From bae0d47f2e36376d2876bc4d5557e3e11f80f2fb Mon Sep 17 00:00:00 2001 From: Andrew Cameron Date: Fri, 25 Oct 2019 20:29:36 -0500 Subject: ath79: add support for the TP-LINK CPE220 V3 This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move ð0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron [DTS style fixes/improvements, updated commit message/title] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/image/generic-tp-link.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ath79/image/generic-tp-link.mk') diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 69cb1719e6..a2b112a5ec 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -240,6 +240,18 @@ define Device/tplink_cpe220-v2 endef TARGET_DEVICES += tplink_cpe220-v2 +define Device/tplink_cpe220-v3 + $(Device/tplink-safeloader) + ATH_SOC := qca9533 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE220 + DEVICE_VARIANT := v3 + DEVICE_PACKAGES := rssileds + TPLINK_BOARD_ID := CPE220V3 + LOADER_TYPE := elf +endef +TARGET_DEVICES += tplink_cpe220-v3 + define Device/tplink_cpe510-v1 $(Device/tplink-loader-okli) ATH_SOC := ar9344 -- cgit v1.2.3