From 9fec39a03388677ce5c8e56de8f049391b8c4ed7 Mon Sep 17 00:00:00 2001 From: Federico Cappon Date: Fri, 9 Jun 2017 15:11:39 +0000 Subject: ar71xx: add support for TP-Link TL-WA855RE v1 TP-Link TL-WA855RE v1 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/397/198 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x external antennas - 2x LED (green and orange in the same package), 2x button - UART: TP5(TX) and TP4(RX) test points on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in EU version of the device, but should work also with the same device version sold in other countries. Signed-off-by: Federico Cappon --- target/linux/ar71xx/base-files/etc/diag.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/diag.sh') diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 936a1148d0..0bb338a573 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -369,6 +369,7 @@ get_status_led() { tl-wa850re-v2) status_led="tp-link:blue:re" ;; + tl-wa855re-v1|\ tl-wa860re) status_led="tp-link:green:power" ;; -- cgit v1.2.3