From 650a5e993b3b252da511e90706f3759d5ea68ce1 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Tue, 23 Jan 2018 21:37:16 +0100 Subject: ar71xx: add support for COMFAST CF-E385AC COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 256 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100/1000 Mbps Ethernet, with PoE support - 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L) - 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11) - 7x internal antennas - 1x RGB LED (driven by GPIO) - 1x button (reset) - UART, LEDs/GPIO and USB headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/base-files/etc/board.d/01_leds | 13 +++++++++++-- target/linux/ar71xx/base-files/etc/board.d/02_network | 5 +++++ target/linux/ar71xx/base-files/etc/diag.sh | 3 ++- .../base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 3 +++ 4 files changed, 21 insertions(+), 3 deletions(-) (limited to 'target/linux/ar71xx/base-files/etc') diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 85f104a5fd..1b308d7f77 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -218,10 +218,19 @@ cf-e375ac) cf-e355ac-v1|\ cf-e355ac-v2|\ cf-e380ac-v1|\ -cf-e380ac-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" +cf-e380ac-v2|\ +cf-e385ac) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt" + + case "$board" in + cf-e385ac) + ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x04" + ;; + *) + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ;; + esac ;; cf-e520n|\ cf-e530n) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 0fe71e0760..434056a344 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -266,6 +266,11 @@ ar71xx_setup_interfaces() rme-eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; + cf-e385ac) + ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan" "1:wan" "6@eth1" + ;; cpe210|\ cpe510|\ wbs210|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index facc77ee60..232e43b8dc 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -149,7 +149,8 @@ get_status_led() { status_led="$board:blue:wlan" ;; cf-e380ac-v1|\ - cf-e380ac-v2) + cf-e380ac-v2|\ + cf-e385ac) status_led="$board:blue:wlan2g" ;; cpe510) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 3aa5e3c90f..a3d4867b0b 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -161,6 +161,9 @@ case "$FIRMWARE" in ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; + cf-e385ac) + ath10kcal_extract "art" 20480 12064 + ;; esac ;; *) -- cgit v1.2.3