From 9d8fcab77aab6a9133cd6898a68ad512b0b31310 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Thu, 6 Dec 2018 11:53:05 +0100 Subject: ath79: fix GL.iNet GL-AR300M sysupgrade The userspace boardname derived from the dts compatible was out of sync with the expected board added to the image metadata. This way a sysupgrade is refused. Sync the userspace boardname and the baordname used in the image metdata to allow a seamless sasupgrade. Signed-off-by: Mathias Kresin --- .../linux/ath79/dts/qca9531_glinet_ar300m-nor.dts | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts (limited to 'target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts') diff --git a/target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts new file mode 100644 index 0000000000..36903bdb99 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +#include +#include + +#include "qca9531_glinet_ar300m.dtsi" + +/ { + compatible = "glinet,ar300m-nor", "qca,qca9531"; + model = "GL.iNet GL-AR300M (NOR)"; +}; + +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@1 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@2 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@3 { + label = "art"; + reg = <0xff0000 0x010000>; + }; + }; + }; +}; -- cgit v1.2.3