From 4ff7bdfeebd4c974b74df74f779fc10891898f5d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=BC=A0=E9=B9=8F?= Date: Fri, 16 Oct 2020 12:53:51 +0200 Subject: ath79: add support for Qxwlan E1700AC v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 2 x 10/1000M Mbps Ethernet (RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 1 x USB 2.0 Port - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input - UART (J5) header on PCB (115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 [cut out of bigger patch, keep swconfig, whitespace fixes] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/generic/base-files/etc/board.d/02_network | 2 ++ .../ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 2 ++ 2 files changed, 4 insertions(+) (limited to 'target/linux/ath79/generic/base-files') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 8f528c33cd..a587cfac96 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -244,6 +244,8 @@ ath79_setup_interfaces() "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" ;; nec,wg1200cr|\ + qxwlan,e1700ac-v2-8m|\ + qxwlan,e1700ac-v2-16m|\ qxwlan,e750g-v8-8m|\ qxwlan,e750g-v8-16m|\ ubnt,nanostation-ac|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 857f566db8..25e864ba72 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -22,6 +22,8 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ devolo,magic-2-wifi|\ + qxwlan,e1700ac-v2-8m|\ + qxwlan,e1700ac-v2-16m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ ubnt,unifiac-mesh|\ -- cgit v1.2.3