From 5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21 Mon Sep 17 00:00:00 2001 From: Andrew Cameron Date: Wed, 6 Nov 2019 20:12:55 -0600 Subject: ath79: add support for the TP-LINK WBS510 V2 This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts (limited to 'target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts') diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts new file mode 100644 index 0000000000..5c55d78904 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpexxx-v1.dtsi" + +/ { + compatible = "tplink,wbs510-v2", "qca,ar9344"; + model = "TP-Link WBS510 v2"; +}; + +&led_link4 { + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; +}; -- cgit v1.2.3