From 679db02b10474e8a685baeecc37ddd511f1d4808 Mon Sep 17 00:00:00 2001 From: Arturas Moskvinas Date: Tue, 11 Aug 2020 23:03:53 +0300 Subject: sunxi: add support for FriendlyArm Zeropi Specification CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz DDR3 RAM: 256MB/512MB Connectivity: 10/100/1000Mbps Ethernet USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input only Debug Serial Port: 4Pin, 2.54 mm pitch pin header Power Supply: DC 5V/2A PCB Dimension: 40 x 40 x 1.2mm Installation: Burn the image file to an SD Card with dd or any image burning tool Boot ZeroPi from the SD Card The following features are working and tested: Ethernet port 10/100/1000M Ethernet Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi) Signed-off-by: Arturas Moskvinas --- package/boot/uboot-sunxi/Makefile | 7 ++ .../250-sun8i-h3-zeropi-add-device-tree.patch | 81 ++++++++++++++++++++++ .../251-sun8i-h3-zeropi-add-defconfig.patch | 24 +++++++ 3 files changed, 112 insertions(+) create mode 100644 package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch create mode 100644 package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch (limited to 'package/boot/uboot-sunxi') diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index ac2f9de888..4363445114 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -154,6 +154,12 @@ define U-Boot/nanopi_m1_plus BUILD_DEVICES:=friendlyarm_nanopi-m1-plus endef +define U-Boot/zeropi + BUILD_SUBTARGET:=cortexa7 + NAME:=ZeroPi (H3) + BUILD_DEVICES:=friendlyarm_zeropi +endef + define U-Boot/nanopi_neo_air BUILD_SUBTARGET:=cortexa7 NAME:=U-Boot for NanoPi NEO Air (H3) @@ -299,6 +305,7 @@ UBOOT_TARGETS := \ Linksprite_pcDuino3 \ Lamobo_R1 \ nanopi_m1_plus \ + zeropi \ nanopi_neo \ nanopi_neo_air \ nanopi_neo_plus2 \ diff --git a/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch b/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch new file mode 100644 index 0000000000..4250e4e9db --- /dev/null +++ b/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch @@ -0,0 +1,81 @@ +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -539,7 +539,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-orangepi-plus.dtb \ + sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ +- sun8i-h3-rervision-dvk.dtb ++ sun8i-h3-rervision-dvk.dtb \ ++ sun8i-h3-zeropi.dtb + dtb-$(CONFIG_MACH_SUN8I_R40) += \ + sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-v40-bananapi-m2-berry.dtb +--- /dev/null ++++ b/arch/arm/dts/sun8i-h3-zeropi.dts +@@ -0,0 +1,66 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "sun8i-h3-nanopi.dtsi" ++ ++/ { ++ model = "FriendlyElec ZeroPi"; ++ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; ++ ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_nanopi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&pio { ++ gmac_power_pin_nanopi: gmac_power_pin@0 { ++ pins = "PD6"; ++ function = "gpio_out"; ++ }; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ status = "okay"; ++ dr_mode = "peripheral"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++}; diff --git a/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch b/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch new file mode 100644 index 0000000000..76e333298e --- /dev/null +++ b/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch @@ -0,0 +1,24 @@ +--- /dev/null ++++ b/configs/zeropi_defconfig +@@ -0,0 +1,21 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_MACH_SUN8I_H3=y ++CONFIG_DRAM_CLK=408 ++CONFIG_DRAM_ZQ=3881979 ++CONFIG_DRAM_ODT_EN=y ++CONFIG_MACPWR="PD6" ++# CONFIG_VIDEO_DE2 is not set ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_CONSOLE_MUX=y ++CONFIG_SPL=y ++CONFIG_SYS_CLK_FREQ=480000000 ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++# CONFIG_CMD_FPGA is not set ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y -- cgit v1.2.3