From 0070650df45da29a55a89922544dba6859c18f2b Mon Sep 17 00:00:00 2001 From: Michael Pratt Date: Fri, 1 Jan 2021 16:48:52 -0500 Subject: ath79: move small-flash Engenius boards to tiny This moves some of the Engenius boards from generic to tiny: - EAP350 v1 - ECB350 v1 - ENH202 v1 For these, factory.bin builds are already failing on master branch because of the unique situation for these boards: - 8 MB flash - an extra "failsafe" image for recovery - TFTP does not work (barely possible with 600 MTU) - bootloader loads image from a longer flash offset - 1 eraseblock each needed for OKLI kernel loader and fake rootfs - using mtd-concat to make use of remaining space... The manual alternative would be removing the failsafe partition. However this comes with the risk of extremely difficult recovery if a flash ever fails because TFTP on the bootloader is bugged. Signed-off-by: Michael Pratt [improve commit message] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/image/common-engenius.mk | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 target/linux/ath79/image/common-engenius.mk (limited to 'target/linux/ath79/image/common-engenius.mk') diff --git a/target/linux/ath79/image/common-engenius.mk b/target/linux/ath79/image/common-engenius.mk new file mode 100644 index 0000000000..56e8f8cf67 --- /dev/null +++ b/target/linux/ath79/image/common-engenius.mk @@ -0,0 +1,33 @@ +DEVICE_VARS += ENGENIUS_IMGNAME + +# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to +# sysupgrade, as otherwise it will implant the old configuration from +# OEM firmware when writing rootfs from factory.bin +define Build/engenius-tar-gz + -[ -f "$@" ] && \ + mkdir -p $@.tmp && \ + touch $@.tmp/failsafe.bin && \ + echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \ + echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \ + $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \ + $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \ + $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \ + $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \ + $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ + -C $@.tmp . | gzip -9n > $@ && \ + rm -rf $@.tmp +endef + +define Device/engenius_loader_okli + DEVICE_VENDOR := EnGenius + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 + LOADER_TYPE := bin + COMPILE := loader-$(1).bin loader-$(1).uImage + COMPILE/loader-$(1).bin := loader-okli-compile + COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ + uImage lzma + IMAGES += factory.bin + IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \ + append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ + check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME) +endef -- cgit v1.2.3