From 157072ea2b7bdbe8de1339936a5933061a27e67a Mon Sep 17 00:00:00 2001 From: Yousong Zhou Date: Wed, 27 Feb 2019 03:22:35 +0000 Subject: busybox: unindent busybox Config.in This is to align with upstream change 72089cf ("config: deindent all help texts") and to make the follow-up change syncing Config.in files with current busybox version more reviewable It was made with the following commands cd package/utils/busybox/config find . -name 'Config.in' | xargs sed -ir -e 's/^\t \([^ ]\)/\t\1/' Signed-off-by: Yousong Zhou --- package/utils/busybox/config/networking/Config.in | 710 +++++++++++----------- 1 file changed, 355 insertions(+), 355 deletions(-) (limited to 'package/utils/busybox/config/networking/Config.in') diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in index 97a1bfbce5..f9063d367e 100644 --- a/package/utils/busybox/config/networking/Config.in +++ b/package/utils/busybox/config/networking/Config.in @@ -11,134 +11,134 @@ config BUSYBOX_CONFIG_FEATURE_IPV6 default BUSYBOX_DEFAULT_FEATURE_IPV6 depends on IPV6 help - Enable IPv6 support in busybox. - This adds IPv6 support in the networking applets. + Enable IPv6 support in busybox. + This adds IPv6 support in the networking applets. config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL bool "Enable Unix domain socket support (usually not needed)" default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL help - Enable Unix domain socket support in all busybox networking - applets. Address of the form local:/path/to/unix/socket - will be recognized. + Enable Unix domain socket support in all busybox networking + applets. Address of the form local:/path/to/unix/socket + will be recognized. - This extension is almost never used in real world usage. - You most likely want to say N. + This extension is almost never used in real world usage. + You most likely want to say N. config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS bool "Prefer IPv4 addresses from DNS queries" default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS depends on BUSYBOX_CONFIG_FEATURE_IPV6 help - Use IPv4 address of network host if it has one. + Use IPv4 address of network host if it has one. - If this option is off, the first returned address will be used. - This may cause problems when your DNS server is IPv6-capable and - is returning IPv6 host addresses too. If IPv6 address - precedes IPv4 one in DNS reply, busybox network applets - (e.g. wget) will use IPv6 address. On an IPv6-incapable host - or network applets will fail to connect to the host - using IPv6 address. + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS bool "Verbose resolution errors" default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS help - Enable if you are not satisfied with simplistic - "can't resolve 'hostname.com'" and want to know more. - This may increase size of your executable a bit. + Enable if you are not satisfied with simplistic + "can't resolve 'hostname.com'" and want to know more. + This may increase size of your executable a bit. config BUSYBOX_CONFIG_ARP bool "arp" default BUSYBOX_DEFAULT_ARP select BUSYBOX_CONFIG_PLATFORM_LINUX help - Manipulate the system ARP cache. + Manipulate the system ARP cache. config BUSYBOX_CONFIG_ARPING bool "arping" default BUSYBOX_DEFAULT_ARPING select BUSYBOX_CONFIG_PLATFORM_LINUX help - Ping hosts by ARP packets. + Ping hosts by ARP packets. config BUSYBOX_CONFIG_BRCTL bool "brctl" default BUSYBOX_DEFAULT_BRCTL select BUSYBOX_CONFIG_PLATFORM_LINUX help - Manage ethernet bridges. - Supports addbr/delbr and addif/delif. + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY bool "Fancy options" default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY depends on BUSYBOX_CONFIG_BRCTL help - Add support for extended option like: + Add support for extended option like: setageing, setfd, sethello, setmaxage, setpathcost, setportprio, setbridgeprio, stp - This adds about 600 bytes. + This adds about 600 bytes. config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW bool "Support show" default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY help - Add support for option which prints the current config: + Add support for option which prints the current config: show config BUSYBOX_CONFIG_DNSD bool "dnsd" default BUSYBOX_DEFAULT_DNSD help - Small and static DNS server daemon. + Small and static DNS server daemon. config BUSYBOX_CONFIG_ETHER_WAKE bool "ether-wake" default BUSYBOX_DEFAULT_ETHER_WAKE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Send a magic packet to wake up sleeping machines. + Send a magic packet to wake up sleeping machines. config BUSYBOX_CONFIG_FTPD bool "ftpd" default BUSYBOX_DEFAULT_FTPD help - Simple FTP daemon. You have to run it via inetd. + Simple FTP daemon. You have to run it via inetd. config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE bool "Enable upload commands" default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE depends on BUSYBOX_CONFIG_FTPD help - Enable all kinds of FTP upload commands (-w option) + Enable all kinds of FTP upload commands (-w option) config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST bool "Enable workaround for RFC-violating clients" default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST depends on BUSYBOX_CONFIG_FTPD help - Some ftp clients (among them KDE's Konqueror) issue illegal - "LIST -l" requests. This option works around such problems. - It might prevent you from listing files starting with "-" and - it increases the code size by ~40 bytes. - Most other ftp servers seem to behave similar to this. + Some ftp clients (among them KDE's Konqueror) issue illegal + "LIST -l" requests. This option works around such problems. + It might prevent you from listing files starting with "-" and + it increases the code size by ~40 bytes. + Most other ftp servers seem to behave similar to this. config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION bool "Enable authentication" default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION depends on BUSYBOX_CONFIG_FTPD help - Enable basic system login as seen in telnet etc. + Enable basic system login as seen in telnet etc. config BUSYBOX_CONFIG_FTPGET bool "ftpget" default BUSYBOX_DEFAULT_FTPGET help - Retrieve a remote file via FTP. + Retrieve a remote file via FTP. config BUSYBOX_CONFIG_FTPPUT bool "ftpput" default BUSYBOX_DEFAULT_FTPPUT help - Store a remote file via FTP. + Store a remote file via FTP. config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS bool "Enable long options in ftpget/ftpput" @@ -148,252 +148,252 @@ config BUSYBOX_CONFIG_HOSTNAME bool "hostname" default BUSYBOX_DEFAULT_HOSTNAME help - Show or set the system's host name. + Show or set the system's host name. config BUSYBOX_CONFIG_DNSDOMAINNAME bool "dnsdomainname" default BUSYBOX_DEFAULT_DNSDOMAINNAME help - Alias to "hostname -d". + Alias to "hostname -d". config BUSYBOX_CONFIG_HTTPD bool "httpd" default BUSYBOX_DEFAULT_HTTPD help - HTTP server. + HTTP server. config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES bool "Support 'Ranges:' header" default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES depends on BUSYBOX_CONFIG_HTTPD help - Makes httpd emit "Accept-Ranges: bytes" header and understand - "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted - downloads, seeking in multimedia players etc. + Makes httpd emit "Accept-Ranges: bytes" header and understand + "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted + downloads, seeking in multimedia players etc. config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID bool "Enable -u option" default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID depends on BUSYBOX_CONFIG_HTTPD help - This option allows the server to run as a specific user - rather than defaulting to the user that starts the server. - Use of this option requires special privileges to change to a - different user. + This option allows the server to run as a specific user + rather than defaulting to the user that starts the server. + Use of this option requires special privileges to change to a + different user. config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH bool "Enable Basic http Authentication" default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH depends on BUSYBOX_CONFIG_HTTPD help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - Example for httpd.conf file: - /adm:toor:PaSsWd + Utilizes password settings from /etc/httpd.conf for basic + authentication on a per url basis. + Example for httpd.conf file: + /adm:toor:PaSsWd config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 bool "Support MD5 crypted passwords for http Authentication" default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5 depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH help - Enables encrypted passwords, and wildcard user/passwords - in httpd.conf file. - User '*' means 'any system user name is ok', - password of '*' means 'use system password for this user' - Examples: - /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0 - /adm:root:* - /wiki:*:* + Enables encrypted passwords, and wildcard user/passwords + in httpd.conf file. + User '*' means 'any system user name is ok', + password of '*' means 'use system password for this user' + Examples: + /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0 + /adm:root:* + /wiki:*:* config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI bool "Support Common Gateway Interface (CGI)" default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI depends on BUSYBOX_CONFIG_HTTPD help - This option allows scripts and executables to be invoked - when specific URLs are requested. + This option allows scripts and executables to be invoked + when specific URLs are requested. config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR bool "Support running scripts through an interpreter" default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help - This option enables support for running scripts through an - interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an additional line in your - httpd.conf file: - *.php:/path/to/your/php + This option enables support for running scripts through an + interpreter. Turn this on if you want PHP scripts to work + properly. You need to supply an additional line in your + httpd.conf file: + *.php:/path/to/your/php config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV bool "Set REMOTE_PORT environment variable for CGI" default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help - Use of this option can assist scripts in generating - references that contain a unique port number. + Use of this option can assist scripts in generating + references that contain a unique port number. config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR bool "Enable -e option (useful for CGIs written as shell scripts)" default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR depends on BUSYBOX_CONFIG_HTTPD help - This option allows html encoding of arbitrary strings for display - by the browser. Output goes to stdout. - For example, httpd -e "" produces - "<Hello World>". + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "" produces + "<Hello World>". config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES bool "Support custom error pages" default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES depends on BUSYBOX_CONFIG_HTTPD help - This option allows you to define custom error pages in - the configuration file instead of the default HTTP status - error pages. For instance, if you add the line: + This option allows you to define custom error pages in + the configuration file instead of the default HTTP status + error pages. For instance, if you add the line: E404:/path/e404.html - in the config file, the server will respond the specified - '/path/e404.html' file instead of the terse '404 NOT FOUND' - message. + in the config file, the server will respond the specified + '/path/e404.html' file instead of the terse '404 NOT FOUND' + message. config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY bool "Support reverse proxy" default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY depends on BUSYBOX_CONFIG_HTTPD help - This option allows you to define URLs that will be forwarded - to another HTTP server. To setup add the following line to the - configuration file + This option allows you to define URLs that will be forwarded + to another HTTP server. To setup add the following line to the + configuration file P:/url/:http://hostname[:port]/new/path/ - Then a request to /url/myfile will be forwarded to - http://hostname[:port]/new/path/myfile. + Then a request to /url/myfile will be forwarded to + http://hostname[:port]/new/path/myfile. config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP bool "Support GZIP content encoding" default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP depends on BUSYBOX_CONFIG_HTTPD help - Makes httpd send files using GZIP content encoding if the - client supports it and a pre-compressed .gz exists. + Makes httpd send files using GZIP content encoding if the + client supports it and a pre-compressed .gz exists. config BUSYBOX_CONFIG_IFCONFIG bool "ifconfig" default BUSYBOX_DEFAULT_IFCONFIG select BUSYBOX_CONFIG_PLATFORM_LINUX help - Ifconfig is used to configure the kernel-resident network interfaces. + Ifconfig is used to configure the kernel-resident network interfaces. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS bool "Enable status reporting output (+7k)" default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS depends on BUSYBOX_CONFIG_IFCONFIG help - If ifconfig is called with no arguments it will display the status - of the currently active interfaces. + If ifconfig is called with no arguments it will display the status + of the currently active interfaces. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP bool "Enable slip-specific options \"keepalive\" and \"outfill\"" default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP depends on BUSYBOX_CONFIG_IFCONFIG help - Allow "keepalive" and "outfill" support for SLIP. If you're not - planning on using serial lines, leave this unchecked. + Allow "keepalive" and "outfill" support for SLIP. If you're not + planning on using serial lines, leave this unchecked. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ depends on BUSYBOX_CONFIG_IFCONFIG help - Allow the start address for shared memory, start address for I/O, - and/or the interrupt line used by the specified device. + Allow the start address for shared memory, start address for I/O, + and/or the interrupt line used by the specified device. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW bool "Enable option \"hw\" (ether only)" default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW depends on BUSYBOX_CONFIG_IFCONFIG help - Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' - class. + Set the hardware address of this interface, if the device driver + supports this operation. Currently, we only support the 'ether' + class. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS bool "Set the broadcast automatically" default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS depends on BUSYBOX_CONFIG_IFCONFIG help - Setting this will make ifconfig attempt to find the broadcast - automatically if the value '+' is used. + Setting this will make ifconfig attempt to find the broadcast + automatically if the value '+' is used. config BUSYBOX_CONFIG_IFENSLAVE bool "ifenslave" default BUSYBOX_DEFAULT_IFENSLAVE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Userspace application to bind several interfaces - to a logical interface (use with kernel bonding driver). + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). config BUSYBOX_CONFIG_IFPLUGD bool "ifplugd" default BUSYBOX_DEFAULT_IFPLUGD select BUSYBOX_CONFIG_PLATFORM_LINUX help - Network interface plug detection daemon. + Network interface plug detection daemon. config BUSYBOX_CONFIG_IFUP bool "ifup" default BUSYBOX_DEFAULT_IFUP help - Activate the specified interfaces. This applet makes use - of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of - course you could use non-busybox versions of these programs, so - against my better judgement (since this will surely result in plenty - of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig", "route" and "run-parts" or the "ip" command, either - via busybox or via standalone utilities. + Activate the specified interfaces. This applet makes use + of either "ifconfig" and "route" or the "ip" command to actually + configure network interfaces. Therefore, you will probably also want + to enable either IFCONFIG and ROUTE, or enable + FEATURE_IFUPDOWN_IP and the various IP options. Of + course you could use non-busybox versions of these programs, so + against my better judgement (since this will surely result in plenty + of support questions on the mailing list), I do not force you to + enable these additional options. It is up to you to supply either + "ifconfig", "route" and "run-parts" or the "ip" command, either + via busybox or via standalone utilities. config BUSYBOX_CONFIG_IFDOWN bool "ifdown" default BUSYBOX_DEFAULT_IFDOWN help - Deactivate the specified interfaces. + Deactivate the specified interfaces. config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH string "Absolute path to ifstate file" default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - ifupdown keeps state information in a file called ifstate. - Typically it is located in /var/run/ifstate, however - some distributions tend to put it in other places - (debian, for example, uses /etc/network/run/ifstate). - This config option defines location of ifstate. + ifupdown keeps state information in a file called ifstate. + Typically it is located in /var/run/ifstate, however + some distributions tend to put it in other places + (debian, for example, uses /etc/network/run/ifstate). + This config option defines location of ifstate. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP bool "Use ip tool (else ifconfig/route is used)" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older "ifconfig" and "route" utilities. + Use the iproute "ip" command to implement "ifup" and "ifdown", rather + than the default of using the older "ifconfig" and "route" utilities. - If Y: you must install either the full-blown iproute2 package - or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets - will not work. + If Y: you must install either the full-blown iproute2 package + or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets + will not work. - If N: you must install either the full-blown ifconfig and route - utilities, or enable these applets in Busybox. + If N: you must install either the full-blown ifconfig and route + utilities, or enable these applets in Busybox. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 bool "Support IPv4" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4 depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - If you want ifup/ifdown to talk IPv4, leave this on. + If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 bool "Support IPv6" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6 depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6 help - If you need support for IPv6, turn this option on. + If you need support for IPv6, turn this option on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING @@ -401,68 +401,68 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - This enables support for the "mapping" stanza, unless you have - a weird network setup you don't need it. + This enables support for the "mapping" stanza, unless you have + a weird network setup you don't need it. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP bool "Support external DHCP clients" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - This enables support for the external dhcp clients. Clients are - tried in the following order: dhcpcd, dhclient, pump and udhcpc. - Otherwise, if udhcpc applet is enabled, it is used. - Otherwise, ifup/ifdown will have no support for DHCP. + This enables support for the external dhcp clients. Clients are + tried in the following order: dhcpcd, dhclient, pump and udhcpc. + Otherwise, if udhcpc applet is enabled, it is used. + Otherwise, ifup/ifdown will have no support for DHCP. config BUSYBOX_CONFIG_INETD bool "inetd" default BUSYBOX_DEFAULT_INETD select BUSYBOX_CONFIG_FEATURE_SYSLOG help - Internet superserver daemon + Internet superserver daemon config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO bool "Support echo service" default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO depends on BUSYBOX_CONFIG_INETD help - Echo received data internal inetd service + Echo received data internal inetd service config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD bool "Support discard service" default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD depends on BUSYBOX_CONFIG_INETD help - Internet /dev/null internal inetd service + Internet /dev/null internal inetd service config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME bool "Support time service" default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME depends on BUSYBOX_CONFIG_INETD help - Return 32 bit time since 1900 internal inetd service + Return 32 bit time since 1900 internal inetd service config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME bool "Support daytime service" default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME depends on BUSYBOX_CONFIG_INETD help - Return human-readable time internal inetd service + Return human-readable time internal inetd service config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN bool "Support chargen service" default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN depends on BUSYBOX_CONFIG_INETD help - Familiar character generator internal inetd service + Familiar character generator internal inetd service config BUSYBOX_CONFIG_IP bool "ip" default BUSYBOX_DEFAULT_IP select BUSYBOX_CONFIG_PLATFORM_LINUX help - The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with - TCP/IP. + The "ip" applet is a TCP/IP interface configuration and routing + utility. You generally don't need "ip" to use busybox with + TCP/IP. config BUSYBOX_CONFIG_IPADDR bool "ipaddr" @@ -470,7 +470,7 @@ config BUSYBOX_CONFIG_IPADDR select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip addr: ipaddr + Support short form of ip addr: ipaddr config BUSYBOX_CONFIG_IPLINK bool "iplink" @@ -478,7 +478,7 @@ config BUSYBOX_CONFIG_IPLINK select BUSYBOX_CONFIG_FEATURE_IP_LINK select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip link: iplink + Support short form of ip link: iplink config BUSYBOX_CONFIG_IPROUTE bool "iproute" @@ -486,7 +486,7 @@ config BUSYBOX_CONFIG_IPROUTE select BUSYBOX_CONFIG_FEATURE_IP_ROUTE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip route: iproute + Support short form of ip route: iproute config BUSYBOX_CONFIG_IPTUNNEL bool "iptunnel" @@ -494,7 +494,7 @@ config BUSYBOX_CONFIG_IPTUNNEL select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip tunnel: iptunnel + Support short form of ip tunnel: iptunnel config BUSYBOX_CONFIG_IPRULE bool "iprule" @@ -502,7 +502,7 @@ config BUSYBOX_CONFIG_IPRULE select BUSYBOX_CONFIG_FEATURE_IP_RULE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip rule: iprule + Support short form of ip rule: iprule config BUSYBOX_CONFIG_IPNEIGH bool "ipneigh" @@ -510,72 +510,72 @@ config BUSYBOX_CONFIG_IPNEIGH select BUSYBOX_CONFIG_FEATURE_IP_NEIGH select BUSYBOX_CONFIG_PLATFORM_LINUX help - Support short form of ip neigh: ipneigh + Support short form of ip neigh: ipneigh config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS bool "ip address" default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR help - Address manipulation support for the "ip" applet. + Address manipulation support for the "ip" applet. config BUSYBOX_CONFIG_FEATURE_IP_LINK bool "ip link" default BUSYBOX_DEFAULT_FEATURE_IP_LINK depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK help - Configure network devices with "ip". + Configure network devices with "ip". config BUSYBOX_CONFIG_FEATURE_IP_ROUTE bool "ip route" default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE help - Add support for routing table management to "ip". + Add support for routing table management to "ip". config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR string "ip route configuration directory" default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE help - Location of the "ip" applet routing configuration. + Location of the "ip" applet routing configuration. config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL bool "ip tunnel" default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL help - Add support for tunneling commands to "ip". + Add support for tunneling commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_RULE bool "ip rule" default BUSYBOX_DEFAULT_FEATURE_IP_RULE depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE help - Add support for rule commands to "ip". + Add support for rule commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_NEIGH bool "ip neighbor" default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH help - Add support for neighbor commands to "ip". + Add support for neighbor commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS bool "Support displaying rarely used link types" default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH help - If you are not going to use links of type "frad", "econet", - "bif" etc, you probably don't need to enable this. - Ethernet, wireless, infrared, ppp/slip, ip tunnelling - link types are supported without this option selected. + If you are not going to use links of type "frad", "econet", + "bif" etc, you probably don't need to enable this. + Ethernet, wireless, infrared, ppp/slip, ip tunnelling + link types are supported without this option selected. config BUSYBOX_CONFIG_IPCALC bool "ipcalc" default BUSYBOX_DEFAULT_IPCALC help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. + ipcalc takes an IP address and netmask and calculates the + resulting broadcast, network, and host range. config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS bool "Enable long options" @@ -587,39 +587,39 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY depends on BUSYBOX_CONFIG_IPCALC help - Adds the options hostname, prefix and silent to the output of - "ipcalc". + Adds the options hostname, prefix and silent to the output of + "ipcalc". config BUSYBOX_CONFIG_FAKEIDENTD bool "fakeidentd" default BUSYBOX_DEFAULT_FAKEIDENTD select BUSYBOX_CONFIG_FEATURE_SYSLOG help - fakeidentd listens on the ident port and returns a predefined - fake value on any query. + fakeidentd listens on the ident port and returns a predefined + fake value on any query. config BUSYBOX_CONFIG_NAMEIF bool "nameif" default BUSYBOX_DEFAULT_NAMEIF select BUSYBOX_CONFIG_PLATFORM_LINUX select BUSYBOX_CONFIG_FEATURE_SYSLOG help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IFNAMSIZ = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX + nameif is used to rename network interface by its MAC address. + Renamed interfaces MUST be in the down state. + It is possible to use a file (default: /etc/mactab) + with list of new interface names and MACs. + Maximum interface name length: IFNAMSIZ = 16 + File fields are separated by space or tab. + File format: + # Comment + new_interface_name XX:XX:XX:XX:XX:XX config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED bool "Extended nameif" default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED depends on BUSYBOX_CONFIG_NAMEIF help - This extends the nameif syntax to support the bus_info, driver, - phyaddr selectors. The syntax is compatible to the normal nameif. - File format: + This extends the nameif syntax to support the bus_info, driver, + phyaddr selectors. The syntax is compatible to the normal nameif. + File format: new_interface_name driver=asix bus=usb-0000:00:08.2-3 new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 new_interface_name phy_address=2 00:80:C8:38:91:B5 @@ -629,77 +629,77 @@ config BUSYBOX_CONFIG_NBDCLIENT bool "nbd-client" default BUSYBOX_DEFAULT_NBDCLIENT help - Network block device client + Network block device client config BUSYBOX_CONFIG_NC bool "nc" default BUSYBOX_DEFAULT_NC help - A simple Unix utility which reads and writes data across network - connections. + A simple Unix utility which reads and writes data across network + connections. config BUSYBOX_CONFIG_NC_SERVER bool "Netcat server options (-l)" default BUSYBOX_DEFAULT_NC_SERVER depends on BUSYBOX_CONFIG_NC help - Allow netcat to act as a server. + Allow netcat to act as a server. config BUSYBOX_CONFIG_NC_EXTRA bool "Netcat extensions (-eiw and -f FILE)" default BUSYBOX_DEFAULT_NC_EXTRA depends on BUSYBOX_CONFIG_NC help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). config BUSYBOX_CONFIG_NC_110_COMPAT bool "Netcat 1.10 compatibility (+2.5k)" default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob depends on BUSYBOX_CONFIG_NC help - This option makes nc closely follow original nc-1.10. - The code is about 2.5k bigger. It enables - -s ADDR, -n, -u, -v, -o FILE, -z options, but loses - busybox-specific extensions: -f FILE. + This option makes nc closely follow original nc-1.10. + The code is about 2.5k bigger. It enables + -s ADDR, -n, -u, -v, -o FILE, -z options, but loses + busybox-specific extensions: -f FILE. config BUSYBOX_CONFIG_NETMSG bool "netmsg" default BUSYBOX_DEFAULT_NETMSG help - simple program for sending udp broadcast messages + simple program for sending udp broadcast messages config BUSYBOX_CONFIG_NETSTAT bool "netstat" default BUSYBOX_DEFAULT_NETSTAT select BUSYBOX_CONFIG_PLATFORM_LINUX help - netstat prints information about the Linux networking subsystem. + netstat prints information about the Linux networking subsystem. config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE bool "Enable wide output" default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE depends on BUSYBOX_CONFIG_NETSTAT help - Add support for wide columns. Useful when displaying IPv6 addresses - (-W option). + Add support for wide columns. Useful when displaying IPv6 addresses + (-W option). config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG bool "Enable PID/Program name output" default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG depends on BUSYBOX_CONFIG_NETSTAT help - Add support for -p flag to print out PID and program name. - +700 bytes of code. + Add support for -p flag to print out PID and program name. + +700 bytes of code. config BUSYBOX_CONFIG_NSLOOKUP bool "nslookup" default BUSYBOX_DEFAULT_NSLOOKUP help - nslookup is a tool to query Internet name servers. + nslookup is a tool to query Internet name servers. config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT bool "nslookup_lede" depends on !BUSYBOX_CONFIG_NSLOOKUP default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT help - nslookup is a tool to query Internet name servers (OpenWrt flavor). + nslookup is a tool to query Internet name servers (OpenWrt flavor). config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS bool "Enable long options" @@ -712,107 +712,107 @@ config BUSYBOX_CONFIG_NTPD default BUSYBOX_DEFAULT_NTPD select BUSYBOX_CONFIG_PLATFORM_LINUX help - The NTP client/server daemon. + The NTP client/server daemon. config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER bool "Make ntpd usable as a NTP server" default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER depends on BUSYBOX_CONFIG_NTPD help - Make ntpd usable as a NTP server. If you disable this option - ntpd will be usable only as a NTP client. + Make ntpd usable as a NTP server. If you disable this option + ntpd will be usable only as a NTP client. config BUSYBOX_CONFIG_FEATURE_NTPD_CONF bool "Make ntpd understand /etc/ntp.conf" default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF depends on BUSYBOX_CONFIG_NTPD help - Make ntpd look in /etc/ntp.conf for peers. Only "server address" - is supported. + Make ntpd look in /etc/ntp.conf for peers. Only "server address" + is supported. config BUSYBOX_CONFIG_PING bool "ping" default BUSYBOX_DEFAULT_PING select BUSYBOX_CONFIG_PLATFORM_LINUX help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. + ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to + elicit an ICMP ECHO_RESPONSE from a host or gateway. config BUSYBOX_CONFIG_PING6 bool "ping6" default BUSYBOX_DEFAULT_PING6 depends on BUSYBOX_CONFIG_FEATURE_IPV6 help - This will give you a ping that can talk IPv6. + This will give you a ping that can talk IPv6. config BUSYBOX_CONFIG_FEATURE_FANCY_PING bool "Enable fancy ping output" default BUSYBOX_DEFAULT_FEATURE_FANCY_PING depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6 help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. + Make the output from the ping applet include statistics, and at the + same time provide full support for ICMP packets. config BUSYBOX_CONFIG_PSCAN bool "pscan" default BUSYBOX_DEFAULT_PSCAN help - Simple network port scanner. + Simple network port scanner. config BUSYBOX_CONFIG_ROUTE bool "route" default BUSYBOX_DEFAULT_ROUTE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Route displays or manipulates the kernel's IP routing tables. + Route displays or manipulates the kernel's IP routing tables. config BUSYBOX_CONFIG_SLATTACH bool "slattach" default BUSYBOX_DEFAULT_SLATTACH select BUSYBOX_CONFIG_PLATFORM_LINUX help - slattach is a small utility to attach network interfaces to serial - lines. + slattach is a small utility to attach network interfaces to serial + lines. config BUSYBOX_CONFIG_SSL_CLIENT bool "ssl_client" default BUSYBOX_DEFAULT_SSL_CLIENT select BUSYBOX_CONFIG_TLS help - This tool pipes data to/from a socket, TLS-encrypting it. + This tool pipes data to/from a socket, TLS-encrypting it. config BUSYBOX_CONFIG_TCPSVD bool "tcpsvd" default BUSYBOX_DEFAULT_TCPSVD help - tcpsvd listens on a TCP port and runs a program for each new - connection. + tcpsvd listens on a TCP port and runs a program for each new + connection. config BUSYBOX_CONFIG_UDPSVD bool "udpsvd" default BUSYBOX_DEFAULT_UDPSVD help - udpsvd listens on an UDP port and runs a program for each new - connection. + udpsvd listens on an UDP port and runs a program for each new + connection. config BUSYBOX_CONFIG_TELNET bool "telnet" default BUSYBOX_DEFAULT_TELNET help - Telnet is an interface to the TELNET protocol, but is also commonly - used to test other simple protocols. + Telnet is an interface to the TELNET protocol, but is also commonly + used to test other simple protocols. config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE bool "Pass TERM type to remote host" default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE depends on BUSYBOX_CONFIG_TELNET help - Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that - things like ANSI colors and other control sequences behave. + Setting this option will forward the TERM environment variable to the + remote host you are connecting to. This is useful to make sure that + things like ANSI colors and other control sequences behave. config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN bool "Pass USER type to remote host" default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN depends on BUSYBOX_CONFIG_TELNET help - Setting this option will forward the USER environment variable to the - remote host you are connecting to. This is useful when you need to - log into a machine without telling the username (autologin). This - option enables `-a' and `-l USER' arguments. + Setting this option will forward the USER environment variable to the + remote host you are connecting to. This is useful when you need to + log into a machine without telling the username (autologin). This + option enables `-a' and `-l USER' arguments. config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH bool "Enable window size autodetection" @@ -823,86 +823,86 @@ config BUSYBOX_CONFIG_TELNETD default BUSYBOX_DEFAULT_TELNETD select BUSYBOX_CONFIG_FEATURE_SYSLOG help - A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a - more secure alternative, you should seriously consider installing the - very small Dropbear SSH daemon instead: + A daemon for the TELNET protocol, allowing you to log onto the host + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a + more secure alternative, you should seriously consider installing the + very small Dropbear SSH daemon instead: http://matt.ucc.asn.au/dropbear/dropbear.html - Note that for busybox telnetd to work you need several things: - First of all, your kernel needs: + Note that for busybox telnetd to work you need several things: + First of all, your kernel needs: CONFIG_UNIX98_PTYS=y - Next, you need a /dev/pts directory on your root filesystem: + Next, you need a /dev/pts directory on your root filesystem: $ ls -ld /dev/pts drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ - Next you need the pseudo terminal master multiplexer /dev/ptmx: + Next you need the pseudo terminal master multiplexer /dev/ptmx: $ ls -la /dev/ptmx crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx - Any /dev/ttyp[0-9]* files you may have can be removed. - Next, you need to mount the devpts filesystem on /dev/pts using: + Any /dev/ttyp[0-9]* files you may have can be removed. + Next, you need to mount the devpts filesystem on /dev/pts using: mount -t devpts devpts /dev/pts - You need to be sure that busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make - certain that Busybox has been installed setuid root: + You need to be sure that busybox has LOGIN and + FEATURE_SUID enabled. And finally, you should make + certain that Busybox has been installed setuid root: chown root.root /bin/busybox chmod 4755 /bin/busybox - with all that done, telnetd _should_ work.... + with all that done, telnetd _should_ work.... config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE bool "Support standalone telnetd (not inetd only)" default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE depends on BUSYBOX_CONFIG_TELNETD help - Selecting this will make telnetd able to run standalone. + Selecting this will make telnetd able to run standalone. config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT bool "Support -w SEC option (inetd wait mode)" default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE help - This option allows you to run telnetd in "inet wait" mode. - Example inetd.conf line (note "wait", not usual "nowait"): + This option allows you to run telnetd in "inet wait" mode. + Example inetd.conf line (note "wait", not usual "nowait"): - telnet stream tcp wait root /bin/telnetd telnetd -w10 + telnet stream tcp wait root /bin/telnetd telnetd -w10 - In this example, inetd passes _listening_ socket_ as fd 0 - to telnetd when connection appears. - telnetd will wait for connections until all existing - connections are closed, and no new connections - appear during 10 seconds. Then it exits, and inetd continues - to listen for new connections. + In this example, inetd passes _listening_ socket_ as fd 0 + to telnetd when connection appears. + telnetd will wait for connections until all existing + connections are closed, and no new connections + appear during 10 seconds. Then it exits, and inetd continues + to listen for new connections. - This option is rarely used. "tcp nowait" is much more usual - way of running tcp services, including telnetd. - You most probably want to say N here. + This option is rarely used. "tcp nowait" is much more usual + way of running tcp services, including telnetd. + You most probably want to say N here. config BUSYBOX_CONFIG_TFTP bool "tftp" default BUSYBOX_DEFAULT_TFTP help - This enables the Trivial File Transfer Protocol client program. TFTP - is usually used for simple, small transfers such as a root image - for a network-enabled bootloader. + This enables the Trivial File Transfer Protocol client program. TFTP + is usually used for simple, small transfers such as a root image + for a network-enabled bootloader. config BUSYBOX_CONFIG_TFTPD bool "tftpd" default BUSYBOX_DEFAULT_TFTPD help - This enables the Trivial File Transfer Protocol server program. - It expects that stdin is a datagram socket and a packet - is already pending on it. It will exit after one transfer. - In other words: it should be run from inetd in nowait mode, - or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" comment "Common options for tftp/tftpd" depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD @@ -912,29 +912,29 @@ config BUSYBOX_CONFIG_FEATURE_TFTP_GET default BUSYBOX_DEFAULT_FEATURE_TFTP_GET depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the GET command within the TFTP client. This allows - a client to retrieve a file from a TFTP server. - Also enable upload support in tftpd, if tftpd is selected. + Add support for the GET command within the TFTP client. This allows + a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. - Note: this option does _not_ make tftpd capable of download - (the usual operation people need from it)! + Note: this option does _not_ make tftpd capable of download + (the usual operation people need from it)! config BUSYBOX_CONFIG_FEATURE_TFTP_PUT bool "Enable 'tftp put' and/or tftpd download code" default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the PUT command within the TFTP client. This allows - a client to transfer a file to a TFTP server. - Also enable download support in tftpd, if tftpd is selected. + Add support for the PUT command within the TFTP client. This allows + a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE bool "Enable 'blksize' and 'tsize' protocol options" default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Allow tftp to specify block size, and tftpd to understand - "blksize" and "tsize" options. + Allow tftp to specify block size, and tftpd to understand + "blksize" and "tsize" options. config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR bool "Enable progress bar" @@ -946,8 +946,8 @@ config BUSYBOX_CONFIG_TFTP_DEBUG default BUSYBOX_DEFAULT_TFTP_DEBUG depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Make tftp[d] print debugging messages on stderr. - This is useful if you are diagnosing a bug in tftp[d]. + Make tftp[d] print debugging messages on stderr. + This is useful if you are diagnosing a bug in tftp[d]. config BUSYBOX_CONFIG_TLS bool #No description makes it a hidden option default BUSYBOX_DEFAULT_TLS @@ -956,22 +956,22 @@ config BUSYBOX_CONFIG_TRACEROUTE default BUSYBOX_DEFAULT_TRACEROUTE select BUSYBOX_CONFIG_PLATFORM_LINUX help - Utility to trace the route of IP packets. + Utility to trace the route of IP packets. config BUSYBOX_CONFIG_TRACEROUTE6 bool "traceroute6" default BUSYBOX_DEFAULT_TRACEROUTE6 depends on BUSYBOX_CONFIG_FEATURE_IPV6 help - Utility to trace the route of IPv6 packets. + Utility to trace the route of IPv6 packets. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE bool "Enable verbose output" default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 help - Add some verbosity to traceroute. This includes among other things - hostnames and ICMP response types. + Add some verbosity to traceroute. This includes among other things + hostnames and ICMP response types. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP bool "Enable -I option (use ICMP instead of UDP)" @@ -982,27 +982,27 @@ config BUSYBOX_CONFIG_TUNCTL default BUSYBOX_DEFAULT_TUNCTL select BUSYBOX_CONFIG_PLATFORM_LINUX help - tunctl creates or deletes tun devices. + tunctl creates or deletes tun devices. config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG bool "Support owner:group assignment" default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG depends on BUSYBOX_CONFIG_TUNCTL help - Allow to specify owner and group of newly created interface. - 340 bytes of pure bloat. Say no here. + Allow to specify owner and group of newly created interface. + 340 bytes of pure bloat. Say no here. config BUSYBOX_CONFIG_VCONFIG bool "vconfig" default BUSYBOX_DEFAULT_VCONFIG select BUSYBOX_CONFIG_PLATFORM_LINUX help - Creates, removes, and configures VLAN interfaces + Creates, removes, and configures VLAN interfaces config BUSYBOX_CONFIG_WGET bool "wget" default BUSYBOX_DEFAULT_WGET help - wget is a utility for non-interactive download of files from HTTP - and FTP servers. + wget is a utility for non-interactive download of files from HTTP + and FTP servers. config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS bool "Enable long options" @@ -1019,21 +1019,21 @@ config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION depends on BUSYBOX_CONFIG_WGET help - Support authenticated HTTP transfers. + Support authenticated HTTP transfers. config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT bool "Enable timeout option -T SEC" default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT depends on BUSYBOX_CONFIG_WGET help - Supports network read and connect timeouts for wget, - so that wget will give up and timeout, through the -T - command line option. + Supports network read and connect timeouts for wget, + so that wget will give up and timeout, through the -T + command line option. - Currently only connect and network data read timeout are - supported (i.e., timeout is not applied to the DNS query). When - FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option - will work in addition to -T. + Currently only connect and network data read timeout are + supported (i.e., timeout is not applied to the DNS query). When + FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option + will work in addition to -T. config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS bool "Support HTTPS using internal TLS code" @@ -1041,85 +1041,85 @@ config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS depends on BUSYBOX_CONFIG_WGET select BUSYBOX_CONFIG_TLS help - wget will use internal TLS code to connect to https:// URLs. - Note: - On NOMMU machines, ssl_helper applet should be available - in the $PATH for this to work. Make sure to select that applet. - - Note: currently, TLS code only makes TLS I/O work, it - does *not* check that the peer is who it claims to be, etc. - IOW: it uses peer-supplied public keys to establish encryption - and signing keys, then encrypts and signs outgoing data and - decrypts incoming data. - It does not check signature hashes on the incoming data: - this means that attackers manipulating TCP packets can - send altered data and we unknowingly receive garbage. - (This check might be relatively easy to add). - It does not check public key's certificate: - this means that the peer may be an attacker impersonating - the server we think we are talking to. - - If you think this is unacceptable, consider this. As more and more - servers switch to HTTPS-only operation, without such "crippled" - TLS code it is *impossible* to simply download a kernel source - from kernel.org. Which can in real world translate into - "my small automatic tooling to build cross-compilers from sources - no longer works, I need to additionally keep a local copy - of ~4 megabyte source tarball of a SSL library and ~2 megabyte - source of wget, need to compile and built both before I can - download anything. All this despite the fact that the build - is done in a QEMU sandbox on a machine with absolutely nothing - worth stealing, so I don't care if someone would go to a lot - of trouble to intercept my HTTPS download to send me an altered - kernel tarball". - - If you still think this is unacceptable, send patches. - - If you still think this is unacceptable, do not want to send - patches, but do want to waste bandwidth expaining how wrong - it is, you will be ignored. + wget will use internal TLS code to connect to https:// URLs. + Note: + On NOMMU machines, ssl_helper applet should be available + in the $PATH for this to work. Make sure to select that applet. + + Note: currently, TLS code only makes TLS I/O work, it + does *not* check that the peer is who it claims to be, etc. + IOW: it uses peer-supplied public keys to establish encryption + and signing keys, then encrypts and signs outgoing data and + decrypts incoming data. + It does not check signature hashes on the incoming data: + this means that attackers manipulating TCP packets can + send altered data and we unknowingly receive garbage. + (This check might be relatively easy to add). + It does not check public key's certificate: + this means that the peer may be an attacker impersonating + the server we think we are talking to. + + If you think this is unacceptable, consider this. As more and more + servers switch to HTTPS-only operation, without such "crippled" + TLS code it is *impossible* to simply download a kernel source + from kernel.org. Which can in real world translate into + "my small automatic tooling to build cross-compilers from sources + no longer works, I need to additionally keep a local copy + of ~4 megabyte source tarball of a SSL library and ~2 megabyte + source of wget, need to compile and built both before I can + download anything. All this despite the fact that the build + is done in a QEMU sandbox on a machine with absolutely nothing + worth stealing, so I don't care if someone would go to a lot + of trouble to intercept my HTTPS download to send me an altered + kernel tarball". + + If you still think this is unacceptable, send patches. + + If you still think this is unacceptable, do not want to send + patches, but do want to waste bandwidth expaining how wrong + it is, you will be ignored. config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL bool "Try to connect to HTTPS using openssl" default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL depends on BUSYBOX_CONFIG_WGET help - Try to use openssl to handle HTTPS. - - OpenSSL has a simple SSL client for debug purposes. - If you select this option, wget will effectively run: - "openssl s_client -quiet -connect hostname:443 - -servername hostname 2>/dev/null" and pipe its data - through it. -servername is not used if hostname is numeric. - Note inconvenient API: host resolution is done twice, - and there is no guarantee openssl's idea of IPv6 address - format is the same as ours. - Another problem is that s_client prints debug information - to stderr, and it needs to be suppressed. This means - all error messages get suppressed too. - openssl is also a big binary, often dynamically linked - against ~15 libraries. - - If openssl can't be executed, internal TLS code will be used - (if you enabled it); if openssl can be executed but fails later, - wget can't detect this, and download will fail. + Try to use openssl to handle HTTPS. + + OpenSSL has a simple SSL client for debug purposes. + If you select this option, wget will effectively run: + "openssl s_client -quiet -connect hostname:443 + -servername hostname 2>/dev/null" and pipe its data + through it. -servername is not used if hostname is numeric. + Note inconvenient API: host resolution is done twice, + and there is no guarantee openssl's idea of IPv6 address + format is the same as ours. + Another problem is that s_client prints debug information + to stderr, and it needs to be suppressed. This means + all error messages get suppressed too. + openssl is also a big binary, often dynamically linked + against ~15 libraries. + + If openssl can't be executed, internal TLS code will be used + (if you enabled it); if openssl can be executed but fails later, + wget can't detect this, and download will fail. config BUSYBOX_CONFIG_WHOIS bool "whois" default BUSYBOX_DEFAULT_WHOIS help - whois is a client for the whois directory service + whois is a client for the whois directory service config BUSYBOX_CONFIG_ZCIP bool "zcip" default BUSYBOX_DEFAULT_ZCIP select BUSYBOX_CONFIG_PLATFORM_LINUX select BUSYBOX_CONFIG_FEATURE_SYSLOG help - ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. - It's a daemon that allocates and defends a dynamically assigned - address on the 169.254/16 network, requiring no system administrator. + ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. + It's a daemon that allocates and defends a dynamically assigned + address on the 169.254/16 network, requiring no system administrator. - See http://www.zeroconf.org for further details, and "zcip.script" - in the busybox examples. + See http://www.zeroconf.org for further details, and "zcip.script" + in the busybox examples. source udhcp/Config.in @@ -1128,8 +1128,8 @@ config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help - Command line options to pass to udhcpc from ifup. - Intended to alter options not available in /etc/network/interfaces. - (IE: --syslog --background etc...) + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) endmenu -- cgit v1.2.3