From 51dd8ec62ffc570dd932cc3fb5d5c9b1bb756349 Mon Sep 17 00:00:00 2001 From: Zoltan HERPAI Date: Wed, 20 Jun 2018 16:21:07 +0200 Subject: ath79: add Netgear WNR612 v2 Netgear WNR612 v2: - cpu Atheros AR7240 (Python) @400MHz - flash 4MB - ram 32MB - ethernet 10/100: 1xwan + 2xlan (only two) - radio AR9285 As there is a rebranded WNR612v2 called ON Networks N150R, add a dtsi which includes all device support, and add a separate dts for the device only (with a separate one for the subsequent N150R). Signed-off-by: Zoltan HERPAI --- target/linux/ath79/base-files/etc/board.d/01_leds | 5 +++++ target/linux/ath79/base-files/etc/board.d/02_network | 6 ++++++ .../linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 1 + 3 files changed, 12 insertions(+) (limited to 'target/linux/ath79/base-files/etc') diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 92b7e7da3e..68f94ed3c3 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -22,6 +22,11 @@ case "$board" in ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33" ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore" ;; +"netgear,wnr612-v2") + ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" + ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" + ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" + ;; "tplink,tl-mr3020-v1") ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x02" ;; diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index f734518f69..2caf443fe8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -33,6 +33,12 @@ ath79_setup_interfaces() ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + "netgear,wnr612-v2") + ucidef_set_interfaces_lan_wan "eth1.1" "eth0" + ucidef_add_switch "switch0" \ + "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4" + ;; + "tplink,tl-mr3020-v1") ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "0@eth0" "1:lan" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 498cc4e6cb..1ed74608c8 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -54,6 +54,7 @@ case "$FIRMWARE" in "tplink,tl-wdr4300") ath9k_eeprom_extract "art" 20480 1088 ;; + "netgear,wnr612-v2"|\ "tplink,tl-wr740n-v2"|\ "ubnt,unifi") ath9k_eeprom_extract "art" 4096 2048 -- cgit v1.2.3