From af56075a8ff760832df27546325428f2497a0121 Mon Sep 17 00:00:00 2001 From: Roberto Valentini Date: Thu, 1 Jul 2021 11:56:30 +0200 Subject: ath79: add support for TP-Link RE455 v1 TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini --- target/linux/ath79/dts/qca9563_tplink_re455-v1.dts | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_tplink_re455-v1.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts new file mode 100644 index 0000000000..b6c1efb846 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_tplink_re450.dtsi" + +/ { + compatible = "tplink,re455-v1", "qca,qca9563"; + model = "TP-Link RE455 v1"; +}; + +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + info: partition@20000 { + label = "info"; + reg = <0x020000 0x002000>; + read-only; + }; + + partition@22000 { + label = "partition-table"; + reg = <0x022000 0x002000>; + read-only; + }; + + partition@24000 { + label = "info2"; + reg = <0x024000 0x00a000>; + read-only; + }; + + partition@2e000 { + label = "config"; + reg = <0x02e000 0x022000>; + read-only; + }; + + partition@50000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x050000 0x7a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; -- cgit v1.2.3