From 6fa94d5e8f8d008dc55eae02ca1b21199d9a8915 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sat, 9 Mar 2019 16:31:17 +0100 Subject: ath79: add support for YunCore A770 YunCore A770 is a ceiling AC750 AP with 2 Fast Ethernet ports, PoE (802.3at) support, based on QCA9531 + QCA9887. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 2x 10/100 Mbps Ethernet (PoE 802.3at support in WAN port) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887), with ext. FEM (SKY85728-11) - 2x regular LED, 1x RGB LED (all driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART header on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to 'Advanced' -> 'Management' -> 'System' and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update 'shadow' file and change hash of root password to something known. - Repack the archive, rename it back to 'bakfile.bin' and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload 'sysupgrade' image and install it (only if previous command succeeded) with command: 'sysupgrade -n -F openwrt-...'. Signed-off-by: Piotr Dymacz --- target/linux/ath79/image/generic.mk | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index fa504ee0fc..c68e6a4a90 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -556,3 +556,11 @@ define Device/xiaomi_mi-router-4q IMAGE_SIZE := 14336k endef TARGET_DEVICES += xiaomi_mi-router-4q + +define Device/yuncore_a770 + ATH_SOC := qca9531 + DEVICE_TITLE := YunCore A770 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += yuncore_a770 -- cgit v1.2.3