From 361c670a468cac8def368ed95487c72cfdb4a3fa Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Wed, 3 Jun 2020 21:15:09 +0200 Subject: ath79: add support for D-Link DAP-1330/DAP-1365 A1 Port device support for DAP-1330 from the ar71xx target to ath79. Additionally, images are generated for the European through-socket case variant DAP-1365. Both devices run the same vendor firmware, the only difference being the DAP_SIGNATURE field in the factory header. The vendor's Web UI will display a model string stored in the flash. Specifications: * QCA9533, 8 MiB Flash, 64 MiB RAM * One Ethernet Port (10/100) * Wall-plug style case (DAP-1365 with additional socket) * LED bargraph RSSI indicator Installation: * Web UI: http://192.168.0.50 (or different address obtained via DHCP) There is no password set by default * Recovery Web UI: Keep reset button pressed during power-on until LED starts flashing red, upgrade via http://192.168.0.50 * Some modern browsers may have problems flashing via the Web UI, if this occurs consider booting to recovery mode and flashing via: curl -F \ files=@openwrt-ath79-generic-dlink_dap-1330-a1-squashfs-factory.bin \ http://192.168.0.50/cgi/index The device will use the same MAC address for both wired and wireless interfaces, however it is stored at two different locations in the flash. Signed-off-by: Sebastian Schaper --- target/linux/ath79/image/generic.mk | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 46a8705b85..8dc16983e1 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -565,6 +565,33 @@ define Device/devolo_magic-2-wifi endef TARGET_DEVICES += devolo_magic-2-wifi +define Device/dlink_dap-13xx + SOC := qca9533 + DEVICE_VENDOR := D-Link + DEVICE_PACKAGES += rssileds + IMAGE_SIZE := 7936k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | mkdapimg2 0xE0000 +endef + +define Device/dlink_dap-1330-a1 + $(Device/dlink_dap-13xx) + DEVICE_MODEL := DAP-1330 + DEVICE_VARIANT := A1 + DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330 + SUPPORTED_DEVICES += dap-1330-a1 +endef +TARGET_DEVICES += dlink_dap-1330-a1 + +define Device/dlink_dap-1365-a1 + $(Device/dlink_dap-13xx) + DEVICE_MODEL := DAP-1365 + DEVICE_VARIANT := A1 + DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1365 +endef +TARGET_DEVICES += dlink_dap-1365-a1 + define Device/dlink_dap-2695-a1 SOC := qca9558 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct -- cgit v1.2.3