From 56231056ea784f1cec6450f649b1adaed1f56366 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. SVN-Revision: 8653 --- .../adm5120/base-files/default/sbin/wget2nand | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100755 target/linux/adm5120/base-files/default/sbin/wget2nand (limited to 'target/linux/adm5120/base-files') diff --git a/target/linux/adm5120/base-files/default/sbin/wget2nand b/target/linux/adm5120/base-files/default/sbin/wget2nand new file mode 100755 index 0000000000..adb56b946f --- /dev/null +++ b/target/linux/adm5120/base-files/default/sbin/wget2nand @@ -0,0 +1,64 @@ +#!/bin/sh +# wget2nand +# This script can be used to download a TGZ file from your build system which +# contains the files to be installed on the NAND flash on your RB1xx card. +# The one parameter is the URL of the TGZ file to be downloaded. +# Licence GPL V2 +# Author david.goodenough@linkchoose.co.uk +# Based on cf2nand from RB532 support +. /etc/functions.sh + +[ -d /tmp/wget2nand ] && { + echo "/tmp/wget2nand already exists" + exit 1 +} + +# first get an address for br-lan using udhcpc +killall udhcpc +/sbin/udhcpc -i br-lan + +# need to find the wget server from the command line +url=$1 +[ -z "$url" ] && { + echo "No URL specified for image TGZ" + echo "Usage : $0 URL" + exit 1 +} + +boot="$(find_mtd_part 'RouterBoard NAND Boot')" +main="$(find_mtd_part 'rootfs')" +[ -z "$boot" -o -z "$main" ] && { + echo "Cannot find NAND Flash partitions" + exit 1 +} + +echo "Erasing filesystem." +mtd erase Boot 2>/dev/null >/dev/null +mtd erase Main 2>/dev/null >/dev/null + +echo "Mounting $main as new root and $boot as boot partition" + +mkdir /tmp/wget2nand/ +mkdir /tmp/wget2nand-boot +mount -t yaffs2 "$main" /tmp/wget2nand/ +mount -t yaffs2 "$boot" /tmp/wget2nand-boot + +echo "Copying filesystem..." +( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz ) +wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-vmlinux + +chmod +x /tmp/wget2nand-boot/kernel + +# make sure everything is written before we unmount the partitions +echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission +sync +ls /tmp/wget2nand-boot/ +ls /tmp/wget2nand/ +# unmount the partitions and remove the directories into which they were mounted +umount /tmp/wget2nand-boot +umount /tmp/wget2nand +rmdir /tmp/wget2nand-boot +rmdir /tmp/wget2nand + +# all done +echo "Image written, you can now reboot. Remember to change the boot source to Boot from Nand" -- cgit v1.2.3