From a902e6a657e0807da0bb5d154db2e208b7f567ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= Date: Sun, 28 Jun 2020 23:52:10 +0200 Subject: mvebu: LS421DE: use automatic fan control with thermal zones MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Buffalo Linkstation LS421DE has a chassis fan for cooling two internal hard drives. Currently there is no control over this fan, running always at fixed medium speed. With the recent jump to the kernel 5.4, now we can monitor the hard drive temperature and control the fan with thermal zones. Install the kmod-hwmon-drivetemp module and wire up a thermal zone on the dts file to allow automatic fan control by the kernel. Tested succesfully using a single Crucial BX500 SSD drive. Signed-off-by: Daniel González Cabanelas --- .../arm/boot/dts/armada-370-buffalo-ls421de.dts | 65 +++++++++++++++++++++- target/linux/mvebu/image/cortexa9.mk | 5 +- 2 files changed, 67 insertions(+), 3 deletions(-) diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts index 4d2760eb72..ea392f9e41 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -11,6 +11,7 @@ #include "mvebu-linkstation-fan.dtsi" #include #include +#include / { model = "Buffalo LinkStation LS421DE"; @@ -40,10 +41,60 @@ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; }; - gpio_fan { + system_fan: gpio_fan { gpios = <&gpio0 13 GPIO_ACTIVE_HIGH &gpio0 14 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + #cooling-cells = <2>; + }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <&hdd0_temp>, <&hdd1_temp>; + coefficients = <1 1>; + + trips { + chassis_alert1: chassis-alert1 { + temperature = <36000>; + hysteresis = <2000>; + type = "active"; + }; + chassis_alert2: chassis-alert2 { + temperature = <46000>; + hysteresis = <2000>; + type = "active"; + }; + chassis_alert3: chassis-alert3 { + temperature = <56000>; + hysteresis = <2000>; + type = "passive"; + }; + chassis_crit: chassis-crit { + temperature = <66000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&chassis_alert1>; + cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; + }; + map2 { + trip = <&chassis_alert2>; + cooling-device = <&system_fan 2 2>; + }; + map3 { + trip = <&chassis_alert3>; + cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; + }; + }; + }; }; gpio_keys { @@ -225,6 +276,18 @@ &sata { nr-ports = <2>; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hdd0_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; + + hdd1_temp: sata-port@1 { + reg = <1>; + #thermal-sensor-cells = <0>; + }; }; &sdio { diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index f01a76a9d3..7f0a2fe697 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -17,8 +17,9 @@ define Device/buffalo_ls421de KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none DEVICE_DTS := armada-370-buffalo-ls421de DEVICE_PACKAGES := \ - kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-usb3 kmod-md-raid0 \ - kmod-md-raid1 kmod-md-mod kmod-fs-xfs mkf2fs e2fsprogs partx-utils + kmod-rtc-rs5c372a kmod-hwmon-gpiofan kmod-hwmon-drivetemp kmod-usb3 \ + kmod-md-raid0 kmod-md-raid1 kmod-md-mod kmod-fs-xfs mkf2fs e2fsprogs \ + partx-utils endef TARGET_DEVICES += buffalo_ls421de -- cgit v1.2.3