From e90dc8d27221bf00daa7c49a986cc0bac6f2e070 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 17 Dec 2017 15:00:01 +0100 Subject: apm821xx: convert to device-tree board detection This patch converts all apm821xx devices to the device-tree board-detection method. All instances of the legacy boardnames (mbl,mr24,...) are converted to "vendor,device" identifier. The custom board-detection code in apm821xx.sh is removed as it no longer serves any purpose. Signed-off-by: Mathias Kresin Signed-off-by: Christian Lamparter --- target/linux/apm821xx/base-files/etc/board.d/01_leds | 9 +++++---- target/linux/apm821xx/base-files/etc/board.d/02_network | 9 +++++---- .../apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 4 ++-- 3 files changed, 12 insertions(+), 10 deletions(-) (limited to 'target/linux/apm821xx/base-files/etc') diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds index 3b5fb721ae..c218efa49b 100755 --- a/target/linux/apm821xx/base-files/etc/board.d/01_leds +++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds @@ -7,7 +7,7 @@ board_config_update board=$(board_name) case "$board" in -mr24) +meraki,mr24) ucidef_set_led_netdev "wan" "WAN" "mr24:green:wan" "eth0" ucidef_set_led_wlan "wlan1" "WLAN1" "mr24:green:wifi1" "phy0assoc" ucidef_set_led_wlan "wlan2" "WLAN2" "mr24:green:wifi2" "phy0assoc" @@ -15,7 +15,7 @@ mr24) ucidef_set_led_wlan "wlan4" "WLAN4" "mr24:green:wifi4" "phy0tpt" ;; -mx60) +meraki,mx60) ucidef_set_led_switch "wan" "WAN" "mx60:green:wan" "switch0" "0x20" ucidef_set_led_switch "lan1" "LAN1" "mx60:green:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "mx60:green:lan2" "switch0" "0x08" @@ -23,11 +23,12 @@ mx60) ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02" ;; -mbl) +wd,mybooklive|\ +wd,mybooklive-duo) ucidef_set_led_ide "sata" "SATA" "mbl:blue:power" ;; -wndr4700) +netgear,wndr4700) ucidef_set_led_ide "sata" "SATA" "wndr4700:green:hd" ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20" ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx" diff --git a/target/linux/apm821xx/base-files/etc/board.d/02_network b/target/linux/apm821xx/base-files/etc/board.d/02_network index 03df7cb49f..6f4456e8a1 100755 --- a/target/linux/apm821xx/base-files/etc/board.d/02_network +++ b/target/linux/apm821xx/base-files/etc/board.d/02_network @@ -8,13 +8,14 @@ board_config_update board=$(board_name) case "$board" in -mbl|\ -mr24) +meraki,mr24|\ +wd,mybooklive|\ +wd,mybooklive-duo) ucidef_set_interface_lan "eth0" ;; -mx60|\ -wndr4700) +meraki,mx60|\ +netgear,wndr4700) ucidef_add_switch "switch0" \ "0@eth0" "4:lan" "3:lan" "2:lan" "1:lan" "5:wan" ;; diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 4a7e1c0b19..7a13a0afa8 100644 --- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -52,7 +52,7 @@ board=$(board_name) case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in - wndr4700) + netgear,wndr4700) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then @@ -70,7 +70,7 @@ case "$FIRMWARE" in "pci_wmac1.eeprom") case $board in - wndr4700) + netgear,wndr4700) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then -- cgit v1.2.3