From c65c306d336418f3b6519693d892148f6e2eb38e Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sun, 6 Sep 2020 09:52:43 +0200 Subject: ath79: add support for Wallys DR531 Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Support for this device was first introduced in e767980eb8 (ar71xx target). Specifications: - Qualcomm/Atheros QCA9531 v2 - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of flash (SPI NOR) - 2T2R 2.4 GHz Wi-Fi, with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors (optional IPEX/U.FL) - mini PCIe connector (PCIe/USB buses and mini SIM slot) - 7x LED, 1x button, 1x optional buzzer - UART, JTAG and LED headers on PCB Flash instruction (do it under U-Boot, using UART): tftpb 0x80060000 openwrt-ath79-...-dr531-squashfs-sysupgrade.bin erase 0x9f050000 +$filesize cp.b $fileaddr 0x9f050000 $filesize setenv bootcmd "bootm 0x9f050000" saveenv && reset Signed-off-by: Piotr Dymacz --- target/linux/ath79/generic/base-files/etc/board.d/01_leds | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ath79/generic/base-files/etc/board.d') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index a90aaf0231..2b7b3bed55 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -356,6 +356,15 @@ ubnt,powerbeam-5ac-gen2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100" ;; +wallys,dr531) + ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" + ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x2" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "sig1" "SIG1" "$boardname:green:sig1" "wlan0" "1" "100" + ucidef_set_led_rssi "sig2" "SIG2" "$boardname:green:sig2" "wlan0" "25" "100" + ucidef_set_led_rssi "sig3" "SIG3" "$boardname:green:sig3" "wlan0" "50" "100" + ucidef_set_led_rssi "sig4" "SIG4" "$boardname:green:sig4" "wlan0" "75" "100" + ;; wd,mynet-wifi-rangeextender) ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" ucidef_set_rssimon "wlan0" "200000" "1" -- cgit v1.2.3