From 708b883168e624ede9f5897a55e5e722c6881d76 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= Date: Thu, 14 Apr 2022 12:39:03 +0200 Subject: ath79: add support for Yuncore XD3200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE (cherry picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164) --- target/linux/ath79/image/generic.mk | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 769c0ee1da..33a72358b3 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2528,6 +2528,17 @@ define Device/yuncore_a782 endef TARGET_DEVICES += yuncore_a782 +define Device/yuncore_xd3200 + SOC := qca9563 + DEVICE_VENDOR := YunCore + DEVICE_MODEL := XD3200 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct + IMAGE_SIZE := 16000k + IMAGES += tftp.bin + IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m +endef +TARGET_DEVICES += yuncore_xd3200 + define Device/yuncore_xd4200 SOC := qca9563 DEVICE_VENDOR := YunCore -- cgit v1.2.3