get_property(pp, "reg", &len))
-+			continue;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+
-+		if (!strcmp(partname, "linux"))
-+			nr_parts += 2;
-+
-+		nr_parts++;
-+	}
-+
-+	*pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL);
-+	if (!*pparts)
-+		return -ENOMEM;
-+
-+	i = 0;
-+	for_each_child_of_node(dp, pp) {
-+		const __be32 *reg;
-+		int a_cells, s_cells;
-+		size_t size, offset;
-+
-+		if (node_has_compatible(pp))
-+			continue;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg)
-+			continue;
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		offset = of_read_number(reg, a_cells);
-+		size = of_read_number(reg + a_cells, s_cells);
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+
-+		if (!strcmp(partname, "linux"))
-+			i += parse_bcmtag(master, *pparts, i, offset, size);
-+
-+		if (of_get_property(pp, "read-only", &len))
-+			(*pparts)[i].mask_flags |= MTD_WRITEABLE;
-+
-+		if (of_get_property(pp, "lock", &len))
-+			(*pparts)[i].mask_flags |= MTD_POWERUP_LOCK;
-+
-+		(*pparts)[i].offset = offset;
-+		(*pparts)[i].size = size;
-+		(*pparts)[i].name = partname;
-+
-+		i++;
-+	}
-+
-+	return i;
-+}
-+
-+static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
-+					struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	/* CFE, NVRAM and global Linux are always present */
-+	int nrparts = 5, curpart = 0;
-+	struct mtd_partition *parts;
-+	unsigned int nvramaddr;
-+	unsigned int cfelen, nvramlen;
-+	unsigned int cfe_erasesize;
-+	unsigned int caldatalen1 = 0, caldataaddr1 = 0;
-+	unsigned int caldatalen2 = 0, caldataaddr2 = 0;
-+	unsigned int imageaddr, imagelen;
-+	int i;
-+
-+	if (!bcm63xx_is_cfe_present())
-+		return -EINVAL;
-+
-+	cfe_erasesize = max_t(uint32_t, master->erasesize,
-+			      BCM63XX_CFE_BLOCK_SIZE);
-+
-+	cfelen = cfe_erasesize;
-+	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
-+	nvramlen = roundup(nvramlen, cfe_erasesize);
-+	nvramaddr = master->size - nvramlen;
-+
-+	if (data) {
-+		if (data->caldata[0]) {
-+			caldatalen1 = cfe_erasesize;
-+			caldataaddr1 = rounddown(data->caldata[0],
-+						 cfe_erasesize);
-+		}
-+		if (data->caldata[1]) {
-+			caldatalen2 = cfe_erasesize;
-+			caldataaddr2 = rounddown(data->caldata[1],
-+						 cfe_erasesize);
-+		}
-+		if (caldataaddr1 == caldataaddr2) {
-+			caldataaddr2 = 0;
-+			caldatalen2 = 0;
-+		}
-+	}
-+
-+	imageaddr = cfelen;
-+	imagelen = min_not_zero(nvramaddr, caldataaddr1) - imageaddr;
- 
- 	if (caldatalen1 > 0)
- 		nrparts++;
-@@ -158,10 +264,8 @@ static int bcm63xx_parse_cfe_partitions(
- 
- 	/* Ask kernel for more memory */
- 	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
--	if (!parts) {
--		vfree(buf);
-+	if (!parts)
- 		return -ENOMEM;
--	}
- 
- 	/* Start building partition list */
- 	parts[curpart].name = "CFE";
-@@ -169,29 +273,7 @@ static int bcm63xx_parse_cfe_partitions(
- 	parts[curpart].size = cfelen;
- 	curpart++;
- 
--	if (kernellen > 0) {
--		int kernelpart = curpart;
--
--		if (rootfslen > 0 && rootfs_first)
--			kernelpart++;
--		parts[kernelpart].name = "kernel";
--		parts[kernelpart].offset = kerneladdr;
--		parts[kernelpart].size = kernellen;
--		curpart++;
--	}
--
--	if (rootfslen > 0) {
--		int rootfspart = curpart;
--
--		if (kernellen > 0 && rootfs_first)
--			rootfspart--;
--		parts[rootfspart].name = "rootfs";
--		parts[rootfspart].offset = rootfsaddr;
--		parts[rootfspart].size = rootfslen;
--		if (sparelen > 0  && !rootfs_first)
--			parts[rootfspart].size += sparelen;
--		curpart++;
--	}
-+	curpart += parse_bcmtag(master, parts, curpart, imageaddr, imagelen);
- 
- 	if (caldatalen1 > 0) {
- 		if (caldatalen2 > 0)
-@@ -217,25 +299,33 @@ static int bcm63xx_parse_cfe_partitions(
- 
- 	/* Global partition "linux" to make easy firmware upgrade */
- 	parts[curpart].name = "linux";
--	parts[curpart].offset = cfelen;
--	parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
-+	parts[curpart].offset = imageaddr;
-+	parts[curpart].size = imagelen;
-+	curpart++;
- 
--	for (i = 0; i < nrparts; i++)
-+	for (i = 0; i < curpart; i++)
- 		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
- 			parts[i].name, parts[i].offset,	parts[i].size);
- 
--	pr_info("Spare partition is offset %x and length %x\n",	spareaddr,
--		sparelen);
--
- 	*pparts = parts;
--	vfree(buf);
- 
- 	return nrparts;
- };
- 
-+
-+static int bcm63xx_parse_partitions(struct mtd_info *master,
-+				    struct mtd_partition **pparts,
-+				    struct mtd_part_parser_data *data)
-+{
-+	if (data && data->of_node)
-+		return bcm63xx_parse_cfe_partitions_of(master, pparts, data);
-+	else
-+		return bcm63xx_parse_cfe_partitions(master, pparts, data);
-+}
-+
- static struct mtd_part_parser bcm63xx_cfe_parser = {
- 	.owner = THIS_MODULE,
--	.parse_fn = bcm63xx_parse_cfe_partitions,
-+	.parse_fn = bcm63xx_parse_partitions,
- 	.name = "bcm63xxpart",
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/426-bcm63xx_enet-fix-napi-poll-return-value.patch b/target/linux/brcm63xx/patches-3.14/426-bcm63xx_enet-fix-napi-poll-return-value.patch
deleted file mode 100644
index af34c23ea4..0000000000
--- a/target/linux/brcm63xx/patches-3.14/426-bcm63xx_enet-fix-napi-poll-return-value.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From d150ac8f353cb1ab59288829db006300120c9daf Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 28 Feb 2015 20:23:13 +0100
-Subject: [PATCH] bcm63xx_enet: fix napi poll return value
-
-Commit d75b1ade567ffab ("net: less interrupt masking in NAPI") changed
-the way how napi treated a returnvalue < budget, which causes hangs when
-there there was tx_work_done, but rx_work_done is less than budget.
-
-To fix this, return budget instead of rx_done to ensure repolling.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -508,7 +508,7 @@ static int bcm_enet_poll(struct napi_str
- 
- 	if (rx_work_done >= budget || tx_work_done > 0) {
- 		/* rx/tx queue is not yet empty/clean */
--		return rx_work_done;
-+		return budget;
- 	}
- 
- 	/* no more packet in rx/tx queue, remove device from poll
diff --git a/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch b/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
deleted file mode 100644
index de2012b16b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/499-allow_better_context_for_board_patches.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -61,7 +61,7 @@ static struct board_info __initdata boar
- 	.ephy_reset_gpio		= 36,
- 	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- 
- /*
-  * known 6328 boards
-@@ -110,7 +110,7 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-  * known 6338 boards
-@@ -199,7 +199,7 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- 
- /*
-  * known 6345 boards
-@@ -211,7 +211,7 @@ static struct board_info __initdata boar
- 
- 	.has_uart0			= 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-  * known 6348 boards
-@@ -524,7 +524,7 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-  * known 6358 boards
-@@ -677,7 +677,7 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0			= 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-  * all boards
diff --git a/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
deleted file mode 100644
index e00e56499e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -524,6 +524,22 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+	.name				= "D-4P-W",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+	.has_uart0 			= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-@@ -705,6 +721,7 @@ static const struct board_info __initcon
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
-+	&board_96348_D4PW,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -736,6 +753,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- 	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+	{ .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- 	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
deleted file mode 100644
index 97a9c73f85..0000000000
--- a/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -693,6 +693,62 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0			= 1,
- };
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+	.name				= "NB4-SER-r0",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports			= 2,
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+	.name				= "NB4-FXC-r1",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports			= 2,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-@@ -729,6 +785,8 @@ static const struct board_info __initcon
- 	&board_96358vw2,
- 	&board_AGPFS0,
- 	&board_DWVS0,
-+	&board_nb4_ser_r0,
-+	&board_nb4_fxc_r1,
- #endif
- };
- 
-@@ -770,6 +828,8 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+	{ .compatible = "sfr,nb4-ser-r0", .data = &board_nb4_ser_r0, },
-+	{ .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
deleted file mode 100644
index cfdf03ec7e..0000000000
--- a/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -199,6 +199,20 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+	.name				= "96338W2_E7T",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- 
- /*
-@@ -764,6 +778,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
- 	&board_96338w,
-+	&board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
-@@ -801,6 +816,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
- 	{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+	{ .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
deleted file mode 100644
index c17b8e45be..0000000000
--- a/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -663,6 +663,26 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_CPVA642 = {
-+	.name                           = "CPVA642",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+ 	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
- 	.name				= "AGPF-S0",
- 	.expected_cpu_id		= 0x6358,
-@@ -799,6 +819,7 @@ static const struct board_info __initcon
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
-+	&board_CPVA642,
- 	&board_DWVS0,
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
-@@ -846,6 +867,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
- 	{ .compatible = "sfr,nb4-ser-r0", .data = &board_nb4_ser_r0, },
- 	{ .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
-+	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644
index 63c891be1a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -728,6 +728,23 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- };
- 
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+	.name				= "AW4139",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_nb4_ser_r0 = {
- 	.name				= "NB4-SER-r0",
- 	.expected_cpu_id		= 0x6358,
-@@ -821,6 +838,7 @@ static const struct board_info __initcon
- 	&board_AGPFS0,
- 	&board_CPVA642,
- 	&board_DWVS0,
-+	&board_dsl_274xb_rev_c,
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
- #endif
-@@ -860,6 +878,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
- 	{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
- 	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
deleted file mode 100644
index 8919e88748..0000000000
--- a/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -554,6 +554,45 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- };
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+	{ .offset = 46, .value = 0x3046 },
-+	{ .offset = 47, .value = 0x15a7 },
-+	{ .offset = 48, .value = 0xfa89 },
-+	{ .offset = 49, .value = 0xfe79 },
-+	{ .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+	.name				= "SPW500V",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.fallback_sprom = {
-+		.type			= SPROM_BCM4318,
-+		.pci_bus		= 0,
-+		.pci_dev		= 1,
-+		.board_fixups		= spw500v_fixups,
-+		.num_board_fixups	= ARRAY_SIZE(spw500v_fixups),
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-@@ -830,6 +869,7 @@ static const struct board_info __initcon
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
-+	&board_spw500v,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -871,6 +911,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- 	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
- 	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
-+	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
- 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- 	{ .compatible = "usr,9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
deleted file mode 100644
index 8785db796a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -451,6 +451,66 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_gw6200 = {
-+	.name				= "GW6200",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+		.dsp = {
-+		.gpio_rst		= 8, /* FIXME: What is real GPIO here? */
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+	.name				= "GW6000",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- 	.name				= "F@ST2404",
- 	.expected_cpu_id		= 0x6348,
-@@ -862,6 +922,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
- 	&board_96348gw,
-+	&board_gw6000,
-+	&board_gw6200,
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,
-@@ -912,6 +974,8 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
- 	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
- 	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
-+	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
- 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- 	{ .compatible = "usr,9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
deleted file mode 100644
index 1d513ab3e4..0000000000
--- a/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -653,6 +653,40 @@ static struct board_info __initdata boar
- 		.num_board_fixups	= ARRAY_SIZE(spw500v_fixups),
- 	},
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+	.name				= "MAGIC",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		/* it has BP_ENET_EXTERNAL_PHY */
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 25,
-+		.gpio_int		= 34,
-+		.cs			= 2,
-+		.ext_irq		= 2,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-@@ -932,6 +966,7 @@ static const struct board_info __initcon
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
- 	&board_spw500v,
-+	&board_96348sv,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -976,6 +1011,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
- 	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
- 	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+	{ .compatible = "telsey,magic", .data = &board_96348sv, },
- 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- 	{ .compatible = "usr,9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
deleted file mode 100644
index db0e7413fa..0000000000
--- a/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -933,6 +933,34 @@ static struct board_info __initdata boar
- 	.has_ehci0 = 1,
- 	.num_usbh_ports			= 2,
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+	.name                           = "HW553",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+	.use_fallback_sprom		= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+	.num_usbh_ports			= 2,
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-@@ -978,6 +1006,7 @@ static const struct board_info __initcon
- 	&board_dsl_274xb_rev_c,
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
-+	&board_HW553,
- #endif
- };
- 
-@@ -1021,6 +1050,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
- 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+	{ .compatible = "huawei,hg553", .data = &board_HW553, },
- 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
deleted file mode 100644
index 9ca684477b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -213,6 +213,21 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+	.name				= "RTA1320_16M",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- 
- /*
-@@ -977,6 +992,7 @@ static const struct board_info __initcon
- 	&board_96338gw,
- 	&board_96338w,
- 	&board_96338w2_e7t,
-+	&board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
-@@ -1021,6 +1037,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
- 	{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+	{ .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
- 	{ .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
deleted file mode 100644
index 1e6da541e5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -976,6 +976,21 @@ static struct board_info __initdata boar
- 		.pci_dev			= 1,
- 	},
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+	.name			= "96358-502V",
-+	.expected_cpu_id	= 0x6358,
-+
-+	.has_uart0		= 1,
-+	.has_enet0		= 1,
-+	.has_pci		= 1,
-+
-+	.enet0 = {
-+		.has_phy 		= 1,
-+		.use_internal_phy 	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-@@ -1023,6 +1038,7 @@ static const struct board_info __initcon
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
- 	&board_HW553,
-+	&board_spw303v,
- #endif
- };
- 
-@@ -1074,6 +1090,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
- 	{ .compatible = "sfr,nb4-ser-r0", .data = &board_nb4_ser_r0, },
- 	{ .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
-+	{ .compatible = "t-com,spw303v", .data = &board_spw303v, },
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
deleted file mode 100644
index 60fe53cb19..0000000000
--- a/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -702,6 +702,27 @@ static struct board_info __initdata boar
- 		.ext_irq		= 2,
- 	},
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+	.name				= "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_uart0                      = 1,
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- 
- /*
-@@ -1026,6 +1047,7 @@ static const struct board_info __initcon
- 	&board_96348_D4PW,
- 	&board_spw500v,
- 	&board_96348sv,
-+	&board_V2500V_BB,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1065,6 +1087,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- 	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+	{ .compatible = "bt,v2500v-bb", .data = &board_V2500V_BB, },
- 	{ .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -1124,6 +1147,22 @@ void __init board_bcm963xx_init(void)
- 		val &= MPI_CSBASE_BASE_MASK;
- 	}
- 	boot_addr = (u8 *)KSEG1ADDR(val);
-+	printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+	/* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+	/* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+	/* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+	/* Do an early check of CFE and then select bank 0 */
-+
-+	if (boot_addr == (u8 *)0xbf800000) {
-+		u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+		bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+		if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+			printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+			boot_addr = tmp_boot_addr;
-+		}
-+	}
- 
- 	/* dump cfe version */
- 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
- 
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_hsspi.h>
-@@ -220,6 +221,13 @@ int __init bcm63xx_flash_register(int nu
- 			val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- 			val &= MPI_CSBASE_BASE_MASK;
- 
-+			/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+			/* Loading from CFE always uses Bank 0 */
-+			if (!strcmp(board_get_name(), "V2500V_BB")) {
-+				pr_info("V2500V: Start in Bank 0\n");
-+				val = val + 0x400000; // Select Bank 0 start address
-+			}
-+
- 			mtd_resources[0].start = val;
- 			mtd_resources[0].end = 0x1FFFFFFF;
- 		}
diff --git a/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
deleted file mode 100644
index 8283174775..0000000000
--- a/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -407,6 +407,25 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+	.name				= "V2110",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -1048,6 +1067,7 @@ static const struct board_info __initcon
- 	&board_spw500v,
- 	&board_96348sv,
- 	&board_V2500V_BB,
-+	&board_V2110,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
deleted file mode 100644
index 3842f7b9ce..0000000000
--- a/target/linux/brcm63xx/patches-3.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:55:52 +0100
-Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
-
----
- arch/mips/bcm63xx/boards/Kconfig         |    6 +
- arch/mips/bcm63xx/boards/Makefile        |    1 +
- arch/mips/bcm63xx/boards/board_common.c  |    2 +-
- arch/mips/bcm63xx/boards/board_common.h  |    6 +
- arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
- 5 files changed, 229 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -12,4 +12,10 @@ config BOARD_BCM963XX
- 	default y
-        help
- 
-+config BOARD_LIVEBOX
-+	bool "Inventel Livebox(es) boards"
-+	select SSB
-+	help
-+	  Inventel Livebox boards using the RedBoot bootloader.
-+
- endmenu
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,2 +1,3 @@
- obj-y					+= board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -61,7 +61,7 @@ void __init board_prom_init(void)
- 	if (fw_arg3 == CFE_EPTSEAL)
- 		board_bcm963xx_init();
- 	else
--		panic("unsupported bootloader detected");
-+		board_livebox_init();
- }
- 
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -24,4 +24,10 @@ static inline void board_of_device_prese
- }
- #endif
- 
-+#if defined(CONFIG_BOARD_LIVEBOX)
-+void board_livebox_init(void);
-+#else
-+static inline void board_livebox_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,164 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <board_bcm963xx.h>
-+
-+#include "board_common.h"
-+
-+#define PFX	"board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+	.name				= "Livebox-blue-5g",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		  .has_phy		= 1,
-+		  .phy_id 		= 31,
-+	},
-+
-+	.ephy_reset_gpio		= 6,
-+	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+
-+	.has_dsp			= 0, /*TODO some Liveboxes have dsp*/
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 35,
-+		.cs			= 2,
-+		.ext_irq		= 2,
-+	},
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox_blue5g
-+#endif
-+};
-+
-+static struct of_device_id const livebox_boards_dt[] = {
-+	{ .compatible = "inventel,livebox-blue-5g", .data = &board_livebox_blue5g, },
-+	{ }
-+};
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int livebox_get_mac_address(u8 *mac)
-+{
-+	u8 *p;
-+	int count;
-+
-+	memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+        mac_addr_used++;
-+
-+	return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
-+#define LIVEBOX_BOOT_ADDR		0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9		0x90
-+
-+void __init board_livebox_init(void)
-+{
-+	u32 val;
-+	u8 hw_version;
-+	const struct board_info *board;
-+	const struct of_device_id *board_match;
-+
-+	/* find board by compat */
-+	board_match = bcm63xx_match_board(livebox_boards_dt);
-+	if (board_match) {
-+		board = board_match->data;
-+	} else {
-+		/* Get hardware version */
-+		val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+		val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+		bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+		hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+		hw_version &= LIVEBOX_GPIO_DETECT_MASK;
-+
-+		switch (hw_version) {
-+		case LIVEBOX_HW_BLUE5G_9:
-+			printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+			board = bcm963xx_boards[0];
-+			break;
-+		default:
-+			printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
-+			       hw_version);
-+			/* use default livebox configuration */
-+			board = bcm963xx_boards[0];
-+			break;
-+		}
-+	}
-+
-+	/* use default livebox configuration */
-+	board_early_setup(board, livebox_get_mac_address);
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+	if (val != LIVEBOX_BOOT_ADDR) {
-+		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+			val, LIVEBOX_BOOT_ADDR);
-+		bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
-+	}
-+}
diff --git a/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
deleted file mode 100644
index 41e9620f19..0000000000
--- a/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -426,6 +426,34 @@ static struct board_info __initdata boar
- };
- 
- 
-+static struct board_info __initdata board_ct536_ct5621 = {
-+	.name				= "CT536_CT5621",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 0,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -1068,6 +1096,7 @@ static const struct board_info __initcon
- 	&board_96348sv,
- 	&board_V2500V_BB,
- 	&board_V2110,
-+	&board_ct536_ct5621,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1108,6 +1137,8 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
- 	{ .compatible = "bt,v2500v-bb", .data = &board_V2500V_BB, },
-+	{ .compatible = "comtrend,ct-536+", .data = &board_ct536_ct5621, },
-+	{ .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
- 	{ .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
deleted file mode 100644
index 820a1e495b..0000000000
--- a/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -926,6 +926,8 @@ static struct board_info __initdata boar
- 	.name				= "DWV-S0",
- 	.expected_cpu_id		= 0x6358,
- 
-+	.has_uart0			= 1,
-+
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
-@@ -942,6 +944,7 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
- };
- 
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
deleted file mode 100644
index b90c6086bb..0000000000
--- a/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -454,6 +454,31 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96348A_122 = {
-+	.name				= "96348A-122",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -1100,6 +1125,7 @@ static const struct board_info __initcon
- 	&board_V2500V_BB,
- 	&board_V2110,
- 	&board_ct536_ct5621,
-+	&board_96348A_122,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1141,6 +1167,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
- 	{ .compatible = "bt,v2500v-bb", .data = &board_V2500V_BB, },
- 	{ .compatible = "comtrend,ct-536+", .data = &board_ct536_ct5621, },
-+	{ .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
- 	{ .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
- 	{ .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
deleted file mode 100644
index af5b4837b8..0000000000
--- a/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -627,6 +627,7 @@ static struct board_info __initdata boar
- 	.name				= "RTA1025W_16",
- 	.expected_cpu_id		= 0x6348,
- 
-+	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.has_enet1			= 1,
- 	.has_pci			= 1,
diff --git a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
deleted file mode 100644
index 1eed2c15c0..0000000000
--- a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -425,6 +425,27 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_CPVA502plus = {
-+	.name				= "CPVA502+",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+	},
-+
-+	.ephy_reset_gpio		= 4,
-+	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
-+};
- 
- static struct board_info __initdata board_ct536_ct5621 = {
- 	.name				= "CT536_CT5621",
-@@ -1127,6 +1148,7 @@ static const struct board_info __initcon
- 	&board_V2110,
- 	&board_ct536_ct5621,
- 	&board_96348A_122,
-+	&board_CPVA502plus,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1178,6 +1200,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
- 	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
- 	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+	{ .compatible = "telsey,cpva502+", .data = &board_CPVA502plus, },
- 	{ .compatible = "telsey,magic", .data = &board_96348sv, },
- 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- 	{ .compatible = "usr,9108", .data = &board_96348gw_a, },
diff --git a/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644
index 86d29cbda0..0000000000
--- a/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1112,6 +1112,59 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+	.name				= "96368MVWG",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+
-+	.has_usbd			= 1,
-+
-+	.usbd = {
-+		.use_fullspeed		= 0,
-+		.port_no		= 0,
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "port1",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "port2",
-+			},
-+
-+			[4] = {
-+				.used	= 1,
-+				.phy_id	= 0x12,
-+				.name	= "port0",
-+			},
-+
-+			[5] = {
-+				.used	= 1,
-+				.phy_id	= 0x11,
-+				.name	= "port3",
-+			},
-+		},
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1163,6 +1216,10 @@ static const struct board_info __initcon
- 	&board_HW553,
- 	&board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+	&board_96368mvwg,
-+#endif
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -1222,6 +1279,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -88,12 +88,25 @@ void __init board_early_setup(const stru
- 		bcm63xx_pci_enabled = 1;
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G2_PCI;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCI_REQ1 |
-+				GPIO_MODE_6368_PCI_GNT1 |
-+				GPIO_MODE_6368_PCI_INTB |
-+				GPIO_MODE_6368_PCI_REQ0 |
-+				GPIO_MODE_6368_PCI_GNT0;
- 	}
- #endif
- 
- 	if (board.has_pccard) {
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+		if (BCMCPU_IS_6368())
-+			val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+				GPIO_MODE_6368_PCMCIA_CD2 |
-+				GPIO_MODE_6368_PCMCIA_VS1 |
-+				GPIO_MODE_6368_PCMCIA_VS2;
- 	}
- 
- 	if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644
index 433fdb63fe..0000000000
--- a/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1162,6 +1162,46 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+	.name				= "96368MVNgr",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "port1",
-+			},
-+
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "port2",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "port3",
-+			},
-+
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "port4",
-+			},
-+		},
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- 
- /*
-@@ -1219,6 +1259,7 @@ static const struct board_info __initcon
- 
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
-+	&board_96368mvngr,
- #endif
- };
- 
-@@ -1279,6 +1320,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644
index 5ca3954797..0000000000
--- a/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -109,6 +109,33 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
diff --git a/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644
index 9cc376229a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -137,6 +137,41 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+	.name				= "963281TAN",
-+	.expected_cpu_id		= 0x6328,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-@@ -1240,6 +1275,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
-@@ -1296,6 +1332,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644
index 0428abe879..0000000000
--- a/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -172,6 +172,51 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+	.name				= "AW4339U",
-+	.expected_cpu_id		= 0x6328,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+
-+	.has_caldata			= 1,
-+	.caldata = {
-+		{
-+			.vendor		= PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset	= 0x7d1000,
-+			.slot		= 0,
-+			.led_pin	= -1,
-+		},
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 4",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 3",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 2",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 1",
-+			},
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-@@ -1276,6 +1321,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
- 	&board_963281TAN,
-+	&board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
-@@ -1334,6 +1380,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
deleted file mode 100644
index fade962bfb..0000000000
--- a/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -815,6 +815,25 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- };
- 
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+ 	.name	 			= "96348W3",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0	 		= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0	 		= 1,
-+};
-+
- static struct board_info __initdata board_96348_D4PW = {
- 	.name				= "D-4P-W",
- 	.expected_cpu_id		= 0x6348,
-@@ -1351,6 +1370,7 @@ static const struct board_info __initcon
- 	&board_ct536_ct5621,
- 	&board_96348A_122,
- 	&board_CPVA502plus,
-+	&board_96348W3,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1405,6 +1425,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- 	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
-+ 	{ .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
- 	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
- 	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
- 	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
deleted file mode 100644
index 5c2dabe5b1..0000000000
--- a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1193,6 +1193,31 @@ static struct board_info __initdata boar
- 	.num_usbh_ports			= 2,
- };
- 
-+static struct board_info __initdata board_ct6373_1 = {
-+	.name				= "CT6373-1",
-+	.expected_cpu_id	= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_enet1			= 1,
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_HW553 = {
- 	.name                           = "HW553",
- 	.expected_cpu_id                = 0x6358,
-@@ -1382,6 +1407,7 @@ static const struct board_info __initcon
- 	&board_dsl_274xb_rev_c,
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
-+	&board_ct6373_1,
- 	&board_HW553,
- 	&board_spw303v,
- #endif
-@@ -1439,6 +1465,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
- 	{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
- 	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+	{ .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
- 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- 	{ .compatible = "huawei,hg553", .data = &board_HW553, },
diff --git a/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644
index 8e3a6eb2da..0000000000
--- a/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1260,6 +1260,36 @@ static struct board_info __initdata boar
- 		.use_internal_phy 	= 1,
- 	},
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+	.name			= "DVAG3810BN",
-+	.expected_cpu_id	= 0x6358,
-+
-+	.has_uart0		= 1,
-+	.has_enet0		= 1,
-+	.has_enet1		= 1,
-+	.has_pci		= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 0,
-+		.use_internal_phy	= 1,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0		= 1,
-+	.has_pccard		= 1,
-+	.has_ehci0		= 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
- /*
-@@ -1410,6 +1440,7 @@ static const struct board_info __initcon
- 	&board_ct6373_1,
- 	&board_HW553,
- 	&board_spw303v,
-+	&board_DVAG3810BN,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1468,6 +1499,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
- 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+	{ .compatible = "d-link,dva-g3810bn/tl", .data = &board_DVAG3810BN, },
- 	{ .compatible = "huawei,hg553", .data = &board_HW553, },
- 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
deleted file mode 100644
index c77b018368..0000000000
--- a/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
+++ /dev/null
@@ -1,112 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,8 @@
- #include <linux/string.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/platform_device.h>
-+#include <linux/rtl8367.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -31,6 +33,9 @@
- #define BCM963XX_KEYS_POLL_INTERVAL	20
- #define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
- 
-+#define NB6_GPIO_RTL8367_SDA	18
-+#define NB6_GPIO_RTL8367_SCK	20
-+
- /*
-  * known 3368 boards
-  */
-@@ -1292,6 +1297,69 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- 
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
-+	.mode = RTL8367_EXTIF_MODE_RGMII,
-+	.txdelay = 1,
-+	.rxdelay = 5,
-+	.ability = {
-+		.force_mode = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+		.link = 1,
-+		.duplex = 1,
-+		.speed = RTL8367_PORT_SPEED_1000,
-+	},
-+};
-+
-+static struct rtl8367_platform_data nb6_rtl8367_data = {
-+	.gpio_sda	= NB6_GPIO_RTL8367_SDA,
-+	.gpio_sck	= NB6_GPIO_RTL8367_SCK,
-+	.extif0_cfg	= &nb6_rtl8367_extif0_cfg,
-+};
-+
-+static struct platform_device nb6_rtl8367_device = {
-+	.name		= RTL8367_DRIVER_NAME,
-+	.id		= -1,
-+	.dev = {
-+		.platform_data	= &nb6_rtl8367_data,
-+	}
-+};
-+
-+static struct platform_device * __initdata nb6_devices[] = {
-+	&nb6_rtl8367_device,
-+};
-+
-+static struct board_info __initdata board_nb6 = {
-+	.name				= "NB6",
-+	.expected_cpu_id		= 0x6362,
-+
-+	.has_uart0			= 1,
-+
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 2,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used	= 1,
-+				.phy_id	= 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name	= "RGMII",
-+			},
-+		},
-+	},
-+
-+	.devs = nb6_devices,
-+	.num_devs = ARRAY_SIZE(nb6_devices),
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
-  * known 6368 boards
-  */
-@@ -1443,6 +1511,10 @@ static const struct board_info __initcon
- 	&board_DVAG3810BN,
- #endif
- 
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+	&board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
- 	&board_96368mvngr,
-@@ -1510,6 +1582,9 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "t-com,spw303v", .data = &board_spw303v, },
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+	{ .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
deleted file mode 100644
index 0cfe941af5..0000000000
--- a/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -756,6 +756,23 @@ static struct board_info __initdata boar
- 	.has_ehci0			= 1,
- };
- 
-+static struct board_info __initdata board_FAST2604 = {
-+	.name						= "F@ST2604",
-+	.expected_cpu_id			= 0x6348,
-+
-+	.has_uart0					= 1,
-+	.has_pci					= 1,
-+	.has_ohci0					= 1,
-+
-+	.has_enet1					= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
- 	.name				= "RTA1025W_16",
- 	.expected_cpu_id		= 0x6348,
-@@ -1482,6 +1499,7 @@ static const struct board_info __initcon
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,
-+	&board_FAST2604,
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
-@@ -1556,6 +1574,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
-  	{ .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
- 	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
-+ 	{ .compatible = "sagem,f@st2604", .data = &board_FAST2604, },
- 	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
- 	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
- 	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/brcm63xx/patches-3.14/530-board_A4001N1.patch b/target/linux/brcm63xx/patches-3.14/530-board_A4001N1.patch
deleted file mode 100644
index 95d259516a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/530-board_A4001N1.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -178,6 +178,50 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_A4001N1 = {
-+	.name					= "963281T_TEF",
-+	.expected_cpu_id			= 0x6328,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 1,
-+	.has_enetsw				= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "Port 1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "Port 2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "Port 3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43225,
-+		.pci_bus			= 1,
-+		.pci_dev			= 0,
-+	},
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
- 	.name				= "AW4339U",
- 	.expected_cpu_id		= 0x6328,
-@@ -1480,6 +1524,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
- 	&board_963281TAN,
-+	&board_A4001N1,
- 	&board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1545,6 +1590,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/brcm63xx/patches-3.14/531-board_AR-5387un.patch b/target/linux/brcm63xx/patches-3.14/531-board_AR-5387un.patch
deleted file mode 100644
index 4b516574fa..0000000000
--- a/target/linux/brcm63xx/patches-3.14/531-board_AR-5387un.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -143,6 +143,79 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+	{ .offset = 2, .value = 0x05bb },
-+	{ .offset = 65, .value = 0x1204 },
-+	{ .offset = 78, .value = 0x0303 },
-+	{ .offset = 79, .value = 0x0202 },
-+	{ .offset = 80, .value = 0xff02 },
-+	{ .offset = 87, .value = 0x0315 },
-+	{ .offset = 88, .value = 0x0315 },
-+	{ .offset = 96, .value = 0x2048 },
-+	{ .offset = 97, .value = 0xff11 },
-+	{ .offset = 98, .value = 0x1567 },
-+	{ .offset = 99, .value = 0xfb24 },
-+	{ .offset = 100, .value = 0x3e3c },
-+	{ .offset = 101, .value = 0x4038 },
-+	{ .offset = 102, .value = 0xfe7f },
-+	{ .offset = 103, .value = 0x1279 },
-+	{ .offset = 112, .value = 0x2048 },
-+	{ .offset = 113, .value = 0xff03 },
-+	{ .offset = 114, .value = 0x154c },
-+	{ .offset = 115, .value = 0xfb27 },
-+	{ .offset = 116, .value = 0x3e3c },
-+	{ .offset = 117, .value = 0x4038 },
-+	{ .offset = 118, .value = 0xfe87 },
-+	{ .offset = 119, .value = 0x1233 },
-+	{ .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+	.name					= "96328A-1441N1",
-+	.expected_cpu_id			= 0x6328,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 1,
-+	.has_enetsw				= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "Port 1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "Port 2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "Port 3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43225,
-+		.pci_bus			= 1,
-+		.pci_dev			= 0,
-+		.board_fixups			= ar5387un_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(ar5387un_fixups),
-+	},
-+};
-+
- static struct board_info __initdata board_963281TAN = {
- 	.name				= "963281TAN",
- 	.expected_cpu_id		= 0x6328,
-@@ -1523,6 +1596,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_AR5387un,
- 	&board_963281TAN,
- 	&board_A4001N1,
- 	&board_dsl_274xb_f1,
-@@ -1593,6 +1667,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.14/532-board_AR-5381u.patch b/target/linux/brcm63xx/patches-3.14/532-board_AR-5381u.patch
deleted file mode 100644
index 7ad4e56e44..0000000000
--- a/target/linux/brcm63xx/patches-3.14/532-board_AR-5381u.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -143,6 +143,61 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+	{ .offset = 97, .value = 0xfee5 },
-+	{ .offset = 98, .value = 0x157c },
-+	{ .offset = 99, .value = 0xfae7 },
-+	{ .offset = 113, .value = 0xfefa },
-+	{ .offset = 114, .value = 0x15d6 },
-+	{ .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+	.name					= "96328A-1241N",
-+	.expected_cpu_id			= 0x6328,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.use_fallback_sprom			= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 1,
-+	.has_enetsw				= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "Port 1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "Port 2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "Port 3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43225,
-+		.pci_bus			= 1,
-+		.pci_dev			= 0,
-+		.board_fixups			= ar5381u_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(ar5381u_fixups),
-+	},
-+};
-+
- static struct sprom_fixup __initdata ar5387un_fixups[] = {
- 	{ .offset = 2, .value = 0x05bb },
- 	{ .offset = 65, .value = 0x1204 },
-@@ -1596,6 +1651,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_AR5381u,
- 	&board_AR5387un,
- 	&board_963281TAN,
- 	&board_A4001N1,
-@@ -1667,6 +1723,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+	{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
- 	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
- #endif
diff --git a/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
deleted file mode 100644
index 96e2f6a036..0000000000
--- a/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -524,6 +524,22 @@ static struct board_info __initdata boar
- 
- 	.has_uart0			= 1,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+	.name				= "RTA770BW",
-+	.expected_cpu_id		= 0x6345,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-@@ -1665,6 +1681,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
-+	&board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
-@@ -1735,6 +1752,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+	{ .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch b/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
deleted file mode 100644
index 76b9faf972..0000000000
--- a/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/pci_ids.h>
- #include <linux/platform_device.h>
- #include <linux/rtl8367.h>
- #include <asm/addrspace.h>
-@@ -1456,6 +1457,93 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_HW556_C = {
-+	.name					= "HW556_C",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 2,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_RALINK,
-+			.caldata_offset		= 0xeffe00,
-+			.slot			= 1,
-+			.eeprom			= "rt2x00.eeprom",
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+};
-+static struct board_info __initdata board_HW556_A = {
-+	.name					= "HW556_A",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 2,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset		= 0xf7e000,
-+			.slot			= 1,
-+			.endian_check		= 1,
-+			.led_pin		= 2,
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+};
-+static struct board_info __initdata board_HW556_B = {
-+	.name					= "HW556_B",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.num_usbh_ports				= 2,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset		= 0xefe000,
-+			.slot			= 1,
-+			.endian_check		= 1,
-+			.led_pin		= 2,
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
- 	.name			= "96358-502V",
-@@ -1717,6 +1805,9 @@ static const struct board_info __initcon
- 	&board_nb4_fxc_r1,
- 	&board_ct6373_1,
- 	&board_HW553,
-+	&board_HW556_A,
-+	&board_HW556_B,
-+	&board_HW556_C,
- 	&board_spw303v,
- 	&board_DVAG3810BN,
- #endif
-@@ -1788,6 +1879,9 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- 	{ .compatible = "d-link,dva-g3810bn/tl", .data = &board_DVAG3810BN, },
- 	{ .compatible = "huawei,hg553", .data = &board_HW553, },
-+	{ .compatible = "huawei,hg556a-a", .data = &board_HW556_A, },
-+	{ .compatible = "huawei,hg556a-b", .data = &board_HW556_B, },
-+	{ .compatible = "huawei,hg556a-c", .data = &board_HW556_C, },
- 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- 	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
deleted file mode 100644
index f9ce5bed56..0000000000
--- a/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -541,6 +541,27 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+	.name				= "RTA770W",
-+	.expected_cpu_id		= 0x6345,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-@@ -1770,6 +1791,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
- 	&board_rta770bw,
-+	&board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
-@@ -1844,6 +1866,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
- 	{ .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
-+	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
deleted file mode 100644
index 34b02f5ec0..0000000000
--- a/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -395,6 +395,44 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+	.name				= "F@ST2704V2",
-+	.expected_cpu_id		= 0x6328,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.has_usbd			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- 
- /*
-@@ -1781,6 +1819,7 @@ static const struct board_info __initcon
- 	&board_963281TAN,
- 	&board_A4001N1,
- 	&board_dsl_274xb_f1,
-+	&board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
-@@ -1856,6 +1895,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
- 	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
-+	{ .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
deleted file mode 100644
index 0db9a2e500..0000000000
--- a/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Max Staudt <openwrt.max@enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max@enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1710,6 +1710,43 @@ static struct board_info __initdata boar
- 	.devs = nb6_devices,
- 	.num_devs = ARRAY_SIZE(nb6_devices),
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+	.name				= "F@ST2504n",
-+	.expected_cpu_id		= 0x6362,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "Port 1",
-+			},
-+
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- 
- /*
-@@ -1875,6 +1912,7 @@ static const struct board_info __initcon
- 
- #ifdef CONFIG_BCM63XX_CPU_6362
- 	&board_nb6,
-+	&board_fast2504n,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1955,6 +1993,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-+	{ .compatible = "sagem,f@st2504n", .data = &board_fast2504n, },
- 	{ .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/550-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/brcm63xx/patches-3.14/550-MIPS-BCM63XX-remove-leds-and-buttons.patch
deleted file mode 100644
index 8ff7d5b8d9..0000000000
--- a/target/linux/brcm63xx/patches-3.14/550-MIPS-BCM63XX-remove-leds-and-buttons.patch
+++ /dev/null
@@ -1,343 +0,0 @@
-From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Feb 2015 17:52:32 +0100
-Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
- 1 file changed, 262 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -56,14 +56,6 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 
--	.leds = {
--		{
--			.name		= "CVG834G:green:power",
--			.gpio		= 37,
--			.default_trigger= "default-on",
--		},
--	},
--
- 	.ephy_reset_gpio		= 36,
- 	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
- };
-@@ -87,35 +79,6 @@ static struct board_info __initdata boar
- 		.port_no		= 0,
- 	},
- 
--	.leds = {
--		{
--			.name		= "96328avng::ppp-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::power",
--			.gpio		= 4,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "96328avng::power-fail",
--			.gpio		= 8,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::wps",
--			.gpio		= 9,
--			.active_low	= 1,
--		},
--		{
--			.name		= "96328avng::ppp",
--			.gpio		= 11,
--			.active_low	= 1,
--		},
--	},
--
- 	.has_enetsw			= 1,
- 
- 	.enetsw = {
-@@ -451,35 +414,6 @@ static struct board_info __initdata boar
- 	},
- 
- 	.has_ohci0			= 1,
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ses",
--			.gpio		= 5,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		}
--	},
- };
- 
- static struct board_info __initdata board_96338w = {
-@@ -492,35 +426,6 @@ static struct board_info __initdata boar
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ses",
--			.gpio		= 5,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96338w2_e7t = {
-@@ -619,36 +524,6 @@ static struct board_info __initdata boar
- 		.has_phy		= 1,
- 		.use_internal_phy	= 1,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96348gw_10 = {
-@@ -681,35 +556,6 @@ static struct board_info __initdata boar
- 		.cs			= 2,
- 		.ext_irq		= 2,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96348gw_11 = {
-@@ -736,35 +582,6 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- 
-@@ -888,35 +705,6 @@ static struct board_info __initdata boar
- 		.ext_irq		= 2,
- 		.cs			= 2,
- 	},
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 2,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 3,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 0,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 1,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_gw6200 = {
-@@ -1243,33 +1031,6 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
--
--	.leds = {
--		{
--			.name		= "adsl-fail",
--			.gpio		= 15,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp",
--			.gpio		= 22,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 23,
--			.active_low	= 1,
--		},
--		{
--			.name		= "power",
--			.gpio		= 4,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 5,
--		},
--	},
- };
- 
- static struct board_info __initdata board_96358vw2 = {
-@@ -1297,29 +1058,6 @@ static struct board_info __initdata boar
- 	.has_pccard = 1,
- 	.has_ehci0 = 1,
- 	.num_usbh_ports			= 2,
--
--	.leds = {
--		{
--			.name		= "adsl",
--			.gpio		= 22,
--			.active_low	= 1,
--		},
--		{
--			.name		= "ppp-fail",
--			.gpio		= 23,
--		},
--		{
--			.name		= "power",
--			.gpio		= 5,
--			.active_low	= 1,
--			.default_trigger = "default-on",
--		},
--		{
--			.name		= "stop",
--			.gpio		= 4,
--			.active_low	= 1,
--		},
--	},
- };
- 
- static struct board_info __initdata board_CPVA642 = {
diff --git a/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
deleted file mode 100644
index 2bb7d72655..0000000000
--- a/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -423,6 +423,10 @@ static struct board_info __initdata boar
- 	.has_uart0			= 1,
- 	.has_enet0			= 1,
- 	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -541,6 +545,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -574,6 +580,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -721,6 +729,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -783,6 +793,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -824,6 +836,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -846,6 +860,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -866,6 +882,8 @@ static struct board_info __initdata boar
- 		.use_internal_phy	= 1,
- 	},
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -1049,6 +1067,8 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
-@@ -1120,6 +1140,12 @@ static struct board_info __initdata boar
- 	},
- 
- 	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.has_phy		= 1,
-+		.phy_id			= 0,
- 		.force_speed_100	= 1,
- 		.force_duplex_full	= 1,
- 	},
diff --git a/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch b/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
deleted file mode 100644
index 76ae147449..0000000000
--- a/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
+++ /dev/null
@@ -1,106 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -62,6 +62,93 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- 
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+	.name				= "96318REF",
-+	.expected_cpu_id		= 0x6318,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+
-+	.has_usbd			= 1,
-+
-+	.usbd = {
-+		.use_fullspeed		= 0,
-+		.port_no		= 0,
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "96318REF:red:post-failed",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "96318REF:green:inet",
-+			.gpio		= 8,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "96318REF:red:inet-fail",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "wps",
-+			.gpio			= 33,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WPS_BUTTON,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 34,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -1613,6 +1700,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
- 	&board_cvg834g,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+	&board_96318ref,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
- 	&board_AR5381u,
diff --git a/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
deleted file mode 100644
index e8e69b3118..0000000000
--- a/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -146,6 +146,94 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+	.name				= "96318REF_P300",
-+	.expected_cpu_id		= 0x6318,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+
-+	.has_usbd			= 1,
-+
-+	.usbd = {
-+		.use_fullspeed		= 0,
-+		.port_no		= 0,
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "96318REF_P300:red:post-failed",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "96318REF_P300:green:inet",
-+			.gpio		= 8,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "96318REF_P300:red:inet-fail",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "96318REF_P300::usb-pwron",
-+			.gpio		= 13,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "wps",
-+			.gpio			= 33,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WPS_BUTTON,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 34,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- 
- /*
-@@ -1702,6 +1790,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
- 	&board_96318ref,
-+	&board_96318ref_p300,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
diff --git a/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
deleted file mode 100644
index 85003ed015..0000000000
--- a/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
+++ /dev/null
@@ -1,88 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1782,6 +1782,75 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- 
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+	.name				= "963269BHR",
-+	.expected_cpu_id		= 0x63268,
-+
-+	.has_uart0			= 1,
-+
-+	.has_pci			= 1,
-+
-+	.has_ehci0			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "port1",
-+			},
-+
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "port2",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "port3",
-+			},
-+
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "port4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "963629BHR:green:usb1",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "963629BHR:green:usb2",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 32,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1862,6 +1931,9 @@ static const struct board_info __initcon
- 	&board_96368mvwg,
- 	&board_96368mvngr,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+	&board_963269bhr,
-+#endif
- };
- 
- static struct of_device_id const bcm963xx_boards_dt[] = {
diff --git a/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
deleted file mode 100644
index 1ca0319b7d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From: "mexit@o2.pl" <mexit@o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit@o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -767,6 +767,22 @@ static struct board_info __initdata boar
- 	.has_ehci0 = 1,
- };
- 
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+	.name				= "AR1004G",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+	
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
-+
- 
- /* BT Voyager 2110 */
- static struct board_info __initdata board_V2110 = {
-@@ -1902,6 +1918,7 @@ static const struct board_info __initcon
- 	&board_96348A_122,
- 	&board_CPVA502plus,
- 	&board_96348W3,
-+	&board_96348gw_10_AR1004G,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1962,6 +1979,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-+	{ .compatible = "asmax,ar1004g", .data = &board_96348gw_10_AR1004G, },
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
- 	{ .compatible = "brcm,bcm96348r", .data = &board_96348r, },
- 	{ .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
deleted file mode 100644
index 2b70a99bdf..0000000000
--- a/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1864,6 +1864,108 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+	.name				= "VW6339GU",
-+	.expected_cpu_id		= 0x63268,
-+
-+	.has_uart0			= 1,
-+
-+	.has_ehci0			= 1,
-+	.has_ohci0			= 1,
-+	.num_usbh_ports			= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "LAN2",
-+			},
-+
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "LAN3",
-+			},
-+
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "LAN4",
-+			},
-+
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "LAN1",
-+			},
-+
-+			[4] = {
-+				.used	= 1,
-+				.phy_id	= 7,
-+				.name	= "WAN",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "VW6339GU:green:power",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:red:power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:green:internet",
-+			.gpio		= 8,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:red:internet",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:green:dsl",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:green:wps",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "VW6339GU:green:usb",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 32,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- 
- /*
-@@ -1950,6 +2052,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- 	&board_963269bhr,
-+	&board_vw6339gu,
- #endif
- };
- 
diff --git a/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
deleted file mode 100644
index 8812aecc1d..0000000000
--- a/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
+++ /dev/null
@@ -1,85 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1801,6 +1801,66 @@ static struct board_info __initdata boar
-  * known 63268/63269 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+	.name				= "963268BU_P300",
-+	.expected_cpu_id		= 0x63268,
-+
-+	.has_uart0			= 1,
-+
-+	.has_ehci0			= 1,
-+	.has_ohci0			= 1,
-+	.num_usbh_ports			= 1,
-+
-+	.has_usbd			= 1,
-+
-+	.usbd = {
-+		.use_fullspeed		= 0,
-+		.port_no		= 0,
-+	},
-+
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 17,
-+				.name	= "FE1",
-+			},
-+
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "GbE2",
-+			},
-+
-+			[4] = {
-+				.used	= 1,
-+				.phy_id	= 0,
-+				.name	= "GbE3",
-+			},
-+
-+			[5] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "GbE1",
-+			},
-+
-+			[6] = {
-+				.used	= 1,
-+				.phy_id	= 24,
-+				.name	= "GbE4",
-+			},
-+
-+			[7] = {
-+				.used	= 1,
-+				.phy_id	= 25,
-+				.name	= "GbE5",
-+			},
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_963269bhr = {
- 	.name				= "963269BHR",
- 	.expected_cpu_id		= 0x63268,
-@@ -2051,6 +2111,7 @@ static const struct board_info __initcon
- 	&board_96368mvngr,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+	&board_963268bu_p300,
- 	&board_963269bhr,
- 	&board_vw6339gu,
- #endif
-@@ -2137,6 +2198,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+ 	{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
- #endif
- #endif /* CONFIG_OF */
- 	{ },
diff --git a/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
deleted file mode 100644
index 805b9d3896..0000000000
--- a/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
+++ /dev/null
@@ -1,94 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,7 +14,9 @@
- #include <linux/input.h>
- #include <linux/pci_ids.h>
- #include <linux/platform_device.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/rtl8367.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1795,6 +1797,65 @@ static struct board_info __initdata boar
- 	.has_ohci0 = 1,
- 	.has_ehci0 = 1,
- };
-+
-+static struct b53_platform_data WAP5813n_b53_pdata = {
-+	.alias = "eth0",
-+};
-+
-+static struct spi_board_info WAP5813n_spi_devices[] = {
-+	{
-+		.modalias = "b53-switch",
-+		.max_speed_hz = 781000,
-+		.bus_num = 0,
-+		.chip_select = 0,
-+		.platform_data = &WAP5813n_b53_pdata,
-+	}
-+};
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+	{ .offset = 97, .value = 0xfeed },
-+	{ .offset = 98, .value = 0x15d1 },
-+	{ .offset = 99, .value = 0xfb0d },
-+	{ .offset = 113, .value = 0xfef7 },
-+	{ .offset = 114, .value = 0x15f7 },
-+	{ .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+	.name				= "96369R-1231N",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_enetsw			= 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[4] = {
-+				.used = 1,
-+				.phy_id = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name = "RGMII",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43222,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+		.board_fixups			= wap5813n_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(wap5813n_fixups),
-+	},
-+
-+	.spis = WAP5813n_spi_devices,
-+	.num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- 
- /*
-@@ -2109,6 +2170,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
- 	&board_96368mvngr,
-+	&board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- 	&board_963268bu_p300,
-@@ -2196,6 +2258,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-  	{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-3.14/562-board_VR-3025u.patch b/target/linux/brcm63xx/patches-3.14/562-board_VR-3025u.patch
deleted file mode 100644
index 0506ea64cf..0000000000
--- a/target/linux/brcm63xx/patches-3.14/562-board_VR-3025u.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1798,6 +1798,60 @@ static struct board_info __initdata boar
- 	.has_ehci0 = 1,
- };
- 
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+	{ .offset = 97, .value = 0xfeb3 },
-+	{ .offset = 98, .value = 0x1618 },
-+	{ .offset = 99, .value = 0xfab0 },
-+	{ .offset = 113, .value = 0xfed1 },
-+	{ .offset = 114, .value = 0x1609 },
-+	{ .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+	.name					= "96368M-1541N",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.use_fallback_sprom			= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_enetsw				= 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "port1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "port2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "port3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "port4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43222,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+		.board_fixups			= vr3025u_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(vr3025u_fixups),
-+	},
-+};
-+
- static struct b53_platform_data WAP5813n_b53_pdata = {
- 	.alias = "eth0",
- };
-@@ -2170,6 +2224,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
- 	&board_96368mvngr,
-+	&board_VR3025u,
- 	&board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -2258,6 +2313,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch b/target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch
deleted file mode 100644
index 1619ee1a67..0000000000
--- a/target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1852,6 +1852,60 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+	{ .offset = 97, .value = 0xfeb3 },
-+	{ .offset = 98, .value = 0x1618 },
-+	{ .offset = 99, .value = 0xfab0 },
-+	{ .offset = 113, .value = 0xfed1 },
-+	{ .offset = 114, .value = 0x1609 },
-+	{ .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+	.name					= "96368M-1341N",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.use_fallback_sprom			= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_enetsw				= 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "port1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "port2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "port3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "port4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43222,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+		.board_fixups			= vr3025un_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(vr3025un_fixups),
-+	},
-+};
-+
- static struct b53_platform_data WAP5813n_b53_pdata = {
- 	.alias = "eth0",
- };
-@@ -2225,6 +2279,7 @@ static const struct board_info __initcon
- 	&board_96368mvwg,
- 	&board_96368mvngr,
- 	&board_VR3025u,
-+	&board_VR3025un,
- 	&board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -2314,6 +2369,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- 	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-3.14/564-board_P870HW-51a_v2.patch b/target/linux/brcm63xx/patches-3.14/564-board_P870HW-51a_v2.patch
deleted file mode 100644
index 480d9fc8c7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/564-board_P870HW-51a_v2.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1807,6 +1807,49 @@ static struct sprom_fixup __initdata vr3
- 	{ .offset = 115, .value = 0xfad9 },
- };
- 
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+	.name				= "P870HW-51a_v2",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_enetsw			= 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "port1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "port2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "port3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "port4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_VR3025u = {
- 	.name					= "96368M-1541N",
- 	.expected_cpu_id		= 0x6368,
-@@ -2278,6 +2321,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
- 	&board_96368mvngr,
-+	&board_P870HW51A_V2,
- 	&board_VR3025u,
- 	&board_VR3025un,
- 	&board_WAP5813n,
-@@ -2371,6 +2415,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- 	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+	{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-  	{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-3.14/565-board_hw520.patch b/target/linux/brcm63xx/patches-3.14/565-board_hw520.patch
deleted file mode 100644
index c84b194104..0000000000
--- a/target/linux/brcm63xx/patches-3.14/565-board_hw520.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1445,6 +1445,37 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_HW520 = {
-+	.name				= "HW6358GW_B",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_enet0			= 1,
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.has_enet1			= 1,
-+	.enet1 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM4318,
-+		.pci_bus			= 0,
-+		.pci_dev			= 1,
-+	},
-+};
-+
- static struct board_info __initdata board_HW553 = {
- 	.name                           = "HW553",
- 	.expected_cpu_id                = 0x6358,
-@@ -2305,6 +2336,7 @@ static const struct board_info __initcon
- 	&board_nb4_ser_r0,
- 	&board_nb4_fxc_r1,
- 	&board_ct6373_1,
-+	&board_HW520,
- 	&board_HW553,
- 	&board_HW556_A,
- 	&board_HW556_B,
-@@ -2392,6 +2424,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- 	{ .compatible = "d-link,dva-g3810bn/tl", .data = &board_DVAG3810BN, },
-+	{ .compatible = "huawei,hg520v", .data = &board_HW520, },
- 	{ .compatible = "huawei,hg553", .data = &board_HW553, },
- 	{ .compatible = "huawei,hg556a-a", .data = &board_HW556_A, },
- 	{ .compatible = "huawei,hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/brcm63xx/patches-3.14/566-board_A4001N.patch b/target/linux/brcm63xx/patches-3.14/566-board_A4001N.patch
deleted file mode 100644
index 548c65632a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/566-board_A4001N.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -447,6 +447,50 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_A4001N = {
-+	.name				= "96328dg2x2",
-+	.expected_cpu_id		= 0x6328,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 1,
-+	.has_enetsw			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id	= 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43225,
-+		.pci_bus			= 1,
-+		.pci_dev			= 0,
-+	},
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
- 	.name					= "963281T_TEF",
- 	.expected_cpu_id			= 0x6328,
-@@ -2287,6 +2331,7 @@ static const struct board_info __initcon
- 	&board_AR5381u,
- 	&board_AR5387un,
- 	&board_963281TAN,
-+	&board_A4001N,
- 	&board_A4001N1,
- 	&board_dsl_274xb_f1,
- 	&board_FAST2704V2,
-@@ -2371,6 +2416,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+	{ .compatible = "adb,a4001n", .data = &board_A4001N, },
- 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
- 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/brcm63xx/patches-3.14/567-board_dsl-2751b_e1.patch b/target/linux/brcm63xx/patches-3.14/567-board_dsl-2751b_e1.patch
deleted file mode 100644
index 72be18cdb2..0000000000
--- a/target/linux/brcm63xx/patches-3.14/567-board_dsl-2751b_e1.patch
+++ /dev/null
@@ -1,152 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -236,6 +236,141 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+	{ .offset = 96, .value = 0x2046 },
-+	{ .offset = 97, .value = 0xfe9d },
-+	{ .offset = 98, .value = 0x1854 },
-+	{ .offset = 99, .value = 0xfa59 },
-+	{ .offset = 112, .value = 0x2046 },
-+	{ .offset = 113, .value = 0xfe79 },
-+	{ .offset = 114, .value = 0x17f5 },
-+	{ .offset = 115, .value = 0xfa47 },
-+	{ .offset = 161, .value = 0x2222 },
-+	{ .offset = 162, .value = 0x2222 },
-+	{ .offset = 169, .value = 0x2222 },
-+	{ .offset = 170, .value = 0x2222 },
-+	{ .offset = 171, .value = 0x5555 },
-+	{ .offset = 172, .value = 0x5555 },
-+	{ .offset = 173, .value = 0x4444 },
-+	{ .offset = 174, .value = 0x4444 },
-+	{ .offset = 175, .value = 0x5555 },
-+	{ .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+	.name				= "AW5200B",
-+	.expected_cpu_id		= 0x6318,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.use_fallback_sprom		= 1,
-+
-+	.has_enetsw			= 1,
-+
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used	= 1,
-+				.phy_id = 1,
-+				.name	= "Port 1",
-+			},
-+			[1] = {
-+				.used	= 1,
-+				.phy_id	= 2,
-+				.name	= "Port 2",
-+			},
-+			[2] = {
-+				.used	= 1,
-+				.phy_id	= 3,
-+				.name	= "Port 3",
-+			},
-+			[3] = {
-+				.used	= 1,
-+				.phy_id	= 4,
-+				.name	= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "dsl-275xb:green:power",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "dsl-275xb:green:inet",
-+			.gpio		= 8,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-275xb:red:inet-fail",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-275xb:red:post-failed",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-275xb:wps:blue",
-+			.gpio		= 16,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-275xb:green:dsl",
-+			.gpio		= 17,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "dsl-275xb:green:usb",
-+			.gpio		= 49, /* FIXME: does not work! */
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "wlan",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wps",
-+			.gpio			= 33,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WPS_BUTTON,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 34,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+
-+	.fallback_sprom = {
-+		.type 				= SPROM_BCM43217,
-+		.pci_bus			= 1,
-+		.pci_dev			= 0,
-+		.board_fixups			= dsl2751b_e1_fixups,
-+		.num_board_fixups		= ARRAY_SIZE(dsl2751b_e1_fixups),
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- 
- /*
-@@ -2325,6 +2460,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
- 	&board_96318ref,
- 	&board_96318ref_p300,
-+	&board_dsl_2751b_d1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
diff --git a/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch b/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
deleted file mode 100644
index 82dfe68ce7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/568-board_DGND3700v1_3800B.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2008,6 +2008,48 @@ static struct board_info __initdata boar
- 	.has_ehci0 = 1,
- };
- 
-+static struct b53_platform_data DGND3700v1_3800B_b53_pdata = {
-+	.alias    = "eth0",
-+};
-+
-+static struct spi_board_info DGND3700v1_3800B_spi_devices[] = {
-+	{
-+		.modalias = "b53-switch",
-+		.max_speed_hz = 781000,
-+		.bus_num = 0,
-+		.chip_select = 1,
-+		.platform_data = &DGND3700v1_3800B_b53_pdata,
-+	}
-+};
-+
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+	.name				= "DGND3700v1_3800B",
-+	.expected_cpu_id		= 0x6368,
-+
-+	.has_uart0			= 1,
-+	.has_pci			= 1,
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+	.num_usbh_ports			= 2,
-+
-+	.has_enetsw			= 1,
-+	.enetsw = {
-+		.used_ports = {
-+			[5] = {
-+				.used  = 1,
-+				.phy_id  = 0xff,
-+				.bypass_link = 1,
-+				.force_speed = 1000,
-+				.force_duplex_full = 1,
-+				.name  = "RGMII",
-+			},
-+		},
-+	},
-+
-+	.spis = DGND3700v1_3800B_spi_devices,
-+	.num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
- 	{ .offset = 97, .value = 0xfeb3 },
- 	{ .offset = 98, .value = 0x1618 },
-@@ -2534,6 +2576,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- 	&board_96368mvwg,
- 	&board_96368mvngr,
-+	&board_DGND3700v1_3800B,
- 	&board_P870HW51A_V2,
- 	&board_VR3025u,
- 	&board_VR3025un,
-@@ -2630,6 +2673,7 @@ static struct of_device_id const bcm963x
- 	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- 	{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+	{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
- 	{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
deleted file mode 100644
index 98bcee8674..0000000000
--- a/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -40,6 +40,12 @@ struct bcm963xx_nvram {
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
- 
-+/*
-+ * Required export for WL
-+ */
-+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
- 	unsigned int check_len;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
diff --git a/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
deleted file mode 100644
index 11a83536b7..0000000000
--- a/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -8,6 +8,7 @@
-  */
- 
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
-@@ -387,7 +388,19 @@ struct fallback_sprom_match {
- 	struct ssb_sprom sprom;
- };
- 
--static struct fallback_sprom_match fallback_sprom;
-+struct fallback_sprom_match fallback_sprom;
-+
-+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
-+{
-+	if (pci_bus != fallback_sprom.pci_bus ||
-+	    pci_slot != fallback_sprom.pci_dev)
-+		pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+			fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+			pci_bus, pci_slot);
-+	memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-+	return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
- 
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644
index 9037d8954a..0000000000
--- a/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK	1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK	0x7
- 
-+#define RTL8367_PHY_AD_REG			0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET	5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK		0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)		(0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE			BIT(12)
- #define   RTL8367_DI_FORCE_NWAY			BIT(7)
-@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
- 	case RTL8367_EXTIF_MODE_RGMII_33V:
- 		REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
- 		REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+		REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
- 		break;
- 
- 	case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/brcm63xx/patches-3.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/brcm63xx/patches-3.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
deleted file mode 100644
index 8b603e8b66..0000000000
--- a/target/linux/brcm63xx/patches-3.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 6 Apr 2014 22:33:16 +0200
-Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
-
-Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
-it by ensuring we are always doing aligned copies.
-
-Should fix filename corruption in jffs2 with SMP.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- fs/jffs2/nodelist.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -255,7 +255,7 @@ struct jffs2_full_dirent
- 	uint32_t ino; /* == zero for unlink */
- 	unsigned int nhash;
- 	unsigned char type;
--	unsigned char name[0];
-+	unsigned char name[0] __attribute__((aligned((sizeof(long)))));
- };
- 
- /*
diff --git a/target/linux/brcm63xx/patches-3.14/810-BCM63XX-move-kernel-behind-CFE.patch b/target/linux/brcm63xx/patches-3.14/810-BCM63XX-move-kernel-behind-CFE.patch
deleted file mode 100644
index b161edbd72..0000000000
--- a/target/linux/brcm63xx/patches-3.14/810-BCM63XX-move-kernel-behind-CFE.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b99815f47828214b298178b0d0e2a9f3aae9f24a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Mar 2015 11:49:16 +0100
-Subject: [PATCH] MIPS: BCM63XX: move kernel behind CFE
-
-CFE will load itself to offset 4 MiB (or 6 MiB) in memory occupying a
-bit over one MiB. Traditionally the kernel will get linked to and loaded
-at offset 64k.
-This will pose a problem if the kernel size reaches 4 MiB - 64 kB, as
-CFE will start overwriting itself. This can easily happen by including a
-ramdisk image in the kernel.
-While for net-booted elf kernels this can be worked around by wrapping
-them in a lzma boot loader, on-flash images require the kernel to be
-lzma compressed. This would cause inefficient double compression.
-
-Luckily we have full control over where the kernel will be extracted to
-and the entry point to be called, so move the kernel to behind CFE.
----
- arch/mips/bcm63xx/Platform |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/Platform
-+++ b/arch/mips/bcm63xx/Platform
-@@ -4,4 +4,4 @@
- platform-$(CONFIG_BCM63XX)	+= bcm63xx/
- cflags-$(CONFIG_BCM63XX)	+=					\
- 		-I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
--load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
-+load-$(CONFIG_BCM63XX)		:= 0xffffffff80800000
-- 
cgit v1.2.3