From ed35253f4c612499f6966dcd408a7583f1663a04 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 4 Nov 2012 22:08:54 +0000
Subject: ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
---
target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
(limited to 'target/linux/ar71xx/files')
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
index 3a6fe21ed2..bc79ab9953 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
@@ -27,7 +27,7 @@
#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
#define ZCN_1523H_2_GPIO_LED_STRONG 15
-#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
+#define ZCN_1523H_5_GPIO_LAN2_POWER 1
#define ZCN_1523H_5_GPIO_LED_LAN2 13
#define ZCN_1523H_5_GPIO_LED_WEAK 14
#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
@@ -92,9 +92,6 @@ static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
.name = "zcn-1523h:green:lan2",
.gpio = ZCN_1523H_5_GPIO_LED_LAN2,
.active_low = 1,
- }, {
- .name = "zcn-1523h:amber:unknown",
- .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
}
};
--
cgit v1.2.3